SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The uses of ethylene oxide as a decontaminating agent for planetary quarantine related applications are reported. Aspects discussed include: applications and limitations, chemical and physical properties, germicidal activity, methods of applications, and effects on personnel.
The Apollo 12 photographic observations of clouds produced by venting liquids into space were reduced and analyzed. The number of Baker-Nunn photographs required that film measurement and data processing be automated, and the microdensitometer was adapted to automatic digital operation. Computer programs were prepared to process the image-density measurements. A substantial selection of Apollo 12 data was processed; both hydrogen and oxygen clouds are represented. Some limited data were obtained from Apollo 13 and 14 missions. During the Apollo 12 data analysis, the theory and models of cloud phenomena were refined because the models were initially applied to inferior oxygen data from earlier missions. The reported observations of water dumps from Apollo 12 are also discussed, along with the use of the oxygen and hydrogen data from Apollo 12 photographs with the cloud models.
Cat-a-lac Black, and S13G thermal control coatings were exposed to the exhaust of a thruster in a simulated space environment. Vacuum was maintained at less than 10 to the minus 5th power torr during thruster firing in the liquid helium cooled facility. The thruster was fired in a 50-millisecond pulse mode and the accumulated firing time was 224 seconds. Solar absorptance (alpha sub s) and thermal emittance (sigma) of the coatings were measured in-situ at intervals of 300 pulses. A calorimetric technique was used to measure alpha sub s and sigma. The tests, technique, and test results are presented. The Cat-a-lac Black coatings showed no change in alpha sub s or sigma. The S13G showed up to 25 percent increase in alpha sub s but no change in sigma.
An instrument for in situ vacuum detection of surface reflectance changes at 1216A was designed. Using successive reflections, this instrument is more sensitive as an indicator of reflectance changes than similar instruments having only a single reflection. The selection of each component of the instrument and its operational performance is discussed.
The flux of molecules emitted by a spacecraft and subsequently reflected to its surface was investigated. The reflection occurs upon collision of the outgassed molecules with ambient molecules. Evaluation of the flux was based on a knowledge of the spacecraft outgassing rate, the spacecraft dimensions, and the orbit parameters. Condensation rates and adsorption layers on critical surfaces were calculated from the knowledge of this flux and the nature and temperature of the gas and the surface. Based on estimated and measured emission rates, calculation of these parameters was performed for a number of spacecraft. The relationships and graphs developed allow an estimate of several important parameters for an orbiting spacecraft to be made. The pressures and densities at various distances from the spacecraft, as produced by the surrounding ambient molecules and by the spacecraft's own outgassing, are presented. The pressure and density produced by the outgassing can be obtained as a function of time if the behavior of the outgassing with time is known. The number of desorbed molecules ionized by impact with ambient charged particles and the effect of the spacecraft's electric field on polarized desorbed molecules were considered.
Solubilization studies were carried out on various cured silicone resins. A solvent spectrum was prepared. It was found that complete dissolution of cured silicone resins could be achieved without extensive physical degradation of samples. Based on the solubilization results, amine solvents were selected for spore viability studies.
Contact resistance has been used to characterize the processes of physical contact in metallic systems with ultra clean surfaces. The contact resistance versus load curves of iron and two cobalt alloys were used to demonstrate the existence of surface work hardening and interfacial creep during contact as well as the fracture characteristics of an interfacial junction as the load is removed. The presence of an adsorbed film of hydrogen or hydrogen ions on iron completely changes the contact process. A comparison of the contact resistance versus load data for ultra pure iron, an iron-cobalt alloy and a cobalt molybdenum-chromium was used to illustrate the effect of substrate mechanical properties on static adhesion and the ability to convert these data for the estimation of the dynamic coefficient of friction under the particular experimental conditions.
Cat-a-lac Black and S13G thermal control coatings were exposed to the exhaust of a thrustor in a simulated space environment. Vacuum was maintained at less than 10 microtorr during thrustor firing in the liquid helium cooled facility. The thrustor was fired in a 50-millisecond pulse mode, and the accumulated firing time was 224 seconds. Solar absorptance and thermal emittance of the coatings were measured in-situ at intervals of 300 pulses, using a calorimetric technique. The Cat-a-lac Black coatings showed no change in solar absorptance or thermal emittance. The S13G showed up to 25% increase in solar absorptance but no change in thermal emittance.
The flux of molecules emitted by the satellite and subsequently returning to its surface is investigated. The reflection occurs upon collision of these with ambient molecules. The evaluation of this flux is carried out from a knowledge of the outgassing rate of the satellite, its dimensions, and the orbit parameters. Condensation rates and adsorption layers on critical surfaces are calculated from the knowledge of this flux, and from the natures and temperatures of the gas and the surface. The calculation of these parameters, based on estimated and in some cases measured emission rates, has been carried out for a number of satellites. These developed relationships and graphs allow the estimation of several important parameters for an orbiting satellite. This report presents the pressures and densities at various distances from the satellite as produced by the surrounding ambient molecules and by the outgassing of the satellite.
Contact resistance has been used to characterize the processes of physical contact in metallic systems with ultraclean surfaces. The contact resistance versus load curves of iron and two cobalt alloys were used to demonstrate the existence of surface work hardening and interfacial creep during contact as well as the fracture characteristics of an interfacial junction as the load is removed. The presence of an adsorbed film of hydrogen or hydrogen ions on iron completely changes the contact process. A comparison of the contact resistance versus load data for ultrapure iron, and iron-cobalt alloy, and a cobalt molybdenum-chromium was used to illustrate the effect of substrate mechanical properties on static adhesion and the ability to convert these data for the estimation of the dynamic coefficient of friction under the particular experimental conditions.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Economical, simple, and fast method uses apparatus which detects bacteria by photography. Apparatus contains camera, film assembly, calibrated light bulb, opaque plastic plate with built-in reflecting surface and transparent window section, opaque slide, plate with chemical packages, and cover containing roller attached to handle.
The sensor is a mass spectrometer system which continuously monitors the atmospheric constituents of hydrogen, water vapor, nitrogen, oxygen, and carbon dioxide, and monitors the Freons on a demand sampling basis. The manual provides a system description, operational procedures, and maintenance and troubleshooting instructions. Circuit diagrams are included.
An instrument for monitoring the carbon monoxide content of the ambient atmosphere is described. The subjects discussed are: (1) theory of operation, (2) system features, (3) controls and monitors, (4) operational procedures, and (5) maintenance and troubleshooting. Block drawings and circuit diagrams are included to clarify the text.
The effects and prevention of possible mercury pollution from the failure of solar electric propulsion spacecraft using mercury propellant were studied from tankage loading of post launch trajector injection. During preflight operations and initial flight mode there is little danger of mercury pollution if proper safety precautions are taken. Any spillage on the loading, mating, transportation, or launch pad areas is obvious and can be removed by vacuum cleaning soil and chemical fixing. Mercury spilled on Cape Kennedy ground soil will be chemically complexed and retained by the sandstone subsoil. A cover layer of sand or gravel on spilled mercury which has settled to the bottom of a water body adjacent to the system operation will control and eliminate the formation of toxic organic mercurials. Mercury released into the earth's atmosphere through leakage of a fireball will be diffused to low concentration levels. However, gas phase reactions of mercury with ozone could cause a local ozone depletion and result in serious ecological hazards.
An investigation was made to determine (1) sporicidal properties of amine solvents that solubilize silicon resins, (2) recovery properties of a silicon potting compound (RTV 41) used in spacecraft, and (3) viability of spores during chemical curing of the potting compound. Results show that: (1) spores do remain viable during RTV 41 silicon potting chemical curing, and (2) spore recovery from cured silicon potting compound RTV 41 is very high when silicon rubber is dissolved in butylamine and series dilution with benzene prior to plate curing.
A preliminary study was conducted of the feasibility of space disposal of the actinide class of radioactive waste material. This waste was assumed to contain 1 and 0.1 percent residual fission products, since it may not be feasible to completely separate the actinides. The actinides are a small fraction of the total waste but they remain radioactive much longer than the other wastes and must be isolated from human encounter for tens of thousands of years. Results indicate that space disposal is promising but more study is required, particularly in the area of safety. The minimum cost of space transportation would increase the consumer electric utility bill by the order of 1 percent for earth escape and 3 percent for solar escape. The waste package in this phase of the study was designed for normal operating conditions only; the design of next phase of the study will include provisions for accident safety. The number of shuttle launches per year required to dispose of all U.S. generated actinide waste with 0.1 percent residual fission products varies between 3 and 15 in 1985 and between 25 and 110 by 2000. The lower values assume earth escape (solar orbit) and the higher values are for escape from the solar system.