Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selective separators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Slow Auger Recombination of Trapped Excitons Enables Efficient Multiple Electron Transfer in CdS–Pt Nanorod Heterostructures

We report solar-to-fuel conversion reaction often requires multiple proton-coupled electron transfer (PCET) processes powered by the energetic electrons and/or holes generated by the absorption of multiple photons. The effective coupling of multiple electron transfer from the light absorber with the multiple PCET reactions at the catalytic center is one of the key challenges in efficient and selective conversion of solar energy to chemical fuels. In this paper, we examine the dynamics of multiple electron transfer in quantum confined CdS nanorods with a Pt tip, in which the CdS rod functions as the light absorber and the Pt tip the catalytic center. By excitation-fluence-dependent transient absorption spectroscopic measurements, we show that the multiexciton Auger recombination rate in CdS rods follows a carrier-collision model, k n A = n 2 (n – 1)/4k 2 A , with a biexciton lifetime (1/k 2 A ) of 2.0 ± 0.2 ns. In CdS–Pt nanorods, electron transfer kinetics from the CdS conduction band edge to the Pt show negligible dependence on the excitation fluence, occurring with a half-life time of 5.6 ± 0.6 ps. The efficiency of multiple exciton dissociation by multiple electron transfer to Pt decreases from 100% in biexciton states to ~41% at 22 exciton state due to the competition with Auger recombination. The half-lifetime of the n-charge separated state recombination (with n electrons in the Pt and n holes in the CdS) decreases from 10 μs in the single charge separated state to 42 ns in nine charge separated states. Our findings suggest the possibility of driving multielectron photocatalytic reactions under intense illumination and controlling product selectivity through multielectron transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geological Disposal Concept Selection Aligned with a Voluntarism Process - 13538

The UK's Radioactive Waste Management Directorate (RWMD) is currently at a generic stage in its implementation programme. The UK site selection process is a voluntarist process and, as yet, no communities have decided to participate. RWMD has set out a process to describe how a geological disposal concept would be selected for the range of higher activity wastes in the UK inventory, including major steps and decision making points, aligned with the stages of the UK site selection process. A platform of information is being developed on geological disposal concepts at various stages of implementation internationally and, in order to build on international experience, RWMD is developing its approach to technology transfer. The UK has a range of different types of higher activity wastes with different characteristics; therefore a range of geological disposal concepts may be needed. In addition to identifying key aspects for considering the compatibility of different engineered barrier systems for different types of waste, RWMD is developing a methodology to determine minimum separation distances between disposal modules in a co-located geological disposal facility. RWMD's approach to geological disposal concept selection is intended to be flexible, recognising the long term nature of the project. RWMD is also committed to keeping alternative radioactive waste management options under review; an approach has been developed and periodic reviews of alternative options will be published. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrochemically modulated separations for material accountability measurements

A method for the accurate and timely analysis of accountable materials is critical for safeguards measurements in nuclear fuel reprocessing plants. Non-destructive analysis (NDA) methods, such as gamma spectroscopy, are desirable for their ability to produce near real-time data. However, the high gamma background of the actinides and fission products in spent nuclear fuel limits the use of NDA for real-time online measurements. A simple approach for at-line separation of materials would facilitate the use of at-line detection methods. A promising at-line separation method for plutonium and uranium is electrochemically modulated separations (EMS). Using an electrochemical cell with an anodized glassy carbon electrode, Pu and U oxidation states can be altered by applying an appropriate voltage. Because the affinity of the actinides for the electrode depends on their oxidation states, selective deposition can be turned “on” and “off” with changes in the applied target electrode voltage. A high surface-area cell was designed in house for the separation of Pu from spent nuclear fuel. The cell is shown to capture over 1 µg of material, increasing the likelihood for gamma spectroscopic detection of Pu extracted from dissolver solutions. The large surface area of the electrode also reduces the impact of competitive interferences from some fission products. Flow rates of up to 1 mL min-1 with >50% analyte deposition efficiency are possible, allowing for rapid separations to be effected. Results from the increased surface-area EMS cell are presented, including dilute dissolver solution simulant data.

36 MATERIALS SCIENCE↗

Web-GIS oriented systems viability for municipal solid waste selective collection optimization in developed and transient economies

Highlights: ► As an appropriate solution for MSW management in developed and transient countries. ► As an option to increase the efficiency of MSW selective collection. ► As an opportunity to integrate MSW management needs and services inventories. ► As a tool to develop Urban Mining actions. - Abstract: Municipal solid waste management is a multidisciplinary activity that includes generation, source separation, storage, collection, transfer and transport, processing and recovery, and, last but not least, disposal. The optimization of waste collection, through source separation, is compulsory where a landfill based management must be overcome. In this paper, a few aspects related to the implementation of a Web-GIS based system are analyzed. This approach is critically analyzed referring to the experience of two Italian case studies and two additional extra-European case studies. The first case is one of the best examples of selective collection optimization in Italy. The obtained efficiency is very high: 80% of waste is source separated for recycling purposes. In the second reference case, the local administration is going to be faced with the optimization of waste collection through Web-GIS oriented technologies for the first time. The starting scenario is far from an optimized management of municipal solid waste. The last two case studies concern pilot experiences in China and Malaysia. Each step of the Web-GIS oriented strategy is comparatively discussed referring to typical scenarios of developed and transient economies. The main result is that transient economies are ready to move toward Web oriented tools for MSW management, but this opportunity is not yet well exploited in the sector.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

What's on the menu? Examining native apex‐ and invasive meso‐predator diets to understand impacts on ecosystems

Abstract Understanding how carnivores impact ecological communities is essential for guiding effective management actions and conserving biodiversity. Quantifying predators' diets, including prey selectivity, allows for the assessment of the relative effects native and invasive predators may have on prey populations. In Australia, populations of a native, terrestrial apex predator, the dingo Canis dingo/C. familiaris , and introduced and invasive subordinate mesopredators, the European red fox Vulpes vulpes and feral cat Felis catus , co‐occur, but there is limited understanding of their relative impacts on native and invasive prey in different ecosystems. To assess the possible effects of dingoes, foxes and cats on prey, we examined their diet and prey selectivity across a ~10,000 km 2 semi‐arid mallee ecosystem. Using macroscopic scat analysis, we identified strong dietary niche separation. Larger‐bodied dingoes primarily consumed large marsupial herbivores, whereas foxes and cats primarily consumed smaller prey, including introduced and native rodents and birds. Foxes had the broadest diet, and the greatest dietary overlap with cats ( = 0.81), compared with dingoes ( = 0.50) or between dingoes and cats ( = 0.36). Livestock were identified in 2% of dingo and 7% of fox scats. Cats and foxes consumed more than 15 times the volume of small native mammals compared with dingoes, including threatened species such as fat‐tailed dunnarts Sminthopsis crassicaudata . Cats and foxes also selectively consumed small mammals relative to their estimated availability and consumed fewer large mammals. In contrast, dingoes consumed fewer birds and more echidnas relative to their availability. Our results suggest limited intraguild competition within this semi‐arid ecosystem, as dingoes are primarily exerting top‐down pressure on large herbivores, whereas invasive mesopredators are disproportionately impacting smaller prey, including threatened native mammals. Practical implication . Our findings suggest that ongoing conservation management of dingoes, red foxes and feral cats must consider the variation in diets, impacts on prey and ecological roles of these different predator species, and avoid indiscriminate lethal control methods. Quantifying actual, rather than assumed, impacts of predators on threatened native species, large herbivores and livestock is essential to achieve effective and integrated ecosystem management.

Mason, Rachel T. [School of Life and Environmental↗

Ultraselective sequestration of Li + and Mg 2+ from brines via a reusable polyoxoniobate-based ion sponge

Lithium (Li) and magnesium (Mg) are designated as critical mineral materials (CMM) due to their essential roles in clean energy technologies. However, extracting high-purity Li + from brine remains a formidable challenge owing to the presence of Mg 2+ , a physicochemical similar ion that often exists in excess. Here, we introduce a polyoxoniobate-based “Mg-PONb sponge” that enables ultraselective and rapid Li + /Mg 2+ separation across an exceptionally broad range of Mg/Li ratios (0.02 to 200.63). This framework achieves >99.9% Mg 2+ removal with negligible Li + loss in under 1 min, yielding Li + /Mg 2+ selectivity values exceeding 5000. The sponge demonstrates excellent recyclability, maintaining >99% Mg 2+ rejection and Li + permeability across five regeneration cycles without structural degradation. Mechanistic investigations reveal that selective Mg 2+ capture originates from strong coordination with terminal oxygens on the PONb cluster, driving rapid formation of porous Mg-PONb frameworks. This work presents a generalizable, scalable strategy for Li + /Mg 2+ separation and offers a sustainable path toward enhanced Li and Mg recovery from complex brine sources.

Chen, Linfeng [Lawrence Berkeley National Laborato↗

Uptake selectivity for different types of zeolites in the presence of boric acid - 15244

The development of selective adsorbents is very important subject for the effective multi-nuclide decontamination related to the severe accident of Fukushima NPP-1. Many removal methods have been developed to separate nuclide from decontaminated solutions containing multi-nuclide so far. From the standpoint of cost efficiency, stability for usage and safety handling, the decontamination methods using inorganic adsorbents are one of the most effective methods for the selective decontamination system. Thus, many researches related to inorganic adsorbents have been carried out after the accident; actually, in Fukushima NPP-1, zeolites are used to remove radioactive nuclides from decontaminated water as a main adsorbent in the circulating injection cooling system. However, the adsorption characteristics of zeolites in the presence of boric acid have not been clarified in detail. As for the decontamination in PWR[1], the adsorption properties should be examined in the presence of highly concentrated boric acid. Based on this background, the final objective of this study is to develop the decontamination methods in PWR-NPP by using various zeolites for multi-nuclide. In this study, the adsorption properties for eight kinds of zeolites (Zeolite A, Zeolite X, Zeolite Y, Zeolite L, Chabazite, Synthetic Mordenite, Natural Mordenite and Clinoptilolite) are evaluated in the presence of boric acid and seawater. The present study deals with (1) selective adsorption properties for single nuclide ion ({sup 137}Cs{sup +}, {sup 60}Co{sup 2+}, {sup 85}Sr{sup 2+} and {sup 152}Eu{sup 3+}), (2) preparation of Ag-loaded Natural Mordenite (Ag-NM) and uptake properties of I- ions, and (3) multi-nuclide decontamination properties of 26 elements (typical elements in Advanced Liquid Processing System (ALPS) in Fukushima NPP-1) for the above zeolites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Determination of transition metal ions in fossil fuel associated wastewaters using chelation ion chromatography

Here, this study outlines the development and subsequent validation of a method using chelation ion chromatography (CIC) pretreatment followed by traditional ion chromatography (IC) and post column UV/vis detection to measure transition metals in fossil fuel wastewaters, such as oil & gas (O&G) brines and coal mine drainage (CMD) waters. Measurement of transition metals is often an important characterization step in the research of environmental and energy systems. IC represents one way to measure these metals with the advantages of being versatile, simple and relatively low cost compared to other analytical methods. However, high concentrations of alkali and alkaline earth metals present in fossil fuel wastewaters will decrease IC detectability of transition metals in these waters. In this study, a CIC method was developed for the analysis of transition metal ions (Fe 3+ , Cu 2+ , Ni 2+ , Zn 2+ , Co 2+ , Mn 2+ , and Fe 2+ ) in fossil fuel associated wastewaters such as Appalachian CMD and O&G wastewaters from the Permian and Bakken shale basins in the United States. CIC system incorporated an on-line chelator column (e.g., the MetPac CC-1) with high selectivity for transition metals over alkali and alkaline earth metals for salt matrix removal prior to transition metal separation and detection. Additional method developments also included acidifying all samples to 2% v/v HCl and using gradient elution rather than isocratic. The recoverability of transition metals in simple salt solutions commonly found in CMD and brine samples (e.g. NaCl, Na 2 SO 4 , CaCl 2 ) using CIC was evaluated and compared to that using traditional IC. Our results found that the CIC system significantly improved transition metal recoveries for samples in 10,000 mg/L CaCl 2 matrix, reaching 87%-108% recovery for all analytes, as opposed to 2-323% recovery in traditional IC. The limits of detection in this study achieved 10.09 – 161.2 μg/L, comparable to reported values in similar IC studies. The developed method was also verified with certified water samples, resulting in 89% - 111% recoveries in samples with higher analyte concentrations (i.e. >4x the LoDs). The developed method achieved 87% -112% recoveries for most analytes in CMD samples and 72%-138% recoveries for Bakken shale samples, relative to ICP-MS values. Overall, the current IC method can be a very good screening tool for fast and cheap analysis for transition metals at mg/L level, to facilitate selection of samples for more detailed ICP-MS analysis.

01 COAL, LIGNITE, AND PEAT↗

SEARCHING FOR NEW YELLOW SYMBIOTIC STARS: POSITIVE IDENTIFICATION OF StHα63

Yellow symbiotic stars are useful targets for probing whether mass transfer has happened in their binary systems. However, the number of known yellow symbiotic stars is very scarce. We report spectroscopic observations of five candidate yellow symbiotic stars that were selected by their positions in the 2MASS (J − H) versus (H − K{sub s}) diagram and which were included in some emission-line catalogs. Among the five candidates, only StHα63 is identified as a new yellow symbiotic star because of its spectrum and its position in the [TiO]{sub 1}–[TiO]{sub 2} diagram, which indicates a K4–K6 spectral type. In addition, the derived electron density (∼10{sup 8.4} cm{sup −3}) and several emission-line intensity ratios provide further support for that classification. The other four candidates are rejected as symbiotic stars because three of them actually do not show emission lines and the fourth one only Balmer emission lines. We also found that the WISE W3–W4 index clearly separates normal K-giants from yellow symbiotic stars and therefore can be used as an additional tool for selecting candidate yellow symbiotic stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhanced rare-earth separation with a metal-sensitive lanmodulin dimer

Technologically critical rare-earth elements are notoriously difficult to separate, owing to their subtle differences in ionic radius and coordination number. The natural lanthanide-binding protein lanmodulin (LanM) is a sustainable alternative to conventional solvent-extraction-based separation. Here we characterize a new LanM, from Hansschlegelia quercus (Hans-LanM), with an oligomeric state sensitive to rare-earth ionic radius, the lanthanum(III)-induced dimer being >100-fold tighter than the dysprosium(III)-induced dimer. X-ray crystal structures illustrate how picometre-scale differences in radius between lanthanum(III) and dysprosium(III) are propagated to Hans-LanM’s quaternary structure through a carboxylate shift that rearranges a second-sphere hydrogen-bonding network. Comparison to the prototypal LanM from Methylorubrum extorquens reveals distinct metal coordination strategies, rationalizing Hans-LanM’s greater selectivity within the rare-earth elements. Finally, structure-guided mutagenesis of a key residue at the Hans-LanM dimer interface modulates dimerization in solution and enables single-stage, column-based separation of a neodymium(III)/dysprosium(III) mixture to >98% individual element purities. This work showcases the natural diversity of selective lanthanide recognition motifs, and it reveals rare-earth-sensitive dimerization as a biological principle by which to tune the performance of biomolecule-based separation processes.

36 MATERIALS SCIENCE↗

Super-resolution imaging reveals resistance to mass transfer in functionalized stationary phases

Chemical separations are costly in terms of energy, time, and money. Separation methods are optimized with inefficient trial-and-error approaches that lack insight into the molecular dynamics that lead to the success or failure of a separation and, hence, ways to improve the process. We perform super-resolution imaging of fluorescent analytes in five different commercial liquid chromatography materials. Unexpectedly, we observe that chemical functionalization can block more than 50% of the material’s porous interior, rendering it inaccessible to small-molecule analytes. Only in situ imaging unveils the inaccessibility when compared to the industry-accepted ex situ characterization methods. Selectively removing some of the functionalization with solvent restores pore access without substantially altering the single-molecule kinetics that underlie the separation and agree with bulk chromatography measurements. Our molecular results determine that commercial “fully porous” stationary phases are over-functionalized and provide an alternative avenue to characterize and direct separation material design from the bottom-up.

Science & Technology - Other Topics↗

Effect of Viscosity of a Deep Eutectic Solvent on CO 2 Capture Performance in an Energy-Efficient Membrane Contactor-Based Process

Greenhouse gas contributions to climate change have driven intense interest in the separation of CO 2 from wet flue gas streams. Deep eutectic solvents (DESs) are an emerging class of highly selective CO 2 absorbents. A prototypical DES, reline, is a mixture of choline chloride and urea. Reline is a thermally stable, nontoxic, and biodegradable solvent with negligible volatility and is inexpensive. We demonstrate a scalable and energy-efficient hollow fiber membrane contactor (HFMC)-based process using a green solvent for CO 2 capture. This process uses reline in HFMC to provide close interfacial interactions and contact between DES and CO 2 . This approach overcomes the disadvantages associated with direct absorption in DES and could potentially be applied to a variety of solvent-based CO 2 capture methods. Commercial, low-cost polymer hollow fiber membranes were evaluated for the capture of CO 2 with reline. From a mixed gas containing N 2 and CO 2 , the DES-based HFMC separated CO 2 with a purity of 97 mol %. The effect of the viscosity of reline on the CO 2 capture performance was investigated by adding water to the reline. The addition of water to reline significantly reduced its viscosity, which led to a permeate flux of 170 mmol/(m 2 ·h) at 35 °C, 4 bar, and 60 wt % water in solvent, which was approximately 8 times higher than that of the pure reline in the membrane contactor system. In situ Fourier transform infrared spectroscopy and nuclear magnetic resonance (NMR) revealed that reline absorbs CO 2 by physical absorption without forming new chemical compounds and that CO 2 separation by reline occurs via the pressure swing mechanism. This research provides fundamental insights about green physical solvent-based separation processes and a pathway toward industrial deployment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of Corrosion Behavior of Oil Gathering Facilities with Co{sub 2} Flooding In Low-Permeability Oilfields

Carbon dioxide (CO{sub 2}) gas flooding for enhancement of oil recovery is known to face challenges such as corrosion and scaling of oil-gathering facilities and environmental pollution. The corrosion behavior of the gathering facilities must be studied to select the optimum measures for protecting them from the corrosive effect of CO{sub 2}. Surface corrosion of the separator, a key problem with using CO{sub 2}, is evaluated in the present work. The corrosion characteristics, corrosion rate, and corrosion products in different functional areas of the facility were determined by the weight-loss method, scanning electron microscopy (SEM), and x-ray diffraction (XRD) analysis. The results indicate that pitting corrosion is the main characteristic of Fe-360 A steel facilities and that the average corrosion rate in vulnerable areas can reach 0.1358 mm/yr with formation of Fe{sub 2}O{sub 3} and FeS. The combined effects of contact time and CO{sub 2} volume in conjunction with the activity of sulfate-reducing bacteria influence the corrosion kinetics and mechanism of Fe-360 A steel. The results are of great significance for minimizing corrosion using chemical inhibition and proper selection of materials that come into contact with CO{sub 2}.

36 MATERIALS SCIENCE↗

Unique Helicase Determinants in the Essential Conjugative TraI Factor from Salmonella enterica Serovar Typhimurium Plasmid pCU1

The widespread development of multidrug-resistant bacteria is a major health emergency. Conjugative DNA plasmids, which harbor a wide range of antibiotic resistance genes, also encode the protein factors necessary to orchestrate the propagation of plasmid DNA between bacterial cells through conjugative transfer. Successful conjugative DNA transfer depends on key catalytic components to nick one strand of the duplex DNA plasmid and separate the DNA strands while cell-to-cell transfer occurs. The TraI protein from the conjugative Salmonella plasmid pCU1 fulfills these key catalytic roles, as it contains both single-stranded DNA-nicking relaxase and ATP-dependent helicase domains within a single, 1,078-residue polypeptide. In this work, we unraveled the helicase determinants of Salmonella pCU1 TraI through DNA binding, ATPase, and DNA strand separation assays. TraI binds DNA substrates with high affinity in a manner influenced by nucleic acid length and the presence of a DNA hairpin structure adjacent to the nick site. TraI selectively hydrolyzes ATP, and mutations in conserved helicase motifs eliminate ATPase activity. Surprisingly, the absence of a relatively short (144-residue) domain at the extreme C terminus of the protein severely diminishes ATP-dependent strand separation. Collectively, these data define the helicase motifs of the conjugative factor TraI from Salmonella pCU1 and reveal a previously uncharacterized C-terminal functional domain that uncouples ATP hydrolysis from strand separation activity.

59 BASIC BIOLOGICAL SCIENCES↗

Inducing Order from Disordered Copolymers: On Demand Generation of Triblock Morphologies Including Networks

Disordered block copolymers are generally impractical in nanopatterning applications due to their inability to self-assemble into well-defined nanostructures. However, inducing order in low molecular weight disordered systems permits the design of periodic structures with smaller characteristic sizes. Here, we have induced nanoscale phase separation from disordered triblock copolymer melts to form well-ordered lamellae, hexagonally packed cylinders, and a triply periodic gyroid network structure, using a copolymer/homopolymer blending approach, which incorporates constituent homopolymers into selective block domains. This versatile blending approach allows one to precisely target multiple nanostructures from a single disordered material and can be applied to a wide variety of triblock copolymer systems for nanotemplating and nanoscale separation applications requiring nanoscale feature sizes and/or high areal feature densities.

Tureau, Maëva S.↗

Multiphase Flow Modeling of Biofuel Production Processes

As part of the Idaho National Laboratory's (INL's) Secure Energy Initiative, the INL is performing research in areas that are vital to ensuring clean, secure energy supplies for the future. The INL Hybrid Energy Systems Testing (HYTEST) Laboratory is being established to develop and test hybrid energy systems with the principal objective to safeguard U.S. Energy Security by reducing dependence on foreign petroleum. HYTEST involves producing liquid fuels in a Hybrid Energy System (HES) by integrating carbon-based (i.e., bio-mass, oil-shale, etc.) with non-carbon based energy sources (i.e., wind energy, hydro, geothermal, nuclear, etc.). Advances in process development, control and modeling are the unifying vision for HES. This paper describes new modeling tools and methodologies to simulate advanced energy processes. Needs are emerging that require advanced computational modeling of multiphase reacting systems in the energy arena, driven by the 2007 Energy Independence and Security Act, which requires production of 36 billion gal/yr of biofuels by 2022, with 21 billion gal of this as advanced biofuels. Advanced biofuels derived from microalgal biomass have the potential to help achieve the 21 billion gal mandate, as well as reduce greenhouse gas emissions. Production of biofuels from microalgae is receiving considerable interest due to their potentially high oil yields (around 600 gal/acre). Microalgae have a high lipid content (up to 50%) and grow 10 to 100 times faster than terrestrial plants. The use of environmentally friendly alternatives to solvents and reagents commonly employed in reaction and phase separation processes is being explored. This is accomplished through the use of hydrothermal technologies, which are chemical and physical transformations in high-temperature (200-600 C), high-pressure (5-40 MPa) liquid or supercritical water. Figure 1 shows a simplified diagram of the production of biofuels from algae. Hydrothermal processing has significant advantages over other biomass processing methods with respect to separations. These 'green' alternatives employ a hybrid medium that, when operated supercritically, offers the prospect of tunable physicochemical properties. Solubility can be rapidly altered and phases partitioned selectively to precipitate or dissolve certain components by altering temperature or pressure in the near-critical region. The ability to tune the solvation properties of water in the highly compressible near-critical region facilitates partitioning of products or by-products into separate phases to separate and purify products. Since most challenges related to lipid extraction are associated with the industrial scale-up of integrated extraction systems, the new modeling capability offers the prospect of addressing previously untenable scaling issues.

02 PETROLEUM↗

Radio-frequency electromagnetic field measurements for direct detection of electron Bernstein waves in a torus plasma

To identify the mode-converted electron Bernstein wave (EBW) in a torus plasma directly, we have developed an interferometry system, in which a diagnostic microwave injected outside of the plasma column was directly detected with the probing antenna inserted into the plasma. In this work, plasma production and heating are achieved with 2.45 GHz, 2.5 kW electron cyclotron heating (ECH), whereas diagnostics are carried out with a lower power (10 W) separate frequency (1-2.1 GHz) microwave. Three components, i.e., two electromagnetic (toroidal and poloidal directions) and an electrostatic (if refractive index is sufficiently higher than unity, it corresponds to radial component), of ECRF electric field are simultaneously measured with three probing antennas, which are inserted into plasma. Selectivities of each component signal were checked experimentally. Excitation antennas have quite high selectivity of direction of linear polarization. As probing antennas for detecting electromagnetic components, we employed a monopole antenna with a length of 35 mm, and the separation of the poloidal (O-wave) and toroidal (X-wave) components of ECRF electric field could be available with this antenna. To detect EBW, which is an electrostatic wave, a small tip (1 mm) antenna was used. As the preliminary results, we detected signals that have three characteristics of EBW, i.e., short wavelength, backward propagation, and electrostatic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal NF3 fluorination/oxidation of cobalt, yttrium, zirconium, and selected lanthanide oxides

This paper presents results of our continuing investigation on the use of nitrogen trifluoride as a fluorination or fluorination/oxidation agent for separating valuable constituents from used nuclear fuels by exploiting the different volatilities of the constituent fission product and actinide fluorides. This article focuses on fission products that do not have volatile fluorides or oxyfluorides at expected operations temperatures. Our thermodynamic calculations show that nitrogen trifluoride has the potential to completely fluorinate fission product oxides to their fluorides. Simultaneous thermogravimetric and differential thermal analyses show that the oxides of cobalt, zirconium, and the lanthanides are fluorinated but do not form volatile fluorides when treated with nitrogen trifluoride at temperatures up to 550°C. Our studies of gadolinium-doped commercial nuclear fuel indicate that nitrogen trifluoride can extract uranium from the non-volatile gadolinium.

Scheele, Randall D.↗