Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dislocation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Improvement of electron mobility in La:BaSnO{sub 3} thin films by insertion of an atomically flat insulating (Sr,Ba)SnO{sub 3} buffer layer

One perovskite oxide, ASnO{sub 3} (A = Sr, Ba), is a candidate for use as a transparent conductive oxide with high electron mobility in single crystalline form. However, the electron mobility of films grown on SrTiO{sub 3} substrates does not reach the bulk value, probably because of dislocation scattering that originates from the large lattice mismatch. This study investigates the effect of insertion of bilayer BaSnO{sub 3} / (Sr,Ba)SnO{sub 3} for buffering this large lattice mismatch between La:BaSnO{sub 3} and SrTiO{sub 3} substrate. The insertion of 200-nm-thick BaSnO{sub 3} on (Sr,Ba)SnO{sub 3} bilayer buffer structures reduces the number of dislocations and improves surface smoothness of the films after annealing as proved respectively by scanning transmission electron microscopy and atomic force microscopy. A systematic investigation of BaSnO{sub 3} buffer layer thickness dependence on Hall mobility of the electron transport in La:BaSnO{sub 3} shows that the highest obtained value of mobility is 78 cm{sup 2}V{sup −1}s{sup −1} because of its fewer dislocations. High electron mobility films based on perovskite BaSnO{sub 3} can provide a good platform for transparent-conducting-oxide electronic devices and for creation of fascinating perovskite heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving optical performance of GaN nanowires grown by selective area growth homoepitaxy: Influence of substrate and nanowire dimensions

Series of GaN nanowires (NW) with controlled diameters (160–500 nm) and heights (420–1100 nm) were homoepitaxially grown on three different templates: GaN/Si(111), GaN/AlN/Si(111), and GaN/sapphire(0001). Transmission electron microscopy reveals a strong influence of the NW diameter on dislocation filtering effect, whereas photoluminescence measurements further relate this effect to the GaN NWs near-bandgap emission efficiency. Although the templates' quality has some effects on the GaN NWs optical and structural properties, the NW diameter reduction drives the dislocation filtering effect to the point where a poor GaN template quality becomes negligible. Thus, by a proper optimization of the homoepitaxial GaN NWs growth, the propagation of dislocations into the NWs can be greatly prevented, leading to an exceptional crystal quality and a total dominance of the near-bandgap emission over sub-bandgap, defect-related lines, such as basal stacking faults and so called unknown exciton (UX) emission. In addition, a correlation between the presence of polarity inversion domain boundaries and the UX emission lines around 3.45 eV is established.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unlimited damage accumulation in metallic materials under cascade-damage conditions

Most experiments on neutron or heavy-ion cascade-produced irradiation of pure metals and metallic alloys demonstrate continuous unlimited void growth as well as development of the dislocation structure. In contrast, the theory of radiation damage predicts saturation of void swelling at sufficiently high irradiation doses and according termination of accumulation of interstitial-type defects. It is shown in the present paper that, in the conditions of steady production of one-dimensionally (1-D) mobile clusters of self-interstitial atoms (SIAs) in displacement cascades, three reasons can be behind these observations. First, if the fraction of SIAs generated in the clustered form is smaller than some finite value of the order of the dislocation bias factor. Second, if solute, impurity or transmuted atoms segregate to voids and repel the SIA clusters. Third, if spatial correlations between voids and other defects, such as second-phase precipitates and dislocations, establish that provide shadowing of voids from the SIA clusters. The driving force for the development of such correlations is the same as for the void lattice formation and is argued to be always present under cascade-damage conditions. It is emphasized that the mean-free path of 1-D migrating SIA clusters is typically at least an order of magnitude longer than the average distance between microstructural defects; hence spatial correlations on the same scale should be taken into consideration. A way of developing a predictive theory is discussed. An interpretation of the universal steady-state swelling rate of ~1%/dpa observed in austenitic steels is proposed for the first time.

36 MATERIALS SCIENCE↗

Scanning Transmission Electron Microscopy–Atom Probe Tomography Correlative Analysis for the Characterization of Solute-defect Interactions

Atom probe tomography (APT) and (scanning) transmission electron microscopy ((S)TEM) are complementary techniques that provide spatially resolved chemical and structural information at the atomic scale. Here, in this study, we employ two different STEM/APT correlative analysis methods to investigate Cr segregation at dislocation loops in ultra-high purity Fe–Cr alloys. APT needles for the correlative analysis were extracted either from bulk material or from thinned TEM lamellae. STEM analysis was used to determine the Burgers vectors of ion-irradiation-induced dislocation loops, while APT reconstruction of the same region revealed the Cr segregation to these loops. We extended the g•b = 0 invisibility criterion of dislocation loops from TEM mode in a lamella to STEM mode in a needle-shaped specimen. STEM and APT analysis on the same needle provide straightforward correlative analysis, although it is limited by a small observation volume. In contrast, iterative STEM analysis of TEM lamellae, followed by the selective extraction of specific regions of interest for APT analysis, expands the observation area by up to 100 times but requires additional time-consuming steps for APT needle extraction from the lamellae.

47 OTHER INSTRUMENTATION↗

At Extreme Strain Rates, Pure Metals Thermally Harden while Alloys Thermally Soften

When materials are deformed at extreme strain rates, >10 6 s -1 , a counterintuitive mechanical response is seen where the strength and hardness of pure metals increases with increasing temperature. This anti-thermal hardening is due to dislocations meeting resistance to their motion from phonons in the crystal lattice. However, here, using optically-driven microballistic impact testing to measure dynamic strength and hardness, we show that when the composition is systematically varied away from high purity, the mechanical response of metals transitions from phonon drag of dislocations back to thermally activated pinning of dislocations, even at the highest strain rates. This boundary from “hotter-is-stronger” to “hotter-is-softer” is observed and mapped for nickel, titanium and gold. Furthermore, the ability to tune between deformation mechanisms with very different temperature dependencies speaks to new directions for alloy design in extreme conditions.

Ballistic transport↗

Inhomogeneous time-reversal symmetry breaking in Sr 2 RuO 4

We show that the observed time-reversal symmetry breaking (TRSB) of the superconducting state in Sr 2 RuO 4 can be understood as originating from inhomogeneous strain fields near edge dislocations of the crystal. Specifically, we argue that, without strain inhomogeneities, Sr 2 RuO 4 is a single-component, time-reversal symmetric superconductor, likely with d x 2 -y 2 symmetry. However, due to the strong strain inhomogeneities generated by dislocations, a slowly decaying subleading pairing state contributes to the condensate in significant portions of the sample. As it phase winds around the dislocation, time-reversal symmetry is locally broken. Global phase locking and TRSB occur at a sharp Ising transition that is not accompanied by a change of the single-particle gap and yields a very small heat capacity anomaly. Our model thus explains the puzzling absence of a measurable heat capacity anomaly at the TRSB transition in strained samples and the dilute nature of the time-reversal symmetry broken state probed by muon spin rotation experiments. We propose that plastic deformations of the material may be used to manipulate the onset of broken time-reversal symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling the plastic relaxation onset in realistic SiGe islands on Si(001)

A detailed investigation of plastic relaxation onset in heteroepitaxial SiGe islands on Si(001) is presented. The strain field induced by a straight misfit-dislocation segment is modeled by finite-element-method (FEM) calculations in three dimensions, fully taking into account the interaction with the multifaceted free surfaces of realistic islands. The total elastic energies before and after the placement of a 60 deg. dislocation segment in the most favorable position are therefore evaluated by a full FEM approach, for different island sizes and compositions. The critical volumes with composition for inserting the dislocation are finally obtained and successfully compared with the data in a report by Marzegalli et al. [Phys. Rev. Lett. 99, 235505 (2007)], where experimental values are compared to a simpler approach.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synergetic effects of dual-beam implantation on the microstructural development in silicon

We report a synergy effect on the microstructural development of silicon specimens as a result of dual-beam high temperature irradiation/implantation. In situ transmission electron microscopy experiments using two different experimental setups have been used, where the primary 50 keV Co{sup +} ion implantation beam was supplemented with either a 300 keV electron beam or a 500 keV Si{sup +} ion beam. In both cases, the secondary beam intensity was such that both beams created comparable overall primary damage. Completely different microstructural response has been found in these two cases. An intensive electron irradiation was found to sharply accelerate the evolution of dislocation structure, only weakly affecting the disilicide kinetics. On the contrary, the Si ion beam weakly affected the kinetics of either dislocation loops or coherent CoSi{sub 2} precipitates, but drastically increased the number density of thermodynamically unstable semicoherent precipitates. Possible microstructural reasons for the observed effects and the implications for both dislocation loop and cobalt disilicide nucleation mechanisms in high-temperature implanted TEM samples are discussed and supported by detailed molecular dynamics calculations of annealing of cascade remnants produced by the energetic silicon recoils.

36 MATERIALS SCIENCE↗

Solutes that reduce yield strength anisotropies in magnesium from first principles

Using Labusch-type solid solution strengthening models parameterized with DFT-computed solute-dislocation interaction energies, we perform a computational search for 63 solutes across the periodic table to find those that lower anisotropy ratios (non-basal to basal CRSS) of magnesium potentially increasing its ductility per the von Mises criterion. For this purpose, we compute changes in strength for solutes as a function of composition and temperature, and compute anisotropy ratios for solutes that include both rare earth and non-rare earth elements. Here we specifically focus on solute-dislocation interaction energies in the following DFT-optimized dislocations as representative of three non-basal plastic deformation modes: $\langle c + a \rangle$ edge, (10$\bar1$2) tension twinning edge, and the (10$\bar{1}$1) compression twinning edge. We find that solute-induced changes in non-basal deformation modes can be approximated using a second-order polynomial in the size misfit of the solutes, which permits rapid screening of solutes. Our approach to identify solutes known to improve strengthening incorporates solute solubility, and suggests other solutes that not have been previously explored for strengthening. The 8 rare-earth solutes that our method suggests as the best, ordered by increasing anisotropy ratios at their optimal concentrations, are: Gd, Tb, Dy, Nd, Ho, Er, Tm, and Yb. The 12 non-rare-earth solutes that our method suggests as the best, ordered by increasing anisotropy ratios, are: Y, Mn, Sc, Pb, Ca, Ag, Bi, Tl, Zn, Li, Ga, and Al. Of these, Gd, Nd, Er, Yb, Y, Mn, Ca, Zn, Li, and Al are used in commercial Mg alloys.

36 MATERIALS SCIENCE↗

Microstructure-Property Relationships in Epitaxial Cu(In, Ga)Se2 Solar-Cell Absorbers

Epitaxially grown Cu(In,Ga)Se 2 (CIGS) absorber layers were analyzed by various techniques in scanning electron microscopy in order to reveal microstructure-property relationships in these thin films. Owing to their epitaxial nature, these CIGS absorber layers do not contain any grain boundaries, but only anti-phase domains (APDs) and dislocations. By combining electron channeling-contrast imaging, electron backscatter diffraction, and cathodoluminescence (CL), in some cases on identical specimen positions of polished cross-sections of CIGS/Mo/glass stacks, it was possible to correlate the presence and orientations of APDs and dislocations with the lateral distributions of the CL intensity and emission-peak energy. We studied CIGS layers with three different [Ga]/([Ga]+[In]) ratios as well as with and without NaF/KF treatments. Considerable differences between the CIGS layer properties in the microstructure-property relationships were found, depending on the growth parameters. Dislocations in the epitaxial CIGS layers do not tend to exhibit strong CL intensity decreases, which contrasts with the situation in numerous other semiconductor materials.

anti-phase domains↗

Defects in nonpolar (134{sup ¯}0) ZnO epitaxial film grown on (114) LaAlO{sub 3} substrate

The defects in (134{sup ¯}0)ZnO epitaxial film grown on (114)LaAlO{sub 3} (LAO) have been systematically investigated by using transmission electron microscopy. At the ZnO/LAO interface, the Burgers vectors of misfit dislocations are identified to be 1/3[1{sup ¯}21{sup ¯}0] and 1/2[0001]. Threading dislocations with the Burgers vectors of 1/3〈112{sup ¯}0〉 and 〈0001〉 are distributed on the basal plane. In (134{sup ¯}0)ZnO film, the predominant planar defects are basal stacking faults (BSFs) with 1/6〈202{sup ¯}3〉 displacement vectors. The densities of dislocations and BSFs are about 3.8 × 10{sup 10} cm{sup −2} and 3.1 × 10{sup 5} cm{sup −1}, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

'Magic numbers' in the melting of a cluster of point charges on a sphere

The thermodynamic properties of a cluster of point Coulomb charges on a sphere have been analyzed using the Monte Carlo method for the number of charges 20 {<=} N {<=} 90. The ground state of the system of charges is described in the model of a closed quasi-two-dimensional triangular lattice with topological defects. We have determined the dependence of the Lindeman parameter {delta}{sub L} of this system on N and on the dimensionless parameter, which is proportional to the temperature T and to the radius R of the cluster, where element is the dielectric constant of the medium and the charge of a particle. The 'magic numbers,' i.e., the N values, for which the melting point of the closed triangular lattice of charges is much higher than those for neighboring N values, have been found. The evolution of the lattice-melting mechanisms with an increase in the number of charges N in a mesoscopic cluster has been analyzed. For N {<=} 32, the melting of the lattice does not involve dislocations (nontopological melting); this behavior of the mesoscopic system of charges on the sphere differs from the behavior of the extended planar two-dimensional system. At N {>=} 50, melting is accompanied by the formation of dislocations. The mechanism of dislocation-free non-topological melting of a closed lattice, which occurs at small N values and is associated with the cooperative rotational motion of 'rings' of particles, has been analyzed. The model has various implementations in the mesoscopic region; in particular, it describes the system of electrons over the liquid-helium cluster, the liquid-helium cluster with incorporated charged particles, a multielectron bubble in liquid helium, a charged quantum dot, etc.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoplasticity and diffusion in silicon single crystals

The effect of static magnetic fields on the dynamics of surface dislocation segments, as well as the diffusion mobility of a dopant in silicon single crystals, has been analyzed. It has been experimentally found that the preliminary treatment of p-type silicon plates (the dopant is boron with a concentration of 10{sup 16} cm{sup -3}) in the static magnetic field (B = 1 T, a treatment time of 30 min) leads to an increase in the mobility of surface dislocation segments. The characteristic times of observed changes (about 80 h) and the threshold dopant concentration (10{sub 15} cm{sup -3}) below which the magneto-optical effect in silicon is not fixed have been determined. It has been found that diffusion processes in dislocation-free silicon are magnetically sensitive: the phosphorus diffusion depth in p-type silicon that is preliminarily aged in the static magnetic field increases (by approximately 20%) compared to the reference samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of AlGaN buffers and channel thickness in the electronic transport properties of Al{sub x}In{sub 1–x}N/AlN/GaN heterostructures

We try to theoretically analyze the reported experimental data of the Al{sub x}In{sub 1–x}N/AlN/GaN heterostructures grown by MOCVD and quantitatively investigate the effects of AlGaN buffers and the GaNchannel thickness on the electrical transport properties of these systems. Also, we obtain the most important effective parameters of the temperature-dependent mobility in the range 35–300 K. Our results show that inserting a 1.1 μm thick Al{sub 0.04}Ga{sub 0.96}N buffer enhances electron mobility by decreasing the effect of phonons, the interface roughness, and dislocation and crystal defect scattering mechanisms. Also, as the channel thickness increases from 20 nm to 40 nm, the electron mobility increases from 2200 to 2540 cm{sup 2}/(V s) and from 870 to 1000 cm{sup 2}/(V s) at 35 and 300 K respectively, which is attributed to the reduction in the dislocation density and the strain-induced field. Finally, the reported experimental data show that inserting a 450 nm graded AlGaN layer before an Al{sub 0.04}Ga{sub 0.96}N buffer causes a decrease in the electron mobility, which is attributed to the enhancement of the lateral size of roughness, the dislocation density, and the strain-induced field in this sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flow of the current along metallic shunts in ohmic contacts to wide-gap III-V semiconductors

It is established experimentally that the contact metal-wide-gap semiconductor (GaAs, GaP, GaN) with the Schottky barrier transforms into the ohmic contact either in the process of continuous heating or in the process of holding at an elevated temperature before the formation of any recrystallized layers. In this case, resistance of the contact reduced to the unit area increases as the temperature increases for semiconductors with a high dislocation density (GaP, GaN). It is assumed that in such contacts, the current flows along the metallic shunts, which shorten the layer of space charge and are formed by metal atoms diffused along the dislocation lines or other imperfections of the semiconductor. In semiconductors with a low dislocation density (GaAs), resistance of the ohmic contact per unit area decreases with increasing the temperature as it was expected for the thermionic mechanism of current flowing.

36 MATERIALS SCIENCE↗

Photoluminescence in silicon implanted with erbium ions at an elevated temperature

Photoluminescence spectra of n-type silicon upon implantation with erbium ions at 600 Degree-Sign C and oxygen ions at room temperature and subsequent annealings at 1100 Degree-Sign C in a chlorine-containing atmosphere have been studied. Depending on the annealing duration, photoluminescence spectra at 80 K are dominated by lines of the Er{sup 3+} ion or dislocation-related luminescence. The short-wavelength shift of the dislocation-related luminescence line observed at this temperature is due to implantation of erbium ions at an elevated temperature. At room temperature, lines of erbium and dislocation-related luminescence are observed in the spectra, but lines of near-band-edge luminescence predominate.

36 MATERIALS SCIENCE↗

Two Stages of Impact Fracture of Polycrystalline ZnS and ZnSe Compounds

Mechanoluminescence (ML) in ductile solids is caused by the motion of charged dislocations in the deformable material. Interatomic bond ruptures followed by electronic structure reconfiguration are the main source of ML in brittle bodies. We studied ML in ceramics composed of mixed ionic/covalent ZnS and ZnSe compounds, which are generated during impact loading higher than the limit deformation. Depending on synthesis method and thermal treatment, the resulting ceramics had different size and geometry of grains and intergrain boundary structure, which presumably may have a significant effect on the dislocation glide. In both materials, the time sweeps of ML pulses have two well-resolved peaks. The position of the peaks along the time axis is substantially dependent on the size of ceramic-forming grains and, to a smaller extent, on the barrier properties of intergrain boundaries. The first peak is associated with plastic deformation preceding disintegration of the crystal structure. The second peak emerges upon crack nucleation as interatomic bonds are ruptured and the material is undergoing local deformation in tips of propagating cracks. The distributions of ML pulse amplitudes (the dependences between the number of pulses and their amplitude) calculated for both peaks individually follow the power law, which demonstrates that the electronic processes having different excitation mechanisms (dislocation motion vs bond rupture) are correlated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of the Guinier–Preston Zones on the Concentration Dependence of the Yield Point of the Aged Two-Component Alloys in Conditions of High-Speed Deformation

The glide of an ensemble of edge dislocations at the high-speed deformation of an aged binary metal alloy is theoretically analyzed. The yield stress of the alloy is a nonmonotone function of the second component concentration, which has a maximum and a minimum under certain conditions. The maximum corresponds to the transfer from the dominating influence of dislocation collective interaction on creation of a spectral gap to the prevalence of the influence of collective interaction of atoms of the second component. The minimum of the obtained curve corresponds to the transfer from the prevalence of the drag of the dislocation by the Guinier–Preston zones to the prevalence of its drag by the atoms of the second component.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗