Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Design technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Current Status of NASA's NEXT-C Ion Propulsion System Development Project

NASA's Evolutionary Xenon Thruster (NEXT) is a 7-kW class gridded ion thruster-based propulsion system that was initially developed from 2002 to 2012 under NASAs In-Space Propulsion Technology Program to meet future science mission requirements. In 2015, a contract was awarded to Aerojet Rocketdyne, with subcontractor ZIN Technologies, to design, build and test two NEXT flight thrusters and two power processing units that would be available for use on future NASA science missions. Because an additional goal of this contract is to take steps towards offering NEXT as a commercialized system, it is called the NEXT-Commercial project, or NEXT-C. This paper reviews the capabilities of the NEXT-C system, status of the NEXT-C project, and the forward plan to build, test, and deliver flight hardware in support of future NASA and commercial applications. It also briefly addresses some of the potential applications that could utilize the hardware developed and built by the project.

Shastry, Rohit↗

Results of NASA Technical Challenge to Demonstrate Two-Speed Drive for Vertical Lift Vehicle

Currently, manned vertical lift vehicles are flown in a manner such that the rotors operate over a narrow range of rotating speed regardless if the vehicle's flight condition is one of vertical takeoff and landing, hover, or forward cruise. The propulsion systems are optimized for operation at the same, corresponding narrow range of rotor speed. However, certain missions and markets benefit greatly if the rotor speed can be adjusted over a wide range of speed to match demands of different missions and flight regimes. A vehicle that can operate with a wide range of rotor speeds would address key barriers to enable new markets and missions for vertical lift vehicles. Key barriers addressed by the wide-range of rotor speed include noise reduced via lower rpm rotor, increase of maximum forward flight speed, increased payload and range, reduced fuel burn, and lower operating costs. A new paradigm for the propulsion system is needed to enable these key benefits. One viable approach is to make use of a two-speed ratio drive system such that the engine can continue to operate over a narrow speed range, whereby engine performance is optimal, while adjusting the rotor speed as needed using the two-speed drive system. Motivated by such needs and by results of several system studies, a NASA Revolutionary Vertical Lift Technology Challenge was established to develop and demonstrate required technologies and designs for achieving a 50% reduction in rotor rpm via a two-speed drive system that incurs less than 2% power loss and maintains current power-to-weight ratios. The technical challenge work was completed and the technical objectives were achieved. This report describes the motivations, the research approach and the significant outcomes.

Transmissions↗

International Life Sciences Research Announcement 'Pick and Eat' Project Contributions

The International Life Sciences Research Announcement (ILSRA) is a grant which focuses on 'Pick and Eat' salad-crop productivity, nutritional value, and acceptability to supplement the International Space Station (ISS) food system. My contributions into this project were to 1) manage the Veggie chambers to maintain optimal plant growth and attend to any plant needs, 2) analyze data for the VEG-04 Science Verification Test to create a water delivery schedule for the astronauts aboard the ISS, and 3) assume the role as a VEG-04 Experiment Verification Test (EVT) 'pseudonaut' to confirm that all schedules and flight procedures produce quality results. The VEG-04 EVT will continue up until the last day of my internship. Additionally, I'm currently working on two independent research projects, both of which provide insight to potential plant growth hardware options for lunar or Martian surfaces. One of which is a cable culture hydroponics system (favorable in areas with highly limited space), and the other are two aeroponic systems (a subset of hydroponics which uses no media and misting as its delivery for water and nutrients). All independent projects are still being tested and therefore results are not yet established. Lastly, I have been in charge of maintaining the AeroGarden (Registered Trademark), a hydroponic-aeroponic hybrid system which is currently being investigated as a concept to the potential for minimizing human involvement in the process of growing plants. This has the potential to play a major role in future technological project designs for spaceflight hardware. This system is an ongoing project that will continue once my internship ends.

Moore, Jessica↗

Modular Damage Detection for Expandable and Inflatable Structures

NASA has identified potential damage from micrometeoroid and orbital debris (MMOD) impacts as a primary threat to Commercial Crew Program vehicles. The International Space Station (ISS) and extraterrestrial habitats also exhibit the risk of damage caused by MMODs. Currently no integrated in-situ or real-time health monitoring damage detection system is being used for expandable and inflatable structures. A novel, modular damage detection system design that incorporates interchangeable and replaceable sensory panels in a foldable architecture is described. The design implements technologies that provide for situational awareness, self-configuration, and damage detection and localization. The system is applicable for the new Gateway and surface and ground support infrastructure

Lewis, Mark E.↗

NASA Lunar Lander Reference Design

With increased emphasis on lunar exploration and scientific investigation, there is a desire to deliver a wide variety of payloads to the lunar surface. Many of these payloads will require the use of surface mobility capability such as a rover. NASA has combined spacecraft and subsystem engineers from across the Agency to develop a ‘pallet’ lander design intended to deliver and easily deploy a medium-sized payload (~300 kg) to the polar regions of the Moon. The lander provides power to the payload from transit soon after lunar landing. The lander is not intended to survive the lunar night. The design of the lander was based on a minimum set of level 1 requirements where traditional risk, mass, and performance trade parameters were weighed lower than cost. In other words, the team did not sacrifice ‘good enough’ for ‘better’ or ‘best.’ As a NASA class D spacecraft (as defined in NPR 8705.4, Risk Classification for NASA Payloads, the lander employs single-string (i.e., zero-fault-tolerant) systems as a baseline. The design utilizes existing technologies and components where possible, though some enhancements have been targeted in areas such as precision autonomous landing and low-cost structural design/fabrication. It is important to note that these and other derived technologies are extensible to other lander designs and missions. This TP describes the requirements and approaches upon which the lander design is based; discusses key design decisions, analyses, and trades used to derive the design; provides a snapshot of each major subsystem; and identifies open items, issues, and challenges for which work is continuing.

L D Kennedy↗

Fluid for Thought: SLS Rocket Aerodynamics featuring Pressure Sensitive Paint

Combining computer vision algorithms, state-of-the-art high-speed cameras, pressure sensitive paint (PSP) and transonic wind tunnel facilities, teams at NASA and Boeing study unsteady pressure over the Space Launch System (SLS) rocket model with unprecedented temporal and spatial data resolution. Post-processing visualizes pressure fluctuations over a 3D model by converting intensity data from videos of the wind tunnel test. Additionally, data analysis creates predictions of buffet forcing and aeroacoustic activity over the rocket body with the accuracy of a CFD model! The development of the technique will revolutionize aerodynamics research and reveal uncharted insights into fluid behavior and vehicle performance, enhancing aerospace technology and design as they advance. The talk will focus on the impact of the PSP technique on the SLS design and other potential aerospace applications, as well as lay out the experimental process, from wind tunnel test to insights from the data analysis.

Lucy Zhonghui Tang↗

FlightStream® Technology Empowers NASA Engineers to Design Unconventional Aircraft

Research in Flight partnered with the NASA SBIR/STTR Program to enhance its FlightStream® software, which engineers use to calculate the aerodynamic performance and feasibility of aircraft concepts, particularly those with no historical performance data. The company has since gained industry recognition, with new customers and continued development with NASA.

Kimberly A Cannon↗

Trailing Ballute Aerocapture : concept and feasibility assessment

This paper addresses critical issues for implementation of the technology, mission design constraints, configuration concepts and overall performance characteristics, including results of aerothermal and aerostability analyses, guidance algorithm design and performance, and overall system characteristics. The effort to date has focused on capture at Mars and Titan.

Wilmoth, Richard G.↗

The Technology Development Status of the Solar Probe

The continuing development of new spacecraft technologies promises to enable the Solar Probe to be the first mission to travel in the atmosphere or corona of the Sun. The most significant technology challenge is the thermal shield that would protect the spacecraft from the flux of 3000 Suns (400 W/cm**2) at the perihelion radius of 4 solar radii while allowing the spacecraft subsystems to operate at near room temperature.

Solar↗

Requirements Development and Management on the Psyche Project

In January 2017, Psyche was one of two mission concepts selected by NASA for flight as part of the 14th Discovery mission competition. The project has been staffing up and maturing the spacecraft, instrument and mission system baseline designs on the path towards a 2022 launch. During much of 2018, the Project has been executing the lifecycle stage called Phase B, “Preliminary Design and Technology Completion,” one key element of which is the development and management of requirements at various levels. In the case of the Psyche project, this process has been particularly unique for several reasons. The project utilizes a Solar Electric Propulsion (SEP) Chassis from Space Systems Loral (SSL), a high volume manufacturer of commercial geostationary (GEO) telecom spacecraft based on the 1300 satellite bus. While SSL has an extensive, well-vetted set of requirements based on their very successful Earth-orbiting product line, translating that heritage to a deep space science mission required special care. In addition to the differences associated with the deep space environment and longer communication times, new interfaces had to be incorporated. While a substantial portion of the Flight System consists of the SEP Chassis, there were several new interfaces within various subsystems between SSL components and those provided by JPL and other contractors. Managing these interfaces through requirements at a relatively higher level than normally seen on internal or external builds proved challenging. Finally, the Psyche spacecraft plans to host the flight terminal of the Deep Space Optical Communications (DSOC) technology demonstration, which is itself a separate project with its own requirements that must be flowed down and managed. This paper will present an overview of the requirement development and management process for the Psyche project. It will discuss in detail the various challenges summarized above, the methods and decisions chosen to address them, and evaluate their overall effectiveness at this stage in the project.

Elkins-Tanton, Linda T.↗

The Causes of Propeller Pitching Moment and the Conditions for its Significance

Recent development of vertical takeoff and landing (VTOL) aircraft has renewed interest in the study of propellers. One metric in particular, the propeller pitching moment, has been observed to be important to VTOL aircraft stability and control in the past. Propellers at angles of attack could not be accurately modeled in generations past due to a lack of computational power, but even with advances in computer technology, modern designers seem to possess insufficient knowledge in this area. In this dissertation, we study the physics behind propeller pitching moment in the context of an isolated propeller and a propeller upstream of a wing. An unsteady 3D vortex lattice method is developed specifically to model propellers at angles of attack and is validated by comparing to high-fidelity CFD analyses. We then use the model to isolate velocity influences to show that the propeller pitching moment is largely caused by two effects: a skewed wake and the presence of wing circulation. Generated maps of propeller pitching moment over a range of operational parameters corresponding to VTOL transition show that the low flight speeds and high angles of attack encountered during transition lead to significant magnitudes of propeller pitching moment that would be difficult to trim using passive methods. Also, derivation of a generalizable metric of significance shows that the peak contribution of propeller pitching moment to aircraft stability is comparable to a longitudinal displacement of the center of gravity by several percent of the wing chord. Finally, we give a concluding discussion on the impact of propeller pitching moment on VTOL aircraft design.

Xiaofan Fei↗

A Cognitive Walkthrough of Multiple Drone Delivery Operations

Advances of early twenty-first century aviation and transportation technologies provide opportunities for enhanced aerial projects, and the overall integration of unmanned aircraft systems (UAS) into the National Airspace System (NAS) has applications across a wide range of operations. Through these, remote operators have learned to manage several UAS at the same time in a variety of operational environments. The present work details a component piece of an ongoing body of research into multi-UAS operations. Beginning in early 2020, NASA has collaborated with Uber Technologies to design and develop concepts of operations, roles and responsibilities, and ground control station (GCS) concepts to enable food delivery operations via multiple, small UAS (sUAS). A cognitive walkthrough was chosen as the method for data collection. This allowed information to be gathered from UAS subject matter experts (SMEs) that could further mature designs for future human-in-the-loop (HITL) simulations; in addition, it allowed information to be collected remotely during the stringent restrictions of the COVID-19 pandemic. Consequently, the described cognitive walkthrough activity utilized remote data collection protocols mediated through the usage of programs designed for presentation and telecommunications. Scenarios were designed, complete with airspace, contingencies, and remedial actions, to be presented to the SMEs. Information was collected using a combination of rating scales and open-ended questions. Results received from the SMEs revealed expected hazards, workloads, and information concerns inherent in the contingency scenarios. SMEs also provided insight into the design of GCS tools and displays as well as the duties and relationships of human operators (i.e., monitors) and automation (i.e., informers and flight managers). Implications of these findings are discussed.

unmanned aircraft systems↗

A Cognitive Walkthrough of Multiple Drone Delivery Operations

Advances of early twenty-first century aviation and transportation technologies provide opportunities for enhanced aerial projects, and the overall integration of unmanned aircraft systems (UAS) into the National Airspace System (NAS) has applications across a wide range of operations. Through these, remote operators have learned to manage several UAS at the same time in a variety of operational environments. The present work details a component piece of an ongoing body of research into multi-UAS operations. Beginning in early 2020, NASA has collaborated with Uber Technologies to design and develop concepts of operations, roles and responsibilities, and ground control station (GCS) concepts to enable food delivery operations via multiple, small UAS (sUAS). A cognitive walkthrough was chosen as the method for data collection. This allowed information to be gathered from UAS subject matter experts (SMEs) that could further mature designs for future human-in-the-loop (HITL) simulations; in addition, it allowed information to be collected remotely during the stringent restrictions of the COVID-19 pandemic. Consequently, the described cognitive walkthrough activity utilized remote data collection protocols mediated through the usage of programs designed for presentation and telecommunications. Scenarios were designed, complete with airspace, contingencies, and remedial actions, to be presented to the SMEs. Information was collected using a combination of rating scales and open-ended questions. Results received from the SMEs revealed expected hazards, workloads, and information concerns inherent in the contingency scenarios. SMEs also provided insight into the design of GCS tools and displays as well as the duties and relationships of human operators (i.e., monitors) and automation (i.e., informers and flight managers). Implications of these findings are discussed.

unmanned aircraft systems↗

A Deployable 40 kWe Lunar Fission Surface Power Concept

Continuous power at the kilowatt level will be imperative for future lunar users including crew infrastructure, future science, and in-situ resource utilization (ISRU). The Compass Team explored both 10 kWe and 40 kWe concepts, assuming planned lander and rover capabilities. Both concepts found that a crew pressurized rover chassis, repurposed for deploying reactor power components, could place a fission surface power system (FSPS) at least one km from users. While the 10 kWe fission power system (FPS) could be deployed as a single unit, the 40 kWe system was too large and had to be deployed in multiple trips with the same rover. Key technologies and design approaches included a high-assay low-enriched uranium (HALEU), yttrium hydride (YH) moderated heat pipe reactor, Stirling convertors, deployable radiators based on International Space Station (ISS) designs, and power conversion/transmission at ±2800 VDC for a one km remote distance.

Fission Power↗

40kW Fission Surface Power System (FSPS) Deployability

Continuous power at the kilowatt level will be imperative for future lunar users including crew infrastructure, future science, and in-situ resource utilization (ISRU). The Compass Team explored both 10 kilowatt electric (kWe) and 40 kWe concepts, assuming planned lander and rover capabilities. Both concepts found that a crew pressurized rover chassis, repurposed for deploying reactor power components, could place a fission surface power system (FSPS) at least one kilometer from users. While the 10 kWe fission power system (FPS) could be deployed as a single unit, the 40 kWe system was too large and had to be deployed in multiple trips with the same rover. Key technologies and design approaches included a high-assay low-enriched uranium (HALEU), yttrium hydride (YH) moderated heat pipe reactor, Stirling convertors, deployable radiators based on International Space Station (ISS) designs, and power conversion/transmission at ±2800 volts of direct current (VDC).

Lunar reactor 40kW fission deployable↗

Space Technology Mission Directorate - Game Changing Development Program - Vertical Solar Array Technology Project

The Vertical Solar Array Technology (VSAT) project is focused on the development of solar array technologies necessary for sustained presence on the lunar surface circa 2028. Existing solar array structures and deployment system technologies are designed for either zero-g or horizontal surface deployment. VSAT will explore vertical array deployment on extension masts of up to 10m in length in order to capture near continuous sun light at the lunar south pole.

GCD↗

Leveraging Medical Operations in the Work of HRP Exploration Medical Capability

Aerospace Medicine focuses on humans in the space and aviation environments. Particularly, through medical system design, advancing technologies for clinical care in remote and extreme environments, and studying the complex physiological changes that occur when humans are placed in these extreme environments, it seeks to prepare humans for the next step of exploration. For reasons of organization and funding, there has historically been a division between NASA’s medical operations team, responsible for clinical care and near-term operations, and the research team, responsible for longer-term exploration mission work. Clinicians typically work for one group or the other. Recently, however, a new “blended clinician” position was created that functions as a bridge between medical operations and research, bringing insight and expertise to both teams.

E.R. Stratton↗