Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Thermokinetics of point defects in α-Fe 2 O 3

Abstract Point defect formation and migration in oxides governs a wide range of phenomena from corrosion kinetics and radiation damage evolution to electronic properties. In this study, we examine the thermodynamics and kinetics of anion and cation point defects using density functional theory in hematite ( α -Fe 2 O 3 ), an important iron oxide highly relevant in both corrosion of steels and water-splitting applications. These calculations indicate that the migration barriers for point defects can vary significantly with charge state, particularly for cation interstitials. Additionally, we find multiple possible migration pathways for many of the point defects in this material, related to the low symmetry of the corundum crystal structure. The possible percolation paths are examined, using the barriers to determine the magnitude and anisotropy of long-range diffusion. Our findings suggest highly anisotropic mass transport in hematite, favoring diffusion along the c -axis of the crystal. In addition, we have considered the point defect formation energetics using the largest Fe 2 O 3 supercell reported to date.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Bioinspired stability enhancement in deuterium-substituted organic–inorganic hybrid perovskite solar cells

Abstract In hybrid perovskite solar cells (PSCs), the reaction of hydrogens (H) located in the amino group of the organic A-site cations with their neighboring halides plays a central role in degradation. Inspired by the retarded biological activities of cells in heavy water, we replaced the light H atom with its abundant, twice-as-heavy, nonradioactive isotope, deuterium (D) to hamper the motion of H. This D substitution retarded the formation kinetics of the detrimental H halides in Pb-based PSCs, as well as the H bond-mediated oxidation of Sn2+ in Sn–Pb-based narrow-bandgap PSCs, evidenced by accelerated stability studies. A computational study indicated that the zero point energy of D-based formamidinium (FA) is lower than that of pristine FA. In addition, the smaller increase in entropy in D-based FA than in pristine FA accounts for the increased formation free energy of the Sn2+ vacancies, which leads to the retarded oxidation kinetics of Sn2+. In this study, we show that substituting active H with D in organic cations is an effective way to enhance the stability of PSCs without sacrificing photovoltaic (PV) performance. This approach is also adaptable to other stabilizing methods.

14 SOLAR ENERGY↗
DOE OSTI2025

Relationship between atomic and electronic structure in Ln-bearing oxides

Metastable states of matter are of great interest as they offer the promise of novel functionality. They are often a natural consequence of exposure to nonequilibrium environments. In oxides, metastability can take the form of new polymorphs, chemical disorder, and even amorphization. While significant attention has been given to the impact those changes have on the atomic properties of the material, the corresponding changes in the electronic structure have received less attention. Here, using density functional theory, we consider how the electronic structure varies with potential metastable structures in two classes of lanthanide-bearing oxides—pyrochlores and interlanthanide sesquioxides. We find that the changes depend strongly on both the crystal structure and crystal chemistry of the compound with, for example, disordering and amorphization either increasing or decreasing the bandgap depending on the chemistry. For the 𝐴 2 ⁢𝐵 2 ⁢O 7 pyrochlores, we find different dependencies of the bandgap on the 𝐴 = 𝐿⁢𝑛 cations as the 𝐵 cation is changed, which we relate to the nature of the density of states at the conduction band minimum for different 𝐵 chemistries. Our calculations are validated by electron energy loss spectroscopy measurements for two pyrochlore compounds in which amorphization does reduce the bandgap, consistent with our calculations on these two compounds. In conclusion, our results highlight the relationship between atomic and electronic structure and how radiation can be used to modify and potentially control the electronic properties of oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetocapacitance effect and magnetoelectric coupling in type-II multiferroic HoFeWO 6

We have investigated the multiferroicity and magnetoelectric (ME) coupling in HoFeWO 6 . With a noncentrosymmetric polar structure (space group Pna2 1 ) at room temperature, this compound shows an onset of electric polarization with an antiferromagnetic ordering at the Néel temperature (T N ) of 17.8 K. The magnetic properties of the polycrystalline samples were studied by DC and AC magnetization and heat capacity measurements. The metamagnetic behavior at low temperatures was found to be directly related to the dielectric properties of the compound. In particular, field-dependent measurements of capacitance show a magnetocapacitance (MC) effect with double-hysteresis loop behavior in direct correspondence with the magnetization. Our x-ray diffraction results show the Pna2 1 structure down to 8 K and suggest the absence of a structural phase transition across T N . Soft x-ray absorption spectroscopy and soft x-ray magnetic circular dichroism (XMCD) measurements at the Fe L 2,3 and Ho M 4,5 edges revealed the oxidation state of Fe and Ho cations to be 3+. Fe L 2,3 XMCD further shows that Fe 3+ cations are antiferromagnetically ordered in a noncollinear fashion with spins arranged 90° with respect to each other. Our findings show that HoFeWO 6 is a type-II multiferroic exhibiting a MC effect. Furthermore, the observed MC effect and the change in polarization by the magnetic field, as well as their direct correspondence with magnetization, further support the strong ME coupling in this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Machine learning study of magnetism in uranium-based compounds

Actinide and lanthanide-based materials display exotic properties that originate from the presence of itinerant or localized f electrons and include unconventional superconductivity and magnetism, hidden order, and heavy-fermion behavior. Due to the strongly correlated nature of the 5f electrons, magnetic properties of these compounds depend sensitively on applied magnetic field and pressure, as well as on chemical doping. However, precise connection between the structure and magnetism in actinide-based materials is currently unclear. In this investigation, we established such structure-property links by assembling and mining two datasets that aggregate, respectively, the results of high-throughput density functional theory simulations and experimental measurements for the families of uranium- and neptunium-based binary compounds. Various regression algorithms were utilized to identify correlations among accessible attributes (features or descriptors) of the material systems and predict their cation magnetic moments and general forms of magnetic ordering. Descriptors representing compound structural parameters and cation f-subshell occupation numbers were identified as most important for accurate predictions. The best machine learning model developed employs the random forest regression algorithm. It can predict both spin and orbit moment size with root-mean-square error of 0.17 μ B and 0.19 μ B , respectively. Lastly, the random forest classification algorithm is used to predict the ordering (paramagnetic, ferromagnetic, and antiferromagnetic) of such systems with 76% accuracy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Antiphase boundary migration as a diffusion mechanism in a P3 sodium layered oxide

The electrode materials of Na-ion batteries must exhibit fast ion transport, a property that is often negatively impacted when mobile cations order. Many layered Na (and K) intercalation compounds adopt the P3 crystal structure, which tends to stabilize cation-vacancy orderings over a wide range of Na concentrations. The ordered phases have been predicted to consist of domains that are periodically separated by antiphase boundaries (APBs) to accommodate variations in Na concentration. The mechanisms and rates with which Na diffuses within such ordered phases of P3 are not understood. We have conducted a first-principles study of Na diffusion in the P3 structure, using Na x CoO 2 as a model system. We find that most simple nearest-neighbor hops in Na-vacancy ordered phases in P3 result in unstable configurations and are therefore forbidden. We identify an alternative mechanism of Na transport that is mediated by APB migration via the formation and expansion of kinks along domain boundaries. The limiting kinetic barriers for this mechanism are quite low (0.03 to 0.30 eV). Vacancy defects are not required, and furthermore have formation energies that are higher than those of the APB kink defects. Furthermore, our results suggest that APB migration is a fundamental diffusion mechanism in the P3 structure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Accuracy of DFT computed oxygen-vacancy formation energies and high-throughput search of solar thermochemical water-splitting compounds

The enthalpy change involved in metal oxide reduction is a key quantity in various processes related to energy conversion and storage, and is of particular interest for computational prediction. Often this prediction involves the simulation of a high temperature reduction process with a 0K methodology like density functional theory (DFT), and it is not infrequent for the high temperature and 0K stable crystal structures to differ. This introduces a conundrum with regards to the choice of crystal structure to utilize in the computation, with approaches in the literature varying and experimental validation remaining scarce. In this work we address both the crystal structure conundrum and the experimental validation, and then apply the insights we gain to guide a high-throughput search for new materials for solar thermochemical water-splitting applications. By computing the DFT+U oxygen vacancy formation energy (ΔE vf ) of a selection of ABO 3 compounds and comparing different crystal structures for each composition, we highlight the issues that arise when the structure utilized in the computation is dynamically unstable at 0K, namely the presence of an artificial lowering of ΔE vf , and the lack of convergence of ΔE vf with cell size. We solve these limitations by identifying and employing a suitable surrogate dynamically stable structure. We then validate the predictive power of our calculations against appositely generated experimental measurements of reduction enthalpy for a series of Hubbard U values, finding an accuracy ranging between 0.2-0.6 eV/O. In light of such conclusions, we revise and expand a previous a high-throughput DFT study on ABO 3 perovskite oxides. As a result, we provide a list of candidate STCH materials, highlight trends with redox-active cation and structural distortion, and identify Mn 4+ , Mn 3+ and Co 3+ as the most promising redox-active cations.

08 HYDROGEN↗
DOE OSTI2025

Structural and electronic changes in L⁢i 2 ⁢Ru⁢O 3 induced by lithium intercalation

Despite extensive research on oxide battery cathodes that transcend classical cationic redox activity, the detailed interplay between structural transformations and electronic redox processes remains insufficiently understood. We report a detailed study of the sequential structural and electronic changes in Li 2 RuO 3 upon lithium intercalation, characterized by powder x-ray and neutron diffraction alongside Ru and O K-edge x-ray absorption spectroscopy (XAS), and guided by operando synchrotron x-ray diffraction. During delithiation, Li 2 RuO 3 evolves from a well-defined monoclinic state to a complex trigonal phase via multiple intermediate structures, marked by significant changes in Ru-O bond distances that closely track the transition from a classical cationic redox to an unconventional process centered at oxygen states. Armed with high-quality atomic structural descriptions, computational models of the O K-edge XAS closely reproduce the experimentally observed spectral shifts. Lastly, we relate observations of electrochemical hysteresis with concurrent changes in the pathways of structural and electronic transitions. In conclusion, our results not only clarify the mechanisms underpinning voltage hysteresis in a model for lattice oxygen redox but also underscore the importance of structural fidelity in modeling redox behavior when this type of complex reactivity is present.

Li, Haifeng [Univ. of Illinois, Chicago, IL (Unite↗
DOE OSTI2020

Li 4 Ru 2 OCl 10 ·10H 2 O: crystal structure, magnetic properties and bonding interactions in ruthenium-oxo complexes

The results of the structural determination, magnetic characterization, and theoretical calculations of a new ruthenium-oxo complex, Li 4 [Ru 2 OCl 10 ]·10H 2 O, are presented. Single crystals were grown using solvent methods and the crystal structure was characterized by single crystal X-ray diffraction. Li 4 [Ru 2 OCl 10 ]·10H 2 O crystallizes into a low-symmetry triclinic structure ($P\bar1$) due to the much smaller Li + cation compared to K + cation in the tetragonal complex K 4 [Ru 2 OCl 10 ]·H 2 O. The X-ray photoelectron spectra confirm only the single valent Ru 4+ in Li 4 [Ru 2 OCl 10 ]·10H 2 O even though two distinct Ru sites exist in the crystal structure. Magnetic measurements reveal the diamagnetic property of Li 4 [Ru 2 OCl 10 ]·10H 2 O with unpaired electrons existing on Ru 4+ . Furthermore, the molecular orbital analysis matches well with the observed UV and magnetic measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Improved net carbon budgets in the US Midwest through direct measured impacts of enhanced weathering

Abstract Terrestrial enhanced weathering (EW) through the application of Mg‐ or Ca‐rich rock dust to soil is a negative emission technology with the potential to address impacts of climate change. The effectiveness of EW was tested over 4 years by spreading ground basalt (50 t ha −1 year −1 ) on maize/soybean and miscanthus cropping systems in the Midwest US. The major elements of the carbon budget were quantified through measurements of eddy covariance, soil carbon flux, and biomass. The movement of Mg and Ca to deep soil, released by weathering, balanced by a corresponding alkalinity flux, was used to measure the drawdown of CO 2 , where the release of cations from basalt was measured as the ratio of rare earth elements to base cations in the applied rock dust and in the surface soil. Basalt application stimulated peak biomass and net primary production in both cropping systems and caused a small but significant stimulation of soil respiration. Net ecosystem carbon balance (NECB) was strongly negative for maize/soybean (−199 to −453 g C m −2 year −1 ) indicating this system was losing carbon to the atmosphere. Average EW (102 g C m −2 year −1 ) offset carbon loss in the maize/soybean by 23%–42%. NECB of miscanthus was positive (63–129 g C m −2 year −1 ), indicating carbon gain in the system, and EW greatly increased inorganic carbon storage by an additional 234 g C m −2 year −1 . Our analysis indicates a co‐deployment of a perennial biofuel crop (miscanthus) with EW leads to major wins—increased harvested yields of 29%–42% with additional carbon dioxide removal (CDR) of 8.6 t CO 2 ha −1 year −1 . EW applied to maize/soybean drives a CDR of 3.7 t CO 2 ha −1 year −1 , which partially offsets well‐established carbon losses from soil from this crop rotation. EW applied in the US Midwest creates measurable improvements to the carbon budgets perennial bioenergy crops and conventional row crops.

enhanced weathering↗
DOE OSTI2021

Mycorrhizal associations of tree species influence soil nitrogen dynamics via effects on soil acid–base chemistry

Across all spatial scales, ECM-dominated forests were associated with greater soil acidity. In particular, ECM-dominated soils exhibited lower soil pH and base cations, although the magnitude of mycorrhizal-associated differences in soil acid–base chemistry depended on the biomes, with differences being more pronounced in temperate than in sub/tropical forests. Higher lignin and lower base cations in ECM tree leaf litter were related to greater soil acidity in ECM-dominated forests. Moreover, the lower inorganic N concentrations and slower N transformation rates in ECM-dominated forests were associated with their greater soil acidity. Our results indicate that the scale-invariant feedbacks between plant nutrient-use strategies and soil properties have the potential to impact forest community assembly and ecosystem processes, particularly in the context of global change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of Al:Si and (Al+Na):Si Ratios on the Properties of the International Simple Glass, Part II: Structure

High-alumina containing high-level waste (HLW) will be vitrified at the Waste Treatment Plant at the Hanford Site. The resulting glasses, high in alumina, will have distinct composition-structure-property (C-S-P) relationships compared to previously studied HLW glasses. These C-S-P relationships determine the processability and product durability of glasses and therefore must be understood. The main purpose of this study is to understand the detailed structural changes caused by Al:Si and (Al+Na):Si substitutions in a simplified nuclear waste model glass (ISG, International Simple Glass) by combining experimental structural characterizations and molecular dynamics (MD) simulations. The structures of these two series of glasses were characterized by neutron total scattering and 27Al, 23Na, 29Si, and 11B solid-state nuclear magnetic resonance (NMR) spectroscopy. Additionally, MD simulations were used to generate atomistic structural models of the borosilicate glasses and simulation results were validated by the experimental structural data. Short-range (e.g., bond distance, coordination number, etc.) and medium-range (e.g., oxygen speciation, network connectivity, polyhedral linkages) structural features of the borosilicate glasses were systematically investigated as a function of the degree of substitution. The results show that bond distance and coordination number of the cation-oxygen pairs are relatively insensitive to Al:Si and (Al+Na):Si substitutions with the exception of the B-O pair. Additionally, the Al:Si substitution results in an increase of tri-bridging oxygen species, while (Al+Na):Si substitution creates non-bridging oxygen species. Charge compensator preferences were found for Si-[NBO] (Na+), [3]B-[NBO] (Na+), [4]B (mostly Ca2+), [4]Al (nearly equally split Na+ and Ca2+), and [6]Zr (mostly Ca2+). The network former-BO-network former linkages preferences were also tabulated; Si-O-Al and Al-O-Al were preferred at the expense of lower Si-O-[3]B and [3]B-O-[3]B linkages. These results provide insights on the structural origins of property changes such as glass transition temperature caused by the substitutions, providing a basis for future improvements of theoretical and computer simulation models.

Lu, Xiaonan↗
DOE OSTI2021

Predicting the Dissolution Rate of Borosilicate Glasses using QSPR analysis based on molecular dynamics simulations

Quantitative Structure Property Relationship (QSPR) analysis based on molecular dynamics (MD) simulations is a promising approach for establishing the composition-property relationships of glass and other materials with complex structures. A series of 20 borosilicate and boroaluminosilicate glasses have been modeled by using MD simulations with recently developed effective potentials. Short- and medium-range structures of these glasses were analyzed and, based on these structural information, QSPR analysis of the initial dissolution rate (r0) was made and compared with measured r0 at 90°C and pH 9 using various structural descriptors such as percentage of bridging oxygen species, network connectivity and average ring size. The structural descriptors, Fnet, containing energetic information such as single bond strength and other structural information were also used. It was found that overall network connectivity, average ring size and Fnet give reasonable predictions of the r0 of studied glasses, given the conditions that the glasses are homogeneous and dissolve congruently. Modifying glass compositions to account preferential release of modifiers gives a better prediction for incongruently dissolving glasses. The results were compared with our recent work of predicting glass dissolution behavior from compositions using the topological-constraints-based models.

Du, Jincheng↗
DOE OSTI2022

The role of Co valence in charge transport in the entropy‐stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O

Abstract Many of the studies on the entropy‐stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O have been heavily application‐based. Previous works have studied effects of cation stoichiometry on the entropy‐driven reaction to form a single phase, but a fundamental exploration of the effects of anion stoichiometry and/or redox chemistry on electrical properties is lacking. Using near‐edge X‐ray absorption fine structure (NEXAFS) and electrical measurements, we show that oxidizing thin film samples of (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O affects primarily the valence of Co, leaving the other cations in this high‐entropy system unchanged. This oxidation increases electrical conduction in these thin films, which occurs via small polaron hopping mediated by the Co valence shift from 2+ to a mixed 2+/3+ state. In parallel, we show that bulk samples sintered in an oxygen‐rich atmosphere have a lower activation energy for electrical conduction than those equilibrated in a nitrogen (reducing) atmosphere. Combining feasible defect compensation scenarios with electrical impedance measurements and NEXAFS data, we propose a self‐consistent interpretation of Co redox‐mediated small polaron conduction as the dominant method of charge transfer in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effects of processing parameters on the morphologies of complex sesquioxide thin films

Controlling and predicting the morphology of lanthanide sesquioxides in thin film form is vital to their use in current applications. In the present study, single and codeposited Sm2O3, Er2O3, and Lu2O3 thin films were grown on yttria-stabilized zirconia (8%) substrates by radio frequency magnetron sputtering at room temperature and 500 °C. The effect of two different substrate temperatures and altering the oxide cation on the structural and morphological properties of the films was analyzed. The thin films were characterized by profilometry, scanning electron microscopy, transmission electron microscopy, and x-ray diffraction. The single-component Lu2O3 and Sm2O3 films obtained were of the cubic phase, and the Er2O3 was a mix of cubic and monoclinic phases. It was observed for both the Er2O3 and Lu2O3 films that increasing the substrate temperature to 500 °C resulted in larger grained polycrystalline films. In contrast, large grained polycrystalline films were obtained at both room temperature and 500 °C for Sm2O3 and uneven granularity increased as temperature increased. Codeposition of Lu2O3 and Sm2O3, and Lu2O3 and Er2O3 resulted in a cubic bixbyite phase (the C phase of the lanthanide sesquioxide) solid solution. It was observed that the structure and morphology of the films can be controlled by manipulating deposition parameters. Both substrate temperature and altering the oxide cation contributed to changes in crystallinity and grain structure, which can modify the chemical and physical properties of the films for their applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Holistic energy landscape management in 2D/3D heterojunction via molecular engineering for efficient perovskite solar cells

Constructing two-dimensional (2D) perovskite atop of 3D with energy landscape management is still a challenge in perovskite photovoltaics. Here, we report a strategy through designing a series of π-conjugated organic cations to construct stable 2D perovskites and to realize delicate energy level tunability at 2D/3D heterojunctions. As a result, the hole transfer energy barriers can be reduced both at heterojunctions and within 2D structures, and the preferable work function shift reduces charge accumulation at interface. Leveraging these insights and also benefitted from the superior interface contact between conjugated cations and poly(triarylamine) (PTAA) hole transporting layer, a solar cell with power conversion efficiency of 24.6% has been achieved, which is the highest among PTAA-based n-i-p devices to the best of our knowledge. The devices exhibit greatly enhanced stability and reproducibility. This approach is generic to several hole transporting materials, offering opportunities to realize high efficiency without using the unstable Spiro-OMeTAD.

14 SOLAR ENERGY↗
DOE OSTI2025

Contorted acene ribbons for stable and ultrasensitive neural probes

Organic materials that conduct both electrons and ions are integral to implantable bioelectronics because of their conformable nature. There is a dearth of these materials that are highly sensitive to cations, which are the majority ions on the surface of neurons. This manuscript offers a solution using an extended ribbon structure that is defect-free, providing high electronic mobility along its fused backbone, while the edge structure of these ribbons promotes high ionic conductivity. We incorporated these mixed ion/electron conductors into neural probes and implanted them in a rodent brain where they offer a suite of useful properties: high cation sensitivity, stability over several weeks after implantation, and biocompatibility. These materials represent an innovative class of implantable biosensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗