Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “subsurface data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

U–Pb Geochronology and Stable Isotope Geochemistry of Terrestrial Carbonates, Lower Cretaceous Cedar Mountain Formation, Utah: Implications for Synchronicity of Terrestrial and Marine Carbon Isotope Excursions

The terrestrial Lower Cretaceous Cedar Mountain Formation, Utah, is a critical archive of paleoclimate, tectonics, and vertebrate ecology and evolution. Early Cretaceous carbon cycle perturbations associated with ocean anoxia have been interpreted from this succession, as expressed in stable carbon isotopes. However, refining the timing of the observed stable isotope excursions remains a key challenge in understanding how marine anoxia affects the Earth system, and is ultimately recorded in the terrestrial realm. The geochronology and geochemistry of a terrestrial carbonate near the base of this succession, which potentially records the Ap7 global carbon isotope excursion, is studied here. Petrographic and geochemical analyses are used to test plausible mechanisms for U incorporation into the calcite lattice in this sample. Using these methods, the hypothesis that the incorporation of U was at or close to the timing of carbonate precipitation is evaluated. U–Pb geochronology of calcite indicates a plausible Early Cretaceous age. However, comparison of the new U–Pb ages of calcite with detrital zircon maximum depositional ages immediately beneath the studied sample indicates a disparity in the apparent sedimentation rates if both types of geochronologic information are interpreted as reflecting the timing of sediment deposition. The totality of data supports an early, and high-temperature, diagenetic timing of U incorporation, with potential for minor leaching of U in subsequent fluid–rock interaction. The most likely mechanism for U transport and immobilization in these samples is hydrothermal fluid–rock interaction. Therefore, the radiometric ages, and corresponding stable isotope composition of U-bearing carbonate domains in this sample, indicate early subsurface fluid–rock interactions and not a record of atmosphere–soil geochemical reactions.

36 MATERIALS SCIENCE↗

The Diversity of Martian Volcanic Features as Seen in MOC Images and MOLA Topographic Data

This project focused on the evolution of the summit areas of Martian volcanoes. By using data collected from the Mars Orbiter Camera (MOC) and Mars Laser Altimeter (MOLA) instruments, we tried to better understand the diversity of constructional volcanism on Mars, and hence further understand eruption processes. We investigated the styles of volcanism on the major volcanic constructs (Olympus, Arsia, Pavonis, and Ascraeus Montes), and also studied the role of magma-volatile interactions within the shallow subsurface of these volcanoes and the surrounding areas. Theoretical models for internal processes within volcanoes, including the thermal influences of dike intrusions on pre-existing volatiles, were developed based on our identification of landform distributions. Our work provided new insights into the diversity of volcanism on Mars, and the distribution of Martian volatiles in space and time. Highlights of our results include: 1) The identification of large ash deposits at the summit of Arsia Mons; 2) The study of a large flank eruption on Elysium Mons and the estimation of the effusion rate needed to produce the observed lava channel; 3) The quantitative description of dike intrusion into volatile-rich terrain to explain the origin of Hrad Vallis; 4) The identification of constructional ridges on top of very young lava flows from Olympus Mons, with the interpretation that these ridges were formed by very recent phreatomagmatic eruptions; and 5) The characterization of the dimensions and slope distributions on 18 volcanic edifices on Mars.

Mouginis-Mark, Peter J.↗

Experimental Heat Transfer Supporting Simulated Water Well Performance on Mars

Favorable indications of massive quantities of water on Mars have initiated studies of potential changes to human Mars missions. Using a technique known as a Rodriguez Well to melt the ice, store the resulting water in a subsurface ice cavity until needed, and then pump water to the surface for use is one potential means to effect these changes. A computer simulation of the Rodriguez Well in a terrestrial environment is one of the engineering tools being used to characterize the performance of this type of well on Mars. An experiment at the NASA Johnson Space Center is gathering data for convective heat transfer and evaporation rates at Mars surface conditions so that this computer simulation can be properly modified to predict performance on Mars. While quantitative results await processing, tests have indicated that a pool of water can be maintained at 1°C to 2° C while at Mars surface temperatures and pressures.

Hoffman, Stephen J.↗

Mars Water Well Performance: Experimental Heat Transfer Results Supporting Simulations

Favorable indications of massive quantities of water on Mars have initiated studies of potential changes to human Mars missions. Using a technique known as a Rodriguez Well to melt the ice, store the resulting water in a subsurface ice cavity until needed, and then pump water to the surface for use is one potential means to effect these changes. A computer simulation of the Rodriguez Well in a terrestrial environment is one of the engineering tools being used to characterize the performance of this type of well on Mars. An experiment at the NASA Johnson Space Center is gathering data for convective heat transfer and evaporation rates at Mars surface conditions so that this computer simulation can be properly modified to predict performance on Mars. While quantitative results await processing, tests have indicated that a pool of water can be maintained at 1°C to 2° C while at Mars surface temperatures and pressures.

Mars↗

Time-lapse VSP integration and calibration of subsurface stress field utilizing machine learning approaches: A case study of the morrow B formation, FWU

This study aims to develop a methodology for calibrating subsurface stress changes through time-lapse vertical seismic profiling (VSP) integration. The selected study site is a region around the injector well located within Farnsworth field unit (FWU), where there is an ongoing CO 2 -enhanced oil recovery (EOR) operation. In our study, a site-specific rock physics model was created from extensive geological, geophysical, and geomechanical characterization through 3D seismic data, well logs, and core assessed as part of the 1D MEM conducted on the characterization well within the study area. Here, the Biot-Gassmann workflow was utilized to combine the rock physics and reservoir simulation outputs to determine the seismic velocity change due to fluid substitution. Modeled seismic velocities attributed to mean effective stress were determined from the geomechanical simulation outputs, and the stress-velocity relationship developed from ultrasonic seismic velocity measurements. A machine learning-assisted workflow comprised of an artificial neural network and a particle swarm optimizer (PSO) was utilized to minimize a penalty function created between the modeled seismic velocities and the observed time-lapse VSP dataset. The successful execution of this workflow has affirmed the suitability of acoustic time-lapse measurements for 4D-VSP geomechanical stress calibration pending measurable stress sensitivities within the anticipated effective stress changes and the availability of suitable and reliable datasets for petroelastic modeling. © 2023 Society of Chemical Industry and John Wiley & Sons, Ltd.

58 GEOSCIENCES↗

Hydrogeological Model Selection Among Complex Spatial Priors

Hydrogeological field studies rely often on a single conceptual representation of the subsurface. This is problematic since the impact of a poorly chosen conceptual model on predictions might be significantly larger than the one caused by parameter uncertainty. Furthermore, conceptual models often need to incorporate geological concepts and patterns in order to provide meaningful uncertainty quantification and predictions. Consequently, several geologically realistic conceptual models should ideally be considered and evaluated in terms of their relative merits. Here, we propose a full Bayesian methodology based on Markov chain Monte Carlo to enable model selection among 2-D conceptual models that are sampled using training images and concepts from multiple-point statistics. More precisely, power posteriors for the different conceptual subsurface models are sampled using sequential geostatistical resampling and Graph Cuts. To demonstrate the methodology, we compare and rank five alternative conceptual geological models that have been proposed in the literature to describe aquifer heterogeneity at the MAcroDispersion Experiment site in Mississippi, USA. We consider a small-scale tracer test for which the spatial distribution of hydraulic conductivity impacts multilevel solute concentration data observed along a 2-D transect. The thermodynamic integration and the stepping-stone sampling methods were used to compute the evidence and associated Bayes factors using the computed power posteriors. We find that both methods are compatible with multiple-point statistics-based inversions and provide a consistent ranking of the competing conceptual models considered.

58 GEOSCIENCES↗

Hole formation effect on surface morphological response of plasma-facing tungsten

We report simulation results on the effect of helium (He) bubble bursting-mediated surface hole formation on the surface morphological response of tungsten plasma-facing components (PFCs) in nuclear fusion devices. Our analysis is based on an atomistically informed, continuum-scale model, which is capable of accessing the spatiotemporal scales relevant to the fuzz nanostructure formation process on the surface of PFC tungsten. Our simulations account, in an empirical fashion, for two types of subsurface bubble dynamical phenomena in the nanobubble region of PFC tungsten during He plasma irradiation, involving bubble bursting and surface crater formation. We demonstrate that the hole formation effect on the PFC tungsten surface accelerates the growth rate of nanotendrils and the onset of fuzz formation. As a result, the predicted incubation time for surface nanotendril growth is shortened, in agreement with experimental data of incubation fluence at comparable plasma exposure conditions. We also explore systematically the dependence of the PFC surface morphological response on the areal density of holes introduced at regular time intervals onto the He-implanted tungsten surface, a parameter in our analysis that serves as a proxy for the rate of He bubble bursting. More importantly, our simulations capture fine surface features in the PFC tungsten surface morphology and predict that the average spacing between nanotendrils is on the order of 100 nm, consistent with the experimental findings.

Chen, Chao-Shou (ORCID:0000000307910042)↗

Carbon Storage Core Characterization Efforts at NETL

The multi-scale Computed Tomography (CT) and core flow facility in the Geocharacterization Laboratory at NETL, Morgantown yields porosity, permeability, and fracture properties of rock core samples obtained from the subsurface while maintaining the integrity of the sample. Additionally, geophysical bulk rock properties are analyzed with the laboratory’s GeoTEK multi-sensor core logger in a comparable fashion to downhole methods. NETL researchers collaborate with stakeholders within the carbon storage, oil and gas, and critical minerals sectors. Since 2017, over 1.88 miles of core have been analyzed within the laboratory and all data is publicly available through the Technical Report Series (TRS) on the Energy Data eXchange (EDX). Additionally, the website, RokBase, was curated to extrapolate and visualize the high-resolution data from field operations. The characterization of the Lively Grove #1 (LG#1) well provides a case study into the full capabilities of the Geocharacterization Laboratory. During the comprehensive study of LG#1 ~1-2 mm in diameter, vertical to bedding, cylindrical structures were identified throughout the St. Peter Formation. These structures are pervasive throughout the St. Peter Formation at depth and are characterized as the trace fossil, Skolithos.

Isom, Shelby L↗

REMOVAL OF IODIDE FROM GROUNDWATER USING SILVER CHLORIDE WHITE PAPER

Releases from the F and H Area Seepage Basins on the Savannah River Site (SRS) have caused groundwater plumes that contain a variety of contaminants. These plumes are releasing contaminants into Fourmile Branch, which is a small tributary of the Savannah River. The metallic contaminant releases to the branch are being controlled by base injection. The base injection targets cationic contaminants and was not intended to reduce the concentration of I-129 in groundwater. SRS and the regulatory agencies believe it is appropriate to investigate remedial alternatives that could reduce the I-129. The Savannah River Site Area Closures Projects (ACP) and the Savannah River National Laboratory (SRNL) are developing an innovative in situ treatment for I-129 using silver chloride (AgCl). The proposed AgCl amendment has a very small particle size and is designed to be injected into the contaminated aquifer to capture I-129. The solubility of AgI is several orders of magnitude lower than the solubility of AgCl. Thus, when I-129 comes in contact with AgCl it forms silver iodide (AgI), which is very stable and essentially insoluble in water. SRNL has been performing bench-scale column tests on the effectiveness of silver chloride to capture iodine in an aqueous solution. These initial tests evaluate silver chloride in four different particle sizes; 4-5 millimeters (standard reagent silver chloride), approximately 1 millimeters (sieved reagent silver chloride), approximately 2 micrometers (ultra fine grind without a grinding agent), and <1 micrometer (ultra fine grind with a grinding agent). The first two experiments with macro-sized particles were proof of principle tests. In these the AgCl was mechanically mixed into a portion of the soil filling the columns. The last two were to test the effectiveness of injecting particles suspended in an aqueous solution--the ability to inject the particles, their retention in the column and their effectiveness at removing dissolved iodide from solution. The amendments for these two columns were obtained from a private company specializing in ultra-fine grinding of materials. They were ground in propylene glycol because when ground in water silver metal electroplated onto the steel grinding equipment. Table 1 shows the list of columns and the amendment characteristics. The results of these column experiments demonstrate that solid silver chloride is highly effective at removing dissolved iodine from water and should be an effective amendment for removing I-129 from groundwater. Based on known groundwater chemistry and the reaction of AgCl with I- to produce AgI, the only interference will be natural dissolved stable iodine (I-127). Millings et al. (2002) reported a maximum I-127 concentration of 2.2 ug/L in groundwater from well P-27D, a background water table well near F-Area. The concentration of dissolved iodide used in these experiments is approximately 4500 times this natural concentration. Therefore, a AgCl amendment in the subsurface at the same concentration used in these experiments, might effectively remove I-129 for up to 4500 times the number of pore volumes of groundwater as observed here. This assumes homogeneous distribution of the amendment and no occlusion by other minerals in the subsurface. The only reliable way to evaluate these effects is by trial in the field. The column studies also suggest that the amendment is readily injectable into sediments, but will not be highly mobile. The fact that the effluent from Column 4 shows no iodide breakthrough after nearly 11 pore volumes indicates that some of the injected AgCl was trapped in the column. A mass balance on iodide reacted so far suggests that a minimum of 0.056 grams of silver chloride was trapped in the column to react with the iodide. This is 5.6% of the mass injected. Assume the 1-foot column represents the first foot of sediment in the subsurface into which the amendment is injected. If 5.6% of the AgCl particles are trapped in each subsequent foot of sediment through which the injectate moves, at 100 feet the concentration of particles will be 3% of the injection concentration. This is the maximum possible concentration indicated by these column studies, because far more AgCl may have been trapped in the column. Continued data collection will tell how much more. Dissolved silver concentrations from the silver chloride amendment will be low. Effluent from Column 1 was analyzed for dissolved silver and the concentrations were below the detection limit of 0.2 mg/L.

36 MATERIALS SCIENCE↗

Use of visible, near-infrared, and thermal infrared remote sensing to study soil moisture

Two methods are described which are used to estimate soil moisture remotely using the 0.4- to 14.0 micron wavelength region: (1) measurement of spectral reflectance, and (2) measurement of soil temperature. The reflectance method is based on observations which show that directional reflectance decreases as soil moisture increases for a given material. The soil temperature method is based on observations which show that differences between daytime and nighttime soil temperatures decrease as moisture content increases for a given material. In some circumstances, separate reflectance or temperature measurements yield ambiguous data, in which case these two methods may be combined to obtain a valid soil moisture determination. In this combined approach, reflectance is used to estimate low moisture levels; and thermal inertia (or thermal diffusivity) is used to estimate higher levels. The reflectance method appears promising for surface estimates of soil moisture, whereas the temperature method appears promising for estimates of near-subsurface (0 to 10 cm).

Blanchard, M. B.↗

Use of visible, near-infrared, and thermal infrared remote sensing to study soil moisture

Two methods are used to estimate soil moisture remotely using the 0.4- to 14.0-micron wavelength region: (1) measurement of spectral reflectance, and (2) measurement of soil temperature. The reflectance method is based on observations which show that directional reflectance decreases as soil moisture increases for a given material. The soil temperature method is based on observations which show that differences between daytime and nighttime soil temperatures decrease as moisture content increases for a given material. In some circumstances, separate reflectance or temperature measurements yield ambiguous data, in which case these two methods may be combined to obtain a valid soil moisture determination. In this combined approach, reflectance is used to estimate low moisture levels; and thermal inertia (or thermal diffusivity) is used to estimate higher levels. The reflectance method appears promising for surface estimates of soil moisture, whereas the temperature method appears promising for estimates of near-subsurface (0 to 10 cm).

Blanchard, M. B.↗

Distribution, morphology, and origin of ridges and arches in Mare Serenitatis

Lunar mare ridges and arches in Mare Serenitatis were mapped to understand better their mode of formation. Maps of these features indicate that several pre-mare impacts in the Serenitatis area may be responsible for the localization of the circular ridge systems and that the subsurface, pre-mare topography is more complex than previously recognized. Apollo Lunar Sounder cross sections of ridge systems in southern Serenitatis indicate 50 to 100 m of local relief on these features. Small-scale features of ridges, such as medial lineations and lobate margins, do not conclusively define the origin of the ridges. However, estimates of crustal shortening from Lunar Sounder data and the coincidence of the major ridge system with the Serenitatis mascon suggest that ridges and arches were formed by gravitational readjustments of the mare fill along four probable impact structures and along a north-trending fracture pattern.

Maxwell, T. A.↗

The Biological Potential of Present-day Mars

In the mid-1970s the twin Viking Landers conducted three biological experiments in two different locations on the surface of Mars. Results from these experiments did not provide conclusive evidence of biological activity, and instead they were consistent with abiotic chemical reactions in the regolith. The paradigm established by the Viking missions is that the near-surface environment on Mars is too cold, dry, and hostile for life as we know it. Our understanding of the limits of metabolic activity and growth in terrestrial organisms, together with ecological studies in terrestrial analog environments, some of which approximate the temperature and dryness conditions on Mars, seem to support this view. But data gathered by surface and orbital assets in the past two decades suggests that liquid water could still be an important agent of landscape evolution over timescales ranging from seasons to millions of years. In addition, the tantalizing discovery of both liquid water buried deep beneath the southern polar deposits and fluctuating levels of methane in the atmosphere make the existence of a subsurface biosphere both possible and realistic. These discoveries have sparked a renewed interest on the biological potential of present-day Mars, and the possibility of extant life. This chapter reviews the environmental aspects most relevant to the biological potential of present-day Mars, emphasizing the near-surface environment that will be sampled and investigated by future robotic missions.

Life↗

Investigation on Microbial Dissolution of Uranium (VI) from Autunite Mineral - 13421

Precipitating autunite minerals by polyphosphate injection was identified as a feasible remediation strategy for sequestering uranium in contaminated groundwater and soil in situ at the Hanford Site. Autunite stability under vadose and saturated zone environmental conditions can help to determine the long-term effectiveness of this remediation strategy. The Arthrobacter bacteria are one of the most common groups in soils and are found in large numbers in Hanford soil as well as other subsurface environments contaminated with radionuclides. Ubiquitous in subsurface microbial communities, these bacteria can play a significant role in the dissolution of minerals and the formation of secondary minerals. The main objective of this investigation was to study the bacterial interactions under oxidizing conditions with uranium (VI); study the potential role of bicarbonate, which is an integral complexing ligand for U(VI) and a major ion in groundwater compositions; and present data from autunite dissolution experiments using Arthrobacter strain G968, a less U(VI)-tolerant strain. Sterile 100 mL glass mixed reactors served as the major bioreactor for initial experimentation. These autunite-containing bioreactors were injected with bacterial cells after the autunite equilibrated with the media solution amended with 0 mM, 3 mM 5 mM and 10 mM concentrations of bicarbonate. G968 Arthrobacter cells in the amount of 10{sup 6} cells/mL were injected into the reactors after 27 days, giving time for the autunite to reach steady state. Abiotic non-carbonate controls were kept without bacterial inoculation to provide a control for the biotic samples. Samples of the solution were analyzed for dissolved U(VI) by means of kinetic phosphorescence analyzer KPA-11 (Chemcheck Instruments, Richland, WA). Analysis showed that as [HCO{sub 3}{sup -}] increases, a diminishing trend on the effect of bacteria on autunite leaching is observed. Viability of cells was conducted after 24 hours of cell incubation with the appropriate uranium and bicarbonate concentration treatment. As expected, the cells started to reduce after day 41 due to the nutritional exhaustion of the media. Moreover, viable bacteria accounted for more than 94% in the presence of 10 mM bicarbonate. Experiments showed that despite differences between the G975 and the G968 bacterial strains resistance to U(VI), in the presence of bicarbonate ions they are able to dissolute uranium from autunite mineral at the same capacity. The effect of both bacterial strains on autunite dissolution is reduced as the concentration of bicarbonate increases while the increase in soluble U(VI) concentration induced by G968 and G975 is dwarfed, for larger [HCO{sub 3}{sup -}]. (authors)

54 ENVIRONMENTAL SCIENCES↗

TITAN'S BULK COMPOSITION CONSTRAINED BY CASSINI-HUYGENS: IMPLICATION FOR INTERNAL OUTGASSING

In the present report, by using a series of data gathered by the Cassini-Huygens mission, we constrain the bulk content of Titan's interior for various gas species (CH{sub 4}, CO{sub 2}, CO, NH{sub 3}, H{sub 2}S, Ar, Ne, Xe), and we show that most of the gas compounds (except H{sub 2}S and Xe) initially incorporated within Titan are likely stored dissolved in the subsurface water ocean. CO{sub 2} is likely to be the most abundant gas species (up to 3% of Titan's total mass), while ammonia should not exceed 1.5 wt%. We predict that only a moderate fraction of CH{sub 4}, CO{sub 2}, and CO should be incorporated in the crust in the form of clathrate hydrates. By contrast, most of the H{sub 2}S and Xe should be incorporated at the base of the subsurface ocean, in the form of heavy clathrate hydrates within the high-pressure ice layer. Moreover, we show that the rocky phase of Titan, assuming a composition similar to CI carbonaceous chondrites, is a likely source for the noble gas isotopes ({sup 40}Ar, {sup 36}Ar, {sup 22}Ne) that have been detected in the atmosphere. A chondritic core may also potentially contribute to the methane inventory. Our calculations show that a moderate outgassing of methane containing traces of neon and argon from the subsurface ocean would be sufficient to explain the abundance estimated by the Gas Chromatograph Mass Spectrometer. The extraction process, implying partial clathration in the ice layers and exsolvation from the water ocean, may explain why the {sup 22}Ne/{sup 36}Ar ratio in Titan's atmosphere appears higher than the ratio in carbonaceous chondrites.

79 ASTRONOMY AND ASTROPHYSICS↗

Stone Content Influence on Land Surface Model Simulation of Soil Moisture and Evapotranspiration at Reynolds Creek Watershed

Considerable advancement in spatiotemporal resolution of remote sensing and ground-based measurements has enabled refinement of parameters used in land surface models for simulating surface water fluxes. However, land surface modeling capabilities are still inadequate for accurate representation of subsurface properties and processes, which continue to limit the accuracy of land surface model simulation. Our objective in this study was to examine the performance of the variously parameterized Noah-Multiphysics (Noah-MP) land surface model and to improve simulations of evapotranspiration (ET) and soil moisture dynamics in stony soils using verification from eddy covariance ET and in-situ soil moisture data. Meteorological and eddy covariance data from the Lower Sheep sub-catchment within the Reynolds Creek Experimental Watershed in Southwestern Idaho were employed to drive Noah-MP and to assess simulation results. We evaluated the performance of Noah-MP considering four different scenarios: (1) A one-layer soil profile with Noah-MP default soil hydraulic parameters, followed by five-layer soil profiles using -(2) Noah-MP default soil hydraulic parameters -(3) soil hydraulic parameters derived from a pedotransfer function using field observations, and -(4) hydraulic parameters from (3) which also accounted for stone content in each layer. Each modeling experiment was forced with the same set of initial conditions, atmospheric input and vegetation parameters. Our results indicated that enhanced representation of soil profile properties and stone content information noticeably improve the Noah-MP land surface model simulation of soil moisture content and evapotranspiration.

Land surface models, Soil hydrology, Noah-MP, Evap↗

PFLOTRAN: Reactive Flow & Transport Code for Use on Laptops to Leadership-Class Supercomputers. In: Groundwater Reactive Transport Models

PFLOTRAN, a next-generation reactive flow and transport code for modeling subsurface processes, has been designed from the ground up to run efficiently on machines ranging from leadership-class supercomputers to laptops. Based on an object-oriented design, the code is easily extensible to incorporate additional processes. It can interface seamlessly with Fortran 9X, C and C++ codes. Domain decomposition parallelism is employed, with the PETSc parallel framework used to manage parallel solvers, data structures and communication. Features of the code include a modular input file, implementation of high-performance I/O using parallel HDF5, ability to perform multiple realization simulations with multiple processors per realization in a seamless manner, and multiple modes for multiphase flow and multicomponent geochemical transport. Chemical reactions currently implemented in the code include homogeneous aqueous complexing reactions and heterogeneous mineral precipitation/dissolution, ion exchange, surface complexation and a multirate kinetic sorption model. PFLOTRAN has demonstrated petascale performance using 217 processor cores on problems composed of over 2 billion degrees of freedom. The code is currently being applied to simulate uranium transport at the Hanford 300 Area and CO2 sequestration in deep geologic formations.

carbon sequestration↗

Modeling the Effects of Artificial Drainage on Agriculture-dominated Watersheds using a Fully Distributed Integrated Hydrology Model: Datasets, code, models files

This model-data archive is for a modeling study focused on the effects of artificial drainage on agriculture-dominated watersheds using a fully distributed integrated hydrology model. This study introduced a novel strategy to represent the effects of tile drains and agricultural ditches in a fully distributed basin-scale integrated hydrology model. The numerical experiments in this study reveal the effects of surface and subsurface drainage on various hydrological states and fluxes. The details about the datasets can be found in the "readme" document attached with the dataset.

Agricultural Watersheds↗