Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Containers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Drawing with Iron on a Gel Containing a Supramolecular Siderophore

Guanosine-5'-hydroxamic acid (3) forms hydrogels when mixed with guanosine (1) and KCl. The 5'-hydroxamic acid (HA) unit is pH-responsive and also chelates Fe 3+ . When gels are prepared under basic conditions, the 5'-HA groups are deprotonated and the anionic hydrogel binds cationic thiazole orange (TO), signaled by enhanced fluorescence. The HA nucleoside 3, when immobilized in the G-quartet gel, acts as a supramolecular siderophore to form red complexes with Fe 3+ . We patterned the hydrogel's surface with FeCl 3 , by hand and by using a 3D printer. Patterns form instantly, are visible by eye, and can be erased using vitamin C. This hydrogel, combining self-assembled G-quartet and siderophore–Fe 3+ motifs, is strong, can be molded into different shapes, and is stable on the bench or under salt water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Amphiphilic Heterografted Molecular Bottlebrushes with Tertiary Amine-Containing Side Chains as Efficient and Robust pH-Responsive Emulsifiers

Here, by combining the unique characteristics of molecular bottlebrushes (MBBs) and the properties of stimuli-responsive polymers, we show that MBBs with randomly grafted poly(n-butyl acrylate) and pH-responsive poly(2-(N,N-diethylamino)ethyl methacrylate) (PDEAEMA) side chains are efficient and robust pH-responsive emulsifiers. Water-in-toluene emulsions were formed at pH 4.0 and disrupted by increasing the pH to 10.0. The emulsion generation and disruption was reversible over the ten cycles investigated, and the bottlebrushes remained intact. The exceptional emulsion stability stemmed from the high interfacial binding energy of MBBs, imparted by their large molecular size and Janus architecture at the interface, as evidenced by the interfacial jamming and wrinkling of the assemblies upon reducing the interfacial area. At pH 10.0, PDEAEMA became water-insoluble, and the MBBs desorbed from the interface, causing de-emulsification. Consequently, we have shown that the judicious design of MBBs can generate properties of particle emulsifiers from their large size, while the responsiveness of the MBBs enables more potential applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Layer-by-Layer Organic Solar Cells Enabled by 1,3,4-Selenadiazole-Containing Crystalline Small Molecule with Double-Fibril Network Morphology

A double-fibril network of the photoactive layer morphology is recognized as an ideal structure facilitating exciton diffusion and charge carrier transport for high-performance organic solar cells (OSCs). However, in the layer-by-layer processed OSCs (LbL-OSCs), polymer donors and small molecule acceptors (SMAs) are separately deposited, and it is challenging to realize a fibril network of pure SMAs with the absence of tight interchain entanglement as polymers. Here, in this work, crystalline small molecule donors (SMDs), named TDZ-3TR and SeDZ-3TR, were designed and introduced into the L8-BO acceptor solution, forcing the phase separation and molecular fibrilization. SeDZ-3TR showed higher crystallinity and lower miscibility with L8-BO acceptor than TDZ-3TR, enabling more driving force to favor the phase separation and better molecular fibrilization of L8-BO. On the other hand, two donor polymers of PM6 and D18 with different fibril widths and lengths were put together to optimize the fibril network of the donor layer. The simultaneously optimization of the acceptor and donor layers resulted in a more ideal double-fibril network of the photoactive layer and an impressive power conversion efficiency (PCE) of 19.38 % in LbL-OSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Electrospun fibers of poly( l ‐lactic acid) containing lovastatin with potential applications in drug delivery

ABSTRACT Lovastatin (Merck's Mevacor) is a statin drug designed to lower cholesterol, and reduce the risk of heart attack and stroke. We use electrospinning to combine the biomedical properties of lovastatin with the advantages of electrospun fibers to prepare a composite biomaterial for lovastatin delivery. Poly( l ‐lactic acid) (PLLA), a biodegradable and biocompatible polymer, was co‐spun with lovastatin. Incorporation of lovastatin at 5 or 10 wt % improved fiber alignment and surface smoothness, and increased fiber diameter. Influence of lovastatin on the phase structure (crystal, mobile amorphous, and rigid amorphous fractions) was investigated using scanning calorimetry and synchrotron X‐ray scattering. Addition of lovastatin resulted in increased crystallinity and reduced mobile amorphous fraction. PLLA fibers were characterized in terms of their drug release kinetics in comparison to PLLA film. High drug entrapment efficiency (ranging from 72% to 82%) and appropriate release profiles were achieved. In vitro drug release studies demonstrated that release occurred in two stages: an initial rapid release over the first day and a slower second stage of release which approached a plateau after 7 days. PLLA fibers have a higher release rate than comparable film. Electrospun biomaterial fibers of PLLA provide a promising new release strategy for delivery of lovastatin. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45287.

Zhu, Yazhe↗
DOE OSTI2013

Formation of a Metalloporphyrin-Based Nanoreactor by Postsynthetic Metal-Ion Exchange of a Polyhedral-Cage Containing a Metal-Metalloporphyrin Framework

A change for the better: Exchange of Cd II in the catalytically inactive framework MMPF-5 (see scheme) with Co II afforded a metalloporphyrin-based nanoreactor, MMPF-5(Co). This framework, consisting of small cubicuboctahedral cages, demonstrated interesting performances in the catalytic epoxidation of trans-stilbene with tBuOOH.

Wang, Xi-Sen↗
DOE OSTI2017

Simple and Efficient Synthesis of Explosive Cocrystals containing 3,5-Dimethylpyrazol-1-yl-substituted-1,2,4,5-tetrazines

The reaction of 3,4–dinitropyrazole, 5–nitrotetrazole, or 4–nitro–1,2,3–triazole with 1,2,4,5–tetrazines substituted with 3,5–dimethylpyrazolyl (dmp) groups results in energetic cocrystals after 1 minute of reflux and cooling to room temperature in yields of 89–92 %. Hydrogen–bonding between the dmp group to the N–H of the energetic heterocycles are the predominant interaction that stabilizes the new cocrystals. Each cocrystal packs in a different lattice structure and the cocrystals with sheet–like and herring–bone crystal packing orientations are less sensitive than the cocrystal with the interlocked structure. Electrostatic potential mapping helps rationalize why dmp–substituted tetrazines readily form cocrystals, whereas more electron–deficient pyrazolyl tetrazines do not. Furthermore, the calculated energetic performance of the new cocrystals approaches that of 2,4,6–trinitrotoluene (TNT) and importantly, these materials will aid in the rational design of new cocrystalline energetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

The Preparation of Luminescent, Mechanochromic Molecular Containers from Non‐Emissive Components: The Box Cations, [Au 6 (Triphos) 4 Br] 5+ and [Au 6 (Triphos) 4 Br 2 ] 4+

Abstract Two new molecular boxes, the mono‐bromo box [Au 6 (Triphos) 4 Br](SbF 6 ) 5 ⋅6(CH 2 Cl 2 ), 4 mB , and the dibromo box, [Au 6 (Triphos) 4 Br 2 ⋅H 2 O](SbF 6 ) 4 ⋅4(CH 2 Cl 2 ), 5 dB , have been prepared in crystalline form. Although constructed from non‐luminescent components, both are strongly luminescent. Like its chloro counterpart, the mono‐bromo box [Au 6 (Triphos) 4 Br](SbF 6 ) 5 ⋅6(CH 2 Cl 2 ), 4 mB , is mechanochromic. Under grinding, it loses its luminescence. The bromo‐bridged helicate, [(μ‐Br){Au 3 (Triphos) 2 } 2 ](CF 3 SO 3 ) 5 ⋅2(CH 2 Cl 2 ), 3μ‐H , with a cation that is isomeric with the box [Au 6 (Triphos) 4 Br] 5+ , has also been prepared and crystallographically characterized. Unlike its chloro analogue, [(μ‐Br){Au 3 (Triphos) 2 } 2 ](CF 3 SO 3 ) 5 ⋅2(CH 2 Cl 2 ) is not luminescent. Thus, the cation produced upon grinding may be the cation present in the bromo‐bridged helicate, [(μ‐Br){Au 3 (Triphos) 2 } 2 ](CF 3 SO 3 ) 5 ⋅2(CH 2 Cl 2 ), 3μ‐H . The dibromo box, [Au 6 (Triphos) 4 Br 2 ⋅H 2 O](SbF 6 ) 4 ⋅4(CH 2 Cl 2 ), 5 dB , is not significantly mechanochromic.

Walters, Daniel T.↗
DOE OSTI2022

Distinct Bimetallic Cooperativity Among Water Reduction Catalysts Containing [Co III Co III ], [Ni II Ni II ], and [Zn II Zn II ] Cores

We report three binuclear species [LCo III 2 (μ-Pz) 2 ](ClO 4 ) 3 (1), [LNi II 2 (CH 3 OH) 2 Cl 2 ]ClO 4 (2), and [LZn II 2 Cl 2 ]PF 6 (3) supported by the deprotonated form of the ligand 2,6-bis[bis(2-pyridylmethyl) amino-methyl]-4-methylphenol were synthesized, structurally characterized as solids and in solution, and had their electrochemical and spectroscopic behavior established. Species 1–3 had their water reduction ability studied aiming to interrogate the possible cooperative catalytic activity between two neighboring metal centers. Species 1 and 2 reduced H 2 O to H 2 effectively at an applied potential of -1.6 V Ag/AgCl , yielding turnover numbers of 2,820 and 2,290, respectively, after 30 minutes. Species 3 lacked activity and was used as a negative control to eliminate the possibility of ligand-based catalysis. Pre- and post-catalytic data gave evidence of the molecular nature of the process within the timeframe of the experiments. Species 1 showed structural, rather than electronic cooperativity, while species 2 displayed no obvious cooperativity. DFT methods complemented the experimental results determining plausible mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

ThH 5 : An Actinide–Containing Superhalogen Molecule

Thorium and its compounds have been widely investigated as important nuclear materials. Previous research focused on the potential use of thorium hydrides, such as ThH 2 , ThH 4 , and Th 4 H 15 , as nuclear fuels. Here, we report studies of the anion, ThH 5 , by anion photoelectron spectroscopy and computations. The resulting experimental and theoretical vertical detachment energies (VDE) for ThH 5 are 4.09 eV and 4.11 eV, respectively. These values and the agreement between theory and experiment facilitated the characterization of the structure of the ThH 5 anion and showed its neutral counterpart, ThH 5 to be a superhalogen. ThH 5 , which exhibits a C 4v structure with five Th–H single bonds, possesses the largest known H/M ratio among the actinide elements, M. Here, the adaptive natural density partitioning (AdNDP) method was used to further analyze the chemical bonding of ThH 5 – and to confirm the existence of five Th–H single bonds in the ThH 5 – molecular anion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Zn–MOFs Containing Pyridine and Bi­pyridine Carboxylate Organic Linkers and Open Zn 2+ Sites

Two Zn-based metal-organic frameworks (Zn-MOFs) were solvothermally synthesized using two pyridine-based carboxylate linkers to generate unique pore topologies, as evidenced by single-crystal XRD analysis. These Zn-MOFs provided coordinatively unsaturated Zn 2+ sites with square-pyramidal geometry, leading to an enhanced interaction with CO 2 , as demonstrated by sub-atmospheric pressure isotherms. The presence of open Zn 2+ sites in these MOFs was validated by Raman spectroscopy under atmospheric CO 2 , revealing the presence of CO 2 chemisorbed on surface sites. Additionally, in situ DRIFT spectra of chemisorbed acetic acid provided evidence for the formation of acetate-Zn 2+ species after adsorption compared to IRMOF-1, which showed only physisorbed acetic acid species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis, Structural Characterization and Chemical Bonding of Sr 7 Li 6 Sn 12 and its Quaternary Derivatives with Eu and Alkaline Earth Metal (Mg, Ca, Ba) Substitutions. A Tale of Seven Li‐Containing Stannides and Two Complex Crystal Structures

In this paper, we discuss the synthesis and the structural characterization of the new ternary compound Sr 7 Li 6 Sn 12 and its six quaternary derivatives, where alkaline earth metals (Ca, Mg, Ba) and the rare earth metal Eu are substituted, yielding crystalline phases of monoclinic or orthorhombic symmetry. The title compounds were synthesized via high‐temperature solid‐state reactions of the corresponding elements. The crystal structures were determined by single‐crystal X‐ray diffraction methods. The (Sr,Ca) 7 Li 6 Sn 12 and Eu 7 (Mg,Li) 6 Sn 12 phases represent a new structure type (space group P 2/ m , No. 10) while Sr 7 Li 6 Sn 12 and the rest of the title phases crystallize in the orthorhombic base‐centered space group Cmmm (No. 65) which is similar to the Eu 7 Li 8– x Sn 10+ x ( x ≈ 2.0) phase with the Ce 7 Li 8 Ge 10 structure type (Pearson code oC 50). Careful examination of the resulting structures shows intricate disordering between Li and Sn atoms, which is governed by the total number of valence electrons. The discussion of experimental results is also supported by DFT electronic structure calculations.

Osman, Hussien H.↗
DOE OSTI2022

Lithium-Ion Mobility in Layered Oxide Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 Containing Lithium on both Intra and Inter‐Stack Positions

With the aid of neutron diffraction and electrochemical impedance spectroscopy, we have demonstrated the effect of the increase in lithium concentration and distribution on Li-ion conductivity. This has been done through the synthesis of a layered oxide Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 , with the so-called Ruddlesden-Popper type structure, where bilayer stacks of (Ta/Ti)O 6 octahedra are separated by lithium ions, located in inter-stack spaces. There are also intra-stack spaces that are occupied by a mixture of La and Li, as confirmed by neutron diffraction. The distribution of lithium over both inter- and intra-stack positions leads to the enhancement of Li-ion conductivity in Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 compared to Li 2 La(TaTi)O 7 , which has a lower concentration of lithium ions, located only in inter-stack spaces. Furthermore, the analyses of real and imaginary components of electrochemical impedance data confirm the enhanced mobility of ions in Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 . While the Li-ion conductivity needs further improvement for practical applications, the success of the strategy implemented in this work offers a useful methodology for the design of layered ionic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Comparing π‐complexation capabilities of ionic liquids containing silver(I) and copper(I) ions by headspace single drop microextraction in combination with high‐performance liquid chromatography

Selective π‐complexation capabilities of silver(I) and copper(I) ions can be effectively facilitated in ionic liquids. To understand the effects of environmental factors that influence the π‐complexation of these metal ions with analytes, techniques that employ small volumes of ionic liquid that can be readily analyzed are desired. In this study, headspace single drop microextraction coupled with HPLC is used to investigate a diverse set of environmental factors on the metal ion‐mediated complexation with aromatic compounds in ionic liquid media. Silver(I) and copper(I) bis[(trifluoromethyl)sulfonyl]imide salts were both studied by dissolving them in the 1‐decyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ionic liquid and employing the mixture as extraction media for aromatic compounds. Water and acetonitrile within the sample solution were observed to interfere with the complexation of silver(I) ions and aromatic compounds, while ethylene glycol and triethylene glycol did not. The temperature and extraction times were optimized to fully facilitate the π‐complexation capabilities of metal ions in ionic liquid media. Partition coefficients between the sample headspace and metal ion were determined using a three‐phase equilibria model. Although no discernable difference in analyte partitioning between the headspace and ionic liquid solvent was observed, analyte partition coefficients to silver(I) ion tended to be greater compared to copper(I) ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗