Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Utah FORGE 2439: Well 16B(78)-32 Field-Test Data from Mini-Frac Tests

This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. The test is a hydraulic fracture test that involves injecting a small volume of water into a short interval of the reservoir that is isolated by a straddle packer to create a fracture. The test provides information about the minimum and maximum horizontal stress at the test depths. A total of seven mini-frac tests were performed within the upper (vertical or nearly vertical) section of the 9-5/8-inch diameter uncased wellbore, between depths of 5,202 ft MD [5,202 ft TVD] and 5,980 ft MD [5966.18 ft TVD]. Two types of data were generated as part of the mini-frac tests. The first type of data is time-series data for each mini-frac test (e.g., injection-rate, test-interval pressure), and are contained in the "Mini-Frac Test Data.zip" file below. The second type is geophysical log data, attached below in the "Geophysical Logs.zip" file. Here, two types of image logs and acoustic logs were obtained before and after the mini-frac tests to examine each test depth for visual evidence of induced fracture(s) and to measure the azimuth (orientation) of any observed fractures. The attached Readme file includes the test depth information and contents of each data file included here. Analysis of the field-test data was conducted and is documented in the attached report below.

15 GEOTHERMAL ENERGY↗

2017 Western Passage Tidal Energy Resource Characterization Measurements

These data are from tidal resource characterization measurements collected between April and July 2017 in Western Passage near Eastport, Maine, USA. The dataset contains the following four sub-datasets, each of which is described in more detail in the README.pdf. 1. A bottom-mounted Teledyne RDI Workhorse 600 kHz acoustic Doppler current profiler (ADCP) was deployed at 44.92015 N, 66.98915 W in ~50 m of water from 3 April to 18 July (106 days). Data were recorded in 6-minute increments in the ENU (East, magnetic North, Up) coordinate system with bin-mapping enabled. 2. A bottom-mounted Nortek Signature 500 kHz ADCP was deployed at 44.92192 N, 66.98913 W in ~50 m of water from 4 April to 18 July (105 days). Data were sampled and recorded at 2 Hz and recorded in the ENU (East, magnetic North, Up) coordinate system. 3. Between those stations along a cross-channel transect, a Stable Tidal Turbulence Mooring (STTM) positioned ~10 m above the seabed was deployed for one week during a spring tide. The STTM was outfitted with two Nortek Vector acoustic Doppler velocimeters equipped with inertial motion units (ADVs), a bottom-tracking downward-looking Teledyne RDI Workhorse 600 kHz ADCP to provide motion-corrected flow and turbulence characteristics at high temporal resolution, and an upward-looking Teledyne RDI Sentinel V20 ADCP. The STTM was deployed at 44.92098 N, 66.98922 W from 24-31 May. 4. A vessel-mounted Teledyne RDI Workhorse 300 kHz ADCP collected current data along three transects over two days, 4-5 April. The data processing used DOLfYN version 0.11.2. All hdf5 files (i.e., files ending in `.h5`) contained here can be opened using that version of DOLfYN (e.g., `dat = dolfyn.load('')`). All distances are in meters (e.g., depth, range, MLLW, hab, eta, z_), and all velocities in m/s. See the DOLfYN documentation https://lkilcher.github.io/dolfyn/), and/or the Nortek and Teledyne RDI documentation for additional details. Additional details on the dataset can be found in the README.pdf, including: - Format details of each data file. - How to regenerate the data-processing (using the files in the `wp2017_processing.zip` archive).

16 TIDAL AND WAVE POWER↗

CODAS Data from Oliktok Point, Beaufort Sea, Alaska

Cryosphere/Ocean Distributed Acoustic Sensing (CODAS) data collected from the Beaufort Sea, Alaska, using ~37.4 km of dark telecommunications fiber located at Oliktok Point, Alaska. Data were collected with a Silixa iDAS, using 10 m gauge length, 2 m spatial resolution, and 1000 Hz sample rate. Provided here are the DAS-recorded time series for the rapid refreeze event described in Baker & Abbott (2022) (see link below). This covers a date range of 2021-11-10 15:00 UTC to 2021-11-11 17:00 UTC. Data have been decimated to 100 Hz and 20 m (i.e., every 10th channel for 1831 channels, total), as used in Baker & Abbott (2022). Data have been extracted from raw format into 1-hour long .sac* files and organized into directories by channel number, spanning channels 100 to 18400. Time series units are nano-strainrate (nm/m/s). For distribution, data have been compressed into .zip files containing all time series files for 100 channels. *For information on the Seismic Analysis Code (SAC) file format: https://seiscode.iris.washington.edu/projects/sac

16 TIDAL AND WAVE POWER↗

In-Situ Blade Strain Measurements of a Crossflow Turbine Operating in a Tidal Flow

This data was collected between October 25 and December 12 of 2022 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine deployment platform (TDP). The goal was to collect blade strain data from a crossflow turbine operating in a tidal flow. A table in ('Deployment Schedule.PNG') outlines the various dates when each instrument was operational, and more details can be found via literature listed in 'Related Publications'.txt. This dataset includes zipped folders for each instrument containing data in .csv files for the relevant duration specific to each instrument, along with separate README file for each measurement. Some instrument files are quite large and can pose a challenge for a visual spreadsheet editor to open. A processing software like MATLAB or Python is recommended. All data contained in this submission is unfiltered/unprocessed data unless otherwise noted in the README file. Blade strain was measured using 8 foil-based strain gauges along the span of a single turbine blade. Water currents were measured using Acoustic Doppler Current Profilers (ADCP's) and Acoustic Doppler Velocimeters (ADV's) both upstream and downstream of the turbine for inflow, wake and turbulence measurements. Electrical power output was measured using the Voltsys rectifier. Shaft speed was calculated based on the Voltsys measurements of the permanent magnet three phase generator AC generation frequency, coupled directly to the cross flow turbine under test (i.e., no gear box). Platform motions were captured using a Yost IMU (inertial measurement unit). Turbine thrust loading was measured using a reaction arm about the turbine deployment platform spanning beam, where two bi-directional load cells were connected to the system via a pinned connection. The TDP is a floating structure moored on the Portsmouth facing side of Memorial Bridge pier #2, which spans the Piscataqua River between Portsmouth, NH and Kittery, ME. The Piscataqua River connects the Great Bay Estuary to the Gulf of Maine and the river currents are dominated by tidal flow with water velocities exceeding 2.5 m/s during spring ebb tides at this site which were previously characterized by Chancey 2019. The turbine under test was a modified New Energy Corporation (Calgary, CA) model EVG-025 4-blade H-Darrius type vertical axis cross flow turbine that rotates in the clockwise direction with a rotor diameter of 3.2m and blade length of 1.7m. The hydro-foil profile was a NACA 0021 with a 10 inch chord length and a blade preset pitch angle of +4deg with a positive angle corresponding with the toe in direction. The standard EVG-025 has a rotor diameter of 3.4m and its rated power output is 25kW at 3 m/s. The rotor diameter was reduced to accommodate the size of the existing TDP moon-pool. A single blade of this turbine was further modified to accommodate 8 full-bridge strain gauges (Bharath et al 2023, Bichanich et al 2024). For power performance and other relevant details on the turbine and its characteristics, see O'Byrne 2022.

16 TIDAL AND WAVE POWER↗

Underwater Target Detection Software Demonstration on the RivGen Turbine

This repository contains data and processing scripts necessary to train the object detection models utilized in the underwater target detection software demonstration on the RivGen turbine project and to produce performance metrics (precision, recall, mAP50, mAP50-95). - Contents - Data consist of "images" and "labels". Each image has an associated label, both share the same time string in its file name (e.g., 2024_05_25_09_01_57.98.jpg and 2024_05_25_09_01_57.98.txt). Time strings have the format %yyyy_%mm_%dd_%HH_%MM_%SS.%3f. Images and labels were curated from 2021 and 2024 smolt outmigration periods at the project site in Igiugig, AK. Images are monochrome 8-bit images of objects (smolt, debris, and other) passing through the field of view of the deployed cameras during various operational stages of the RivGen turbine. Labels are text files indicating the class and bounding polygon of each object in an image. The provided labels use the "YOLO" label format. - Requirements - Python3.8+ is required to install and run the train and validation script. The README.md provides instruction for installing the requirements from the requirements.py file. - Instructions - The "example_train.py" file ingests the provided data, trains a model, and produces model performance metrics at completion. NOTE: model performance metrics will vary from run to run as a consequence of the random selection of training and validation data.

16 TIDAL AND WAVE POWER↗

Drifting Acoustic Measurements around C-Power's SeaRay WEC

The repository contains underwater noise measurements and associated metadata collected around C-Power's SeaRay wave energy converter on July 15, 2024 and July 16, 2024 while it was deployed at the U.S. Navy's Wave Energy Test Site (WETS) in Kaneohe, HI. Measurements were obtained using Drifting Acoustic Instrumentation SYstems (DAISYs). DAISYs consist of a surface expression connected to a hydrophone recording package by a tether. Both elements are instrumented to provide metadata (e.g., position, orientation, and depth). Information about how to build DAISYs is available at https://www.pmec.us/research-projects/daisy. The repository's primary content is a compressed archive (.zip format), containing multiple MATLAB binary data files (.mat format). The structure of each file is included in the repository as a Word document (Data Description MHK-DR.docx). Each file contains time series information for a single DAISY deployment (file naming convention: WETS_DAISY_[Drift #].mat) consisting of processed hydrophone data and associated metadata. During these measurements, C-Power's SeaRay was located at approximately 21.48112 N, 157.74451 W.

16 TIDAL AND WAVE POWER↗

NOvA Inclusive Nue CC Cross Section Data Release

NOvA inclusive electron neutrino cross section results presented at Neutrino2020Exposure:8.09E20 protons-on-target, neutrino-enhanced beamData release contains 3 ROOT files containing the double-differential measurement with respect to electron angle (cos theta) and electron energy, a single-differential measurement with respect to squared four-momentum transfer (Q2), and the total cross section as a function of neutrino energy. The 1D cross-section measurements include the same kinematic phase space restrictions present in the double-differential analysis.The files, xsec_{dThdE/Enu/dQ2}.root, contain the extracted cross section and associated covariance matrices for the double-differential cross section with respect to the observed electron kinematics, dThdE, neutrino energy, Enu, and squared four-momentum transfer, Q^2.In each file there will be the following histograms:— TH2D/TH1D xsec: unfolded measured cross section— TH2D xsec_cov: cross section covariance matrix— TH2D stat_cov: statistical covariance matrixIncludes text files, xsec_{dThdE/Enu/dQ2}.txt show the corresponding histograms in plain text format.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Official data release for Bayes 2022 paper, arXiv:2311.07835

Official data release to accompany the first NOvA Bayesian results paper, https://arxiv.org/abs/2311.07835. The included `README.md` below describes the contents more fully, but in short, included here are: * A `README.md` describing the files * Four `.root` files containing marginal posterior densities in neutrino oscillation parameters, and associated 1D and 2D credible regions derived from them * One `.root` file containing a `TTree` with Markov Chain Monte Carlo samples, which can be used to recreate the posteriors above. **Please use the URL below to download this large (2GB) file** https://mod.fnal.gov/cwsmod/n/nova_docdb_ext/arxiv-2311.07835.data-release.mcmcsamples.root * One Jupyter notebook giving extensive examples how the MCMC samples above can be used

Collaboration, NOvA↗

Pan-arctic river bank erosion and accretion, and planform metrics measured over intervals ranging from 1973 to 2016

This dataset provides the tabular summary of analysis of 17 reaches of 15 Arctic rivers for river bank erosion and accretion rates, as well as, river channel properties such as channel width, bank curvature, and the aspect/orientation of the river banks. These rivers include the: Chandalar River, Alaska, Colville River, Alaska; Indigirka River, Russia; Kolyma River, Russia; Koyukuk River, Alaska; Lena River, Alaska; Noatak River, Alaska; Ob River, Russia; Pechora River, Russia; Tanana River, Alaska, Selawik River, Alaska; Taz River, Russia; Yana River, Russia; Yenisei River, Russia; and the Yukon River, Alaska. The dataset was generated from a total of 129 images including: Landsat, higher resolution satellite imagery, and aerial photography over time periods ranging from the 1970s and 2016. A full list of the image dates, row and path (for Landsat), and pixel resolutions is provided in the dataset. Masks for the Chandalar River, Tanana River, and Yukon at Holy Cross were obtained from Brown et al. (2020). The masks were analyzed using the Spatially Continuous Riverbank Erosion and Accretion Measurements (SCREAM) software detailed in Rowland et al. 2016. The masks used in this analysis can be found an accompanying dataset (doi:10.15485/1571527).In files with “summary” in the name, the data is provided at a pixel level, where each mapped bank pixel has an associated erosion or accretion value, a channel width, a curvature value, and an aspect each river and time period will have an individual file. Files with “Segments” in name provide data that is averaged along segments of the rivers. These data are consolidated into a single file each for the erosion and accretion measurements. These segments are approximately 10 channel widths in length. In addition to erosion and accretion rates, the segment-based results include area measurements of erosion and accretion, islands, and channels. Revisions 2023:-Data added for the Koyukuk River for time periods of 1978-2012, 1978-2018, and 2012-2018. ---Data added from the Chandalar River, Tanana River, and Yukon River at Holy Cross based on masks obtained from Brown et al. (2020).-Updated the values for Drainage area and river slope, see methods below-Added values for meant topographic slope for upstream contributing area, long term averaged annual maximum monthly flow, average annual maximum monthly flow for the time period of erosion record, and added the river slope extracted from the Lin et al. (2020) data product.-Add field for River Planform Multi threaded (M) or Single threaded-Added ‘ConsolidatedErosionSegments.csv’ which provides the same data as AllRiversErosionSegments.csv rebinned with averages along river segments based on upstream drainage area instead of channel segments based on lengths set to approximately 10 channel widths.

54 ENVIRONMENTAL SCIENCES↗

Gap-filled water quality, Normalized Differenced Vegetation Index, total nitrogen (nitrate and ammonia) deposition, and land cover data trends for the Continental United States

The purpose of this work was to quantify trends in water quality, total nitrogen deposition, vegetation, and land-use trends for the Continental United States (CONUS). This dataset contains gap-filled daily and yearly in-stream carbon (C) and nitrogen (N) concentrations, discharge, and calculated exports from United States Geological Survey (USGS) National Water Information System (NWIS) stations across the United States of six different nitrogen parameters (Supplementary Table A1), one carbon parameter, and temperature (USGS, 2016, 2018) (https://waterdata.usgs.gov/nwis). The final water quality dataset is merged with the normalized differenced vegetation index (NDVI), total deposition (TDEP), landcover, and elevation datasets. All data are available at the CONUS scale as well as at the scale of hydrologic unit codes: (HUC) HUC8, HUC6, HUC4, and HUC2 watersheds. There are two zip files associated with this data package. I split the data into two equal sized zip files to comply with the data size limits, however the datasets are the same within each zip file. All data files can be read in directly into the R software.

54 ENVIRONMENTAL SCIENCES↗

Kinetics Data of Iron(II), Manganese(II), Dissolved Organic Carbon and Nitrate from Batch Incubation Experiments Using Hyporheic Sediments from the East River Watershed, Colorado.

Hyporheic zones act as critical ecological links between terrestrial and aquatic systems where redox-sensitive metals of iron (Fe) and manganese (Mn) significantly impact nutrient cycling and water quality. In order to understand the production, release and speciation of Fe(II) and Mn(II) in groundwater, we conducted batch incubation experiments using sediment samples from a hyporheic zone of the East River floodplain in Colorado. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. Collection and processing of the data is described in the Methods, along with details of data file contents. There are 6 data files provided in two formats: 1 zip-folder of .csv (open source) files, and 1 zip-folder of .xlsx (Excel) files. The data tables provided in the two formats are the exact same.

54 ENVIRONMENTAL SCIENCES↗

Onslow Beach Washover Fan Morphology from 2012 to 2015

Critical military training and testing on lands along the nation’s coastal and estuarine shorelines are increasingly placed at risk because of encroachment pressures in surrounding areas, impairments due to other anthropogenic disturbances, and changes in climate and sea level. The U.S. Department of Defense (DoD) intends to enhance and sustain its training and testing assets and also optimize its stewardship of natural resources through the development and application of an ecosystem-based management approach on DoD installations. To accomplish this goal, particularly for installations in estuarine/coastal environments, the Strategic Environmental Research and Development Program (SERDP) launched the Defense Coastal/Estuarine Research Program (DCERP) as a 10-year effort at Marine Corps Base Camp Lejeune (MCBCL) in North Carolina. The results of the second 5 years of the program (DCERP2) are presented in the DCERP2 Final Report.There were four overarching objectives of DCERP2. The first objective was to understand the effects of climate change impacts, including warming temperatures, variability in the hydrological cycle, storm events, and sea level rise on the coastal ecosystems at MCBCL from observations and measurements made over the 10-year program. The second objective was to understand the carbon cycle of the coastal and terrestrial ecosystems at MCBCL through a highly integrated sampling program. The third objective was to develop models, tools, and indicators to evaluate current and projected future ecosystem state changes and translate scientific findings into actionable information for installation managers. The last objective was to recommend adaptive management strategies to sustain ecosystem natural resources within the context of an active military installation.These grid files were created from data collected using a Riegl 3-D laser scanner. Millions of x, y, and z points from the F2 Washover Fan on Onslow Beach were processed using the MARS software package to define a bare-earth model. Grid files were imported into Golden Software Surfer version 19 for editing and exported from that application as .grd files. Files can be opened in Surfer or ArcMap, but the coordinate system information will be lost if opened in ArcMap. These data were collected to quantify the morphological changes that occur on a washover fan through time.

54 ENVIRONMENTAL SCIENCES↗

Numerical Modeling Experiments of Combined Effects of Ice and Permafrost on Delta Morphodynamics

This dataset contains output from numerical model experiments to test the combined effects of ice thickness and permafrost erodibility on delta dynamics. All experiments were conducted using DeltaRCM, a reduced complexity cellular model. Details of the model setup and experiments are described in full in Piliouras et al., (in revision). This dataset contains results from a total of 48 experiments, representing 16 different experimental conditions, each of which was run in triplicate. There is a control run (3 total experiments) with no ice and no permafrost. We used permafrost erodibilities (here described as erodibility relative to that of non-permafrost, and therefore < 1) of 0.65, 0.8, and 0.95, where 0.95 represents permafrost being only 5% less erodible than non-permafrost. We used ice thicknesses of 0.5 m, 3 m, and 4.5 m in a 5 m deep basin. We conducted experiments for each possible combination of permafrost erodibility and ice thickness (9 conditions, 27 experiments). We also provide results for experiments with only ice or permafrost (6 conditions, 18 experiments). The excel table (csv file) provides the ice and permafrost conditions for each run ID. Zip files contain model outputs and other variables generated during analysis (see ReadMe file) as numpy arrays (.npy files), which can be accessed using python.

54 ENVIRONMENTAL SCIENCES↗

Data from: "Growth strategies and threshold responses to water deficit modulate effects of warming on tree seedlings from forest to alpine"

This data package contains data that were used to support conclusions drawn in “Growth strategies and threshold responses to water deficit modulate effects of warming on tree seedlings from forest to alpine”, by Lazarus, Castanha et al. 2017. Data were collected at field sites within the Alpine Treeline Warming Experiment (ATWE) on Niwot Ridge, Colorado, USA, and at the U.S. Geological Survey laboratory located in Boise, Idaho. This archive contains comma-separated-values (.csv) files, as well as the same files in Microsoft Excel (.xlsx) format, which can be opened by either Microsoft Excel, R, or any simple text editor program. There are two types of geospatial data files: .kml and ESRI shapefiles (.shp). The kml files contain placemarks, which can be opened by Google Earth, or Google Maps. The ESRI shapefiles can be opened by any geographic information system application that can read shapefiles, including ESRI's entire ArcGIS suite, and QGIS. We asked whether and how tree species differences in response to water deficit relates to their establishment along the gradient from forest to alpine. To do this, we compared growth and moisture stress responses in first-year seedlings of three species planted in common gardens subject to a factorial of heating and watering treatments below, at, and above tree line. This combination of an elevation gradient alongside warming and watering treatments enabled us to observe species differences in seedling responses to a broad set of climatic conditions.Entire seedlings were harvested at c. 3- and again at 9 weeks of age following germination/emergence in the experimental plots, and we then measured dry mass (DM) of above and belowground parts, root length, root mass fraction (RMF), relative growth rates (RGRs) from seed to 3 weeks and from 3 to 9 weeks, turgor-loss point (TLP), and photosynthetic WUE (as δ13C). Also included in this dataset (but not described in the manuscript) are measures of specific leaf area (SLA) and other variables generated by pressure-volume curves (saturated water content, osmotic potential at full turgor, elastic modulus).

54 ENVIRONMENTAL SCIENCES↗

Nitrate, ammonium, and DON mass time series output for East River stream, vadose zone and groundwater subwatersheds from HAN-SoMo model

There is a growing understanding of the role that bedrock weathering can play as a source of nitrogen (N) to soils, groundwater and river systems. The significance is particularly apparent in mountainous environments where weathering fluxes can be large. However, our understanding of the relative contributions of rock-derived, or geogenic, N to the total N supply of mountainous watersheds remains poorly understood. This dataset contains model output from the High-Altitude Nitrogen Suite of Models (HAN-SoMo), a watershed-scale ensemble of process-based models to quantify the relative sources, transformations, and sinks of geogenic and atmospheric N through a mountain watershed. Our study is based in the East River Watershed (ERW) in the Upper Colorado River Basin. The East River is a near-pristine headwater watershed underlain primarily by an N-rich Mancos Shale bedrock, enabling the timing and magnitude of geogenic and atmospheric contributions to watershed scale dissolved N-exports to be quantified. Six calibration scenarios were developed to explore equifinality using >1600 N concentration measurements from streams, groundwater, and vadose zone samples collected over the course of four years across the watershed, from 2014-2018. The files in this dataset are named according to which calibration scenario they represent (1, 2, 3, NM1, NM2, and NC), and include daily time series model output of nitrate, ammonium and dissolved organic nitrogen concentrations for all six calibration scenarios described in Maavara et al., 2021, "Modeling geogenic and atmospheric nitrogen through the East River Watershed, Colorado Rocky Mountains," PLOS One (in press), for the stream, vadose zone, and groundwater in the five discretized subwatersheds: Rustlers Gulch, Copper Creek, East above Quigley (EAQ), the Middle East River (ME), and Lower Triangle (LT) from Gothic to the Pumphouse. The READ_ME.txt file includes details on units and naming conventions in each of these files. Model files are in .mat format, to be opened in MATLAB.

54 ENVIRONMENTAL SCIENCES↗

Data for "Relative Reactivity and Bioavailability of Mercury Sorbed to or Coprecipitated with Aged Iron Sulfides"

The potential for inorganic mercury (Hg) to be converted to methylmercury depends, in part, on the chemical form of Hg and its bioavailability to anaerobic microorganisms that can methylate Hg. In anaerobic settings, Hg can be associated with sulfide phases, including ferrous iron sulfide (FeS), which can sorb or coprecipitated with Hg. The objective of this study was to determine if the aging state of FeS alters the Hg coordination environment as well as the reactivity and bioavailability of sorbed and coprecipitated Hg species. FeS particles were synthesized with and without Hg2+ and aged in anaerobic conditions for multiple time frames spanning from 1 hour to 1 month. For FeS particles synthesized without Hg, Hg2+ was subsequently sorbed to the FeS for 1 day. Analysis of Hg speciation of these materials by X-ray absorption near edge spectroscopy revealed a predominance of 4-coodinate Hg-S species in the sorbed Hg-FeS solids and a mixture of 2- and 4-coordinate Hg-S in the coprecipitated Hg-FeS. The leaching potential of the Hg was assessed by exposing the particles to a solution of dissolved glutathione (a thiolate-based Hg chelator). As expected, the sorbed Hg-FeS released more soluble Hg compared to the co-precipitated Hg-FeS. However, when these particles were exposed to Desulfovibrio desulfuricans ND132 (a known Hg methylator), more Hg was methylated from the co-precipitated Hg-FeS than the sorbed Hg-FeS, consistent with expectations from the Hg-S coordination state and inconsistent with the selective leaching results. Overall, these results suggest that the bioavailability of particulate Hg cannot be easily discerned by leaching potential into bulk solution. Rather, bioavailability entails more subtle interactions at particle-cell interfaces and perhaps correlates with the local Hg-S coordination state in the particles. This data package contains data shown in the referenced publication, including all figures. Each figure is available in the respective *.csv file and a summary of all files are also included in the the xlsx file. Additional formatted data include X-ray diffraction data of the FeS solids are also available in a HPF format (Panalytical software), X-ray absorption spectroscopy data as *.prj files (Athena), and X-ray fluorescence data in its raw data form.

54 ENVIRONMENTAL SCIENCES↗

Templates for developing and versioning data standards and reporting formats using GitHub

This data package contains three templates that can be used for creating README files and Issue Templates, written in the markdown language, that support community-led data reporting formats. We created these templates based on the results of a systematic review (see related references) that explored how groups developing data standard documentation use the Version Control platform GitHub, to collaborate on supporting documents. Based on our review of 32 GitHub repositories, we make recommendations for the content of README Files (e.g., provide a user license, indicate how users can contribute) and so 'README_template.md' includes headings for each section. The two issue templates we include ('issue_template_for_all_other_changes.md' and 'issue_template_for_documentation_change.md') can be used in a GitHub repository to help structure user-submitted issues, or can be modified to suit the needs of data standard developers. We used these templates when establishing ESS-DIVE's community space on GitHub (https://github.com/ess-dive-community) that includes documentation for community-led data reporting formats. We also include file-level metadata 'flmd.csv' that describes the contents of each file within this data package. Lastly, the temporal range that we indicate in our metadata is the time range during which we searched for data standards documented on GitHub.

54 ENVIRONMENTAL SCIENCES↗

Data from : "Warming promotes loss of subsoil carbon through accelerated degradation of plant-derived organic matter". Blodgett warming experiment

This dataset contains data used for the paper: Warming promotes loss of subsoil carbon through accelerated degradation of plant-derived organic matter. Soil Biology and Biochemistry 156, 108185. doi:10.1016/j.soilbio.2021.108185On April 2018 (after 4.5 years of warming), we collected O-horizon (organic horizon) material and soil core down to 90 cm depth from a whole-soil warming experiment in a mixed-coniferous temperate forest, located at the University of California Blodgett experimental forest in the foothills of the Sierra Nevada, CA USA. The goal was to assess how 4.5 years of +4 °C whole-soil warming affected the quantity and quality of soil organic matter. Cores were collected from 6 experimental plots (three replicated blocks); samples were collected in 10 cm increments from 0 to 90 cm depth.This dataset contains a compressed (.zip) archive of the data used for this manuscript. The dataset includes files in .xlsx format, which can be accessed and processed using MS Excel or R. Carbon and nitrogen concentrations, as well as stable carbon isotope composition ((δ13C) and solvent extractable lipid biomarker (alkanoic acids and alkanes) data are provided as processed data files. Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy data are provided as raw output and processed data files.The dataset files "Blodgett_warming_Data" and "Blodgett_warming_raw_data.xlsx" were updated on July 7, 2021. The following updates were made: (1) specification of the units of measurements in the dataset (the unit of measurement was missing in some parameters) and (2) the column name "pulled depth" was changed to "pooled depth" in the updated data files.

54 ENVIRONMENTAL SCIENCES↗