Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Moessbauer studies of complex materials: Energy versus time domain

We present a critical comparison between conventional Moessbauer spectroscopy on the one hand and energy and time resolved nuclear resonant scattering on the other hand. The three Moessbauer techniques are evaluated by the characterization of the complex magnetic structure of an Fe{sub 3}Al alloy. It is shown how the different scattering processes and detection schemes, which are involved in the respective configurations, determine the specific strengths of the three techniques and how they are optimally suited for the characterization of materials of varying complexity and reduced sizes.

36 MATERIALS SCIENCE↗

A Dual-Channel, Curved-Crystal Spectrograph for Petawatt Laser, X-Ray Backlighter Source Studies

A dual-channel, curved-crystal spectrograph was designed to measure time-integrated x-ray spectra in the ~1.5 to 2 keV range (6.2–8.2 Å wavelength) from small-mass, thin-foil targets irradiated by the VULCAN petawatt laser focused up to 4 x 10^20 W/cm^2. The spectrograph consists of two cylindrically curved potassium-acid-phthalate crystals bent in the meridional plane to increase the spectral range by a factor of ~10 compared to a flat crystal. The device acquires single-shot x-ray spectra with good signal-to-background ratios in the hard x-ray background environment of petawatt laser-plasma interactions. The peak spectral energies of the aluminum He-alpha and Ly-alpha resonance lines were ~1.8 and ~1.0 mJ/eV sr (~0.4 and 0.25 J/Å sr), respectively, for 220 J, 10 ps laser irradiation.

Theobald, W↗

Study of semi-inclusive deep inelastic (e,e'{pi}{sup {+-}}) production with a polarized {sup 3}He target

The 12 GeV upgrade at Jefferson Lab will open a new era of precision measurement of the Transverse Momentum Dependent parton distribution functions (TMDs) through the Semi-Inclusive Deep-Inelastic Scattering (SIDIS). In this talk, we discussed the projected results on measurements of TMDs using a newly proposed large acceptance solenoid detector together with the standard Hall A polarized {sup 3}He target. The high luminosity and the large acceptance detector will allow for a precise 3-D (x, z and P{sub T}) mapping of azimuthal asymmetries. Furthermore, the full 2{pi} azimuthal angular coverage for the solenoid detector is essential to control the relevant systematic uncertainties in extracting the azimuthal asymmetries. With a 40 cm long transversely polarized {sup 3}He target, a total of 60 days of beam time at a beam current of 15 {mu}A, we can determine tensor charge of d quark to 10% in a model independent way. The extracted Sivers asymmetry will provide important information to understand the correlation between the quark orbital angular momentum and the nucleon spin.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Morphology-dependent optical absorption and conduction properties of photoelectrochemical photocatalysts for H{sub 2} production: A case study

Efficient photoelectrochemical H{sub 2} production by solar irradiation depends not only on the photocatalyst's band gap and its band-edge positions but also on the detailed electronic nature of the bands, such as the localization or delocalization of the band edges and their orbital characteristics. These determine the carrier transport properties, reactivity, light absorption strength, etc. and significantly impact the material's efficiency as a photoconverter. The localization or delocalization of the band edges may arise either due to the orbital nature of the bands or the structural morphology of the material. A recent experimental report on a photocatalyst based on s/p orbitals showed very poor performance for H{sub 2} production despite the delocalized nature of the s/p bands as compared to the d-bands of transition metal oxides. It is then important to examine whether this poor performance is inherent to these materials or rather arises from some experimental limitations. A theoretical analysis by first-principle methods is well suited to shed light on this question.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of nucleon resonances at EBAC-JLab

We present the dynamical origin of the P{sub 11} nucleon resonances resulting from a dynamical coupled-channels (DCC) analysis of meson production reactions off a nucleon target, which is conducted at Excited Baryon Analysis Center (EBAC) of Jefferson Lab. Two resonance poles are found in the energy region where the Roper resonance P{sub 11}(1440) was identified. Furthermore, the two resonance poles and the next higher resonance pole corresponding to P{sub 11}(1710) are found to originate from a single bare state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A computational study of x-ray emission from laser-irradiated Ge-doped foams

New advances in fabrication of low-density high-Z-doped foams have opened new windows on understanding how materials that are not in local thermodynamic equilibrium (LTE) are heated and radiate. Simulations are discussed in this paper of the x-ray spectral emissions from laser-irradiated very low-density Ge-doped silica aerogel targets using a two-dimensional radiation-hydrodynamics code incorporating a modern non-LTE superconfiguration atomic model. Details of the computational model are presented, and it is shown that, for the long-scale-length, subcritical-density, approx2-3 keV electron temperature plasmas created in experiments at the Omega laser facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)], the simulations provide a close match to both the measured Ge L-shell emission (approx1-1.5 keV) and the measured Ge K-shell emission (approx10-11 keV), but only by accounting properly for nonlocal thermal conduction. The older average-atom atomic model is shown to be inadequate for these non-LTE plasmas.

36 MATERIALS SCIENCE↗

Experimental Background Studies in the Two Photon Exchange (TPE) Experiment at Jefferson Lab

This work is based on the improvement of an existing simulation for the two photon exchange (TPE) experiment at Jefferson Lab developed within the GEANT4 framework. This experiment will determine the ratio of the positron-proton elastic scattering cross section and the electron-proton elastic scattering cross section with high precision. To accomplish this measurement requires the use of a variety of devices and complex arrangements, creating background particles that manage to reach the detector system (CLAS). A number of test runs have identified the sources of background in the detector guided by previous simulations. Even so, the remaining background can be reduced considerably by the microscopic identification and locating of the background sources performed by our new simulation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coherent optical phonon spectroscopy studies of femtosecond-laser modified Sb{sub 2}Te{sub 3} films

We performed time-resolved reflectivity measurements to monitor changes in optical phonon modes in Sb{sub 2}Te{sub 3} thin films under femtosecond laser irradiation. We found that a phonon mode at 3.64 THz appears after high-fluence laser irradiation, in addition to the phonon modes of Sb{sub 2}Te{sub 3}. We determined that the additional mode is due to Te segregation as a result of laser-induced decomposition of the Sb{sub 2}Te{sub 3} film. This experiment clearly illustrates the irreversible effects of femtosecond laser irradiation during the measurement of coherent optical phonon dynamics in Sb{sub 2}Te{sub 3}.

36 MATERIALS SCIENCE↗

Study of near-stability nuclei populated as fission fragments in heavy-ion fusion reactions

Examples are presented to illustrate the power of prompt {gamma}-ray spectroscopy of fission fragments from compound nuclei with A{approx}200 formed in fusion-evaporation reactions in experiments using the Gammasphere Ge-detector array. Complementary methods, such as Coulomb excitation and deep-inelastic processes, are also discussed. In other cases (n,xn{gamma}) reactions on stable isotopes have been used to establish neutron excitation functions for {gamma}-rays using a pulsed 'white'-neutron source, coupled to a high-energy-resolution germanium-detector array. The excitation functions can unambiguously assign {gamma}-rays to a specific reaction product. Results from all these methods bridge the gaps in the systematics of high-spin states between the neutron-deficient and neutron-rich nuclei. Results near shell closures should motivate new shell model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Synchrotron radiation infrared microscopic study of non-bridging oxygen modes associated with laser-induced breakdown of fused silica

Nanosecond pulse laser-driven optical breakdown at SiO{sub 2} surfaces as probed by synchrotron-based Fourier transform infrared (SRFTIR) and photoluminescence (PL) microscopies is presented. SRFTIR mapping of laser damage identified localized non-bridging Si-O vibrational modes at {approx}950 cm{sup -1} which became stiffer as 355 nm laser pulse lengths were increased from 5 to 20 ns. The bridging Si-O-Si transverse optic mode frequency varied significantly across damaged regions indicating a wide range of average bond angles, softening slightly with increasing pulse length. 355 nm-excited PL images of laser modified regions could be directly correlated with the structural modifications identified through SRFTIR.

36 MATERIALS SCIENCE↗

A study of H+ production using metal hydride and other compounds by means of laser ion source

A laser ion source can provide wide variety of ion beams from solid target materials, however, it has been difficult to create proton beam efficiently. We examined capability of proton production using beeswax, polyethylene, and metal hydrides (MgH2 and ZrH2) as target materials. The results showed that beeswax and polyethylene could not be used to produce protons because these targets are transparent to the laser wavelength of 1064 nm. On the other hand, the metal hydrides could supply protons. Although the obtained particle numbers of protons were less than those of the metal ions, the metal hydrides could be used as a target for proton laser ion source.

08 HYDROGEN↗

Hard x-ray monochromator with milli-electron volt bandwidth for high-resolution diffraction studies of diamond crystals

We report on design and performance of a high-resolution x-ray monochromator with a spectral bandwidth of {Delta}E{sub X}{approx_equal} 1.5 meV, which operates at x-ray energies in the vicinity of the backscattering (Bragg) energy E{sub H} = 13.903 keV of the (008) reflection in diamond. The monochromator is utilized for high-energy-resolution diffraction characterization of diamond crystals as elements of advanced x-ray crystal optics for synchrotrons and x-ray free-electron lasers. The monochromator and the related controls are made portable such that they can be installed and operated at any appropriate synchrotron beamline equipped with a pre-monochromator.

43 PARTICLE ACCELERATORS↗

Thermal lens study of thermo-optical properties and concentration quenching of Er{sup 3+}-doped lead pyrophosphate-based glasses

In this work, we have used the thermal lens technique combined with conventional spectroscopy to characterize the thermo-optical properties of Er{sup 3+}-doped lead pyrophosphate-based glasses. More precisely, we have investigated and quantified experimentally the fluorescence quantum efficiencies of the Er{sup 3+} levels, and we describe the role of concentration quenching effects. The fluorescence quantum efficiency of the {sup 4}I{sub 13/2} level is very high when compared to other phosphate glasses, while that of the green-coupled levels is very small. Other important photonic materials parameters, such as the thermal diffusivity and temperature coefficient of the optical path length change, were obtained and compared with those of other glass systems. The cumulative results obtained here for the Er-doped lead pyrophosphate glass show that this material is a good candidate for photonic applications with a characteristic Er{sup 3+} infrared emission around 1550 nm.

36 MATERIALS SCIENCE↗