Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantitative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Quantitative and qualitative bone imaging: A review of synchrotron radiation microtomography analysis in bone research

All levels of the unique hierarchical structure of bone, consisting of collagen and hydroxyapatite crystals at the nanoscale to osteon/lamellae structures at the microscale, contribute to its characteristic toughness and material properties. Elements of bone's density and size contribute to bone quantity (or bone mass), whereas elements of bone's material composition, material properties, internal structure, and organization describe bone quality. Furthermore, bone quantity and quality can be degraded by factors such as aging, disease, treatments, and irradiation, compromising its ability to resist fracture and sustain loading. Accessing the morphology and architecture of bone at the microscale to quantify microstructural features and assess the degree of mineralization and path of crack propagation in bone provides crucial information on how these factors are influencing bone quantity and quality. Synchrotron radiation micro-computed tomography (SRμCT) was first used to assess bone structure at the end of the 1990's. One of the main advantages of the technique is that it enables accurate three-dimensional (3D), non-destructive quantification of structure while traditional histomorphometry on histological sections is inherantly destructive to the sample and two-dimensional (2D). Additionally, SRμCT uses monochromatic, high-flux X-ray beams to provide high-resolution and high-contrast imaging of bone samples. This allows the quantification of small microstructural features (e.g. osteocyte lacunae, canals, trabeculae, microcracks) and direct gray value compositional mapping (e.g. mineral quantification, cement lines) with greater speed and fidelity than lab-based micro-computed tomography. In this article, we review how SRμCT has been applied to bone research to elucidate the mechanisms by which bone aging, disease, and other factors affect bone fragility and resistance to fracture.

60 APPLIED LIFE SCIENCES↗

Fast, quantitative, and nondestructive evaluation of hydrided LWR fuel cladding by small angle incoherent neutron scattering of hydrogen

A non-destructive neutron scattering method to precisely measure the uptake of hydrogen and the distribution of hydride precipitates in light water reactor (LWR) fuel cladding was developed. Zircaloy-4 cladding used in commercial LWRs was used to produce hydrided specimens. The hydriding apparatus consists of a closed stainless steel vessel that contains Zr alloy specimens and hydrogen gas. Following hydrogen charging, the hydrogen content of the hydrided specimens was measured using the vacuum hot extraction method, by which the samples with desired hydrogen concentration were selected for the neutron study. Optical microscopy shows that our hydriding procedure results in uniform distribution of circumferential hydrides across the wall. Small angle neutron incoherent scattering was performed in the High Flux Isotope Reactor at Oak Ridge National Laboratory. This study demonstrates that the hydrogen in commercial Zircaloy-4 cladding can be measured very accurately in minutes by this nondestructive method over a wide range of hydrogen concentrations from a very small amount ( 20 ppm) to over 1000 ppm. The hydrogen distribution in a tube sample was obtained by scaling the neutron scattering rate with a factor determined by a calibration process using standard, destructive direct chemical analysis methods on the specimens. This scale factor will be used in future tests with unknown hydrogen concentrations, thus providing a nondestructive method for absolute hydrogen concentration determination.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quantitative Measurement of Integrated Band Intensities of Benzene Vapor in the Mid-Infrared at 278, 298, and 323 K

Pressure broadened (1 atm. N2) laboratory spectra of benzene vapor (in natural abundance) were recorded at 278, 298, and 323 K, covering 600-6500 cm-1. The spectra were recorded at a resolution of 0.112 cm-1 using a commercial Fourier transform spectrometer. The pressure of each benzene vapor sample was measured using high precision capacitance manometers and a minimum of nine sample pressures were recorded for each temperature. The samples were introduced into a temperature-stabilized static cell (19.94(1) cm pathlength) that was hard-mounted into the spectrometer. From these data a fit composite spectrum was calculated for each temperature. The number density for the three composite spectra was normalized to 296 K. The spectra give the absorption cross section (cm2 molecule-1, naperian units) as a function of wavenumber. From these spectra integrated band intensities (cm molecule-1 and atm-1 cm-2) for intervals corresponding to the stronger benzene bands were calculated and are compared with previously reported values. We discuss and quantify error sources and estimate our systematic (NIST Type-B) errors to be 3% for the stronger bands. The measured absorption coefficients and integrated band intensities are useful for remote sensing applications such as measurements of planetary atmospheres and assessment of the environmental impact of terrestrial oil fire emissions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An infrared spectral database for gas-phase quantitation of volatile per- and polyfluoroalkyl substances (PFAS)

We report the construction of a database of vetted infrared spectra specifically targeting volatile fluorocarbon gases that may be emitted during thermal treatment of per- and polyfluoroalkyl substances (PFAS) to assist understanding of treatment processes and improve quantification. To populate this database, protocols derived from the Pacific Northwest National Laboratory (PNNL) infrared spectral database are used, curtailing the species selection for this data set. Each spectrum in the database is a weighted average derived from 10 or more individual measurements at different partial pressures (static method) or flow rates (dissemination method) to yield good fidelity of both strong and weak infrared signatures, with each composite spectrum ranging from = 6500 cm-1 to = 600 cm-1 with an apodized resolution of 0.112 cm-1. This resolution was chosen to fully resolve all spectral features, recognizing that atmospheric pressure broadening results in nearly all ro-vibrational lines having linewidths = 0.1 cm-1. As an example case, application of the database is demonstrated via identification and quantification of dominant 1H-perfluoroheptane and perfluorohept-1-ene fluorocarbon products resulting from thermal decomposition of perfluorooctanoate (PFOA) below 450 °C.

Infrared, Gas-phase spectra, FTIR, Spectral databa↗

Quantitative determination of site occupancy of multi-rare-earth elements doped into Ca{sub 2}SnO{sub 4} phosphor by electron channeling microanalysis

X-ray fluorescence analysis based on electron channeling effects in transmission electron microscopy (TEM) was performed on Ca{sub 2}SnO{sub 4} phosphor materials doped with Eu{sup 3+}/Y{sup 3+} at various concentrations, which showed red photoluminescence associated with the {sup 5}D{sub 0}-{sup 7}F{sub 2} electric dipole transition of Eu{sup 3+} ions. The method provided direct information on which host element site dopant elements occupy, the results of which were compared with those of X-ray diffraction (XRD)-Rietveld analysis. The obtained results indicated that while it is not favorable for a part of Eu{sup 3+} to occupy the smaller Sn{sup 4+} site, this is still energetically better than creating Ca vacancies or any other of the possible charge balance mechanisms. The local lattice distortions associated with dopant impurities with different ionic radii were also examined by TEM-electron energy-loss spectroscopy (TEM-EELS). The change in PL intensity as a function of dopant concentration is discussed based on the experimental results, although the general concept of concentration quenching applies. - Abstract: The composition of Ca{sub 1.8}Eu{sub 0.2}Y{sub 0.2}Sn{sub 0.8}O{sub 4} determined by electron channeling microanalysis is graphically shown, where the rare-earth dopants, Eu and Y preferentially occupy the Ca and Sn sites, respectively, to maintain the local charge neutrality.

36 MATERIALS SCIENCE↗

Investigation and application of quantitative relationship between sp energy levels of Bi{sup 3+} ion and host lattice

Information on {sup 1}S{sub 0}-{sup 3}P{sub 1} (A band) and {sup 1}S{sub 0}-{sup 1}P{sub 1} (C band) transition energy of Bi{sup 3+} ion in dozens of different compounds has been gathered and analyzed. With the use of the dielectric theory of the chemical bond for complex crystals, relationships between A and C absorption band and environmental factor h{sub e} were established: E{sub A}=2.972+6.206exp (-h{sub e}/0.551); E{sub C}=3.236+10.924exp (-h{sub e}/0.644). For Bi{sup 3+} doped hosts with known structure and refractive index, it is possible to predict Bi{sup 3+} energy level position with an good accuracy of typically {+-}0.51 eV using the two relationships. Moreover, a direct relationship between A and C band was deduced: E{sub C}=3.236+2.290(E{sub A}-2.972){sup 0.856}. Thus a very simple method to predict C band position was proposed. This work will be of great help to understand spectroscopy of Bi{sup 3+} and will be useful for developing new PDP, LED and mercury-free fluorescent lamp phosphors. - Graphical abstract: This figure shows relationship between positions of A band and C band of Bi{sup 3+} ion and environmental factor h{sub e} of host. It establishes the relation between macroscopical spectroscopy of Bi{sup 3+} ion and microcosmic structure of the hosts. Highlights: Black-Right-Pointing-Pointer Relationships between A, C absorption band and environmental factor h{sub e} were established. Black-Right-Pointing-Pointer A direct relation between A and C band was deduced and an easier method to predict C band was given. Black-Right-Pointing-Pointer Positions of C band of Bi{sup 3+} ion in some compounds were predicted using our formula.

36 MATERIALS SCIENCE↗

Quantitative analysis of Nb in solution in a microalloyed carburizing steel by electrochemical etching

The amount of Nb in solution in a microalloyed carburizing steel (Nb-modified SAE 8620) was evaluated in different heat treated conditions. The test procedure involved electrochemical extraction, filtration and Inductively Coupled Plasma Atomic Emission Spectroscopic (ICP-AES) analysis. Characterization by X-ray diffraction of the residues collected in the filters was also performed. Results showed that Nb in solution tends to hydrolyze during electrolysis in a 10 vol.% HCl electrolyte, giving misleading measurements of the amount of Nb that dissolved during high temperature heat treatment. Hydrolysis of Nb is prevented by the addition of tartaric acid to the electrolyte. In the full dissolution condition, coarse (Ti,Nb)CN was the only precipitate present. Finer (Nb,Ti)C precipitates were observed after heat treating at 1050 deg. C.

36 MATERIALS SCIENCE↗

Quantitative measurements of small scaled grain sliding in ultra-fine grained Al-Zn alloys produced by friction stir processing

An Al-15 wt.% Zn alloy was processed by friction stir processing to produce grain sizes of {approx} 0.5 {mu}m, {approx} 1 {mu}m, and {approx} 2 {mu}m. A simple and effective method was developed to determine the true strain by scribing marker lines with scaled division using focused ion beam micromachining prior to deformation. The 'microscopic' grain boundary sliding, with displacements of adjacent grains of the order of a nanometer, can easily be detected by the proposed technique, providing a surface analysis with high accuracy that could be used to observe the changes in relief with increasing strains. Moreover, the occurrence of grain boundary sliding at room temperature was considered a major cause for higher strain rate sensitivity in fine-grained Al-Zn alloys.

36 MATERIALS SCIENCE↗

Quantitative investigation of the tensile plastic deformation characteristic and microstructure for friction stir welded 2024 aluminum alloy

The effect of the microstructure heterogeneity on the tensile plastic deformation characteristic of friction stir welded (FSW) 2024 aluminum alloy was investigated for the potential applications on light weight design of vehicles. The microstructure characteristics of the FSW joints, such as the grain structure, dislocation density and the distribution of precipitation, were studied by electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM). The tensile deformation characteristic of the FSW joints was examined using the automatic strain measuring system (ASAME) by mapping the global and local strain distribution, and then was analyzed by mechanics calculation. It is found that the tensile deformation of the FSW joints is highly heterogeneous leading to a significant decrease in global ductility. The FSW joints mainly contain two typical deformation zones, which show great effect on the regional inhomogeneous deformation. One is the nugget zone (NZ) with a region of 8 mm in width, and the other is part of the BM with a region of 10 mm in width. The BM of the joints is the weakest region where the strain localizes early and this localization extends until fracture with a strain over 30%, while the strain in the NZ is only 4%. Differences in regional strain of FSW joints, which are essentially controlled by grain structure, the distribution of precipitation and dislocation density, result in decrease on the overall mechanical properties. - Highlights: Black-Right-Pointing-Pointer Microstructure heterogeneity of welds on tensile deformation behavior is studied. Black-Right-Pointing-Pointer The welds contain two typical deformation zones, affecting the global ductility. Black-Right-Pointing-Pointer Regional strain of welds is controlled by grain structure and dislocation density. Black-Right-Pointing-Pointer Theoretical calculation is in good agreement with experimental result.

36 MATERIALS SCIENCE↗