Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strong”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Strong scintillations in astrophysics. 4. Cross-correlation between different frequencies and finite bandwidth effects

The cross correlation of the intensity fluctuations between different frequencies and finite bandwidth effects on the intensity correlations based on the Markov approximation were calculated. Results may be applied to quite general turbulence spectra for an extended turbulent medium. Calculations of the cross-correlation function and of finite bandwidth effects are explicitly carried out for both Gaussian and Kolmogorov turbulence spectra. The increases of the correlation scale of intensity fluctuations are different for these two spectra and the difference can be used to determine whether the interstellar turbulent medium has a Gaussian or a Kolmogorov spectrum.

Lee, L. C.↗

Her X-1 spectral evidence for a strong magnetic field

The steep high energy cutoff observed in the spectrum for Her X-1 is analyzed in terms of the severely modified Thomson scattering that dominates the radiative transfer in a highly magnetized plasma near the surface of a neutron star. The data are shown to indicate a field of about 10 to the 13th power G near the magnetic poles and the stopping of accreting matter by nuclear collisions in the neighboring plasma.

Boldt, E. A.↗

Strong scintillations in astrophysics. II - A theory of temporal broadening of pulses

A theory of temporal broadening of pulses propagating in a turbulent medium is developed on the basis of the Markov approximation. The theory may be applied to quite general turbulence spectra and to thin or thick turbulent regions. Since the basis of the theory is the wave equation, no reliance is placed on geometrical optics and no assumptions are made about the scattered angular spectrum. The observed smearing is found to be the combination of three effects: the dispersion effect, the pure refractive effect, and the diffraction effect. The last of these dominates for typical pulsar parameters. Pulse shapes are calculated for both Gaussian and Kolmogorov turbulence spectra and it is shown how these scale with the various turbulence parameters.

Lee, L. C.↗

Flux limit on cosmic ray acceleration by strong spherical pulsar waves

The study investigates the acceleration of cosmic rays by superrelativistic plasma waves. The pulsar wave field imposed upon the particles is that of a magnetic dipole wave including azimuthal dependence and near field terms. The refractive index of the plasma is assumed to be constant everywhere. Two distinct zones appear: in the near zone spherical effects dominate, particles may be decelerated; in the far zone the results for the motion differ noticeably from the vacuum case. From a WBK-like treatment for a spherical S wave, it is concluded that for a wave solution to be valid even near the light cylinder, the wave can carry a sufficiently small particle flux.

Asseo, E.↗

Strong scintillations in astrophysics. IV - Cross-correlation between different frequencies and finite bandwidth effects

The cross-correlation of the intensity fluctuations between different frequencies and finite-bandwidth effects on the intensity correlations are calculated based on the Markov approximation. The results may be applied to quite general turbulence spectra for an extended turbulent medium. Calculations of the cross-correlation function and of finite-bandwidth effects are explicitly carried out for both Gaussian and Kolmogorov turbulence spectra. The increases of the correlation scale of intensity fluctuations are different for these two spectra, and the difference can be used to determine whether the interstellar turbulent medium has a Gaussian or a Kolmogorov spectrum.

Lee, L. C.↗

Strong lightweight battery housing

Unit holds fifteen cells weighing 1.3 kilogram each, withstands vibration continuously, can be pressurized to 25 psig (175 x 1000 N/M to the 2nd power). Unit offers potential of low-cost fabrication and increased accessibility to enclosed battery cells. Device may double as utility chest for tool storage and other items.

Perreault, W. T.↗

Tough strong iron alloys for cryogenic service

Series of alloys with minor additions of reactive metals possesses outstanding strength and toughness at cryogenic temperatures. Effective metal additons include aluminum, niobium, titanium, and vanadium. Strengthening of series is achieved by thermomechanical processing and by precipitate strengthening while maintaining high level of toughness. Possible applications include liquefied natural-gas storage and transmission, structural members in superconducting machinery, and welding rod for other alloys such as nine nickel steels.

Stephens, J. R.↗

Optimization of confinement in a toroidal plasma subject to strong radial electric fields

A preliminary report on the identification and optimization of independent variables which affect the ion density and confinement time in a bumpy torus plasma is presented. The independent variables include the polarity, position, and number of the midplane electrode rings, the method of gas injection, and the polarity and strength of a weak vertical magnetic field. Some characteristic data taken under condition when most of the independent variables were optimized are presented. The highest value of the electron number density on the plasma axis is 3.2 x 10 to the 12th power/cc, the highest ion heating efficiency is 47 percent, and the longest particle containment time is 2.0 milliseconds.

Roth, J. R.↗

Cryogenic Properties of a New Tough-Strong Iron Alloy

A program was undertaken to develop an iron-base alloy having a fracture toughness of 220 MPa. m superscript 1/2 with a corresponding yield stress of 1.4 GPa (200 ksi) at-196 C. An Fe-12Ni alloy was selected as the base alloy. Factors considered included reactive metal additions, effects of interstitial impurities, strengthening mechanisms, and weldability. The goals were met in an Fe-12Ni-0.5Al alloy strengthened by thermomechanical processing or by precipitate strengthening with 2 percent Cu. The alloy is weldable with the weld metal and heat affected zone in the postweld annealed condition having toughness equivalent to the base alloy.

Stephens, J. R.↗

The relative diffusion of strong magnetic fields and tenuous gases

General equations are given for treating the diffusion of a magnetic field in a fluid with electrical conductivity and a resistive diffusion coefficient. Consequences of nonnegligible gas motion are investigated by considering the one-dimensional problem where a tenuous isothermal gas with pressure expressed as a function of x-coordinate and time is enmeshed in a magnetic field in the y-direction. Approximate equations are obtained for the case of weak fluctuations in gas or field pressure, and the properties of a nonlinear diffusion equation are illustrated with the example of an initial thin slab of gas confined by a uniform field on either side. The advance of a gas front into a nonvanishing gas density is illustrated by using the progressive wave solution. Application of the results to the evolution of streamers and filaments observed in the solar corona is briefly discussed

Parker, E. N.↗

Optimization of confinement in a toroidal plasma subject to strong radial electric fields

The toroidal ring of plasma contained in the NASA Lewis Bumpy Torus facility may be biased to positive or negative potentials approaching 50 kV by applying dc voltages of the respective polarity to 12 or fewer midplane electrode rings. The radial electric fields, which are responsible for raising the ions to high energies by E x B/B-squared drift, then point out of or into the plasma. A preliminary report is given on the identification and optimization of independent variables which affect the ion density and confinement time in the Bumpy Torus plasma. The independent variables include the polarity, position, and number of the midplane electrode rings, the method of gas injection, and the polarity and strength of a weak vertical magnetic field. Some characteristic data taken under conditions where most of the independent variables were optimized are presented. The highest value of the electron number density on the plasma axis is 3.2 trillion per cu cm, the highest ion heating efficiency is 47%, and the longest particle containment time is 2.0 msec.

Roth, J. R.↗

Effects of entrained water and strong turbulence on afterburning within solid rocket motor plumes

During the first few seconds of the space shuttle trajectory, the solid rocket boosters will be in the proximity of the launch pad. Because of the launch pad structures and the surface of the earth, the turbulent mixing experienced by the exhaust gases will be greatly increased over that for the free flight situation. In addition, a system will be present, designed to protect the lifting vehicle from launch structure vibrations, which will inject quantities of liquid water into the hot plume. The effects of these two phenomena on the temperatures, chemical composition, and flow field present in the afterburning solid rocket motor exhaust plumes of the space shuttle were studied. Results are included from both a computational model of the afterburning and supporting measurements from Titan 3 exhaust plumes taken at Kennedy Space Center with infrared scanned radiometers.

Gomberg, R. I.↗

Analysis of strong-interaction dynamic stall for laminar flow on airfoils

A compressible Navier-Stokes solution procedure is applied to the flow about an isolated airfoil. Two major problem areas were investigated. The first area is that of developing a coordinate system and an initial step in this direction has been taken. An airfoil coordinate system obtained from specification of discrete data points developed and the heat conduction equation has been solved in this system. Efforts required to allow the Navier-Stokes equations to be solved in this system are discussed. The second problem area is that of obtaining flow field solutions. Solutions for the flow about a circular cylinder and an isolated airfoil are presented. In the former case, the prediction is shown to be in good agreement with data.

Gibeling, H. J.↗

Dynamic stall: An example of strong interaction between viscous and inviscid flows

A study was done of the phenomena concerning profiles in dynamic stall configuration, and more specially those related to pitch oscillations. The most characteristic experimental results on flow separations with a vortex character, and their repercussions on local pressures and total forces were analyzed. Some aspects of the methods for predicting flows with the presence (or not) of boundary layer separation are examined, as well as the main simplified methods available to date for the calculation of total forces in such configurations.

Philippe, J. J.↗

Cryogenic properties of a new tough-strong iron alloy

A program was undertaken to develop an iron-base alloy having a fracture toughness of 220 MPa-sq root meters with a corresponding yield stress of 1.4 GPa (200 ksi) at -196 C. An Fe-12Ni alloy was selected as the base alloy. Factors considered include reactive metal additions, effects of interstitial impurities, strengthening mechanisms, and weldability. The goals of this program were met in an Fe-12Ni-0.5Al alloy strengthened by thermomechanical processing or by precipitate strengthening with 2 percent Cu. The alloy is weldable with the weld metal and heat affected zone in the post-weld annealed condition having toughness equivalent to the base alloy.

Stephens, J. R.↗