Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Distribution parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

SU-E-T-335: Dosimetric Investigation of An Advanced Rotating Gamma Ray System for Imaged Guided Radiation Therapy

Purpose: Co-60 beams have unique dosimetric properties for cranial treatments and thoracic cancers. The conventional concern about the high surface dose is overcome by modern system designs with rotational treatment techniques. This work investigates a novel rotational Gamma ray system for image-guided, external beam radiotherapy. Methods: The CybeRT system (Cyber Medical Corp., China) consists of a ring gantry with either one or two treatment heads containing a Gamma source and a multileaf collimator (MLC). The MLC has 60 paired leaves, and the maximum field size is either 40cmx40cm (40 pairs of 0.5cm central leaves, 20 pairs of 1cm outer leaves), or 22cmx40cm (32 pairs of 0.25cm central leaves, 28 pairs of 0.5cm outer leaves). The treatment head(s) can swing 35° superiorly and 8° inferiorly, allowing a total of 43° non-coplanar beam incident. The treatment couch provides 6-degrees-of-freedom motion compensation and the kV cone-beam CT system has a spatial resolution of 0.4mm. Monte Carlo simulations were used to compute dose distributions and compare with measurements. A retrospective study of 98 previously treated patients was performed to compare CybeRT with existing RT systems. Results: Monte Carlo results confirmed the CybeRT design parameters including output factors and 3D dose distributions. Its beam penumbra/dose gradient was similar to or better than that of 6MV photon beams and its isocenter accuracy is 0.3mm. Co-60 beams produce lower-energy secondary electrons that exhibit better dose properties in low-density lung tissues. Because of their rapid depth dose falloff, Co-60 beams are favorable for peripheral lung tumors with half-arc arrangements to spare the opposite lung and critical structures. Superior dose distributions were obtained for head and neck, breast, spine and lung tumors. Conclusion: Because of its accurate dose delivery and unique dosimetric properties of C-60 sources, CybeRT is ideally suited for advanced SBRT as well as conventional RT. This work was partially supported by Cyber Medical Corp.

60 APPLIED LIFE SCIENCES↗

Plasma-induced neutrino helicity flip in a supernova core and a constraint on the Dirac neutrino magnetic moment

We investigate the neutrino helicity flip under supernova core conditions, where the left-handed neutrinos being produced can be converted into right-handed neutrinos sterile with respect to weak interactions owing to the interaction of the magnetic moments with plasma electrons and protons. In calculating the probability for the conversion neutrino scattering by plasma components, we take into account the polarization effects attributable to both electrons and protons in the photon propagator. Based on realistic models with radial distributions and time evolution of physical parameters in a supernova core, we have obtained upper limits on the Dirac neutrino magnetic moment averaged over flavors and time from the condition that the influence of the right-handed neutrino emission on the total cooling time scale should be limited.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Supercell Depletion Studies for Prismatic High Temperature Reactors

The traditional two-step method of analysis is not accurate enough to represent the neutronic effects present in the prismatic high temperature reactor concept. The long range coupling of the various regions in high temperature reactors poses a set of challenges that are not seen in either LWRs or fast reactors. Unlike LWRs, which exhibit large, localized effects, the dominant effects in PMRs are, for the most part, distributed over larger regions, but with lower magnitude. The 1-D in-line treatment currently used in pebble bed reactor analysis is not sufficient because of the 2-D nature of the prismatic blocks. Considerable challenges exist in the modeling of blocks in the vicinity of reflectors, which, for current small modular reactor designs with thin annular cores, include the majority of the blocks. Additional challenges involve the treatment of burnable poisons, operational and shutdown control rods. The use of a large domain for cross section preparation provides a better representation of the neutron spectrum, enables the proper modeling of BPs and CRs, allows the calculation of generalized equivalence theory parameters, and generates a relative power distribution that can be used in compact power reconstruction. The purpose of this paper is to quantify the effects of the reflector, burnable poison, and operational control rods on an LEU design and to delineate an analysis approach for the Idaho National Laboratory. This work concludes that the use of supercells should capture these long-range effects in the preparation of cross sections and along with a set of triangular meshes to treat BPs, and CRs a high fidelity neutronics computation is attainable.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

THE STATISTICAL MECHANICS OF PLANET ORBITS

The final “giant-impact” phase of terrestrial planet formation is believed to begin with a large number of planetary “embryos” on nearly circular, coplanar orbits. Mutual gravitational interactions gradually excite their eccentricities until their orbits cross and they collide and merge; through this process the number of surviving bodies declines until the system contains a small number of planets on well-separated, stable orbits. In this paper we explore a simple statistical model for the orbit distribution of planets formed by this process, based on the sheared-sheet approximation and the ansatz that the planets explore uniformly all of the stable region of phase space. The model provides analytic predictions for the distribution of eccentricities and semimajor axis differences, correlations between orbital elements of nearby planets, and the complete N-planet distribution function, in terms of a single parameter, the “dynamical temperature,” that is determined by the planetary masses. The predicted properties are generally consistent with N-body simulations of the giant-impact phase and with the distribution of semimajor axis differences in the Kepler catalog of extrasolar planets. A similar model may apply to the orbits of giant planets if these orbits are determined mainly by dynamical evolution after the planets have formed and the gas disk has disappeared.

79 ASTRONOMY AND ASTROPHYSICS↗

Final Report on MEGAPIE Target Irradiation and Post-Irradiation Examination

Megawatt pilot experiment (MEGAPIE) was successfully performed in 2006. One of the important goals of MEGAPIE is to understand the behaviour of structural materials of the target components exposed to high fluxes of high-energy protons and spallation neutrons in flowing LBE (liquid lead-bismuth eutectic) environment by conducting post-irradiation examination (PIE). The PIE includes four major parts: non-destructive test, radiochemical analysis of production and distribution of radionuclides produced by spallation reaction in LBE, analysis of LBE corrosion effects on structural materials, T91 and SS 316L steels, and mechanical testing of the T91 and SS 316L steels irradiated in the lower part of the target. The non-destructive test (NDT) including visual inspection and ultrasonic measurement was performed in the proton beam window area of the T91 calotte of the LBE container, the most intensively irradiated part of the MEGAPIE target. The visual inspection showed no visible failure and the ultrasonic measurement demonstrated no detectable change in thickness in the beam window area. Gamma mapping was also performed in the proton beam window area of the AlMg 3 safety-container. The gamma mapping results were used to evaluate the accumulated proton fluence distribution profile, the input data for determining irradiation parameters. Radiochemical analysis of radionuclides produced by spallation reaction in LBE is to improve the understanding of the production and distribution of radionuclides in the target. The results demonstrate that the radionuclides of noble metals, 207 Bi, 194 Hg/Au are rather homogeneously distributed within the target, while radionuclides of electropositive elements are found to be deposited on the steel-LBE interface. The corrosion effect of LBE on the structural components under intensive irradiation was investigated by metallography. The results show that no evident corrosion damages. However, unexpected deep cracks were found in the EBW (electron beam weld) of the LBE container in the intensive irradiation zone of the target, which should be formed during irradiation. In the SS 316L steel of the flow guide tube, inclusions or precipitates enriched with O, Si, S, Ca, Ti and Mn were observed. Many of them are very long, up to a few mm, and located on grain boundaries along the extrusion direction of the tube. The degradation of the mechanical properties of the T91 and SS 316L steels has been investigated by conducting tensile tests on the specimens extracted from the T91 and SS 316L components in the intensive irradiation region. The results obtained from the proton beam window of the T91 calotte exhibit a good ductility of T91 steel after irradiation at 6-7 dpa (displacement per atom) in contact with flowing LBE.

36 MATERIALS SCIENCE↗

A SHORT-PERIOD CENSOR OF SUB-JUPITER MASS EXOPLANETS WITH LOW DENSITY

Despite the existence of many short-period hot Jupiters, there is not one hot Neptune with an orbital period less than 2.5 days. Here, we discuss a cluster analysis of the currently known 106 transiting exoplanets to investigate a possible explanation for this observation. We find two distinct clusters in the mass-density space, one with hot Jupiters with a wide range of orbital periods (0.8-114 days) and a narrow range of planet radii (1.2 {+-} 0.2 R{sub J} ) and another one with a mixture of super-Earths, hot Neptunes, and hot Jupiters, exhibiting a surprisingly narrow period distribution (3.7 {+-} 0.8 days). These two clusters follow strikingly different distributions in the period-radius parameter plane. The branch of sub-Jupiter mass exoplanets is censored by the orbital period at the large-radius end: no planets with mass between 0.02 and 0.8 M{sub J} or with radius between 0.25 and 1.0 R{sub J} are known with P{sub orb} < 2.5 days. This clustering is not predicted by current theories of planet formation and evolution, which we also review briefly.

79 ASTRONOMY AND ASTROPHYSICS↗

On parameterization of the inverse problem for estimating aquifer properties using tracer data

We consider a field-scale tracer experiment conducted in 2007 in a shallow uranium-contaminated aquifer at Rifle, Colorado. In developing a reliable approach for inferring hydrological properties at the site through inverse modeling of the tracer data, decisions made on how to parameterize heterogeneity (i.e., how to represent a heterogeneous distribution using a limited number of parameters that are amenable to estimation) are of paramount importance. We present an approach for hydrological inversion of the tracer data and explore, using a 2D synthetic example at first, how parameterization affects the solution, and how additional characterization data could be incorporated to reduce uncertainty. Specifically, we examine sensitivity of the results to the configuration of pilot points used in a geostatistical parameterization, and to the sampling frequency and measurement error of the concentration data. A reliable solution of the inverse problem is found when the pilot point configuration is carefully implemented. In addition, we examine the use of a zonation parameterization, in which the geometry of the geological facies is known (e.g., from geophysical data or core data), to reduce the non-uniqueness of the solution and the number of unknown parameters to be estimated. When zonation information is only available for a limited region, special treatment in the remainder of the model is necessary, such as using a geostatistical parameterization. Finally, inversion of the actual field data is performed using 2D and 3D models, and results are compared with slug test data.

54 ENVIRONMENTAL SCIENCES↗

Hierarchical Modeling and Statistical Calibration for Photometric Redshifts

The cosmological exploitation of modern photometric galaxy surveys requires both accurate (unbiased) and precise (narrow) redshift probability distributions derived from broadband photometry. Existing methodologies do not meet these requirements. Standard template fitting delivers interpretable models and errors, but lacks the flexibility to learn inaccuracies in the observed photometry or spectral templates. Machine learning addresses those issues, but requires representative training data, and the resulting models and uncertainties cannot be interpreted in the context of a physical model or outside of the training data. We present a hierarchical modeling approach simultaneously addressing the issues of flexibility, interpretability, and generalization. It combines template fitting with flexible (machine-learning-like) models to correct the spectral templates, model their redshift distributions, and recalibrate the photometric observations. By optimizing the full posterior distribution of the model and solving for its (thousands of) parameters, one can perform a global statistical calibration of the data and the spectral energy distribution (SED) model. We apply this approach to the public Dark Energy Survey Science Verification data and show that it provides more accurate and compact redshift posterior distributions than existing methods, as well as insights into residual photometric and SED systematics. Here, the model is causal and makes predictions for future data (e.g., additional photometric bandpasses), and its internal parameters and components are interpretable. This approach does not formally require the training data to be complete or representative; in principle, it can even work in regimes in which few or no spectroscopic redshifts are available.

79 ASTRONOMY AND ASTROPHYSICS↗

Technology and Climate Trends in PV Module Degradation: Preprint

To sustain the commercial success of photovoltaic (PV) technology it is vital to know how power output decreases with time. Unfortunately, it can take years to accurately measure the long-term degradation of new products, but past experience on older products can provide a basis for prediction of degradation rates of new products. An extensive search resulted in more than 2000 reported degradation rates with more than 1100 reported rates that include some or all IV parameters. In this paper we discuss how the details of the degradation data give clues about the degradation mechanisms and how they depend on technology and climate zones as well as how they affect current and voltage differently. The largest contributor to maximum power decline for crystalline Si technologies is short circuit current (or maximum current) degradation and to a lesser degree loss in fill factor. Thin-film technologies are characterized by a much higher contribution from fill factor particularly for humid climates. Crystalline Si technologies in hot & humid climates also display a higher probability to show a mixture of losses (not just short circuit current losses) compared to other climates. The distribution for the module I-V parameters (electrical mismatch) was found to change with field exposure. The distributions not only widened but also developed a tail at the lower end, skewing the distribution.

14 SOLAR ENERGY↗

Technology and Climate Trends in PV Module Degradation (Presentation)

To sustain the commercial success of photovoltaic (PV) technology it is vital to know how power output decreases with time. Unfortunately, it can take years to accurately measure the long-term degradation of new products, but past experience on older products can provide a basis for prediction of degradation rates of new products. An extensive search resulted in more than 2000 reported degradation rates with more than 1100 reported rates that include some or all IV parameters. In this presentation we discuss how the details of the degradation data give clues about the degradation mechanisms and how they depend on technology and climate zones as well as how they affect current and voltage differently. The largest contributor to maximum power decline for crystalline Si technologies is short circuit current (or maximum current) degradation and to a lesser degree loss in fill factor. Thin-film technologies are characterized by a much higher contribution from fill factor particularly for humid climates. Crystalline Si technologies in hot & humid climates also display a higher probability to show a mixture of losses (not just short circuit current losses) compared to other climates. The distribution for the module I-V parameters (electrical mismatch) was found to change with field exposure. The distributions not only widened but also developed a tail at the lower end, skewing the distribution.

14 SOLAR ENERGY↗

Effect of stochasticity in mean field dynamo models

We present a comprehensive investigation into the effect of choosing the stochastic control parameters in a simplified-Parker dynamo model. Through considering the manifold of marginal stability, i.e., the region of parameter space where the mean growth rate is zero, we show that stochastic fluctuations are not prohibitive to dynamo. Furthermore, by directly comparing results obtained by periodic and Gaussian coloured noise alpha with identical characteristic time-scales and fluctuating amplitudes, we find that the transition to dynamo is significantly eased for stochastically fluctuating alpha. The effect of stochasticity in magnetic diffusion is also investigated, highlighting the importance of resonance between poloidal and toroidal magnetic fields on the growth rate. Furthermore, we show that probability density functions of the growth-rate, magnetic field, and magnetic energy can provide a wealth of useful information regarding the dynamo behaviour/intermittency. Finally, the statistical properties of the dynamo such as temporal correlation and fluctuating amplitude are found to be dependent on the distribution of the fluctuations in stocastic parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pauli–Villars regularization elucidated in Bopp–Podolsky’s generalized electrodynamics

We discuss an inherent Pauli–Villars regularization in Bopp–Podolsky’s generalized electrodynamics. Introducing gauge-fixing terms for Bopp–Podolsky’s generalized electrodynamic action, we realize a unique feature for the corresponding photon propagator with a built-in Pauli–Villars regularization independent of the gauge choice made in Maxwell’s usual electromagnetism. According to our realization, the length dimensional parameter a associated with Bopp–Podolsky’s higher order derivatives corresponds to the inverse of the Pauli–Villars regularization mass scale Λ, i.e. a=1/Λ. Solving explicitly the classical static Bopp–Podolsky’s equations of motion for a specific charge distribution, we explore the physical meaning of the parameter a in terms of the size of the charge distribution. As an offspring of the generalized photon propagator analysis, we also discuss our findings regarding on the issue of the two-term vs. three-term photon propagator in light-front dynamics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

BEYONDPLANCK XIII. Intensity foreground sampling, degeneracies, and priors

We present the intensity foreground algorithms and model employed within the BEYONDPLANCK analysis framework. The BEYONDPLANCK analysis is aimed at integrating component separation and instrumental parameter sampling within a global framework, leading to complete end-to-end error propagation in the Planck Low Frequency Instrument (LFI) data analysis. Given the scope of the BEYONDPLANCK analysis, a limited set of data is included in the component separation process, leading to foreground parameter degeneracies. In order to properly constrain the Galactic foreground parameters, we improve upon the previous Commander component separation implementation by adding a suite of algorithmic techniques. These algorithms are designed to improve the stability and computational efficiency for weakly constrained posterior distributions. These are: (1) joint foreground spectral parameter and amplitude sampling, building on ideas from MIRAMARE; (2) component-based monopole determination; (3) joint spectral parameter and monopole sampling; and (4) application of informative spatial priors for component amplitude maps. We find that the only spectral parameter with a significant signal-to-noise ratio using the current BEYONDPLANCK data set is the peak frequency of the anomalous microwave emission component, for which we find $ν$ p = 25.3 ± 0.5 GHz; all others must be constrained through external priors. Future works will be aimed at integrating many more data sets into this analysis, both map and time-ordered based, thereby gradually eliminating the currently observed degeneracies in a controlled manner with respect to both instrumental systematic effects and astrophysical degeneracies. When this happens, the simple LFI-oriented data model employed in the current work will need to be generalized to account for both a richer astrophysical model and additional instrumental effects. This work will be organized within the Open Science-based COSMOGLOBE community effort.

79 ASTRONOMY AND ASTROPHYSICS↗

Molecular dynamic simulations of electric microfield distributions in a nonideal electron-positron plasma

A symmetric model of a two-component plasma is considered and the distributions of electric microfields acting on charged and neutral particles are calculated using the method of molecular dynamics at a fixed temperature of T = 30000 K and different values of the coupling parameter 0.2 {<=} {Gamma} {<=} 1.2. Changes in these distributions with varying {Gamma} are discussed. Special attention is paid to the behavior of the distribution tails. The behavior of these tails at a neutral point is shown to agree with the tails of the Holtsmark distribution, whereas the tails of the distribution at a charge are considerably heavier and are characterized by the exponent that varies within the range from -2.2 up to -1.8 as {Gamma} increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Search for anomalous couplings in the W tb vertex from the measurement of double differential angular decay rates of single top quarks produced in the t-channel with the ATLAS detector

The electroweak production and subsequent decay of single top quarks is determined by the properties of the Wtb vertex. This vertex can be described by the complex parameters of an effective Lagrangian. An analysis of angular distributions of the decay products of single top quarks produced in the t -channel constrains these parameters simultaneously. The analysis described in this paper uses 4.6 fb -1 of proton-proton collision data at √s=7 TeV collected with the ATLAS detector at the LHC. Two parameters are measured simultaneously in this analysis. The fraction f 1 of decays containing transversely polarised W bosons is measured to be 0.37 ± 0.07 (stat.⊕syst.). The phase δ - between amplitudes for transversely and longitudinally polarised W bosons recoiling against left-handed b-quarks is measured to be -0.014π ± 0.036π (stat.⊕syst.). The correlation in the measurement of these parameters is 0.15. These values result in two-dimensional limits at the 95% confidence level on the ratio of the complex coupling parameters g R and V L , yielding Re[g R /V L ] ϵ [-0.36, 0.10] and Im[g R /V L ] ϵ [-0.17, 0.23] with a correlation of 0.11. We find the results are in good agreement with the predictions of the Standard Model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

INVARIANT KAPPA DISTRIBUTION IN SPACE PLASMAS OUT OF EQUILIBRIUM

Recent advances in Space Physics theory have shown the connection between non-extensive Statistical Mechanics and space plasmas by providing a theoretical basis for the empirically derived kappa distributions commonly used to describe the phase-space distribution functions of these systems. The non-equilibrium temperature and the kappa index that govern these distributions are the two independent controlling parameters of non-equilibrium systems. The significance of the kappa index is primarily given by its role in identifying the non-equilibrium stationary states and measuring their 'thermodynamic distance' from thermal equilibrium, while its physical meaning is connected to the correlation between the system's particles. The classical, single stationary state at equilibrium is generalized into a whole set of different non-equilibrium stationary states labeled by the kappa index. This paper addresses certain crucial issues about the physical meaning and role of the kappa index in identifying stationary states. The origin of the emerged inconsistencies is that the kappa index is not an invariant physical quantity, but instead depends on the degrees of freedom of the system's particles. This leads in several misleading conclusions, such as (1) only large kappa index, practically infinite, can characterize the many-particle kappa distribution, and (2) the correlation between particles depends on the total number of the system's particles. Here we show that a modified kappa index, invariant for any number of degrees of freedom, can be naturally defined. Then, we develop and examine the relevant corrected formulation of many-particle multidimensional kappa distribution, and discuss the physical meaning of the invariant kappa index.

79 ASTRONOMY AND ASTROPHYSICS↗

Microscopic theory of relaxation processes in systems of particles interacting with the hydrodynamic medium

Our work considers spatially nonuniform states of particles, weakly interacting with a hydrodynamic medium. We developed a microscopic theory, describing such systems involving Bogolubov's reduced description method. It was shown that such systems have both kinetic and hydrodynamic stages of evolution. At the kinetic stage of evolution the one-particle distribution function is a reduced description parameter for particles, and, therefore, a medium is described by five hydrodynamic parameters (density, temperature, and velocity). The coupled system of equations of motion describing the system on the kinetic stage of evolution was obtained on the basis of Bogolubov's reduced description method. The transition from the kinetic to hydrodynamic stage of evolution for particles interacting with the medium was also studied within the reduced description method. It was shown that on the hydrodynamic stage the only description parameter of particles is their density, although the medium is still described by five hydrodynamic variables. Consequently, a coupled system of equations, which completely describe the evolution of the system under consideration on the hydrodynamic stage, including dissipation processes, was obtained. These equations were used to study the propagation of acoustic waves in our system. Also the influence of particles on relaxation processes was discussed. The obtained equations, for example, may be used to describe the neutrons propagating in a hydrodynamic medium without multiplication and capture.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Oxygen distribution in tumors: A qualitative analysis and modeling study providing a novel Monte Carlo approach

Purpose: To construct a Monte Carlo (MC)-based simulation model for analyzing the dependence of tumor oxygen distribution on different variables related to tumor vasculature [blood velocity, vessel-to-vessel proximity (vessel proximity), and inflowing oxygen partial pressure (pO{sub 2})]. Methods: A voxel-based tissue model containing parallel capillaries with square cross-sections (sides of 10 μm) was constructed. Green's function was used for diffusion calculations and Michaelis-Menten's kinetics to manage oxygen consumption. The model was tuned to approximately reproduce the oxygenational status of a renal carcinoma; the depth oxygenation curves (DOC) were fitted with an analytical expression to facilitate rapid MC simulations of tumor oxygen distribution. DOCs were simulated with three variables at three settings each (blood velocity, vessel proximity, and inflowing pO{sub 2}), which resulted in 27 combinations of conditions. To create a model that simulated variable oxygen distributions, the oxygen tension at a specific point was randomly sampled with trilinear interpolation in the dataset from the first simulation. Six correlations between blood velocity, vessel proximity, and inflowing pO{sub 2} were hypothesized. Variable models with correlated parameters were compared to each other and to a nonvariable, DOC-based model to evaluate the differences in simulated oxygen distributions and tumor radiosensitivities for different tumor sizes. Results: For tumors with radii ranging from 5 to 30 mm, the nonvariable DOC model tended to generate normal or log-normal oxygen distributions, with a cut-off at zero. The pO{sub 2} distributions simulated with the six-variable DOC models were quite different from the distributions generated with the nonvariable DOC model; in the former case the variable models simulated oxygen distributions that were more similar to in vivo results found in the literature. For larger tumors, the oxygen distributions became truncated in the lower end, due to anoxia, but smaller tumors showed undisturbed oxygen distributions. The six different models with correlated parameters generated three classes of oxygen distributions. The first was a hypothetical, negative covariance between vessel proximity and pO{sub 2} (VPO-C scenario); the second was a hypothetical positive covariance between vessel proximity and pO{sub 2} (VPO+C scenario); and the third was the hypothesis of no correlation between vessel proximity and pO{sub 2} (UP scenario). The VPO-C scenario produced a distinctly different oxygen distribution than the two other scenarios. The shape of the VPO-C scenario was similar to that of the nonvariable DOC model, and the larger the tumor, the greater the similarity between the two models. For all simulations, the mean oxygen tension decreased and the hypoxic fraction increased with tumor size. The absorbed dose required for definitive tumor control was highest for the VPO+C scenario, followed by the UP and VPO-C scenarios. Conclusions: A novel MC algorithm was presented which simulated oxygen distributions and radiation response for various biological parameter values. The analysis showed that the VPO-C scenario generated a clearly different oxygen distribution from the VPO+C scenario; the former exhibited a lower hypoxic fraction and higher radiosensitivity. In future studies, this modeling approach might be valuable for qualitative analyses of factors that affect oxygen distribution as well as analyses of specific experimental and clinical situations.

60 APPLIED LIFE SCIENCES↗