Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wake model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Supersonic Pitch Damping Predictions of Blunt Entry Vehicles from Static CFD Solutions

A technique for predicting supersonic pitch damping of blunt axisymmetric bodies from static CFD data is presented. The contributions to static pitching moment due to forebody and aftbody pressure distributions are broken out and considered separately. The one-dimension moment equation is cast to model the separate contributions from forebody and aftbody pressures with no traditional damping term included. The aftbody contribution to pitching moment is lagged by a phase angle of the natural oscillation period. This lag represents the time for aftbody wake structures to equilibrate while the body is oscillation. The characteristic equation of this formulation indicates that the lagged backshell moment adds a damping moment equivalent in form to a constant pitch damping term. CFD calculations of the backshell's contribution to the static pitching moment for a range of angles-of-attack is used to predict pitch damping coefficients. These predictions are compared with ballistic range data taken of the Mars Exploration Rover (MER) capsule and forced oscillation data of the Mars Viking capsule. The lag model appears to capture dynamic stability variation due to backshell geometry as well as Mach number.

Schoenenberger, Mark↗

Kinematic Modeling of Separation Compression for Paired Approaches to Closely-Spaced Parallel Runways

In a simultaneous paired approach to closely-spaced parallel runways, a pair of aircraft flies in close proximity on parallel approach paths. The longitudinal separation between the aircraft must be maintained within a range that avoids wake encounters and, if one of the aircraft blunders, avoids collision. To increase operational availability, the approach procedure must accommodate a mixture of aircraft sizes and, consequently, approach speeds. In these procedures, the slower aircraft is placed in the lead position. The faster aircraft maintains separation from the slow aircraft in a dependent operation until final approach and flies independently afterward. Due to the higher approach speed of the fast aircraft, longitudinal separation will decrease during final approach. Therefore, the fast aircraft must position itself before the final approach so that it will remain within the safe range of separation as separation decreases. Given the approach geometry and speed schedule for each aircraft, one can use kinematics to estimate the separation loss between a pair of aircraft. A kinematic model can complement fast-time Monte-Carlo simulations of the approach by enabling a tailored reduction in the variation of starting position for the fast aircraft. One could also implement the kinematic model in ground-based or on-board decision support tools to compute the optimal initial separation for a given pair of aircraft. To better match the auto-coupled flight of real aircraft, the paper derives a kinematic model where the speed schedule is flown using equivalent airspeed. The predicted time of flight using the equivalent airspeed kinematic model compares well against a high-fidelity aircraft simulation performing the same approach. This model also demonstrates a modest increase in the predicted loss of separation when contrasted against a kinematic model that assumes the scheduled speed is true airspeed.

Madden, Michael M.↗

Imaging the wakes of jets with energy-energy-energy correlators

As the partons in a high energy jet propagate through the droplet of quark-gluon plasma (QGP) produced in a heavy-ion collision they lose energy to, kick, and are kicked by the medium. The resulting modifications to the parton shower encode information about the microscopic nature of QGP. A direct consequence, however, is that the momentum and energy lost by the parton shower are gained by the medium and, since QGP is a strongly coupled liquid, this means that the jet excites a wake in the droplet of QGP. After freezeout, this wake becomes soft hadrons with net momentum in the jet direction meaning that what an experimentalist later reconstructs as a jet includes hadrons originating from both the modified parton shower and its wake. This has made it challenging to find experimental observables that provide an unambiguous view of the dynamical response of a droplet of QGP to a jet shooting through it. Recent years have seen significant substantial advances in the theoretical and experimental understanding of the substructure of jets, in particular, using correlation functions, $\langle$ ($\vec{n}$ 1 )•••$\mathcal{E}$($\vec{n}$ k ) $\rangle$, of the energy flux operator in proton-proton collisions and, recently, in heavy-ion collisions. So far, such studies have focused primarily on the two-point correlator, which allows for the identification of the angular scale of the underlying dynamics. Higher-point correlators hold the promise of mapping out the dynamics themselves. In this paper we perform the first study of the shape-dependent three-point energy-energy-energy correlator in heavy-ion collisions. Using the Hybrid Model to simulate the interactions of high energy jets with the QGP medium, we show that the three-point correlator presents us with a striking new opportunity. We find that hadrons originating from wakes are the dominant contribution to the three-point correlator in the kinematic regime in which the three points are well-separated in angle, forming a roughly equilateral triangle. This equilateral region of the correlator is far from the region populated by collinear vacuum emissions, making it a canvas on which jet wakes are laid out, where experimentalists can map their shapes. Our work provides a key step towards the systematic use of energy correlators to image and unravel the dynamical response of a droplet of QGP that has been probed by a passing jet, and motivates numerous experimental and theoretical studies.

Jets and Jet Substructure↗

Benefits of Two Turbine Rotor Diameters and Hub Heights in the Same Wind Farm

Significant turbine-wake interactions greatly reduce power output in a wind farm. If different turbine hub heights and rotor diameters are included in the same wind farm, the wake interference in the farm will be reduced, resulting in a lower cost of energy (COE) than a farm with identical turbines. In this paper, we present a method to model wind farm COE in farms with hub heights and rotor diameters that vary across the wind farm. We also demonstrate how to optimize these wind farms to minimize COE. The results show that COE can be greatly reduced in wind farms with non-homogeneous turbines, especially when the turbines are spaced close together. For a unidirectional wind rose, including different turbine design in the wind farm has a similar decrease in COE to spreading the wind turbines farther apart. When the rotor diameter and hub height of the wind turbines in a farm are optimized uniformly, a COE decrease of 4% to 13% (depending on the grid spacing and wind shear exponent) is achieved compared to the baseline. When the rotor diameter and turbine heights are optimized non-uniformly, with two different diameters and heights throughout the farm, there is a COE decrease of 22% to 41% compared to the baseline. For a more spread wind rose with a dominant probability from the west, there is a COE decrease between 3% and 10% for uniformly optimized rotor diameter and height compared to the baseline. With two optimized rotor diameters and heights through the farm, a COE decrease of 3% to 19% is achieved. For a similar wind rose shifted such that the dominant wind direction is from the northwest, a COE decrease between 3% and 10% results from uniformly optimized wind turbines compared to the baseline. A COE decrease of 3% to 17% compared to the baseline occurs with two different turbines are optimized throughout the wind farm.

17 WIND ENERGY↗

Alignment of dust particles by ion drag forces in subsonic flows

The role of ion drag forces for the alignment of dust particles is studied for subsonic flows. While alignment by wake-field attraction is a well known mechanism for supersonic flows, it is argued here that ion-scattering forces become more important in subsonic ion flows. A model of non-overlapping collisions is introduced and numerical results are discussed. For typical conditions of dusty plasma experiments, alignment by drag forces is found strong enough to overcome the destabilizing force from Coulomb repulsion between dust particles. It turns out that the major contribution to the horizontal restoring force originates from the transverse momentum transfer, which is usually neglected in ion drag force calculations because of an assumed rotational symmetry of the flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Beam delivery and beamstrahlung considerations for ultra-high energy linear colliders

As part of the Snowmass'21 community planning excercise, the Advanced Accelerator Concepts (AAC) community proposed future linear colliders with center-of-mass energies up to 15 TeV and luminosities up to 50 × 1034 cm -2 s -1 in a compact footprint. In addition to being compact, these machines must also be energy efficient. We identify two challenges that must be addressed in the design of these machines. First, the Beam Delivery System (BDS) must not add significant length to the accelerator complex. Second, beam parameters must be chosen to mitigate beamstrahlung effects and maximize the luminosity-per-power of the machine. In this paper, we review advances in plasma lens technology that will help to reduce the length of the BDS system, and we detail new Particle-in-Cell simulation studies that will provide insight into beamstrahlung mitigation techniques. We apply our analysis to both $e$ + $e$ - and $γγ$ colliders. The challenges and solutions described in this paper are considered independently. In conclusion, a unified, self-consistent concept for a BDS system for a 15 TeV linear collider will be the subject of future work.

47 OTHER INSTRUMENTATION↗

Simple formula for surface roughness wakes

For energy recovery linacs (ERLs) the energy spread induced by wake- fields grows throughout acceleration and decelleration. Too much fractional momentum spread at low energy will complicate beam transport. This note uses some analytical results and a simple model of surface roughness correlation functions to obtain a wakefield formula that is very fast and easy to compute.

43 PARTICLE ACCELERATORS↗

Impact of Aerodynamic Modeling Assumptions on Flutter Speeds of Vertical-Axis Wind Turbines

Theodorsen’s unsteady aerodynamic theory has been used extensively in flutter speed prediction of wind turbine blades. In this study, three key assumptions of Theodorsen theory (thin airfoil, flat wake, and small angle of attack) have been revisited, and all three assumptions have been addressed in combination to obtain new lift and moment equations that are subsequently applied in flutter calculations for full-scale vertical-axis wind turbine (VAWT) rotors, not just of an individual airfoil or blade. Furthermore, edgewise aerodynamics terms are added to the lift and moment equations to include their effects on flutter speeds. The newly obtained equations were implemented in the OWENS (Offshore Wind ENergy Simulation) toolkit, which is an FEM (Finite Element Method)-based toolkit for aeroelastic analysis of VAWTs. The effect of modifying each of these assumptions has been studied for the flutter RPM prediction of three primary modes of flutter of VAWTs: propeller, butterfly, and tower modes. For the land-based case, the most change was observed for the flutter RPM of the propeller mode, with a maximum increase of 2.62% for the two-bladed UTD 5 MW VAWT case. For the floating offshore case, the primary flutter modes (tower and platform pitch) were not significantly affected.

Engineering↗

Accretion flows in binary X-ray systems

Recent developments in the study of accretion flows in binary X-ray systems are reviewed, concentrating on issues concerning the gas flows rather than the radiation mechanisms. A model for Her X-1 is presented which illustrates the main structures expected to exist in the case where mass transfer is by Roche-lobe overflow and the X-ray source is a rotating magnetized neutron star. A model for Cyg X-1 is given which shows the accretion-flow structures to be expected if the compact object is a black hole, including an accretion wake and a very small accretion disk around the black hole. Physical parameters of the accretion flows in these two instances are examined along with some scale lengths that may be derived from these parameters by dimensional analysis. Detailed attention is given to neutron-star magnetospheres (for slow, intermediate, and fast rotators), accretion-disk structure, accretion from stellar winds, and the relationship between X-rays and the gas dynamics of accretion flows. It is suggested that accretion flows in binary X-ray systems be observed directly by means of high-resolution UV and X-ray spectroscopy.

Mccray, R.↗

Numerical analysis of turbulent wakes of axial flow turbomachinery rotor blades

The wakes of rotor blades are turbulent, three-dimensional, and are subjected to curvature and rotation effects. The objective of this study is to predict the development of such wakes and compare the predictions with the existing data. A finite difference procedure is employed in the numerical analysis of the wake utilizing the continuity, momentum, and turbulence closure equations in the rotating curvilinear and non-orthogonal coordinate system. The turbulence closure is affected by the two equations model and the simplified Reynolds stress model. The predictions from both the models agree well with the mean velocity and the turbulence data.

Hah, C.↗

Finite element computation of hypersonic flow past a complete body

The finite element method was applied to compressible flows past complete blunt bodies in a first attempt to use the method to model hypersonic flow past re-entry vehicles. A Runge-Kutta time marching scheme was utilized and was found to adequately handle the bow shock and downstream wake. Adaptive refinement was successively applied to the flow field grid, and improvement in solution accuracy was observed. The results reported in this paper include the flow past a circular cylinder at Mach 3, and the flow in the plane of symmetry for the flow past a sphere at Mach 10.

Hommel, Mark↗

The challenges of simulating wake vortex encounters and assessing separation criteria

During landings and take-offs, the longitudinal spacing between airplanes is in part determined by the safe separation required to avoid the trailing vortex wake of the preceding aircraft. Safe exploration of the feasibility of reducing longitudinal separation standards will require use of aircraft simulators. This paper discusses the approaches to vortex modeling, methods for modeling the aircraft/vortex interaction, some of the previous attempts of defining vortex hazard criteria, and current understanding of the development of vortex hazard criteria.

Dunham, R. E.↗

Simulations of Solar Wind Plasma Flow Around a Simple Solar Sail

In recent years, a number of solar sail missions of various designs and sizes have been proposed (e.g., Geostorm). Of importance to these missions is the interaction between the ambient solar wind plasma environment and the sail. Assuming a typical 1 AU solar wind environment of 400 km/s velocity, 3.5 cu cm density, ion temperature of approx.10 eV, electron temperature of 40 eV, and an ambient magnetic field strength of 10(exp -4) G, a first order estimate of the plasma interaction with square solar sails on the order of the sizes being considered for a Geostorm mission (50 m x 50 m and 75 m x 75 m corresponding to approx.2 and approx.3 times the Debye length in the plasma) is carried out. First, a crude current balance for the sail surface immersed in the plasma environment and in sunlight was used to estimate the surface potential of the model sails. This gave surface potentials of approx.10 V positive relative to the solar wind plasma. A 3-D, Electrostatic Particle-in-Cell (PIC) code was then used to simulate the solar wind flowing around the solar sail. It is assumed in the code that the solar wind protons can be treated as particles while the electrons follow a Boltzmann distribution. Next, the electric field and particle trajectories are solved self-consistently to give the proton flow field, the electrostatic field around the sail, and the plasma density in 3-D. The model sail was found to be surrounded by a plasma sheath within which the potential is positive compared to the ambient plasma and followed by a separate plasma wake which is negative relative to the plasma. This structure departs dramatically from a negatively charged plate such as might be found in the Earth s ionosphere on the night side where both the plate and its negative wake are contiguous. The implications of these findings are discussed as they apply to the proposed Geostorm solar sail mission.

Garrett, Henry B.↗

Using Qualitative Hazard Analysis to Guide Quantitative Safety Analysis

Quantitative methods can be beneficial in many types of safety investigations. However, there are many difficulties in using quantitative m ethods. Far example, there may be little relevant data available. This paper proposes a framework for using quantitative hazard analysis to prioritize hazard scenarios most suitable for quantitative mziysis. The framework first categorizes hazard scenarios by severity and likelihood. We then propose another metric "modeling difficulty" that desc ribes the complexity in modeling a given hazard scenario quantitatively. The combined metrics of severity, likelihood, and modeling difficu lty help to prioritize hazard scenarios for which quantitative analys is should be applied. We have applied this methodology to proposed concepts of operations for reduced wake separation for airplane operatio ns at closely spaced parallel runways.

Shortle, J. F.↗

Sleep, Sleepiness, and Performance Across Three In-Flight Bunk Rest Opportunities

Introduction: Airline pilots are required to take a rest break in a bunk during long-haul flights in an effort to reduce sleepiness during critical phases of flight. It is unclear, however, whether each rest break affords equal opportunity for sleep. We aimed to characterize sleep, sleepiness, and performance outcomes across three in-flight rest breaks during long-haul flights. Methods: Thirty-seven pilots wore actiwatches and completed sleep diaries for approximately two weeks while flying a variety of long-haul routes (n=126 flights). Self-reported in-flight bunk rest (BR) periods were used to set rest intervals and sleep was estimated within these intervals using actigraphy software (wake threshold set to medium). Pilots provided Karolinska Sleepiness Scale ratings (KSS) and performed a 5-minute psychomotor vigilance task (PVT) before landing. A linear mixed-effects model with participant included as a random effect and allowed to vary by intercept was used to assess differences between BR opportunities. Results : The majority (97%, n=122) of bunk rest periods contained sleep (as estimated by actigraphy). The mean (+/- standard deviation) sleep duration for the first, middle, and third BR opportunity was 152.8 (69.7), 149.2 (44.1), 125.2 (44.9) minutes, respectively. There was a significant effect of BR opportunity for sleep duration (F2,54 = 3.747, p=.03) and KSS (F2,44 = 7.869, p=.001). Bonferroni adjusted planned pairwise contrasts revealed that pilots using the third BR obtained significantly less sleep than in the first BR (p=.029). KSS ratings prior to landing were higher for the third BR compared to both the first (p=.001) and middle BR (p=.017). There were no significant differences for PVT speed or lapses (all p>05). Conclusion: These results suggest that the last rest break is associated with shorter sleep, lower alertness, and no differences in performance relative to the other rest breaks. Further analysis is required to determine whether the higher KSS ratings following the third rest break are associated with sleep inertia, or whether other factors may be involved.

sleepiness↗

RApid Blade and Blade-Vortex InTeraction (RABBIT) Reimagined: Algorithm Improvement and User-Friendly Interface Implementation

Rotorcraft noise source identification and reduction is crucial to the emergence of the Urban Air Mobility (UAM) market. One key rotor noise source is Blade Vortex Interaction (BVI), caused by the rotor blades interacting with the rotor wake. The low-fidelity RApid Blade and Blade-Vortex InTeraction (RABBIT) tool was created to predict the location and characteristics of BVI noise. RABBIT enables engineers to quickly design and simulate UAM configurations and understand BVI occurrences for a desired flight condition. Furthermore, RABBIT can also identify the time and location of blade overlap for coaxial rotors. RABBIT is not a general acoustic prediction tool, but instead utilizes vortex and wake parameters to visualize and predict BVI aerodynamics. RABBIT algorithm has been further developed including reduction of computational time, accounting for BVI source time arrival, improved vortex strength modeling, and BVI impulse factor. A user-friendly app is presented with the intent of bringing RABBIT to the masses to allow engineers from various educational backgrounds to design and begin to understand BVI. Furthermore, RABBIT capabilities are highlighted by a parameter study highlighting key parameters that impact BVIalong with highlighting RABBIT’s ability to identify BVI occurrences from other rotors.

RApid↗

Observed Increase in Tropical Cyclone‐Induced Sea Surface Cooling Near the U.S. Southeast Coast

Abstract Tropical cyclones (TCs) induce substantial upper‐ocean mixing and upwelling, leading to sea surface cooling. In this study, we explore changes in TC‐induced cold wakes along the United States (U.S.) Southeast and Gulf Coasts during 1982–2020. Our study shows a significant increase in TC‐induced sea surface temperature (SST) cooling of about 0.20°C near the U.S. Southeast Coast over this period. However, for the U.S. Gulf Coast, trends in TC‐induced SST cooling are insignificant. Analysis of the large‐scale oceanic environments indicate that the increasing TC‐induced cold wakes near the Southeast coast have been predominantly caused by the cooling of subsurface waters in that region. This upper‐ocean change is attributed to the enhancement of surface pressure gradient across land‐sea boundary and the associated increase in alongshore winds over there. Further analysis with climate models reveals the important role of anthropogenic forcings in driving these changes in the atmospheric circulation response along the U.S. Southeast Coast.

54 ENVIRONMENTAL SCIENCES↗