Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPATIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Probing sulphur clusters in a microfluidic electrochemical cell with synchrotron-based photoionization mass spectrometry

We present synchrotron-based mass spectrometry to probe products formed in the lithium sulphide electrolyte. In operando analysis was obtained at two different potentials in a vacuum compatible microfluidic electrochemical cell. Mass spectral observations show that the charged electrolyte formed sulfur clusters under dynamic conditions, demonstrating electrolyte electron shuttling.

sulphur cluster, lithium – sulphur battery electro↗

Scalable synthesis of nanoporous atomically thin graphene membranes for dialysis and molecular separations via facile isopropanol-assisted hot lamination

Scalable graphene synthesis and facile large-area membrane fabrication are imperative to advance nanoporous atomically thin membranes (NATMs) for molecular separations. Although chemical vapor deposition (CVD) allows for roll-to-roll high-quality monolayer graphene synthesis, facile transfer with atomically clean interfaces to porous supports for large-area NATM fabrication remains extremely challenging. Sacrificial polymer scaffolds commonly used for graphene transfer typically leave polymer residues detrimental to membrane performance and transfers without polymer scaffolds suffer from low yield resulting in high non-selective leakage through NATMs. In this study, we systematically study the factors influencing graphene NATM fabrication and report on a novel roll-to-roll manufacturing compatible isopropanol-assisted hot lamination (IHL) process that enables scalable, facile and clean transfer of CVD graphene on to polycarbonate track etched (PCTE) supports with coverage ≥99.2%, while preserving support integrity/porosity. We demonstrate fully functional centimeter-scale graphene NATMs that show record high permeances (~2–3 orders of magnitude higher) and better selectivity than commercially available state-of-the-art polymeric dialysis membranes, specifically in the 0–1000 Da range. Our work highlights a scalable approach to fabricate graphene NATMs for practical applications and is fully compatible with roll-to-roll manufacturing processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Predicting the chemical reactivity of organic materials using a machine-learning approach

Stability and compatibility between chemical components are essential parameters that need to be considered in the selection of functional materials in configuring a system. In configuring devices such as batteries or solar cells, not only the functionality of individual constituting materials such as electrodes or electrolyte but also an appropriate combination of materials which do not undergo unwanted side reactions is critical in ensuring their reliable performance in long-term operation. While the universal theory that can predict the general chemical reactivity between materials is long awaited and has been the subject of studies with a rich history, traditional ways proposed to date have been mostly based on simple electronic properties of materials such as electronegativity, ionization energy, electron affinity and hardness/softness, and could be applied to only a small group of materials. Moreover, prediction has often been far from accurate and has failed to offer general implications; thus it was practically inadequate as a selection criterion from a large material database, i.e. data-driven material discovery. Herein, we propose a new model for predicting the general reactivity and chemical compatibility among a large number of organic materials, realized by a machine-learning approach. As a showcase, we demonstrate that our new implemented model successfully reproduces previous experimental results reported on side-reactions occurring in lithium–oxygen electrochemical cells. Furthermore, the mapping of chemical stability among more than 90 available electrolyte solvents and the representative redox mediators is realized by this approach, presenting an important guideline in the development of stable electrolyte/redox mediator couples for lithium–oxygen batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of the 6s 2 configuration of Bi 3+ on the structures of A′BiNb 2 O 7 (A′ = Rb, Na, Li) layered perovskite oxides

Solid state compounds which exhibit non-centrosymmetric crystal structures are of great interest due to the physical properties they can exhibit. Here, the ‘hybrid improper’ mechanism – in which two non-polar distortion modes couple to, and stabilize, a further polar distortion mode, yielding an acentric crystal structure – offers opportunities to prepare a range of novel non-centrosymmetric solids, but examples of compounds exhibiting acentric crystal structures stabilized by this mechanism are still relatively rare. Here we describe a series of bismuth-containing layered perovskite oxide phases, RbBiNb 2 O 7 , LiBiNb 2 O 7 and NaBiNb 2 O 7 , which have structural frameworks compatible with hybrid-improper ferroelectricity, but also contain Bi 3+ cations which are often observed to stabilize acentric crystal structures due to their 6s 2 electronic configurations. Neutron powder diffraction analysis reveals that RbBiNb 2 O 7 and LiBiNb 2 O 7 adopt polar crystal structures (space groups I2cm and B2cm respectively), compatible with stabilization by a trilinear coupling of non-polar and polar modes. The Bi 3+ cations present are observed to enhance the magnitude of the polar distortions of these phases, but are not the primary driver for the acentric structure, as evidenced by the observation that replacing the Bi 3+ cations with Nd 3+ cations does not change the structural symmetry of the compounds. In contrast the non-centrosymmetric, but non-polar structure of NaBiNb 2 O 7 (space group P2 1 2 1 2 1 ) differs significantly from the centrosymmetric structure of NaNdNb 2 O 7 , which is attributed to a second-order Jahn-Teller distortion associated with the presence of the Bi3+ cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of wafer scale MoS 2 atomic layers grown by metal–organic chemical vapor deposition using organo-metal, organo-sulfide, and H 2 S precursors

Transition Metal Dichalcogenides (TMDs) are a unique class of materials that exhibit attractive electrical and optical properties which have generated significant interest for applications in microelectronics, optoelectronics, energy storage, and sensing. Considering the potential of these materials to impact such applications, it is crucial to develop a reliable and scalable synthesis process that is compatible with modern industrial manufacturing methods. Metal–organic chemical vapor deposition (MOCVD) offers an ideal solution to produce TMDs, due to its compatibility with large-scale production, precise layer control, and high material purity. Optimization of MOCVD protocols is necessary for effective TMD synthesis and integration into mainstream technologies. Additionally, improvements in metrology are necessary to measure the quality of the fabricated samples more accurately. In this work, we study MOCVD of wafer-scale molybdenum disulfide (MoS 2 ) utilizing two common chalcogen precursors, H 2 S and DTBS. We then develop a metrology platform for wafer scale samples quality assessment. For this, the coalesced films were characterized using Raman spectroscopy, atomic force microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Kelvin probe force microscopy. We then correlate the structural analysis of these grown films with electrical performance by using aerosol jet printing to fabricate van der Pauw test structures and assess sheet resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent selection for a biomass-to-bioproduct pipeline through integrated reductive catalytic fractionation and microbial funneling

The growing significance of lignin-first biorefineries, which focus on upgrading the aromatics resulting from lignin depolymerization, presents opportunities for bioproduct synthesis using microbial strains capable of funneling a diverse array of phenolics into a single commodity chemical. In this study, we evaluated a biomass-to-bioproduct pipeline involving the reductive catalytic fractionation (RCF) of poplar biomass followed by biological funneling with a Novosphingobium aromaticivorans strain that produces 2-pyrone-4,6-dicarboxylic acid (PDC), a potential bioplastic precursor. Considering the impact of solvent on RCF reactor operating pressure, and the potential inhibitory effects of solvent on downstream microbial funneling, we performed an analysis of six pure solvents, namely methanol, ethanol, isopropanol, isobutanol, 1,4-dioxane and ethylene glycol, and different variations of their aqueous mixtures comprising 5 to 50 vol% water. For each pure solvent and solvent/water system, we measured phenolic monomer yields in the RCF process and PDC yields from the phenolic monomers. We then developed correlation models that relate phenolic monomer yields from RCF-derived samples to Hansen solubility parameters to determine solvent descriptors that contribute to high yields. Furthermore, we developed an integrated biorefinery system to estimate the minimum selling price (MSP) of PDC and the associated carbon footprint to identify solvent systems with better costs and sustainability metrics. These analyses resulted in the 50 vol% methanol/water system being identified as optimal because it reduces RCF reactor pressure and is compatible with microbial funneling with N. aromaticivorans. This solvent system produced 63 g PDC per kg biomass (264 g PDC per kg lignin) from 85 g phenolic monomers per kg biomass at a reduced reactor pressure of 48 bar (reduced by 26% compared to our previous poplar-to-PDC pipeline). The MSP for this system is $\$$13.98 per kg of purified PDC (carbon footprint of 1.47 kg CO 2 e per kg), which is about 24% lower than a previously described poplar-to-PDC pipeline and 46% lower than a lignin-to-PDC pipeline that used pure methanol as the solvent. The results from this study illustrate improvements that can be made in lignocellulosic biorefineries that are compatible with the hybrid chemical and biological processes needed to gain value from lignin.

Sripada, Sarada [Great Lakes Bioenergy Research Ce↗

Engineering modular enzyme assembly: synthetic interface strategies for natural products biosynthesis applications

Covering: 2020 to 2025Natural products remain indispensable sources of therapeutic and bioactive compounds, yet traditional discovery strategies are constrained by compound rediscovery. Modular biosynthetic enzymes, such as type I polyketide synthases (PKSs) and type A non-ribosomal peptide synthetases (NRPSs), offer promising platforms for combinatorial biosynthesis owing to their programmable architectures. However, practical implementation is frequently limited by inter-modular incompatibility and domain-specific interactions. This review highlights recent advances in modular enzyme assembly enabled by synthetic interfaces-including cognate docking domains, synthetic coiled-coils, SpyTag/SpyCatcher, and split inteins-which function as orthogonal, standardized connectors to facilitate post-translational complex formation. These interfaces support rational investigations into substrate specificity, module compatibility, and pathway derivatization as well as general enzyme clustering applications beyond PKS and NRPS systems. Synthetic interfaces can be integrated with computational tools to support a more systematic and scalable framework for modular enzyme engineering by providing predictive insights into domain compatibility and interface design. These approaches within iterative design-build-test-learn workflows can accelerate the programmable assembly of biosynthetic systems and expand the accessible chemical space for natural products.

Kim, Gahyeon↗

Structural incorporation into goethite fractionates rare earth elements

Up to 20% of rare earth elements (REEs) in ion adsorption deposits (IADs) are associated with iron oxide minerals, primarily goethite. Often termed “non-extractable”, goethite-hosted REEs are thought to be structurally incorporated into the mineral lattice. The large mismatch in size and charge density between REEs (ionic radius, r = 0.86–1.03 Å) and Fe 3+ (r = 0.65 Å), however, makes direct substitution energetically unfavorable. To determine REE compatibility with and incorporation into goethite on the atomic level, we used X-ray pair distribution function analysis (PDF) and LIII-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The compatibility of REEs with goethite and the precursor ferrihydrite (FH) is Lu ≥ Yb ≫ Dy > Nd for both phases. Nd and Dy primarily form secondary amorphous phases, with <30% Nd and Dy incorporated into goethite. In the FH precursor at pH 6.8, Yb and Lu assumed a local REE-OOH like structure with next nearest neighbor Fe. The Yb, Lu, and Nd-FH samples were also matured at ambient conditions for 100 days; despite the presence of only ∼5% goethite, Lu and Yb were 42% and 100% in goethite-like structural environments, respectively, whereas the PDF and EXAFS of Nd showed little evidence of any incorporation. Using ab initio molecular dynamics (AIMD) to model the EXAFS, we determined the presence of protonated Fe vacancies, edge-sharing with structural Lu and Yb, likely helped accommodate these REEs in the goethite structure. Incorporation into Fe oxyhydroxides thus potentially fractionates the REEs during weathering associated with formation of lateritic and ion adsorption deposits.

Mergelsberg, Sebastian T. [Pacific Northwest Natio↗

Interoperability study of fast wireless charging and normal wireless charging of electric vehicles with a shared receiver

Fast charging of electric vehicles (EVs) has been the trend recently. For conductive charging, normal charging can be realised by an on‐board charger, while fast charging can be realised by a DC charger which is usually off‐board the vehicle. However, for wireless charging, there is a need of a transmitter on the ground and a receiver on the EV side. Therefore, there will be a high‐power receiver and a low‐power receiver in one EV to achieve dual charging capabilities. To reduce the EV‐side cost, weight, and volume, this paper proposes a wireless charging system with a shared receiver compatible of fast wireless charging (FWC) at a small air gap and normal wireless charging (NWC) at a large air gap. The relationship between the coil size and the power level is investigated and a suitable receiver coil size is selected for FWC. The LCC‐LCC topology is selected due to its characteristic of output power proportional to the coupling coefficient. Design procedures of the receiver and transmitters are investigated. The simulations and the experimental results obtained from the downscaled prototype verified the effectiveness of the compatibility design.

Zhang, Yiming↗

Planck intermediate results. XXI. Comparison of polarized thermal emission from Galactic dust at 353 GHz with interstellar polarization in the visible

The Planck survey provides unprecedented full-sky coverage of the submillimetre polarized emission from Galactic dust. In addition to the information on the direction of the Galactic magnetic field, this also brings new constraints on the properties of dust. The dust grains that emit the radiation seen by Planck in the submillimetre also extinguish and polarize starlight in the visible. Comparison of the polarization of the emission and of the interstellar polarization on selected lines of sight probed by stars provides unique new diagnostics of the emission and light scattering properties of dust, and therefore of the important dust model parameters, composition, size, and shape. Using ancillary catalogues of interstellar polarization and extinction of starlight, we obtain the degree of polarization, p V , and the optical depth in the V band to the star, τ V . Toward these stars we measure the submillimetre polarized intensity, P S , and total intensity, I S , in the Planck 353 GHz channel. We compare the column density measure in the visible, E ( B - V ), with that inferred from the Planck product map of the submillimetre dust optical depth and compare the polarization direction (position angle) in the visible with that in the submillimetre. For those lines of sight through the diffuse interstellar medium with comparable values of the estimated column density and polarization directions close to orthogonal, we correlate properties in the submillimetre and visible to find two ratios, R S/V = ( P S /I S )/( p V /τ V ) and R P/p = P S / p V , the latter focusing directly on the polarization properties of the aligned grain population alone. We find R S/V = 4.2, with statistical and systematic uncertainties 0.2 and 0.3, respectively, and R P/p = 5.4 MJy sr -1 , with uncertainties 0.2 and 0.3 MJy sr -1 , respectively. Our estimate of R S/V is compatible with predictions based on a range of polarizing dust models that have been developed for the diffuse interstellar medium. This estimate provides new empirical validation of many of the common underlying assumptions of the models, but is not yet very discriminating among them. However, our estimate of R P/p is not compatible with predictions, which are too low by a factor of about 2.5. This more discriminating diagnostic, R P/p , indicates that changes to the optical properties in the models of the aligned grain population are required. These new diagnostics, together with the spectral dependence in the submillimetre from Planck , will be important for constraining and understanding the full complexity of the grain models, and for interpreting the Planck thermal dust polarization and refinement of the separation of this contamination of the cosmic microwave background.

79 ASTRONOMY AND ASTROPHYSICS↗

The cosmic DANCe of Perseus

Context. Star-forming regions are excellent benchmarks for testing and validating theories of star formation and stellar evolution. The Perseus star-forming region, being one of the youngest (< 10 Myr), closest (280-320 pc), and most studied in the literature, is a fundamental benchmark. Aims. We aim to study the membership, phase-space structure, mass, and energy (kinetic plus potential) distribution of the Perseus star-forming region using public catalogues (Gaia, APOGEE, 2MASS, and Pan-STARRS). Methods. We used Bayesian methodologies that account for extinction to identify the Perseus physical groups in the phase-space, retrieve their candidate members, derive their properties (age, mass, 3D positions, 3D velocities, and energy), and attempt to reconstruct their origin. Results. We identify 1052 candidate members in seven physical groups (one of them new) with ages between 3 and 10 Myr, dynamical super-virial states, and large fractions of energetically unbounded stars. Their mass distributions are broadly compatible with that of Chabrier for masses ≳0.1 M ⊙ and do not show hints of over-abundance of low-mass stars in NGC 1333 with respect to IC 348. These groups’ ages, spatial structure, and kinematics are compatible with at least three generations of stars. Future work is still needed to clarify if the formation of the youngest was triggered by the oldest. Conclusions. The exquisite Gaia data complemented with public archives and mined with comprehensive Bayesian methodologies allow us to identify 31% more members than previous studies, discover a new physical group (Gorgophone: 7 Myr, 191 members, and 145 M ⊙ ), and confirm that the spatial, kinematic, and energy distributions of these groups support the hierarchical star formation scenario.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

WLCG Authorisation from X.509 to Tokens

The WLCG Authorisation Working Group was formed in July 2017 with the objective to understand and meet the needs of a future-looking Authentication and Authorisation Infrastructure (AAI) for WLCG experiments. Much has changed since the early 2000s when X.509 certificates presented the most suitable choice for authorisation within the grid; progress in token based authorisation and identity federation has provided an interesting alternative with notable advantages in usability and compatibility with external (commercial) partners. The need for interoperability in this new model is paramount as infrastructures and research communities become increasingly interdependent. Over the past two years, the working group has made significant steps towards identifying a system to meet the technical needs highlighted by the community during staged requirements gathering activities. Enhancement work has been possible thanks to externally funded projects, allowing existing AAI solutions to be adapted to our needs. A cornerstone of the infrastructure is the reliance on a common token schema in line with evolving standards and best practices, allowing for maximum compatibility and easy cooperation with peer infrastructures and services. We present the work of the group and an analysis of the anticipated changes in authorisation model by moving from X.509 to token based authorisation. A concrete example of token integration in Rucio is presented.

Bockelman, Brian↗

Thermodynamic Properties of Aggregate Coated by Different Types of Waste Plastic: Adhesion and Moisture Resistance of Asphalt-Aggregate Systems

The utilization of acidic aggregates in hot-mix asphalt (HMA) is often inevitable due to the limited supply of locally available aggregates, posing a potential threat of moisture damage to asphalt pavements. In this regard, the use of urban waste plastic to coat the low-quality aggregates is a promising way to improve the moisture resistance. This study fundamentally evaluated the compatibility between asphalt and plastic-coated aggregate by measuring surface energy, and for the first time compared the effects of different types of waste plastic including high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene terephthalate (PET), polyvinyl chloride (PVC), and polypropylene (PP). The plastic-coating significantly altered the chemistry of aggregate surface by increasing the nonpolar components and reducing the polar components. Such changes remarkably increased the dry adhesion energy between asphalt and aggregate and enhanced the wettability of aggregate. For the acidic aggregates, the polymeric treatment could decrease the value of wet adhesive, which indicated the debonding tendency in the presence of water was reduced. Finally, the energy ratios of the asphalt-aggregate combinations significantly increased by the surface pretreatment, which proved the effect of waste plastic coating on improving the moisture damage resistance of asphalt mixtures. By comparison, the HDPE coating was the most effective way to enhance the compatibility with asphalt, followed by PP and LDPE coatings. The PVC and PET coatings were investigated as the least effective way. In conclusion, this study cannot only contribute to the potential large-scale utilization of waste plastic but also remove the obstacles of using large quantities of acidic natural aggregate in asphalt pavements.

36 MATERIALS SCIENCE↗

Odd scalar curvature in field-antifield formalism

We consider the possibility of adding a Grassmann-odd function {nu} to the odd Laplacian. Requiring the total {delta} operator to be nilpotent leads to a differential condition for {nu}, which is integrable. It turns out that the odd function {nu} is not an independent geometric object but is instead completely specified by the antisymplectic structure E and the density {rho}. The main impact of introducing the {nu} term is that it makes compatibility relations between E and {rho} obsolete. We give a geometric interpretation of {nu} as (minus (1/8) times) the odd scalar curvature of an arbitrary antisymplectic, torsion-free, and {rho}-compatible connection. We show that the total {delta} operator is a {rho}-dressed version of Khudaverdian's {delta}{sub E} operator, which takes semidensities to semidensities. We also show that the construction generalizes to the situation where {rho} is replaced by a nonflat line bundle connection F. This generalization is implemented by breaking the nilpotency of {delta} with an arbitrary Grassmann-even second-order operator source.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Statistical linearization based estimation of the peak response of nonlinear systems subject to the EC8 design spectrum

A stochastic approach is proposed to obtain reliable estimates of the peak response of nonlinear systems to excitations specified via a response/design seismic spectrum. This is achieved without resorting to numerical integration of the governing nonlinear equations of motion. First, a numerical scheme is utilized to derive a power spectrum which is compatible in a stochastic sense to a given elastic design spectrum. This spectrum is then treated as the excitation spectrum in the context of the statistical linearization method to determine effective parameters, damping and stiffness, corresponding to an equivalent linear system (ELS). The obtained parameters are used in conjunction with the linear design spectrum, for various values of damping, to estimate the response of certain nonlinear systems. The case of single-degree-of-freedom systems with cubic stiffness nonlinearity and hysteretic systems whose restoring force traces a bilinear law are considered in conjunction with the elastic design spectrum prescribed by the European aseismic code provisions (EC8). Monte Carlo simulations pertaining to an ensemble of non-stationary EC 8 design spectrum compatible accelerograms are conducted to confirm that the average peak response of the nonlinear systems compare reasonably well with that of the ELS. This is true, even in cases where the response of the nonlinear oscillators deviates significantly from the linear one. In this manner, the proposed approach yields ELS which can reliably replace the original nonlinear systems in carrying out computationally efficient analyses in the initial stages of the aseismic design of structures under severe seismic excitations. Furthermore, the potential of this approach for developing inelastic design spectra from a given elastic design spectrum is established.

58 GEOSCIENCES↗

Effectiveness of Silicon as a Laser Sshinethrough Barrier for 351-nm Light

Many laser beams directly illuminate a spherical target in direct-drive inertial confinement fusion experiments, ionizing the outer surface and surrounding the target with a plasma containing an opaque critical surface. In the earliest stages of irradiation, before the plasma forms a critical-density surface, laser light can penetrate into the target. This “shinethrough” light can be sufficiently intense to undergo filamentation and damage the inside of the target, thereby seeding hydrodynamic instabilities. Laser shinethrough can be blocked by a thin coating of opaque material, such as, aluminum (Al). For cryogenic direct-drive targets, the shinethrough barrier material must also be compatible with cryogenic target fabrication procedures, which rules out Al layers since they would interfere with permeation filling and optical characterization of cryogenic targets. Silicon (Si) has been found to be a promising candidate for a direct-drive cryogenic target shinethrough barrier material. Several cryogenic targets have been coated with Si, successfully permeation filled with either deuterium (D2) or deuterium-tritium (DT), and subsequently layered and optically characterized. Various thicknesses of Si coatings have been applied to planar targets and tested under relevant irradiation conditions. Experiments have shown that 200 Å of Si is sufficient to protect targets from laser shinethrough.

Edgell, D H↗

ClusterBoron Implant Alternative to BF{sub 2} PMOS SDE

As device geometries scale, the formation of the SDE becomes increasingly difficult and increasingly important. For advanced technologies, new methods such as ultra-low-energy boron implantation and millisecond annealing (flash or laser) are necessary to achieve the required junction characteristics. In addition, these processes must be compatible with the remainder of the process flow, which might include advanced dielectrics, stress technologies, SOI, etc. The emergence of ClusterBoron as a high productivity alternative for the low energy implant creates interest in device performance possible in a realistic process flow. This paper will present an evaluation of the use of ClusterBoron for the PMOS SDE in an advanced 65 nm logic process which includes laser annealing, e-SiGe stress layers and SOI. The conventional process uses a BF2 SDE process. Complete device characteristics will be shown comparing the ClusterBoron SDE to the conventional BF2. It will be shown that the ClusterBoron process achieves better boron activation, leading to enhanced transistor drive current. It will also be shown that the ClusterBoron is compatible with the SiGe stress layers and SOI structure. In summary, ClusterBoron presents an attractive alternative to the conventional BF2 process for advanced PMOS SDE.

36 MATERIALS SCIENCE↗

The Development and Evolution of Ion Implanters in the Semiconductor Industry

By the end of the 1960's, the development of ion beam systems for isotope separation and materials research had reached the stage at which knowledge bases in the areas of ion beam formation and transport and the physics of atomic collisions in solids made it practical to consider the use of ion implantation as a means of modifying the near surface properties of solid materials. The beam currents and energies available made the technique particularly compatible with the doping requirements of the silicon devices being produced at that time. However, incorporation of the technique into a high volume manufacturing environment required the immediate development of new target handling facilities and improvements in machine reliability. While the manner in which ion implanters have evolved over the past forty years has continued to be dictated by the changing demands of the silicon processing industry, the dramatic reduction in transistor size and the increase in integrated circuit complexity have had significant implications for the qualities of the ion beams themselves, particularly in high current, ultra-low energy applications. Since the first commercial implanters were introduced, highly developed medium current, high current and high energy machines have evolved. In the medium current and high energy sectors, well understood ion optical principles have enabled ingenious and highly effective beam formation and transport systems to be designed. As these machines evolved, extensive studies of the implanted material using ion beam based techniques such as Rutherford backscattering and channelling provided a growing understanding of the fundamental radiation damage and annealing processes that are inevitably associated with the implantation process. For high current machines, particularly those operating in the so-called eV implantation range, beam formation and transport processes become considerably more complex and established ion optical design principles must be combined with detailed considerations of the roles of emittance, space charge and beam plasma characteristics if beams compatible with production worthy ultra-shallow junction formation are to be obtained. For these shallow, high dose implants, the proximity of the surface has a significant effect on the radiation damage build-up and annealing processes. To develop an understanding of the physics of some aspects of these processes, high depth resolution analytical techniques such as medium energy ion scattering have been applied. In the present review, the process based evolution of ion implantation equipment is discussed alongside a consideration of the contribution made by the growth in understanding of the physics of both the beams themselves and the ion collection and radiation damage processes occurring in the implanted silicon.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗