Low-Overpotential Water Oxidation by a Surface-Bound Ruthenium-Chromophore-Ruthenium-Catalyst Assembly
Explore the source record for details and available documents.
catalysis (heterogeneous)↗
SEARCH · Engineering Papers
Results for “Cell assembly”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Phase 1 of the automated array assembly task of the low cost silicon solar array project
The state of technology readiness for the automated production of solar cells and modules is reviewed. Individual process steps and process sequences for making solar cells and modules were evaluated both technically and economically. High efficiency with a suggested cell goal of 15% was stressed. It is concluded that the technology exists to manufacture solar cells which will meet program goals.
Coleman, M. G.↗
Experimental measurements of fuel and water crossover in an active DMFC
This work measured polarization curves as well as the high-frequency resistance of active direct methanol fuel cell (DMFC) operates at around 80 °C with active controls of temperature, methanol concentration, airflow rate, and relative humidity. The relative humidity of the air did not have noticeable impacts on the fuel cell unless the operating temperature was near the evaporation temperature of water (100 °C). The hydrophobic water management layer (WML) between the membrane electrode assembly (MEA) and cathode air channel increases the mass transfer resistance and improves the water retention in MEA. Adding a WML increased the peak power density, decreased the ohmic resistance, and improved the fuel efficiency of the fuel cell, especially when it operated near 100 °C. This study also quantitatively measured methanol and water crossover as well as the fuel efficiency at different operating currents. The fuel efficiency increased significantly with the increase of the current density. Using a hydrophobic fuel management layer (FML) between the anode fuel channel and MEA reduced the fuel and water crossover rates and increased the ohmic resistance due to the decrease of the water content of the Nafion membrane. The FML improved fuel efficiency by reducing the methanol crossover. The combination of the FML and WML enabled the steady operation of DMFC using highly concentrated methanol solutions (up to 75 wt%).
08 HYDROGEN↗
Site Requirements for the Adsorption and Reaction of Oxygenates on Metal Oxide Surfaces
Explore the source record for details and available documents.
bio-inspired↗
A common assembly module in injectisome and flagellar type III secretion sorting platforms
Translocating proteins across the double membrane of Gram-negative bacteria, type III secretion systems (T3SS) occur in two evolutionarily related forms: injectisomes, delivering virulence factors into host cells, and the flagellar system, secreting the polymeric filament used for motility. While both systems share related elements of a cytoplasmic sorting platform that facilitates the hierarchical secretion of protein substrates, its assembly and regulation remain unclear. Here we describe a module mediating the assembly of the sorting platform in both secretion systems, and elucidate the structural basis for segregation of homologous components among these divergent T3SS subtypes sharing a common cytoplasmic milieu. These results provide a foundation for the subtype-specific assembly of T3SS sorting platforms and will support further mechanistic analysis and anti-virulence drug design.
Science & Technology - Other Topics↗
Deuterium Concentration Effects on Cell Cycle Progression
Deuterium (D), which is found in natural water at ~ 150 ppm, seems to play an important role in biology. For example, D concentrations above 150 ppm are known to produce toxic effects in many organisms. There is also evidence to suggest D levels significantly less than 150 ppm can cause delays in progression through the normal mitotic cell cycle. Some have even theorized that the D:H ratio in cells may impact an organism’s radiation resistance. Therefore, evaluating the role of D and the D:H ratio in eukaryotic and prokaryotic cells should lead to a better understanding of cell cycle progression and radiation resistance in these organisms. Research in this field has likely been stalled by the limited availability of D 2 O with varying D concentrations needed to accurately study the deuterium effects. However, SRNL can currently manufacture D 2 O in varying concentrations, and we have assembled a unique team of radiation biologists, microbiologists, radiochemists, and health physics to form an interdisciplinary research group to study the cell cycle as a function of D concentration in order to address several fundamental science questions. Proposed work in FY20 was a collaborative effort with Augusta University to utilized BSL-2 mammalian cell lines. Lab work was halted due to the COVID-19 pandemic. An intensive literature review was performed and identified pertinent knowledge gaps that could be filled in future research efforts.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Extending the low-temperature operation of sodium metal batteries combining linear and cyclic ether-based electrolyte solutions
Nonaqueous sodium-based batteries are ideal candidates for the next generation of electrochemical energy storage devices. However, despite the promising performance at ambient temperature, their low-temperature (e.g., < 0 °C) operation is detrimentally affected by the increase in the electrolyte resistance and solid electrolyte interphase (SEI) instability. Here, to circumvent these issues, we propose specific electrolyte formulations comprising linear and cyclic ether-based solvents and sodium trifluoromethanesulfonate salt that are thermally stable down to –150 °C and enable the formation of a stable SEI at low temperatures. When tested in the Na||Na coin cell configuration, the low-temperature electrolytes enable long-term cycling down to –80 °C. Via ex situ physicochemical (e.g., X-ray photoelectron spectroscopy, cryogenic transmission electron microscopy and atomic force microscopy) electrode measurements and density functional theory calculations, we investigate the mechanisms responsible for efficient low-temperature electrochemical performance. We also report the assembly and testing between –20 °C and –60 °C of full Na||Na 3 V 2 (PO 4 ) 3 coin cells. The cell tested at –40 °C shows an initial discharge capacity of 68 mAh g –1 with a capacity retention of approximately 94% after 100 cycles at 22 mA g –1 .
25 ENERGY STORAGE↗
Polymerized Small Molecular Acceptor with Branched Side Chains for All Polymer Solar Cells with Efficiency over 16.7%
The power conversion efficiencies (PCEs) of small molecule acceptor (SMA)-based organic solar cells have already exceeded 18%. However, the development of polymer acceptors still lags far behind their SMA counterparts mainly due to the lack of efficient polymer acceptors. In this work, a series of polymer acceptors named PY-X (with X being the branched alkyl chain) are designed and synthesized by employing the same central core with the SMA L8-BO but with different branched alkyl chains on the pyrrole motif. It is found that the molecular packing of SMA-HD featuring 2-hexyldecyl side chain used in the synthesis of PY-HD is similar to L8-BO, in which the branched alkyl chains lead to condensed and high-order molecular assembly in SMA-HD molecules. When combined with PM6, PY-HD-based all polymer solar cell (all-PSC) exhibits a high PCE of 16.41%, representing the highest efficiency for the binary all-PSCs. Moreover, the side-chain modification on the pyrrole site position further improves the performance of the all-PSCs, and the PY-DT-based device delivers a new record high efficiency of 16.76% (certified as 16.3%). The work provides new insights for understanding the structure–property relationship of polymer acceptors and paves a feasible avenue to develop efficient conjugated polymer acceptors.
14 SOLAR ENERGY↗
Super-Joule heating in graphene and silver nanowire network
Transistors, sensors, and transparent conductors based on randomly assembled nanowire networks lean on multi-component percolation for unique and distinctive applications in flexible electronics, biochemical sensing, and solar cells. Although conduction models for 1-D and 1-D/2-D networks have been developed, typically assuming linear electronic transport and self-heating, the model has not been validated by direct high-resolution characterization of coupled electronic pathways and thermal response. In this letter, we show the occurrence of nonlinear “super-Joule” self-heating at the transport bottlenecks in networks of silver nanowires and silver nanowire/single layer graphene hybrid using high resolution thermoreflectance (TR) imaging. TR images at the microscopic self-heating hotspots within nanowire network and nanowire/graphene hybrid network devices with submicron spatial resolution are used to infer electrical current pathways. The findings encourage a fundamental reevaluation of transport models for network-based percolating conductors.
42 ENGINEERING↗
Spatial homogenization of thermal feedback regions in Monte Carlo reactor calculations
An integrated thermal-hydraulic feedback module has previously been developed for the Monte Carlo transport solver, MC21. The module incorporates a flexible input format that allows the user to describe heat transfer and coolant flow paths within the geometric model at any level of spatial detail desired. The effect that the varying levels of spatial homogenization of thermal regions has on the accuracy of the Monte Carlo simulations is examined in this study. Six thermal feedback mappings are constructed from the same geometric model of the Calvert Cliffs core. The spatial homogenization of the thermal regions is varied, giving each scheme a different level of detail, and the adequacy of the spatial homogenization is determined based on the eigenvalue produced by each Monte Carlo calculation. The purpose of these numerical experiments is to determine the level of detail necessarily to accurately capture the thermal feedback effect on reactivity. Several different core models are considered: axial-flow only, axial and lateral flow, asymmetry due to control rod insertion, and fuel heating (temperature -dependent cross sections). The thermal results generated by the MC21 thermal feedback module are consistent with expectations. Based upon the numerical experiments conducted it is concluded that the amount of spatial detail necessary to accurately capture the feedback effect on reactivity is relatively small. Homogenization at the assembly level for the Calvert Cliffs PWR model results in a similar power defect to that calculated with individual pin-cells modeled as explicit thermal regions. (authors)
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Visible photoelectrochemical water splitting into H 2 and O 2 in a dye-sensitized photoelectrosynthesis cell
A hybrid strategy for solar water splitting is exploited here based on a dye-sensitized photoelectrosynthesis cell (DSPEC) with a mesoporous SnO 2 /TiO 2 core/shell nanostructured electrode derivatized with a surface-bound Ru(II) polypyridyl-based chromophore–catalyst assembly. The assembly, [(4,4’-(PO 3 H 2 ) 2 bpy) 2 Ru(4-Mebpy-4’-bimpy)Ru(tpy)(OH 2 )] 4+ ([RuaII-RubII-OH 2 ] 4+ , combines both a light absorber and a water oxidation catalyst in a single molecule. It was attached to the TiO 2 shell by phosphonate-surface oxide binding. The oxide-bound assembly was further stabilized on the surface by atomic layer deposition (ALD) of either Al 2 O 3 or TiO 2 overlayers. Illumination of the resulting fluorine-doped tin oxide (FTO)|SnO 2 /TiO 2 |-[Ru a II -Ru b II -OH 2 ] 4+ (Al 2 O 3 or TiO 2 ) photoanodes in photoelectrochemical cells with a Pt cathode and a small applied bias resulted in visible-light water splitting as shown by direct measurements of both evolved H 2 and O 2 . The performance of the resulting DSPECs varies with shell thickness and the nature and extent of the oxide overlayer. Use of the SnO 2 /TiO 2 core/shell compared with nanoITO/TiO 2 with the same assembly results in photocurrent enhancements of ~5. In conclusion, systematic variations in shell thickness and ALD overlayer lead to photocurrent densities as high as 1.97 mA/cm 2 with 445-nm, ~90-mW/cm 2 illumination in a phosphate buffer at pH 7.
36 MATERIALS SCIENCE↗
Penetration of multiple thin films in micrometeorite capture cells
As part of a continuing effort to develop cosmic dust detectors/collectors for use in space, we performed a series of hypervelocity impact experiments on combined sensor/capture-cell assemblies using 10-200-micron-diameter glass projectiles and olivine crystals at velocities of 0.9-14.4 km/s. The design objective of the space-flight instrument is to measure the trajectories of individual particles with sufficient accuracy to permit identification of their parent bodies and to capture enough impactor material to allow chemical and isotopic analyses of samples returned to Earth. Three different multiple-film small-particle capture cell designs (0.1-100-micron-thick Al foils with approx. 10, 100, and 1800 micron spacing) were evaluated for their ability to capture impactor fragments and residue. Their performances were compared to two other types of capture cells, foil covered Ge crystals, and 0.50 and 0.120 g/cu cm aerogels. All capture cells were tested behind multifilm (1.4-6.0-micron-thick) polyvinylidene fluoride (PVDF) velocity/trajectory sensor devices. Several tests were also done without the PVDF sensors for comparison. The results of this study were reported by Simon in a comprehensive report in which the morphology of impacts and impactor residues in various types of capture cells after passage through two PVDF sensor films is discussed. Impactor fragments in selected capture cells from impacts at velocities up to 6.4 km/s were identified using scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS).
Simon, Charles G.↗
Origin and Nature of Bond Rotation Barriers: A Unified View
Explore the source record for details and available documents.
catalysis (heterogeneous)↗
Supramolecular assembly of polycation/mRNA nanoparticles and in vivo monocyte programming
Size-dependent phagocytosis is a well-characterized phenomenon in monocytes and macrophages. However, this size effect for preferential gene delivery to these important cell targets has not been fully exploited because commonly adopted stabilization methods for electrostatically complexed nucleic acid nanoparticles, such as PEGylation and charge repulsion, typically arrest the vehicle size below 200 nm. Here, we bridge the technical gap in scalable synthesis of larger submicron gene delivery vehicles by electrostatic self-assembly of charged nanoparticles, facilitated by a polymer structurally designed to modulate internanoparticle Coulombic and van der Waals forces. Specifically, our strategy permits controlled assembly of small poly(β-amino ester)/messenger ribonucleic acid (mRNA) nanoparticles into particles with a size that is kinetically tunable between 200 and 1,000 nm with high colloidal stability in physiological media. We found that assembled particles with an average size of 400 nm safely and most efficiently transfect monocytes following intravenous administration and mediate their differentiation into macrophages in the periphery. When a CpG adjuvant is co-loaded into the particles with an antigen mRNA, the monocytes differentiate into inflammatory dendritic cells and prime adaptive anticancer immunity in the tumor-draining lymph node. This platform technology offers a unique ligand-independent, particle-size-mediated strategy for preferential mRNA delivery and enables therapeutic paradigmsviamonocyte programming.
Science & Technology - Other Topics↗
Guanidinium-Assisted Surface Matrix Engineering for Highly Efficient Perovskite Quantum Dot Photovoltaics
Metal halide perovskite quantum dots (Pe-QDs) are of great interest in new-generation photovoltaics (PVs). However, it remains challenging in the construction of conductive and intact Pe-QD films to maximize their functionality. Herein, a ligand-assisted surface matrix strategy to engineer the surface and packing states of Pe-QD solids is demonstrated by a mild thermal annealing treatment after ligand exchange processing (referred to as “LE-TA”) triggered by guanidinium thiocyanate. The “LE-TA” method induces the formation of surface matrix on CsPbI 3 QDs, which is dominated by the cationic guanidinium (GA+) rather than the SCN-, maintaining the intact cubic structure and facilitating interparticle electrical interaction of QD solids. Consequently, the GA-matrix-confined CsPbI 3 QDs exhibit remarkably enhanced charge mobility and carrier diffusion length compared to control ones, leading to a champion power conversion efficiency of 15.21% when assembled in PVs, which is one of the highest among all Pe-QD solar cells. Additionally, the “LE-TA” method shows similar effects when applied to other Pe-QD PV systems like CsPbBr 3 and FAPbI 3 (FA = formamidinium), indicating its versatility in regulating the surfaces of various Pe-QDs. This work may afford new guidelines to construct electrically conductive and structurally intact Pe-QD solids for efficient optoelectronic devices.
36 MATERIALS SCIENCE↗
The N-terminal domain determines the affinity and specificity of H1 binding to chromatin
Highlights: Black-Right-Pointing-Pointer wt Human histone H1.4 and hH1.4 devoid of N-terminal domain, {Delta}N-hH1.4, were compared. Black-Right-Pointing-Pointer Both histones bind to chromatin, however, {Delta}N-hH1.4 displays lower binding affinity. Black-Right-Pointing-Pointer Interaction of {Delta}N-hH1.4 with chromatin includes a significant unspecific component. Black-Right-Pointing-Pointer N-terminal domain is a determinant of specificity of histone H1 binding to chromatin. -- Abstract: Linker histone H1, one of the most abundant nuclear proteins in multicellular eukaryotes, is a key component of the chromatin structure mainly due to its role in the formation and maintenance of the 30 nm chromatin fiber. It has a three-domain structure; a central globular domain flanked by a short N-terminal domain and a long, highly basic C-terminal domain. Previous studies have shown that the binding abilities of H1 are at large determined by the properties of the C-terminal domain; much less attention has been paid to role of the N-terminal domain. We have previously shown that H1 can be reconstituted via cytoplasmic mRNA injection in Xenopus oocytes, cells that lack somatic H1. The heterologously expressed H1 proteins are incorporated into in vivo assembled chromatin at specific sites and the binding event is monitored as an increase in nucleosomal repeat length (NRL). Using this setup we have here compared the binding properties of wt-H1.4 and hH1.4 devoid of its N-terminal domain ({Delta}N-hH1.4). The {Delta}N-hH1.4 displays a drastically lower affinity for chromatin binding as compared to the wild type hH1.4. Our data also indicates that {Delta}N-hH1.4 is more prone to unspecific chromatin binding than the wild type. We conclude that the N-terminal domain of H1 is an important determinant of affinity and specificity of H1-chromatin interactions.
60 APPLIED LIFE SCIENCES↗
Flexible all-carbon photovoltaics with improved thermal stability
The structurally robust nature of nanocarbon allotropes, e.g., semiconducting single-walled carbon nanotubes (SWCNTs) and C{sub 60}s, makes them tantalizing candidates for thermally stable and mechanically flexible photovoltaic applications. However, C{sub 60}s rapidly dissociate away from the basal of SWCNTs under thermal stimuli as a result of weak intermolecular forces that “lock up” the binary assemblies. Here, we explore use of graphene nanoribbons (GNRs) as geometrically tailored protecting layers to suppress the unwanted dissociation of C{sub 60}s. The underlying mechanisms are explained using a combination of molecular dynamics simulations and transition state theory, revealing the temperature dependent disassociation of C{sub 60}s from the SWCNT basal plane. Our strategy provides fundamental guidelines for integrating all-carbon based nano-p/n junctions with optimized structural and thermal stability. External quantum efficiency and output current–voltage characteristics are used to experimentally quantify the effectiveness of GNR membranes under high temperature annealing. Further, the resulting C{sub 60}:SWCNT:GNR ternary composites display excellent mechanical stability, even after iterative bending tests. - Graphical abstract: The incorporation of solvent resistant, mechanically flexible and electrically addressable 2-D soft graphene nanoribbons facilitates the assembly of photoconductive carbon nano-p/n junctions for thermally stable and flexible photovoltaic cells.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Ionomers for electrochemical energy conversion & storage technologies
We report ionomers, which are used as polymer electrolyte membranes as well as catalyst binders in membrane electrode assemblies, are a key component of electrochemical energy conversion and storage technologies such as fuel cells, electrolyzers, and flow batteries. The use of ionomers in these clean energy technologies has a long history and there has been considerable progress in developing low-cost, high-performance ionomers in recent years. In this review article, we discuss some highlights from recent developments of ionomers with emphasis on chemically stable, mechanically durable, high-performance hydrocarbon ionomers and their state-of-the-art performance in electrochemical energy conversion devices. Future directions of ionomer research that are important to enhance our understanding and the remaining challenges related to device level applications are addressed.
36 MATERIALS SCIENCE↗