Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FORMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Some applications of aerodynamic formulations to problems in aircraft dynamics

Two applications of mathematical modeling to aerodynamic problems are cussed. The first application is an investigation of the capacity of a nonlinear aerodynamic mathematical model to describe the aerodynamic reactions on an airfoil with a deflecting flap in transonic flow. Flow field computational methods are used to evaluate the nonlinear, unsteady aerodynamic data in terms of characteristic motions called for by the model. Histories of unconstrained motions of the flap are generated from the flap equations of motion, with the aerodynamic reactions specified by the mathematical model. In the second application wing rock is investigated. The most recent model accommodates experimental results wing rock by admitting the existence of aerodynamic hysteresis in the variation of the steady state rolling moment coefficient with roll angle is described.

Schiff, L. B.↗

Rigorous numerical treatment of the no-slip condition in a vorticity formulation

It is shown that a rigorous mathematical treatment of the boundary conditions for rigid no-slip surfaces requires, in general, that two passes be made in solving Poisson's equation. A Fourier solution procedure was the key to this realization. It is also shown that a corresponding method exists for finite and, for the same local approximation, the usual one step method gives the same result for the geometry considered here. The more fundamental two step method gives a new insight into the physical significance of boundary vorticity.

Gazdag, J.↗

A symmetric modal formulation of fluid-structure interaction, including a static approximation to higher order fluid modes

A method of fluid-structure coupling which provides symmetrical matrix equations of standard form solved by existing finite element computer programs is presented. The method postulates that the uncoupled vibration modes of the fluid or the structure be calculated before the coupled analysis. A numerical solution of vibration modes in an axisymmetric container demonstrated that a static approximation to higher order fluid modes can improve the accuracy of dynamic response computations using modal methods.

Macneal, R. H.↗

A generalized formulation of minimum shift keying modulation

The modulator structure consisting of a single-input two-output sequential transducer whose output sequences control the modulated signal in the manner s(t) = x(i)p(t) + y(i)q(t) is considered. Here, iT is less than or equal to t, which is less than iT + T, where T is the modulation bit duration and where x(i) and y(i) take values in /+1, -1, 0/. The behavior of a sequential transducer is characterized by means of a 'trellis'. It is shown that, provided only that the 'carriers' p(t) and q(t) have the same energy in every bit interval, the optimum demodulator for the additive white Gaussian noise channel need process the received signal over only two bit intervals in making each data bit decision. It is demonstrated that particular choices of the sequential transducer yield differential minimum shift keying and differential staggered quadriphase shift keying. Possible generalizations of this approach are discussed.

Massey, J. L.↗

A valid Margules formulation for an asymmetric ternary solution - Revision of the olivine-ilmenite thermometer, with applications

A derivation of a valid asymmetric ternary Margules expression for the excess free energy is presented, and the olivine-ilmenite thermometer is revised accordingly. Although the effect on the thermometer is relatively small, the revision results in improved precision. Estimated temperatures of equilibration are presented for olivine and ilmenite from lunar and terrestrial rocks.

Andersen, D. J.↗

An approximation to multiple scattering in the earth's atmosphere Almucantar radiance formulation

An empirical expression is derived to account for the molecular multiple scattering contribution to the almucantar radiance field. Formulas for the correction factors which incorporate the effects of multiple scattering and nonzero ground albedo are also given. The use and accuracy of the multiple-scattering approximation in direct problems of radiative transfer associated with almucantar radiance are discussed and illustrated by examples. It is shown that in almost all instances, inclusion of the molecular multiple-scattering contribution reduces the errors obtained with the single-scattering approximation by a factor of at least 2.

Box, M. A.↗

Formulation and characterization of polyimide resilient foams of various densities for aircraft seating applications

Light weight, heat and fire resistant low smoke generating polyimide foams are developed for aircraft seating applications. The material is upgraded and classified into groups for fabrication of cushions possessing acceptable comfort properties. Refinement and selection of foaming processes using a variety of previously developd foaming techniques and definition of property relationships to arrive at the selection and classfication of polyimide foams into five groups in accordance with predetermined ILD values are emphasized.

Gagliani, J.↗

Method of making formulated plastic separators for soluble electrode cells

A method making a membrane comprised of a hydrochloric acid-insoluble sheet of a mixture of a rubber and a powdered ion transport material is disclosed. The sheet can be present as a coating upon a flexible and porous substrate. These membranes can be used in oxidation-reduction electrical accumulator cells wherein the reduction of one member of a couple is accompained by the oxidation of the other member of the couple on the other side of the cell and this must be accompained by a change in chloride ion concentration in both sides. The method comprises preparing a mixture of fine rubber particles, a solvent for the rubber and a powdered ion transport material. The mixture is formed into a sheet and dried to produce a microporous sheet. The ion transport material includes particles ranging from about 0.01 to 10 microns in size and comprises from 20 to 50 volume percent of the microporous sheet.

Sheibley, D. W.↗

Context sensitive formulations of antenna pattern correction and side lobe compensation for NOSS/LAMMR real time processing

Large antenna multi-channel microwave radiometer (LAMMR) software specifications were written for LAMMR ground processing. There is a need to determine more computationally-efficient antenna temperature correction methods in compensating side lobe contributions especially near continents, islands and weather fronts. One of the major conclusions was that the antenna pattern corrections (APC) processes did not accomplish the implied goals of compensating for the antenna side lobe influences on brightness temperature. A-priori knowledge of land/water locations was shown to be needed and had to be incorporated in a context sensitive APC process if the artifacts caused by land presence is to be avoided. The high temperatures in land regions can severely bias the lower ocean response.

Chin, R. T.↗

Use of remote sensing for land use policy formulation

Progress in studies for using remotely sensed data for assessing crop stress and in crop estimation is reported. The estimation of acreage of small forested areas in the southern lower peninsula of Michigan using LANDSAT data is evaluated. Damage to small grains caused by the cereal leaf beetle was assessed through remote sensing. The remote detection of X-disease of peach and cherry trees and of fire blight of pear and apple trees was investigated. The reliability of improving on standard methods of crop production estimation was demonstrated. Areas of virus infestation in vineyards and blueberry fields in western and southwestern Michigan were identified. The installation and systems integration of a microcomputer system for processing and making available remotely sensed data are described.

Source record↗

Integrating matrix formulations for vibrations of rotating beams including the effects of concentrated masses

By expressing partial differential equations of motion in matrix notation, utilizing the integrating matrix as a spatial operator, and applying the boundary conditions, the resulting ordinary differential equations can be cast into standard eigenvalue form upon assumption of the usual time dependence. As originally developed, the technique was limited to beams having continuous mass and stiffness properties along their lengths. Integrating matrix methods are extended to treat the differential equations governing the flap, lag, or axial vibrations of rotating beams having concentrated masses. Inclusion of concentrated masses is shown to lead to the same kind of standard eigenvalue problem as before, but with slightly modified matrices.

Lakin, W. D.↗

Alternative formulations of magnetospheric plasma electrodynamics

The fundamental equations of magnetospheric plasma electrodynamics are considered from a theoretical standpoint that stresses the basic equivalence of various seemingly different formal representations. The mathematical properties of vector fields are reviewed, and their implications in electrodynamics are studied. The irrotational and solenoidal parts of the electric field are associated with two physically distinct types of sources. Relativistic covariance and gauge invariance in electromagnetic theory are reviewed and discussed in the context of an approach in which the mathematical properties of vector fields are taken as primary concepts. Special attention is given to the use and interpretation of the Coulomb gauge potential functions. This choice of gauge is sometimes regarded with undue suspicion, possibly because of a certain paradox concerning causality. The paradox is discussed and resolved. Useful properties of the Coulomb gauge are identified. These need not be limited to the case of slow time variations and can extend beyond the limits of validity of ideal MHD theory.

Cragin, B. L.↗

Finite element formulation for transient heat treat problems

The macrothermomechanical behavior of materials subjected to rapid thermal or mechanical loading such as occurs in most heat treatments is described. The equations are developed for Lagrangian, Eulerian, and intermediary kinematic descriptions and are independent of the constitutive laws and the equation of state; they can be solved numerically for a specified material and boundary conditions. The coupled transport effects between dissipation and energy are included. The conventional linearized stability approach indicates the numerical procedure to be stable, with certain restriction on the time step size.

Mullen, R. L.↗

Use of remote sensing for land use policy formulation

Research projects described include: (1) identifying coniferous forest types in Michigan using LANDSAT imagery; (2) investigating synoptic temperature patterns in Michigan as determined via GOES and HCMM thermal imagery; (3) land surface change detection using satellite data and a geographic data base; (4) determining soil map unit composition by electronic scanning densitometry; and (5) delimiting areas of virus infection in vineyards and blueberry fields in southwestern and western Michigan. Contractual activities involve important farmlands inventory, changes in aquatic vegetation in Saginaw Bay, digitized soil association map of Michigan, and aerial photography for hybrid-poplar research. On-going projects are also being conducted in Jamaica, Honduras, the Dominican Republic and Kenya.

Source record↗

A preconditioned formulation of the Cauchy-Riemann equations

A preconditioning of the Cauchy-Riemann equations which results in a second-order system is described. This system is shown to have a unique solution if the boundary conditions are chosen carefully. This choice of boundary condition enables the solution of the first-order system to be retrieved. A numerical solution of the preconditioned equations is obtained by the multigrid method.

Phillips, T. N.↗

Formulation and Characterization of Epoxy Resin Copolymer for Graphite Composites

Maximum char yield was obtained with a copolymer containing 25% mol fraction DGEBE and 75% mol fraction DGEBA (Epon 828). To achieve the high values (above 40%), a large quantity of catalyst (trimethoxyboroxine) was necessary. Although a graphite laminate 1/8" thick was successfully fabricated, the limited life of the catalyzed epoxy copolymer system precludes commercial application. Char yields of 45% can be achieved with phenolic cured epoxy systems as indicated by data generated under NAS2-10207 contract. A graphite laminate using this type of resin system was fabricated for comparison purposes. The resultant laminate was easier to process and because the graphite prepreg is more stable, the fabrication process could readily be adapted to commercial applications.

Keck, F. L.↗