Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC PULSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Phase Rotation Scheme To Combine an RF Technique With Laser-Plasma Interaction For Real Applications Of Laser-Produced Ions

A phase rotation scheme of laser-produced ions from a solid target by the application of a synchronized RF electric voltage with a pulsed laser has been experimentally investigated with the use of a 100 TW laser, J-KAREN at JAEA, KPSI. Up to now, energy peaks of up to around 2.0 MeV have been created with a FWHM of 2.6% with good reproducibility using a two-gap resonator of a quarter wave length with the same frequency as the source laser (approx80 MHz). It is also found that the position of the peak can be well controlled by adjusting the relative phase between the RF electric field and the laser, which is very promising for real applications of such laser-produced protons. In order to also apply such a phase rotation system for higher energy protons (<200 MeV), a scheme to use a small linear accelerator (LINAC) with multi-gaps is proposed as a phase rotator. With multi-gap structure, alternating focusing between longitudinal and transverse degrees of freedoms can be realized. From the point of compactness and realizing a small focused spot, however, a scheme combining separate quadrupole magnets just before and after the RF cavity excited with the Wideroee mode, might be more effective. The scheme presented here will realize laser-produced ions (protons) with good reproducibility by combining with RF technology.

43 PARTICLE ACCELERATORS↗

Internal electron conversion of the isomeric {sup 57}Fe nucleus state with an energy of 14.4 keV excited by the radiation of the plasma of a high-power femtosecond laser pulse

We recorded the spectrum of delayed secondary electrons ejected from the target, which was coated with a layer of iron enriched with the {sup 57}Fe isotope to 98%, under its irradiation by fluxes of broadband X-ray radiation and fast electrons from the plasma produced by a femtosecond laser pulse at an intensity of 10{sup 17} W cm{sup -2}. Maxima were identified at energies of 5.6, 7.2, and 13.6 keV in the spectrum obtained for a delay of 90 - 120 ns. The two last-listed maxima owe their origin to the internal electron conversion of the isomeric level with an energy of 14.4 keV and a lifetime of 98 ns to the K and L shells of atomic iron, respectively; the first-named level arises from a cascade K - L{sub 2}L{sub 3} Auger process. Photoexcitaion by the X-ray plasma radiation is shown to be the principal channel of the isomeric level excitation. (interaction of laser radiation with matter)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Intensity clamping measurement of laser filaments in air at 400 and 800 nm

Molecular N{sub 2} fluorescence excited by laser filaments formed from laser pulses at 400 and 800 nm propagating in air is investigated. A comparison showed that, when excited with 400 nm photons, the fluorescence from the first negative band of N{sub 2}{sup +} was enhanced by a factor of 6.4 while that of the second positive band of neutral N{sub 2} remained relatively constant. The enhanced N{sub 2}{sup +} signal is attributed to a more efficient inner-shell multiphoton process (to the B{sup 2{Sigma}}{sub u}{sup +} state) at 400 nm leaving a larger population of N{sub 2}{sup +} ions in the excited state. On the other hand, the stable fluorescence from neutral N{sub 2} is due to the fact that the plasma density is more or less the same at both wavelengths. Using these results, a theoretical model is developed to determine the clamped intensities of the laser filaments at 400 and 800 nm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE MOST SLOWLY DECLINING TYPE Ia SUPERNOVA 2001ay

We present optical and near-infrared photometry, as well as ground-based optical spectra and Hubble Space Telescope ultraviolet spectra, of the Type Ia supernova (SN) 2001ay. At maximum light the Si II and Mg II lines indicated expansion velocities of 14,000 km s{sup -1}, while Si III and S II showed velocities of 9000 km s{sup -1}. There is also evidence for some unburned carbon at 12,000 km s{sup -1}. SN 2001ay exhibited a decline-rate parameter of {Delta}m{sub 15}(B) = 0.68 {+-} 0.05 mag; this and the B-band photometry at t {approx}> +25 day past maximum make it the most slowly declining Type Ia SN yet discovered. Three of the four super-Chandrasekhar-mass candidates have decline rates almost as slow as this. After correction for Galactic and host-galaxy extinction, SN 2001ay had M{sub B} = -19.19 and M{sub V} = -19.17 mag at maximum light; thus, it was not overluminous in optical bands. In near-infrared bands it was overluminous only at the 2{sigma} level at most. For a rise time of 18 days (explosion to bolometric maximum) the implied {sup 56}Ni yield was (0.58 {+-} 0.15)/{alpha} M{sub sun}, with {alpha} = L{sub max}/E{sub Ni} probably in the range 1.0-1.2. The {sup 56}Ni yield is comparable to that of many Type Ia SNe. The 'normal' {sup 56}Ni yield and the typical peak optical brightness suggest that the very broad optical light curve is explained by the trapping of {gamma} rays in the inner regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Robust quantum gates via a photon triggering electromagnetically induced transparency

We propose a scheme to achieve a parallelized controlled-NOT (c-not) gate based on electromagnetically induced transparency (EIT) and cavity-assisted photon scattering. By using the flying photon as the control bit, we can implement a conditional transfer between two logical states of an atom trapped in the cavity with high fidelity and on a microsecond time scale. Thanks to the fact that the photon is well suited for scalable quantum computation, a quantum c-not gate between the single-photon pulses and the nonlocal gate on remote atoms are obtained by reflecting the photon pulse from an optical cavity with a single-trapped atom. Our protocol is robust for spontaneous emission and works quite well in the bad-cavity limit, which makes it more applicable in the laboratory with current experimental techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integration of optical fibers in radiative environments: Advantages and limitations

We review the advantages and limitations for the integration of optical fibers in radiative environments. Optical fibers present numerous advantages for applications in harsh environments such as their electromagnetic immunity. This explains the increasing interest of the radiation effects community to evaluate their vulnerability for future facilities. However, it is also well-known that optical fibers suffer from a degradation of their macroscopic properties under irradiation. We illustrate the major mechanisms and parameters that govern the degradation mechanism, mainly the radiation-induced attenuation phenomena. We focus on the fiber transient radiation responses when exposed to the pulsed and mixed environment associated with the Megajoule class lasers devoted to the fusion by inertial confinement study. (authors)

36 MATERIALS SCIENCE↗

Coupling output of multichannel high power microwaves

The coupling output of multichannel high power microwaves is a promising technique for the development of high power microwave technologies, as it can enhance the output capacities of presently studied devices. According to the investigations on the spatial filtering method and waveguide filtering method, the hybrid filtering method is proposed for the coupling output of multichannel high power microwaves. As an example, a specific structure is designed for the coupling output of S/X/X band three-channel high power microwaves and investigated with the hybrid filtering method. In the experiments, a pulse of 4 GW X band beat waves and a pulse of 1.8 GW S band microwave are obtained.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Laser synthesis and modification of composite nanoparticles in liquids

The works devoted to the formation and modification of nanoparticles using laser ablation of solid targets in liquids are reviewed. Several approaches to implement laser ablation in liquids, aimed at synthesising nanoparticles of complex composition, are considered: direct laser ablation of a target of corresponding composition, laser ablation of a combined target composed of two different metals, laser irradiation of a mixture of two or more colloidal solutions, and laser ablation in reactive liquids. The properties of two-component bimetallic systems (Ag - Cu, Ag - Au), semiconductor nanocrystals (ZnO, CdSe), chalcopyrite nanoparticles, and doped oxide nanoparticles (ZnO:Ag, Gd{sub 2}O{sub 2}:Tb{sup 3+}) formed as a result of single- and double-pulse laser ablation in different liquids (water, ethanol, acetone, solutions of polysaccharides) are discussed. (photonics and nanotechnology)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Platform development for dE/dx measurements on short-pulse laser facilities

We illustrate generating benchmark data on charged-particle stopping power in dense plasma is a challenge, motivating new experimental platforms for facilities such as short-pulse lasers. We report on several experiments that aimed to develop a platform for high-precision stopping power measurements at OMEGA EP, specifically developing target-normal sheath acceleration (TNSA) sources, proton isochoric heating, and radiatively heated foams. Integrated experiments were performed to measure stopping power, but several phenomena have been identified that would need to be mitigated for a stopping-power measurement, including irreproducibility of the TNSA sources, spurious electromagnetic fields around proton-heated targets, and cross-talk between the source and subject targets. This work provides a basis for potential future work towards mitigating these problems and performing stopping-power measurements, and is also valuable data for general understanding of TNSA and proton isochoric heating experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SGR 1806-20 and the gravitational wave detectors EXPLORER and NAUTILUS

The activity of the soft gamma ray repeater SGR 1806-20 is studied in correlation with the EXPLORER and NAUTILUS data, during the year 2004, for gravitational wave (GW) short signal search. Corresponding to the most significant triggers, the bright outburst on October 5th and the giant flare (GF) on December 27th, the associated GW signature is searched. Two methods are employed for processing the data. With the average-modulus algorithm, the presence of short pulses with energy E{sub gw{>=}}1.8x10{sup 49} erg is excluded with 90% probability, under the hypothesis of isotropic emission. This value is comparable to the upper limits obtained by LIGO regarding similar sources. Using the cross-correlation method, we find a discrepancy from the null-hypothesis of the order of 1%. This statistical excess is not sufficient to claim a systematic association between the gravitational and the electromagnetic radiations, because the estimated GW upper limits are yet several orders of magnitude far away from the theoretically predicted levels, at least three for the most powerful SGR flare.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Compac carbon ion LINAC

The invention provides a method for accelerating protons and carbon ions up to 450 MeV/u in a very compact linac, the method comprising subjecting the particles to a radio frequency quadrupole field to accelerate the particles to at least 3 MeV/u, a drift tube linac (DTL) to an energy of 20 MeV/u, followed by a coupled DTL to 45 MeV/u and finally a high-gradient section made of CCL-type standing wave cavities or negative harmonic traveling wave cavities operating at S-band frequencies and capable of delivering voltage gradients of 40 to 60 MV/m. Focusing the accelerated particles while accelerated to higher energy is provided by appropriately placed constant field permanent magnets and electromagnetic quadrupoles. The compactness and power efficiency of the linac is enabled by using high-gradient structure in the S-band frequencies for lower energy particles than ever before. The low-intensity required for hadron therapy allows the use of small-aperture S-band structures and the operation at very high gradient compared to high-intensity machines for research. Operating with very short sub-microsecond pulses at repetition rates up to 400 Hz allows the fast and flexible beam energy and intensity tuning not provided by existing hadron therapy machines. The designed linac is capable of accelerating ions as heavy as neon to the full 450 MeV/u energy, therefore allowing fast beam switching if different ion sources are installed in the front-end of the linac.

43 PARTICLE ACCELERATORS↗

Unexpected formation by pulsed laser deposition of nanostructured Fe/olivine thin films on MgO substrates

Olivine-type LiFePO{sub 4} thin films were grown on MgO (1 0 0) substrates by pulsed laser deposition (PLD). The formation of an original nanostructure is evidenced by transmission electron microscopy measurements. Indeed, on focused ion beam prepared cross sections of the thin film, we observe, the amazing formation of metallic iron/olivine nanostructures. The appearance of such a structure is explained owing to a topotactic relation between the two phases as well as a strong Mg diffusion from the substrate to the film surface. Magnesium migration is thus concomitant with the creation of metallic iron domains that grow from the core of the film to the surface leading to large protuberances. To the best of our knowledge, this is the first report on iron extrusion from the olivine-type LiFePO{sub 4}. -- Graphical Abstract: HRTEM image of olivine/Fe nanostructure obtained by PLD. Display Omitted Research highlights: {yields} This manuscript describes the attempt to prepare textured LiFePO{sub 4} by PLD. This is presently a challenge to better understand the physical properties of the material, used as cathode in lithium ion batteries. {yields} We describe for the first time the iron extrusion from this material. Indeed, there were recent reports on the possible non-stoichiometry, i.e. lithium or oxygen. However, on the iron side, only some defect were observed for hydrothermally prepared material but the extrusion is new in this paper. {yields} We prepared interesting nanostructures which could be used for different fundamental studies: electric and magnetic measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of laser irradiation of nanoparticles in aqueous uranium salt solutions on nuclide activity

This paper presents an experimental study of the effect of laser irradiation of aqueous uranyl chloride solutions containing gold nanoparticles on the activity of the uranium series radionuclides {sup 234}Th, {sup 234m}Pa, and {sup 235}U. The solutions were exposed to femtosecond Ti:sapphire laser pulses and to the second or third harmonic of a Nd:YAG laser (150-ps pulses) at a peak intensity in the medium of {approx}10{sup 12} W cm{sup -2}. The activities of the radionuclides in the irradiated solutions were shown to differ markedly from their equilibrium values. The sign of the deviation depends on the laser wavelength. The measured activity deviations can be interpreted as evidence that laser exposure of nanoparticles accelerates the alpha and beta decays of the radionuclides. The observed effects are accounted for in terms of a mechanism that involves resonant enhancement of optical waves by metallic nanoparticles. (interaction of laser radiation with matter)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Encapsulation Enhances the Quantum Coherence of a Solid‐State Molecular Spin Qubit

Spins within molecules benefit from the atomistic control of synthetic chemistry for the realization of qubits. One advantage is that the quantum superpositions of the spin states encoding the qubit can be coherently manipulated using electromagnetic radiation. The main challenge is the fragility of these superpositions when qubits are to partake of solid-state devices. We address this issue with a supramolecular approach for protecting molecular spin qubits against decoherence. The molecular qubit [Cr(ox)3]3- has been encapsulated inside the diamagnetic triple-stranded helicate [Zn2L3]4+ (L is a bis-pyrazolylpyridine ligand). The quantum coherence of the protected qubit is then analyzed with pulsed EPR spectroscopy and compared with the unprotected qubit, both in solution and in the solid state. Crucially, the spin-spin relaxation in the solid state has been examined within diamagnetic crystal lattices of the isostructural ([Al(ox)3]@[Zn2L3])+ or [Al(ox)3]3- assemblies, respectively, doped with the Cr3+ qubit in two different (<10%) concentrations. The study unveils a surprising increase of the phase memory time of the qubit upon encapsulation only in the solid. Spin-lattice relaxation times also exhibit a significant enhancement, as established from inversion recovery pulse sequences and from slow relaxation of the magnetization of the protected qubit, not featured by the free qubit.

Swain, Abinash↗

Photoconductive and electro-optic effects in (Cd,Mg)Te single crystals measured in an experiment-on-chip configuration

We present our studies on both photoconductive (PC) and electro-optic (EO) responses of (Cd,Mg)Te single crystals. In an In-doped Cd 0.92 Mg 0.08 Te single crystal, subpicosecond electrical pulses were optically generated via a PC effect, coupled into a transmission line, and, subsequently, detected using an internal EO sampling scheme, all in the same (Cd,Mg)Te material. For photo-excitation and EO sampling, we used femtosecond optical pulses generated by the same Ti:sapphire laser with the wavelength 410 and 820 nm, respectively. The shortest transmission line distance between the optical excitation and EO sampling points was 75 μm. By measuring the transient waveforms at different distances from the excitation point, we calculated the transmission-line complex propagation factor, as well as the THz frequency attenuation factor and the propagation velocity, all of which allowed us to reconstruct the electromagnetic transient generated directly at the excitation point, showing that the original PC transient was subpicosecond in duration with a fall time of ~500 fs. Finally, the measured EO retardation, together with the amount of the electric-field penetration, allowed us to determine the magnitude of the internal EO effect in our (Cd,Mg)Te crystal. The obtained THz-frequency EO coefficient was equal to 0.4 pm/V, which is at the lower end among the values reported for CdTe-based ternaries, due to a twinned structure and misalignment of the tested (Cd,Mg)Te crystal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum vacuum processes in the extremely intense light of relativistic plasma mirror sources

Abstract The advent of petawatt-class laser systems allows generating electromagnetic fields of unprecedented strength in a controlled environment, driving increasingly more efforts to probe yet unobserved processes through their interaction with the quantum vacuum. Still, the lowest intensity scale governing these effects lies orders of magnitude beyond foreseen capabilities, so that such endeavor is expected to remain extremely challenging. In recent years, however, plasma mirrors have emerged as a promising bridge across this gap, by enabling the conversion of intense infrared laser pulses into coherently focused Doppler harmonic beams lying in the X-UV range. In this work, we present predictions on the quantum vacuum signatures produced when such beams are focused to intensities between 10 24 and 10 28 W cm −2 , specifically photon–photon scattering and electron–positron pair creation. These signatures are computed via the stimulated vacuum formalism, combined with a model of perfectly focused beam built from PIC-generated harmonics spectra, and implemented on state-of-the-art massively parallel numerical tools. In view of identifying experimentally favorable configurations, we also consider the coupling of the focused harmonic beam with an auxiliary optical beam, and provide comparison with other established schemes. Our results show that a single coherently focused harmonic beam can produce as much scattered photons as two infrared pulses in head-on collision, and confirm that the coupling of the harmonic beam to an auxiliary beam gives rise to significant levels of inelastic scattering, and hence holds the potential to strongly improve the attainable signal to noise ratios in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental superradiance and slow-light effects for quantum memories

The effects of high optical depth phenomena, such as superradiance, are investigated in potential quantum memory materials. The results may have relevance for several schemes, including controlled reversible inhomogeneous broadening, atomic frequency combs, and quantum memories based on electromagnetically induced transparency, which are based on using ensembles as storage media. It is shown that strong superradiant effects manifested as decay rates larger than 1/T{sub 2}* are present even for moderate values of {alpha}L{<=}5 and increases as a function of {alpha}L. For even higher {alpha}L, effects such as off-resonant slow light is demonstrated and discussed and, finally, the efficiency of time-reversed optimized input pulses is tested. A maximum retrieval efficiency of {approx}20% is reached and agreement with the theoretically expected result is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of inhomogeneous bulk plane acoustic modes by laser-induced thermoelastic grating near mechanically free surface

The detailed theoretical description of how picosecond plane shear acoustic transients can be excited by ultrafast lasers in isotropic media is presented. The processes leading to excitation of inhomogeneous plane bulk compression/dilatation (c/d) and shear acoustic modes by transient laser interference pattern at a mechanically free surface of an elastically isotropic medium are analyzed. Both pure modes are dispersive. The modes can be evanescent or propagating. The mechanical displacement vector in both propagating modes is oriented obliquely to the mode propagation direction. Consequently the c/d mode is not purely longitudinal and shear mode is not purely transversal. Each of the propagating modes has a plane wave front parallel to the surface and the amplitude harmonically modulated along the surface. Inhomogeneous shear acoustic mode cannot be generated in isotropic medium by thermal expansion and is excited by mode conversion of laser-generated inhomogeneous c/d acoustic mode incident on the surface. The spectral transformation function of the laser radiation conversion into shear modes has one of its maxima at a frequency corresponding to transmission from laser-induced generation of propagating to laser-induced generation of evanescent c/d modes. At this particular frequency the shear waves are due to their Cherenkov emission by bulk longitudinal acoustic waves skimming along the laser-irradiated surface, which are generated by laser-induced gratings synchronously. There exists an interval of frequencies where only shear acoustic modes are launched in the material by laser-induced grating, while c/d modes generated by thermoelastic optoacoustic conversion are evanescent. Propagating picosecond plane shear acoustic fronts excited by interference pattern of fs-ps laser pulses can be applied for the determination of the shear rigidity by optoacoustic echoes diagnostics of thin films and coatings. Theoretical predictions are correlated with available results of experiments and of numerical modeling.

36 MATERIALS SCIENCE↗