Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radically”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Impact of wildfires on regional ozone and PM 2.5 : Considering the light absorption of Brown carbon

The influence of wildfire brown carbon (BrC) in moderating the formation of O 3 and fine particulate matter (PM 2.5 ) due to its absorption of ultraviolet (UV) radiation is, for the first time, investigated using a modified community multiscale air quality (CMAQ) model. The wavelength-dependent imaginary refractive index of the organic carbon from wildfires, which are needed by the CMAQ model for its inline photolysis rate calculation, are generated experimentally from wood burning aerosols from a combustion chamber. On high emission days of the Bastrop County Complex fire in Texas in early September 2011, BrC UV absorption reduces the daytime average NO 2 photolysis rate by up to 38% in the core region of the wildfire plume compared to the base scenario that does not consider BrC absorption. Consequently, O 3 production in the smoke plume is suppressed compared to the base scenario due to reduced HO x radical concentrations. Further, in the core region, the predicted O 3 increase due to wildfire reaches as high as 47–123 ppb without considering BrC absorption, the predicted increase of O 3 is 5–15% lower when BrC absorption is considered. Similarly, considering the BrC UV absorption leads to approximately 1% (or ~2–3 µgm -3 ) lower estimation of the wildfire emissions’ impact on total PM 2.5 . This change is small because secondary aerosols, which are the components affected by BrC absorption, only account for a small fraction of the total PM 2.5 in wildfire impacted regions in this study. In addition, our study shows that assumptions about aerosol mixing state (core-shell vs. homogeneous) in the inline photolysis rate calculation would not significantly affect out assessment of the impact of wildfire BrC light absorption on O 3 and PM 2.5 .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Predicting cost-effective carbon fiber precursors: Unraveling the functionalities of oxygen and nitrogen-containing groups during carbonization from ReaxFF simulations

Blends of polyacrylonitrile (PAN) and poly(p-phenylene-2,6-benzobisoxazole) (PBO) as precursors may offer an opportunity to reduce the cost of carbon fiber (CF) production. The all-carbon ring formations and volatile gas production during the heating and carbonization for 9 PAN/PBO blend precursors with varying mixing ratios are studied via the ReaxFF reactive molecular dynamics simulations. Evolutions of oxygen-containing (O-containing) and nitrogen-containing (N-containing) groups are detailed, in order to reveal the reaction mechanisms of the O and N-based CF precursors. Particularly, the O-containing groups are identified to be more efficient for initiating the carbonization, whereas N-containing groups are far longer retained in the graphitic materials and play a key role in capturing and converting carbon radical species into the graphitic networks. Additionally, the PAN/PBO blend precursor with a mole ratio of 1:1 is compared with the pre-oxidized PAN, PAN, and PBO. As a result, it is found that the PAN/PBO blends could be a promising alternative for the cost-effective PAN-based CF precursors, since they can decrease the cost of the CF production by means of: (a) eliminating the pre-oxidation process, (b) having considerable all-carbon ring formations within a short period, and (c) having a relatively fast conversion rate, reaching 95% 6-membered carbon ring formation.

42 ENGINEERING↗
DOE OSTI2020

Strain-controlled magnetic ordering in 2D carbon metamaterials

Here, we use ab initio spin-polarized density functional theory to study the magnetic order in a Kagomé-like 2D metamaterial consisting of pristine or substitutionally doped phenalenyl radicals polymerized into a nanoporous, graphene-like structure. In this and in a larger class of related structures, the constituent polyaromatic hydrocarbon molecules can be considered as quantum dots that may carry a net magnetic moment. The structure of this porous system and the coupling between the quantum dots may be changed significantly by applying moderate strain, thus allowing to control the magnetic order and the underlying electronic structure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Porosity and hydrophilicity modulated quaternary ammonium-based sorbents for CO 2 capture

Quaternary ammonium (QA)-based polymeric sorbents are known to be effective for CO 2 capture, especially from ultradilute streams like air. In this work, we address two major challenges in QA sorbent design for application in moisture-swing processes, porosity control and hydrophilicity modulation. Facilely substituting porous CO 2 -active components for non-porous ones can enhance the sorption kinetics by 4-fold compared to the state-of-art, and micro–mesoporous structures are identified as optimal porous structures. A method to modulate the hydrophilicity of QA-based sorbents is developed using controlled radical polymerization, incorporating fluorine-containing monomers. The CO 2 sorption capacity and the tolerance towards moisture are simultaneously enhanced via adjustment of the structure and the content of fluorine-containing blocks. Finally, we postulate that porosity and hydrophilicity optimization can make QA-based sorbents adaptive to deployment of scalable moisture-swing processes in varied and complex atmospheric circumstances.

42 ENGINEERING↗
DOE OSTI2023

An innovative approach for atrazine electrochemical oxidation modelling: Process parameter effect, intermediate formation and kinetic constant assessment

Water reuse for irrigation activities is becoming a crucial worldwide challenge due to the depletion of water sources. Anyway, agricultural drainage can potentially contain dangerous contaminants such as metals, pesticides, and herbicides, including atrazine. To address the need for agriculture wastewater purification, we investigated atrazine removal from simulated wastewater by electro-oxidation using platinum-coated titanium electrodes on a lab-scale experimental apparatus. The effects of electrolyte composition and concentration, i.e. ionic strength and applied current density on atrazine removal, were investigated. The results demonstrated that the electrochemical oxidation of the herbicide occurred through two routes, depending on the presence or absence of oxidizing chlorine species. The generation of intermediates during the treatment was monitored and quantified by evaluating the effect of an inert electrolyte (NaClO 4 ) versus an oxidizable chlorine species (NaCl). In both experimental conditions, five intermediates were identified, including desethyl-atrazine (DEA), hydroxyatrazine (ATZ-OH), desisopropyl-atrazine (DIA) and desethyl-desisopropyl-atrazine (DEDIA). A degradation mechanism and a model for describing hydroxyl radicals and active chlorine species contributions at ATZ oxidation were also proposed. Intermediate evolution profiles suggest that ATZ degradation can be considered as a series–parallel reaction system. Finally, the energy requirement assessment for ATZ removal was carried out. The highest ATZ removal (≅98%) was achieved with NaCl = 0.08 M, J = 60 A/m −2 , and E C = 5.83 kWh m −3 . Results highlight that atrazine removal was improved when an active chlorine species (NaCl) was present in the water solution. Moreover, the addition of chlorine species during electro-oxidation is an energy-saving strategy. Collectively, electro-oxidation technique can be efficiently applied to treat polluted water in order to meet the needs of recycling water quality and reduce resource consumption.

Electro-chemical oxidation↗
DOE OSTI2024

Reduced-order condensed-phase kinetic models for polyethylene, polypropylene and polystyrene thermochemical recycling

Thermochemical recycling of plastic waste (PW) into chemicals and energy vectors requires coupling particle and reactor-scale simulations to accurate condensed phase pyrolysis mechanisms for each constituent. This work proposes a methodology to derive reduced-order condensed-phase kinetic models from validated semi-detailed kinetic mechanisms. Two types of kinetic models are obtained for polyethylene (PE), polypropylene (PP) and polystyrene (PS): reduced semi-detailed models and multi-step fully lumped ones. These families offer different compromises between accuracy and computational cost. The former employ 50–100 gas + liquid species and describe both the radical degradation and the detailed carbon distribution of the products. Conversely, the latter involves 5–10 species per polymer tracking only the main petroleum cuts. The kinetic mechanisms are complemented by the definition of thermochemical properties of gas, liquid, and solid-phase species, accounting for phase-transitions through pseudo-chemical reactions. Model validations are performed by comparison with experimental data and the original semi-detailed mechanisms in terms of mass loss, heat fluxes and product distribution profiles. The resulting CHEMKIN-like condensed-phase models are attached as Supplementary Material and as a GitHub repository. Extending the proposed approach to other polymers and coupling it with existing subsets in the CRECK kinetic framework (e.g., biomass, PVC, PET) offers a powerful tool to model thermochemical recycling of PW and biomass/PW mixtures.

kinetics↗
DOE OSTI2024

Cellulose nanofibrils-based packaging films synergistically reinforced by lignin and tea polyphenols for strawberry preservation

Developing biomass-based food packaging materials could alleviate resource scarcity and environmental pollution. Here, this study successfully fabricated cellulose nanofibrils-based packaging films synergistically reinforced by lignin and tea polyphenols for fruit preservation. Thanks to the abundant carboxyl and hydroxyl groups in modified lignin and tea polyphenol, the composite film delivered the highest tensile strength and Young’s modulus of 230.7 MPa and 11.9 GPa, respectively. The water vapor permeability (WVP) and oxygen permeability (OP) of composite film were as low as 2.53 × 10 –11 gm –1 s –1 Pa –1 and 1.69 × 10 –16 cm m –2 s–1 Pa –1 , respectively, demonstrating excellent barrier performance. Furthermore, the composite film possessed remarkable antibacterial (100 % antibacterial activity against two types of bacteria), antioxidant (DPPH free radical scavenging activity of 90 %), and UV shielding properties (impressive UV shielding rate of 99.0 %). Strawberry preservation experiments showed that these composite films could significantly extend shelf life, owing to the excellent barrier and antimicrobial properties. Our research indicated that these composite films could be promising food packaging material compared with traditional plastic and showed great application potential in fruit preservation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Selective depolymerization of polyolefin copolymer via high-entropy alloy catalyzed pyrolysis in a double-layered ultrafast heating reactor

Chemical recycling of polyolefin copolymers (PCPs) is essential for mitigating plastic pollution, yet achieving selective depolymerization into C 2 –C 3 monomers at high productivity remains challenging. Here, we introduce a double-layered ultrafast heating reactor (DUHR) that integrates Joule heating with a high-entropy alloy (HEA) catalyst composed of near-equimolar Co, Cu, Fe, Mn, and Ni. We achieve highly selective depolymerization of PCP into ethylene and propylene, yielding a 70% non-condensable fraction. Significant aromatic fractions form via radical-driven pathways—a behavior distinct from conventional externally heated pyrolyzers—highlighting DUHR's ability to generate reactive species and modulate reaction pathways. Furthermore, these findings demonstrate an effective strategy for chemical recycling of real-world plastic waste for polyolefin circularity and sustainable resource recovery.

Chemical recycling↗
DOE OSTI2026

A Multicopper Oxidase from Paenibacillus Polyethylenelyticus JNU01 Oxidizes Polyethylene

Polyethylene (PE) is a widely used plastic that persists in the environment and resists breakdown via microbial degradation. In this work, we discovered a new bacterium, Paenibacillus polyethylenelyticus JNU01, that grows on a PE-like wax (PELW, 4 kDa) as its sole carbon source, causing chemical modifications to the substrate and releasing small-molecule products. Genomic and transcriptomic analyses identified a multicopper oxidase (PpMmcO) as a key enzyme candidate for this observed activity. PpMmcO promoted surface oxidation, increased hydrophilicity, and the release of small-molecule products such as ketones, alkanes, and alkenoic acids. Scanning electron microscopy confirmed surface damage on both PELW and post-use greenhouse PE films. Weight loss analysis showed mass losses of 5.2% for the PELW powder and 1.6% for the greenhouse PE film after treatment with wild-type PpMmcO. We propose a radical-mediated pathway catalyzed by PpMmcO. These findings identify a new bacterium and enzyme capable of promoting partial PE oxidation and provide insight into biological processes that may act on polyethylene.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Screening of transition metals for PFAS adsorption: A comparative DFT investigation

Transition metals are promising candidates for catalytic destruction of per- and polyfluoroalkyl substances (PFAS). This study employed density functional theory (DFT) calculations to systematically investigate the adsorption of PFAS, which is a critical step in the catalytic process, onto a group of transition metals, namely Cu, Pd, Pt, and Rh. The investigation considered the influence of different PFAS characteristics, including chain length, functional group (i.e., sulfonic vs. carboxylic), and protonation state (i.e., protonated, anionic, and deprotonated radical) on the adsorption mechanism. Overall, the findings indicated that the adsorption of PFAS on transition metals exhibited thermodynamically favorable energetics, with Rh showing the most favorable adsorption for PFAS. However, the adsorption strength was significantly dependent on the protonation state of PFAS. Cu was the highest electron donor, while Pt was the highest electron acceptor. Results were compared to experimental studies in the literature for qualitative validation.

Adsorption↗
DOE OSTI2023

Electricity-driven recycling of ester plastics using one-electron electro-organocatalysis

Here, we report the catalytic use of electrochemically generated one-electron reducing agents to produce ester anion radicals that can decompose to acids and alcohols in the presence of oxygen. Through this approach, we demonstrate that molecular analogs of polyethylene terephthalate (PET) can be deconstructed into their molecular components. We additionally show efficient reductive scission of ester bonds in PET plastic using catalytically regenerated reducing agents based on benzimidazolium cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polypeptide-based batteries toward sustainable and cyclic manufacturing

Mass demand for lithium-ion batteries (LIBs) consumes enormous resources, thus having a great impact on the battery supply chain. Here, it is essential to create a sustainable manufacturing cycle for LIBs. Recently in Nature, Wooley and collaborators reported an all-polypeptide organic radical battery, demonstrating the potential of sustainable, recyclable metal-free batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Engineering a photoenzyme to use red light

Photoenzymatic reactions involving flavin-dependent “ene”-reductases (EREDs) rely on protein-templated charge transfer (CT) complexes between the cofactor and substrate for radical initiation. These complexes typically absorb in the blue region of the electromagnetic spectrum. Here, we engineered an ERED to form CT complexes that absorb red light. Mechanistic studies indicate that red-light activity is due to the growth of a red-absorbing shoulder off the previously identified cyan absorption feature. Molecular dynamics simulations, docking, and excited-state calculations suggest that the cyan feature involves a π→π* transition on flavin, whereas the red-light absorption is a π→π* transition between flavin and the substrate. Furthermore, differences in the electronic transition are due to changes in the substrate-binding conformation and allosteric tuning of the electronic structure of the cofactor-substrate complex. Microenvironment tuning of the CT complex for red-light activity is observed with other engineered photoenzymatic reactions, highlighting this effect’s generality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

PAH formation from jet stirred reactor pyrolysis of gasoline surrogates

Soot particles and their precursor polycyclic aromatic hydrocarbon (PAH) species, formed during combustion, are responsible for particulate emissions in gasoline direct injection (GDI) engines. To better understand the effects of fuel composition on formation of soot in GDI engines, the pyrolysis of several gasoline surrogates was studied in a jet-stirred reactor across a broad temperature range at atmospheric pressure and 1 s residence time. Fuel and intermediate species, including aromatics up to naphthalene, were measured using gas chromatography (GC). PAH concentrations from pyrolysis of surrogate fuels were compared to gain insight into the effects of fuel composition on PAH formation. In addition, synergistic effects were observed in pyrolysis experiments of binary blends. A detailed kinetic model, recently developed at Lawrence Livermore National Laboratory (LLNL), successfully captured the effects of blending and the concentration of major PAHs. Major reaction pathways are discussed, as well as the role of important intermediate species, such as acetylene, and resonantly stabilized radicals such as allyl, propargyl, cyclopentadienyl, and benzyl in the formation of PAH.

36 MATERIALS SCIENCE↗
DOE OSTI2021

An experimental and detailed kinetic modeling study of the pyrolysis and oxidation of allene and propyne over a wide range of conditions

Allene and propyne are important intermediates in the pyrolysis and oxidation of higher hydrocarbon fuels, and they are also a major source of propargyl radical formation, which can recombine into different C 6 H 6 isomers and finally produce soot. In a prior work (Panigrahy et al., “A comprehensive experimental and improved kinetic modeling study on the pyrolysis and oxidation of propyne”, Proc. Combust. Inst 38 (2021)), the pyrolysis, ignition , and laminar flame speed of propyne were investigated. To understand the kinetic features of initial fuel breakdown and oxidation of the two C 3 H 4 isomers, new measurements for allene pyrolysis and oxidation are conducted in the present paper at the same operating conditions as those studied previously for propyne. Ignition delay times of allene are measured using a high-pressure shock tube and a heated twin-opposed piston rapid compression machine in the temperature range 690– 1450 K at equivalence ratios of 0.5, 1.0 and 2.0 in ‘air’, and at pressures of 10 and 30 bar. Pyrolysis species measurements of allene and propyne are also performed using a gas chromatography integrated singlepulse shock tube in the temperature range 1000–1700 K at pressure of 2 and 5 bar. Furthermore, laminar flame speeds of allene are measured at elevated gas temperatures of 373 K at pressures of 1 and 2 bar for a wide range of equivalence ratios from 0.6 to 1.5. A newly updated kinetic mechanism developed for this study is the first model that can well reproduce all of the experimental results for both allene and propyne. It is observed that in the pyrolysis process, allene dissociates faster than propyne. Both isomers exhibit similar ignition delay times at high temperatures (>1000 K), while, at intermediate temperatures (770–1000 K) propyne is the faster to ignite, and at lower temperatures (< 770 K) allene becomes more reactive. Furthermore, laminar flame speeds for propyne are found to be slightly faster than those for allene under the conditions studied in this work

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Burning velocities of R-32/O 2 /N 2 mixtures: Experimental measurements and development of a validated detailed chemical kinetic model

This work entails characterizing the flammability of the refrigerant R-32 (CH 2 F 2 ) by both experimental measurements and modeling. Burning velocities S u were measured using a constant-volume spherical-flame method for R-32/O2/N 2 mixtures with O 2 /N 2 ratios ranging from 21% (synthetic air) to 40%, pressures of (1 to 3) bar, and equivalence ratios $\phi$ of (0.8 to 1.3). Based on a critical assessment of available data, and extended by our own calculations, a detailed chemical kinetic model was developed and key reactions determined using reaction path and sensitivity analyses. Initiation and combustion were identified as distinct kinetic regimes and burning velocities were found to be controlled by two primary reactions: unimolecular decomposition of CH 2 F 2 → CHF + HF and the subsequent reaction, CHF + O 2 → CHFO + O, the latter reaction initiating the radical chain propagating and branching by producing O atoms. Sensitive rate constants in the kinetic model were critically adjusted within their uncertainties and current knowledge bounds to best fit the experimental burning velocities. We found that rate constants in the model could be adjusted to match a given experimental S u for specific conditions (O 2 loading, P, T, $\phi$). This, however, then fixes predicted burning velocities for other all conditions within (3 to 4)% if physically realistic rate parameters are maintained. Thus, the entire set of experimental data is fit, not just to particular conditions. Relative random uncertainties in the experimental Su measurements were (4 to 6)%, but assumptions made for thermal radiation lost by the burned gas in the spherical-flame experiments add an additional systematic uncertainty. Systematic differences between the limiting cases of adiabatic (no thermal radiation lost) and optically-thin (all thermal radiation lost) varied significantly with conditions and ranged from (4 to 30)% at high to low velocities, respectively, translating into uncertainties of (2 to 15)% considering the average of two limiting cases. Comparison of experimental and kinetically modeled Su values suggests that the burned gas tends towards the optically-thin limit at the lowest pressures and fuel loadings and toward the adiabatic limit at the highest pressures and loadings. We tested and found support for this conclusion with a detailed analysis as a function of all the conditions (T, P, % O 2 , $\phi$). This behavior appears to transition from optically-thin to adiabatic as the density of the initial fuel increases, which results in increased CO 2 in the burned gas and thus increased absorption of the thermal radiation (consistent with the Beer-Lambert Law). The validated detailed model based on evaluated kinetics is shown to accurately predict burning velocities for R-32 O 2 /N 2 mixtures over a wide range of conditions and provides a reliable basis for extrapolation to other conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An experimental and modeling study on auto-ignition kinetics of ammonia/methanol mixtures at intermediate temperature and high pressure

A rapid compression machine (RCM) has been applied to measure the ignition delay times of NH 3 /CH 3 OH mixtures covering pressures of 20 and 40 bar, equivalence ratios of 0.5, 1.0 and 2.0, and temperatures between 845 and 1100 K. Here the measurements show that the NH 3 /CH 3 OH mixtures become more reactive with increasing methanol addition. Addition of merely 1% (molar basis) of CH 3 OH to NH 3 lowers the ignition temperature around 100 K at 40 bar in comparison to pure NH 3 . The ignition delay is a complex function of fuel mixture and stoichiometry. For the 1% CH 3 OH mixture, the leaner mixtures are more reactive, while the reverse trend is found for mixtures with 5%, 20% and pure CH 3 OH. Analysis of the pressure profiles shows three distinct ignition modes for NH 3/ CH 3 OH mixtures, facilitated by the pre-ignition heat release from NH 3 consumption. A detailed mechanism for ignition of NH 3 /CH 3 OH fuel blends has been developed, capable of reproducing the ignition behavior of mixtures with reasonable accuracy. A subset for amine / methanol interactions was established, with rate constants for the key reaction between NH 2 and CH 3 OH calculated from ab initio theory. A sensitivity analysis indicates that the critical reactions during the auto-ignition process vary with the CH 3 OH mole fraction in the fuel. The ammonia chemistry, namely NH 2 + NO, NH2 + NO 2 and NH 2 + HO 2 , is dominant for the mixture with 1% CH 3 OH, while the reactions related to CH 3 OH and H 2 O 2 are more important for the 20% CH 3 OH mixture. The interaction between ammonia and methanol shows a more prominent effect on auto-ignition for mixtures with 5% CH 3 OH in fuel as compared to those with 1% and 20% CH 3 OH. According to the modeling results, methanol addition is found to enrich the O/H radical pool, consuming ammonia and promoting auto-ignition through different reaction pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Re-evaluation of rate constants for the reaction N 2 H 4 (+ M) $^→_←$ NH 2 + NH 2 (+ M)

Rate constants for the dissociation/recombination reaction N 2 H 4 (+ M) $^→_←$ NH 2 + NH 2 (+ M) are determined by a combination of quantum-chemical calculations and statistical unimolecular rate theory. Between 1100 and 2500 K, limiting low-pressure rate constants for hydrazine dissociation in the bath gas Ar of k 0 = [Ar] 6.1 × 10 20 (T/1000 K) –7.3 exp (-34490 K/T) cm 3 mol –1 s –1 , limiting high-pressure rate constants of k ∞ = 7.6 × 10 16 (T/1000 K) –1.0 exp(-33600 K/T) s –1 , and center broadening factors of the falloff curves (between 1100 and 1600 K in Ar) of F cent = 0.71 exp(- T/1460 K) + 0.29 exp(- T/21 K) + exp(-13400 K/T) were calculated. Using equilibrium constants K C = 1.7 × 10 3 (T/1000 K) –1.5 exp(-33,460 K/T) mol cm –3 , between 300 and 600 K limiting low-pressure rate constants for the reverse recombination of NH 2 radicals in the bath gas N 2 of k rec,0 = [N 2 ] 4.4 × 10 20 (T/400 K) –6.9 exp (-1630 K/T) cm 6 mol –2 s –1 , limiting high-pressure rate constants of k rec,∞ = 4.4 × 10 13 (T/1000 K) 0.44 exp(-140 K/T) cm 3 mol -1 s –1 , and center broadening factors (between 300 and 600 K in N 2 ) of F cent = exp(- T/1130 K) + exp (-10340 K/T) were obtained. A comparison with experimental results for hydrazine dissociation from the literature suggests incomplete falloff extrapolations toward k ∞ and experimental problems in the determination of k 0 at temperatures above about 1600 K. Finally, implications of the present re-evaluated rate constants for the modeling of high temperature ammonia oxidation kinetics are discussed, showing an only small influence of their precise values on the overall properties of the process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗