Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLOR MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Preface and Summary

Primary Physics with Secondary Beams of K L 's Not all of physics can be explored by primary beams of electrons and protons, however much these have taught us over the past 60 years. Electron-positron colliders give access to restricted sets of quantum numbers. From proton-proton collisions we have long learned about all manner of high energy reactions. However, access to excited mesons and baryons has been most universally achieved with pion and kaon secondary beams, and latterly pho-ton beams both virtual and real. Nowadays the wealth of information on polarized photon beams on polarized targets has totally revolutionized baryon spectroscopy, especially in the lightest flavor sector. The measurement of polarization asymmetries has constrained partial wave analyses far beyond anything conceivable with pion beams. Nevertheless, these only give access to the product of photocouplings of each excited baryon and its coupling to the hadron final state, such as πN , ππN , ηN , etc. Contemporaneously, in the meson sector, the COMPASS experiment with pion beams on protons at 190 GeV/c, together with heavy flavor decays in e + e - annihilation, have given access to multi-meson final states, like 2π, 3π, with greater precision than ever before. This has given hints and suggestions of new resonances, like the a 1 (1420). To understand the constituent structure of hadrons requires information on the relationship of each meson and baryon to those with different flavors, but the same J P quantum numbers. At its simplest, this is to understand the quark model multiplet structure, where this is appropriate. What is more, so ubiquitous are ππ, πK, KK, ηπ, ηK, ... final states as the decay products of almost every hadron, that knowledge of the properties of these is critical to every analysis. Unitarity colors and shapes the universality of such final state interactions in each set of quantum numbers. This means that however precise our measurements of γN → πη () N , with GlueX for instance, we cannot really determine the fine resonant structure of such a process without some information on πη and πη scattering too. Nor can we determine any flavor partners without information on the corresponding Kη () channels. For that secondary kaon beams are essential. While J-PARC has a whole program of charged strange particle and hypernuclear reactions, photon beams allow unique access to other channels. It was realized long ago that intense photon beams like that about to be delivered to Hall D at JLab, could produce secondary beams. The charged particles can readily be bent away, leaving a neutral particle beam dominated by K L : long lived kaons being produced far more copiously than neutrons above 3–4 GeV momentum. Such a facility provides access to a whole range of physics that is the subject of this meeting. The reactions that can be studied cover the meson spectrum and dynamics, the baryon spectrum and dynamics, and final state interactions that link mesons and baryons together. This includes particularly the channels Kπ, Kη, Kη in the meson sector. These explore the very limitations of chiral dynamics: the strange quark's current mass is 30-50 times that of the

42 ENGINEERING↗

Robust measurement of microbial reduction of graphene oxide nanoparticles using image analysis

ABSTRACT Shewanella oneidensis ( S. oneidensis ) has the capacity to reduce electron acceptors within a medium and is thus used frequently in microbial fuel generation, pollutant breakdown, and nanoparticle fabrication. Microbial fuel setups, however, often require costly or labor-intensive components, thus making optimization of their performance onerous. For rapid optimization of setup conditions, a model reduction assay can be employed to allow simultaneous, large-scale experiments at lower cost and effort. Since S. oneidensis uses different extracellular electron transfer pathways depending on the electron acceptor, it is essential to use a reduction assay that mirrors the pathways employed in the microbial fuel system. For microbial fuel setups that use nanoparticles to stimulate electron transfer, reduction of graphene oxide provides a more accurate model than other commonly used assays as it is a bulk material that forms flocculates in solutions with a large ionic component. However, graphene oxide flocculates can interfere with traditional absorbance-based measurement techniques. This study introduces a novel image analysis method for quantifying graphene oxide reduction, showing improved performance and statistical accuracy over traditional methods. A comparative analysis shows that the image analysis method produces smaller errors between replicates and reveals more statistically significant differences between samples than traditional plate reader measurements under conditions causing graphene oxide flocculation. Image analysis can also detect reduction activity at earlier time points due to its use of larger solution volumes, enhancing color detection. These improvements in accuracy make image analysis a promising method for optimizing microbial fuel cells that use nanoparticles or bulk substrates. IMPORTANCE Shewanella oneidensis ( S. oneidensis ) is widely used in reduction processes such as microbial fuel generation due to its capacity to reduce electron acceptors. Often, these setups are labor-intensive to operate and require days to produce results, so use of a model assay would reduce the time and expenses needed for optimization. Our research developed a novel digital analysis method for analysis of graphene oxide flocculates that may be utilized as a model assay for reduction platforms featuring nanoparticles. Use of this model reduction assay will enable rapid optimization and drive improvements in the microbial fuel generation sector.

Bennett, Danielle T. (ORCID:0009000188748827)↗

(abstract) Venus Gravity Field

A global gravity field model of Venus to degree and order 75 (5772 spherical harmonic coefficients) has been estimated from Doppler radio tracking of the orbiting spacecraft Pioneer Venus Orbiter (1979-1992) and Magellan (1990-1994). After the successful aerobraking of Magellan, a near circular polar orbit was attained and relatively uniform gravity field resolution (approximately 200 km) was obtained with formal uncertainties of a few milligals. Detailed gravity for several highland features are displayed as gravity contours overlaying colored topography. The positive correlation of typography with gravity is very high being unlike that of the Earth, Moon, and Mars. The amplitudes are Earth-like, but have significantly different gravity-topography ratios for different features. Global gravity, geoid, and isostatic anomaly maps as well as the admittance function are displayed.

Venus gravity field model gravity-topography ratio↗

Preliminary Characterization Results from the DebriSat Project

The DebriSat project is a continuing effort sponsored by NASA and DoD to update existing break-up models using data obtained from two separate hypervelocity impact tests used to simulate on-orbit collisions. To protect the fragments resulting from the impact tests, "soft-catch" arenas made of polyurethane foam panels were utilized. After each impact test, the test chamber was cleaned and debris resulting from the catastrophic demise of the test article were collected and shipped to the University of Florida for post-impact processing. The post-impact processing activities include collecting, characterizing, and cataloging of the fragments. Since the impact tests, a team of students has been working to characterize the fragments in terms of their mass, size, shape, color and material content. The focus of the 20 months since the impact tests has been on the collection of 2 millimeters- and larger fragments resulting from impact test on the 56 kilogram-representative LEO (Low Earth Orbit) satellite referred to as DebriSat. To date we have recovered in excess of 115,000 fragments, 30,000 more than the prediction of 85,000 fragments from the existing model. We continue to collect fragments but have transitioned to the characterization phase of the post-impact activities. Since the start of the characterization phase, the focus has been to utilize automation to (i) expedite fragment characterization process and (ii) minimize human-in-the- loop. We have developed and implemented such automated processes; e.g., we have automated the data entry process to reduce operator errors during transcription of the measurement data. However, at all steps of the process, there is human oversight to ensure the integrity of the data. Additionally, we have developed and implemented repeatability and reproducibility tests to ensure that the instrumentation used in the characterization process is accurate and properly calibrated. In this paper, the implemented processes are described and preliminary results presented. Additionally, lessons learned from the implemented automations and their impacts on the integrity of the results are discussed.

Rivero, M.↗

Double-copy towards supergravity inflation with α-attractor models

A bstract Key to the simplicity of supergravity α -attractor models of inflation are Volkov-Akulov fermions, often in the form of nilpotent superfields. Here we explore the possibility of using the double-copy to construct theories of Dirac-Born-Infeld-Volkov-Akulov (DBIVA) coupled to supergravity. A color-dual bootstrap admits scattering amplitudes involving pions and vectors through five-point tree-level order by order in mass-dimension, but requires the introduction of a Tr( F 3 ) operator. Gauge theories with this operator were recently found to require a tower of higher-derivative operators to be compatible with the duality between color and kinematics. Adjoint-type double-copy construction at its most conservative seems to require the UV completion of DBIVA + pure Poincaré supergravity scattering amplitudes to a family of theories involving DBIVA-like particles coupled to Weyl-Einstein supergravity. We also point out an alternative solution to color-dual gauged pions that allows adjoint double-copy without a tower of higher derivative corrections but at the cost of exchange symmetry between scalars.

Physics↗

Asymptotic gauge symmetry and UV extension of the nonperturbative coupling in holographic QCD

We extend our recent analytic study of the strong coupling 𝛼 eff in the nonperturbative and near-perturbative regimes [Phys. Rev. Lett. 133, 181901 (2024)] by imposing rigorous renormalization-group constraints from asymptotically free gauge theories at 𝑄 2 → ∞. The asymptotic boundary conditions modify the scaling properties of 𝛼eff at large values of the momentum transfer 𝑄 2 and lead to a scale-dependent confinement strength 𝜅⁡(𝑄 2 ). This requires that both 𝜅⁡(𝑄 2 ) and 𝛼 eff⁡ (𝑄 2 , 𝜅⁡(𝑄 2 )) remain holomorphic in the complex 𝑄 2 plane, except at the physical cuts associated with the heavy-quark thresholds and the singularity flow trajectory studied in our previous Letter. For color SU(3), a precise connection is found between the scaling exponent of 𝜅⁡(𝑄 2 ) in the ultraviolet, the value of the infrared fixed point of the strong coupling, and the number of flavors in agreement with observations. The nonperturbative analytic model gives an accurate description of the strong coupling across all scales, up to the highest available data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A tracking system to calculate patient skin dose in real-time during neurointerventional procedures using a biplane x-ray imaging system

Purpose: Neurovascular interventional procedures using biplane fluoroscopic imaging systems can lead to increased risk of radiation-induced skin injuries. The authors developed a biplane dose tracking system (Biplane-DTS) to calculate the cumulative skin dose distribution from the frontal and lateral x-ray tubes and display it in real-time as a color-coded map on a 3D graphic of the patient for immediate feedback to the physician. The agreement of the calculated values with the dose measured on phantoms was evaluated. Methods: The Biplane-DTS consists of multiple components including 3D graphic models of the imaging system and patient, an interactive graphical user interface, a data acquisition module to collect geometry and exposure parameters, the computer graphics processing unit, and functions for determining which parts of the patient graphic skin surface are within the beam and for calculating dose. The dose is calculated to individual points on the patient graphic using premeasured calibration files of entrance skin dose per mAs including backscatter; corrections are applied for field area, distance from the focal spot and patient table and pad attenuation when appropriate. The agreement of the calculated patient skin dose and its spatial distribution with measured values was evaluated in 2D and 3D for simulated procedure conditions using a PMMA block phantom and an SK-150 head phantom, respectively. Dose values calculated by the Biplane-DTS were compared to the measurements made on the phantom surface with radiochromic film and a calibrated ionization chamber, which was also used to calibrate the DTS. The agreement with measurements was specifically evaluated with variation in kVp, gantry angle, and field size. Results: The dose tracking system that was developed is able to acquire data from the two x-ray gantries on a biplane imaging system and calculate the skin dose for each exposure pulse to those vertices of a patient graphic that are determined to be in the beam. The calculations are done in real-time with a typical graphic update time of 30 ms and an average vertex separation of 3 mm. With appropriate corrections applied, the Biplane-DTS was able to determine the entrance dose within 6% and the spatial distribution of the dose within 4% compared to the measurements with the ionization chamber and film for the SK150 head phantom. The cumulative dose for overlapping fields from both gantries showed similar agreement. Conclusions: The Biplane-DTS can provide a good estimate of the peak skin dose and cumulative skin dose distribution during biplane neurointerventional procedures. Real-time display of this information should help the physician manage patient dose to reduce the risk of radiation-induced skin injuries.

60 APPLIED LIFE SCIENCES↗

NEAR-CONTACT BINARIES IZ MONOCEROTIS AND AR DRACONIS

We present multi-color photometric observations for two neglected near-contact binaries, IZ Mon (P=0--AMP--fd;77980) and AR Dra (P=0--AMP--fd;67584). By the aid of the updated W-D analysis code, the photometric solutions were deduced from the multi-color light curves (LCs). IZ Mon is a semi-detached binary with a mass ratio of q=0.388(±0.002), while AR Dra is a detached star with a mass ratio of q=0.652(±0.002). The asymmetric LCs of IZ Mon were modeled by a hot spot on the secondary’s surface, which may be attributed to mass transfer from the primary. Based on all collected eclipse times for two systems, we constructed their timing residual curves. The orbital period for IZ Mon may be continuously decreasing at a rate of dP/dt=−2.06(±0.04) days yr{sup −1}, which may result from mass and angular momentum loss from the central system. For AR Dra, there exists a cyclic variation with a period of P{sub 3}=104.9(±2.9) yr due to light-time orbit effect via the presence of the third body, whose mass is more than 0.28(±0.02) M{sub ⊙}. Finally, two near-contact binaries, IZ Mon and AR Dra, will evolve into contact binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

Isolating the young stellar population in the outer disk of NGC 300

The recent star formation history (SFH) in the outer disk of NGC 300 is presented through the analysis of color–magnitude diagrams (CMDs). We analyze resolved stellar photometry by creating CMDs from four Hubble Space Telescope fields containing a combination of images from the Advanced Camera for Surveys and the UVIS imager aboard the Wide Field Camera 3. From the best models of these CMDs, we derive the SFH in order to extract the young stellar component for the past 200 Myr. We find that the young stellar disk of NGC 300 is unbroken out to at least ∼8 scale lengths (including an upper limit out to ∼10 scale lengths) with r{sub s}=1.4±0.1 kpc, which is similar to the total stellar surface brightness profile. This unbroken profile suggests that NGC 300 is undisturbed, similar to the isolated disk galaxy NGC 2403. We compare the environments of NGC 300, NGC 2403, and M33 along with the properties of the gas and stellar disks. We find that the disturbed H i outer disk morphology is not accompanied by a break in the young stellar disk. This may indicate that processes which affect the outer H i morphology may not leave an imprint on the young stellar disk.

79 ASTRONOMY AND ASTROPHYSICS↗

Laser velocimeter measurements of the helicopter rotor-induced flow field

The use of a two-color laser velocimeter to measure the flow velocities in the wake of a helicopter rotor is discussed, including methods for obtaining two components of both instantaneous and time-averaged velocities. Results are presented from an experiment using a 2.13 m diameter model helicopter rotor operating at a tip speed ratio of 0.18 in a wind tunnel. The location of the tip vortex from the preceding blade was determined on the advancing side, and the diameter of the vortex core was found to be 15 percent of the blade chord (1.5 percent of the radius). The effects of the airfoil's bound vorticity were observed in the velocity distributions vry near the blade. These effects suggest that the laser velocimeter may be used to determine the aerodynamic loading (circulation) at a spanwise station on the blade. Also, the structure and boundary of the time-averaged wake were investigated.

Biggers, J. C.↗

Lunar occultation of Saturn. I - The diameters of Tethys, Dione, Rhea, Titan, and Iapetus

The diameters of Tethys, Dione, Rhea, Titan and Iapetus were determined from observations of their March 30, 1974, lunar occultations, made with the Mauna Kea 224 and 61 cm telescopes. Light curves were obtained simultaneously in four colors, and the difference between the time of occultation at the two telescopes provided a direct measurement of the slope of the lunar limb, found to be small in all cases. The satellite diameters were determined by least-squares fits of model occultation light curves to the data. Titan's diameter must be at least 5800 km, much larger than the currently accepted value of 5000 km, making it the largest satellite in the solar system. This larger diameter implies a low mean density. For the other four satellites arguments are presented in favor of accepting the occultation diameters corresponding to limb darkened disks. Except for Titan, the lunar occultation diameters generally agree with previous diskmeter and radiometric determinations.

Elliot, J. L.↗

Far-infrared emission from compact sources in NGC 2264 and the Rosette Nebula

The paper reports the discovery of far-IR emission at 53, 100, and 175 microns from two sources (one in NGC 2264 and another near the Rosette Nebula) associated with molecular clouds but not with any detectable radio continuum emission. The maximum source diameters are estimated to be 20 arcsec, and the spectra of both objects are shown to be broader than that of a 'typical' H II region. It is found that both objects are unresolved at all the IR wavelengths observed, have relatively wide IR spectra, are located at or near the apices of fan-shaped cometary nebulae, have colors between 50 and 200 microns that are among the coolest of any observed far-IR sources, and have luminosities that are an order of magnitude less than the weakest sources observed near compact H II regions. A cylindrically symmetric source model is considered in which a 'hole' in the dust distribution around the central source provides the visible luminosity of the nearby nebula and the dust temperature decreases rapidly with distance. It is suggested that the central sources are probably pre-main-sequence stellar objects with masses of 5 to 10 solar masses and luminosities of a few thousand suns.

Harvey, P. M.↗

Ocean Chlorophyll Studies from a U-2 Aircraft Platform

Chlorophyll gradient maps of large ocean areas were generated from U-2 ocean color scanner data obtained over test sites in the Pacific and Atlantic Oceans. The delineation of oceanic features using the upward radiant intensity relies on an analysis method which presupposes that radiation backscattered from the atmosphere and ocean surface can be properly modeled using a measurement made at 778 nm. An estimation of the chlorophyll concentration was performed by properly ratioing radiances measured at 472 nm and 548 nm after removing the atmospheric effects. The correlation between the remotely sensed data and in-situ surface chlorophyll measurements was validated in two sets of data. The results show that the correlation between the in-situ measured chlorophyll and the derived quantity is a negative exponential function and the correlation coefficient was calculated to be -0.965.

Kim, H. H.↗

Computer Software Management and Information Center

Computer programs for passive anti-roll tank, earth resources laboratory applications, the NIMBUS-7 coastal zone color scanner derived products, transportable applications executive, plastic and failure analysis of composites, velocity gradient method for calculating velocities in an axisymmetric annular duct, an integrated procurement management system, data I/O PRON for the Motorola exorcisor, aerodynamic shock-layer shape, kinematic modeling, hardware library for a graphics computer, and a file archival system are documented.

Source record↗

Solid hydrocarbon aerosols produced in simulated Uranian and Neptunian stratospheres

Solid hydrocarbon films were deposited in an RF plasma discharge of various CH4/H2/He mixtures under conditions simulating the formation of solid aerosols by magnetospheric charged particles in the stratospheres of Uranus and Neptune. The percentage of CH4 ranged from 0.0002 to 100 percent; the pressure in the discharge chamber was either 130 or 660 microbar; and the films produced were yellow to deep red-brown in color and 2-25 microns thick. The real and imaginary parts of the refractive index at wavelengths from 350 nm to 2.5 microns were determined for all the films, and the results are compared with observational data and the predictions of theoretical models in extensive tables and graphs. Good agreement is demonstrated, suggesting that aerosol production by this mechanism may be competitive with UV or charged-particle irradiation of hydrocarbon condensates.

Khare, B. N.↗

Absolute magnitude calibration using trigonometric parallax - Incomplete, spectroscopic samples

A new numerical algorithm is used to calibrate the absolute magnitude of spectroscopically selected stars from their observed trigonometric parallax. This procedure, based on maximum-likelihood estimation, can retrieve unbiased estimates of the intrinsic absolute magnitude and its dispersion even from incomplete samples suffering from selection biases in apparent magnitude and color. It can also make full use of low accuracy and negative parallaxes and incorporate censorship on reported parallax values. Accurate error estimates are derived for each of the fitted parameters. The algorithm allows an a posteriori check of whether the fitted model gives a good representation of the observations. The procedure is described in general and applied to both real and simulated data.

Ratnatunga, Kavan U.↗

Compact starbursts in ultraluminous infrared galaxies

The 40 ultraluminous galaxies in the IRAS Bright Galaxy Sample of sources stronger than S = 5.24 Jy at lambda = 60 microns were mapped with approximately 0.25 arcsec resolution at 8.44 GHz. Twenty-five contain diffuse radio sources obeying the FIR-radio correlation; these are almost certainly starburst galaxies. Fourteen other galaxies have nearly blackbody FIR spectra with color temperatures between 60 and 80 K so their (unmeasured) FIR angular sizes must exceed approximately 0.25 arcsec, yet they contain compact (but usually resolved) radio sources smaller than this limit. The unique radio and FIR properties of these galaxies can be modeled by ultraluminous nuclear starbursts so dense that they 67 are optically thick to free-free absorption at about 1.49 GHz and dust absorption at about 25 microns. Only one galaxy (UGC 08058 = Mrk 231) is a dominated by a variable radio source too compact to be an ultraluminous starburst; it must be powered by a 'monster'.

Condon, J. J.↗

Selection Algorithm for the CALIPSO Lidar Aerosol Extinction-to-Backscatter Ratio

The extinction-to-backscatter ratio (S(sub a)) is an important parameter used in the determination of the aerosol extinction and subsequently the optical depth from lidar backscatter measurements. We outline the algorithm used to determine Sa for the Cloud and Aerosol Lidar and Infrared Pathfinder Spaceborne Observations (CALIPSO) lidar. S(sub a) for the CALIPSO lidar will either be selected from a look-up table or calculated using the lidar measurements depending on the characteristics of aerosol layer. Whenever suitable lofted layers are encountered, S(sub a) is computed directly from the integrated backscatter and transmittance. In all other cases, the CALIPSO observables: the depolarization ratio, delta, the layer integrated attenuated backscatter, beta, and the mean layer total attenuated color ratio, gamma, together with the surface type, are used to aid in aerosol typing. Once the type is identified, a look-up-table developed primarily from worldwide observations, is used to determine the S(sub a) value. The CALIPSO aerosol models include desert dust, biomass burning, background, polluted continental, polluted dust, and marine aerosols.

Omar, Ali H.↗