Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Micro-CT analysis and mechanical properties of Ti spherical and polyhedral void composites made with saccharose as a space holder material

The paper describes the formation, morphology and mechanical properties of Ti void composites. The Ti void composites were made using 100 and 325 mesh Ti powder for solid scaffold formation. The spherical and polyhedral voids (pores) were formed using saccharose particles (table sugar) of different shapes. The Ti void composite morphology was investigated by microcomputed tomography and scanning electron microscopy. The Ti void composites of designed porosity of 50–70% were made. Compression test was applied for mechanical properties estimation. It has been found, that Ti void composites made from 100 mesh Ti and those having spherical pores have a higher strength and elastic modulus, i.e. for the designed porosity of 50% for 100 and 325 mesh Ti void composites, a compressive strength was 32.32 and 20.13 MPa, respectively. It has been shown that this is related to better sintering of the 100 mesh Ti powders compared with the 325 mesh Ti powders. A correlation between microcomputed tomography data and mechanical properties has also been shown. The Ti void composites, made with the use of saccharose as a space holder, described in this work should be a promising material for biomedical applications, where interconnected pores and good mechanical properties are required. - Highlights: • Ti scaffolds of the porosity of 50–70% were made. • Saccharose particles as space holder were applied. • The voids in the scaffolds were designed with spherical and polyhedral shape. • The scaffold structure was investigated by SEM and micro-CT. • Micro-CT data and mechanical properties of the Ti scaffold have been correlated.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Influence of phase composition on microstructure and properties of Mg-5Al-0.4Mn-xRE (x = 0, 3 and 5 wt.%) alloys

The microstructure and mechanical properties investigations of two AME503 and AME505 experimental alloys in as-cast conditions were presented. The investigated materials were fabricated on the basis of the AM50 commercial magnesium alloy with 3 and 5 wt.% cerium rich mischmetal. In the as-cast condition, both experimental alloys were mainly composed of α-Mg, Al{sub 11}RE{sub 3} and Al{sub 10}RE{sub 2}Mn{sub 7} intermetallic phases. Additionally, due to non-equilibrium solidification conditions, a small amount of α + γ divorced eutectic and Al{sub 2}RE intermetallic phase were revealed. The obtained results also show a significant influence of rare earth elements on Brinell hardness, tensile and compression properties at ambient temperature and especially on creep properties at 473 K. Improved alloy properties with a rise in rare earth elements mass fraction results from an increase in Al{sub 11}RE{sub 3} phase volume fraction and suppression of α + γ eutectic volume fraction in the alloy microstructure. Additionally, the influence of rare earth elements on the dendrite arm space value was discussed. The presented results also proved the thermal stability of the intermetallic phases during creep testing. - Highlights: • Two different Mg-5Al-0.4Mn alloys containing 3 and 5 wt.% of rare earth elements were fabricated. • Addition of rare earth elements leads to a reduction of dendrite arm spaces. • Mechanical properties depend on the phase composition of the alloys. • The increase of the rare earth elements content causes rise of the creep resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effects of friction stir processing and minor Sc addition on the microstructure, mechanical properties, and damping capacity of 7055 Al alloy

Highlights: • Good mechanical and damping properties were obtained in the 7055 after FSP and Sc addition. • The strengthening and damping mechanisms of FSP 7055(-Sc) were analyzed. • FSP and Sc addition were found to be strategy of preparing 7xxx alloys with well damping and mechanical properties. - Abstract: This study investigated the effects of friction stir processing (FSP) and addition of 0.25% (mass ratio) Sc on the microstructure, mechanical properties, and damping capacity of AA 7055 alloy. Microstructure analyses revealed that a low tool rotation rate of 300 rpm effectively inhibited the grain coarsening in the recrystallization of the alloy during FSP. Sc addition prevented the coarsening of grains and precipitated η phase and the annihilation of dislocations in the FSP AA 7055 alloy. After being subjected to FSP at 300 rpm, the AA 7055 alloy containing Sc exhibited good mechanical and damping properties, which were mainly attributed to the fine recrystallized grain structure, fine precipitated η phase, and large number of nano-sized Al{sub 3}(Sc, Zr) particles located at the grain boundaries and dislocations. This work provides an effective strategy for preparing commercial Al alloys with excellent damping capacity and mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Enhancing the tensile properties of EBM as-built thin parts: Effect of HIP and chemical etching

Highlights: • The EBM process leads to important cross section variations in thin parts. • Stress calculation must be based on the average section in order to be relevant. • As-built state has a detrimental effect on every mechanical property. • Mechanical properties of machined samples are met with chemical etching. • HIP has a beneficial effect on the ductility. - Abstract: As-built Ti-6Al-4 V thin parts were manufactured using Electron Beam Melting (EBM) and characterized by optical microscopy and laboratory X-ray tomography in order to observe their microstructure, pore distribution and surface aspect. Chemical etching and HIP post-treatments were applied to as-built samples and their effect on the material and static mechanical properties were studied. Tensile tests were performed on both as-built and post-treated samples and their results compared to the ones reported in the literature for machined EBM samples. Because of the significant variations of the cross section observed along the gauge length, the calculation of the tensile stresses is not straightforward. Three simple sections were measured from the tomography scans. The average section along the gauge length was considered as the most suitable. The tensile mechanical properties of the as-built samples were studied and a detrimental effect of the surface state on the yield strength, ultimate tensile strength and elongation to failure was observed. Smoothing of the surface irregularities induced by chemical etching provoked an increase of those mechanical properties whereas the change of the microstructure generated by the HIP treatment leads to a decrease of the material strength that goes along with an increase of the ductility. Down scaling factors were proposed in order to take into account the sample state, as-built or post-treated.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Navigating high-dimensional process-structure–property relations in nanocrystalline Pt-Au alloys with machine learning

For decades, materials scientists have relied on the process-structure–property paradigm to guide investigations into material behaviors. Traditional studies often examine a limited number of process-structure–property variables, striving to elucidate mechanisms governing material response. However, this approach is time consuming and can limit exploration, as well as the discovery of process-structure–property relations in novel materials. In this paper, we combined combinatorial sputter deposition and multi-modal high-throughput materials characterization with feedforward neural networks to establish high-dimensional process-structure–property relations in Pt-Au alloys, yielding nanocrystalline alloys with high hardness and low resistivity relevant to electrical contact switch applications. We mapped three indicators of process conditions (composition and two atomic deposition characteristics) onto four indicators of material structure (X-ray diffraction, film thickness, density, and surface roughness) and two indicators of material properties (hardness and resistivity), resulting in 784 unique combinations evaluated over a 13-dimensional space. The neural networks predicted Pt-Au alloys with 18–24 at.% Au, when deposited at specific conditions, to have a nanoindentation hardness up to 7.2 GPa. This high hardness value, comparable to some steels, represents a 3-fold improvement in hardness over “hard gold”, a commonly used electrical contact alloy, while maintaining requisite electrical conductivity. The neural network models provide an avenue to identify expected process windows capable of maximizing material performance.

Electrical contact materials↗
DOE OSTI2014

Ab initio studies of structural, electronic, optical, elastic and thermal properties of silver gallium dichalcogenides (AgGaX{sub 2}: X = S, Se, Te)

Graphical abstract: - Highlights: • FP-LAPW method has been used to compute the solid state properties of AgGaX{sub 2} (X = S, Se, Te). • Electronic and optical properties reported with recently developed mBJ potential. • Thermal expansion, heat capacity, Debye temperature, entropy and Grüneisen parameter were evaluated. • Hardness was calculated for the first time at different temperature and pressure. - Abstract: We have performed ab initio calculations for the structural, electronic, optical, elastic and thermal properties of the silver gallium dichalcogenides (AgGaX{sub 2}: X = S, Se, Te). In this study, we have used the accurate full potential linearized augmented plane wave (FP-LAPW) method to find the equilibrium structural parameters and to compute the six elastic constants (C{sub 11}, C{sub 12}, C{sub 13}, C{sub 33}, C{sub 44} and C{sub 66}). We have reported electronic and optical properties with the recently developed density functional theory of Tran and Blaha, and this theory is used along with the Wu-Cohen generalized gradient approximation (WC-GGA) for the exchange-correlation potential. Furthermore, optical features such as dielectric functions, refractive indices, extinction coefficient, optical reflectivity, absorption coefficients and optical conductivities were calculated for photon energies up to 40 eV. The thermodynamical properties such as thermal expansion, heat capacity, debye temperature, entropy, Grüneisen parameter and bulk modulus were calculated employing the quasi-harmonic Debye model at different temperatures (0–900 K) and pressures (0–8 GPa) and the silent results were interpreted. Hardness of the materials was calculated for the first time at different temperatures and pressures.

36 MATERIALS SCIENCE↗
DOE OSTI2014

The influence of α-FeOOH/rGO hybrids on the improved thermal stability and smoke suppression properties in polystyrene

Highlights: • In this paper, α-FeOOH/rGO hybrids had been prepared by a facile hydrothermal method. • The addition of the α-FeOOH/rGO hybrids showed a significant effect on the thermal stability and smoke suppression properties of PS composites. • Graphene can be employed to improve the smoke suppression properties of polymer and further extended the application of graphene. - Abstract: In this work, α-FeOOH/rGO hybrids were firstly prepared by a facile hydrothermal method. X-ray diffraction and transmission electron microscopy results indicated that α-FeOOH nanoparticles were dispersed uniformly on the surface of graphene nanosheets. Subsequently, the α-FeOOH/rGO hybrids were incorporated into polystyrene (PS) matrix for the improvement of the thermal stability and smoke suppression properties. It was found that the thermal stability of PS nanocomposite was obviously enhanced upon the introduction of 2.0 wt% α-FeOOH/rGO hybrids. Furthermore, the addition of α-FeOOH/rGO hybrids could improve the smoke suppression properties of PS nanocomposites, as evidenced by the dramatical reduction of carbon monoxide production rate, total smoke release and total smoke production. The total flammable gaseous products from the PS nanocomposites were decreased which further led to the inhibition of smoke. Such a significant improvement in thermal stability and smoke suppression properties was mainly attributed to the physical barrier effect of graphene nanosheets and the catalytic carbonization function of α-FeOOH nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Effects of cation compositions on the electronic properties and optical dispersion of indium zinc tin oxide thin films by electron spectroscopy

Highlights: • REELS analysis can provide optical dispersion and electronic properties of oxide materials. • The band gap varied with In/Zn/Sn compositions and increased after annealing. • The optical properties were examined using REELS in conjunction with the Tougaard–Yubero model. • The dispersion parameters were determined by a single-oscillator Wemple–DiDomenico model. • The Zn and Sn contents play a crucial role in determining the single-oscillator constant and dispersion energy of IZTO thin films. - Abstract: The electronic properties and optical dispersion of indium zinc tin oxide (IZTO) films with different cation compositions were investigated by reflection electron energy loss spectroscopy (REELS). The REELS spectra of IZTO films revealed that the band gap varied with different Sn/Zn ratios and In content. The optical properties were examined with REELS data using Tougaard–Yubero model and the results were compared with the envelope of the transmission spectra obtained using a UV-spectrometer. The dispersion behavior of the refractive index from REELS results was studied in terms of the single-oscillator Wemple–DiDomenico model. The results showed that the different compositions of In/Zn/Sn caused a change in the dispersion parameters of IZTO thin films in contrast to the static values of refractive indices and dielectric constant which remained the same. Our work demonstrated that REELS is an efficient tool to study the optical properties of a material by obtaining the optical parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Investigation of microstructure, micro-mechanical and optical properties of HfTiO{sub 4} thin films prepared by magnetron co-sputtering

Highlights: • HfTiO{sub 4} thin films were deposited by magnetron co-sputtering. • As-prepared and annealed at 800 °C thin films were nanocrystalline. • Optical properties and hardness were investigated in relation to thin films structure. • Hardness was 3-times higher in the case of as-deposited thin films. • HfTiO{sub 4} thin films are suitable for use as optical coatings with protective properties. - Abstract: Titania (TiO{sub 2}) and hafnium oxide (HfO{sub 2}) thin films are in the focus of interest to the microelectronics community from a dozen years. Because of their outstanding properties like, among the others, high stability, high refractive index, high electric permittivity, they found applications in many optical and electronics domains. In this work discussion on the hardness, microstructure and optical properties of as-deposited and annealed HfTiO{sub 4} thin films has been presented. Deposited films were prepared using magnetron co-sputtering method. Performed investigations revealed that as-deposited coatings were nanocrystalline with HfTiO{sub 4} structure. Deposited films were built from crystallites of ca. 4–12 nm in size and after additional annealing an increase in crystallites size up to 16 nm was observed. Micro-mechanical properties, i.e., hardness and elastic modulus were determined using conventional load-controlled nanoindentation testing. the annealed films had 3-times lower hardness as-compared to as-deposited ones (∼9 GPa). Based on optical investigations real and imaginary components of refractive index were calculated, both for as-deposited and annealed thin films. The real refractive index component increased after annealing from 2.03 to 2.16, while extinction coefficient increased by an order from 10{sup −4} to 10{sup −3}. Structure modification was analyzed together with optical energy band-gap, Urbach energy and using Wemple–DiDomenico model.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Effects of sulfurization time and H{sub 2}S concentration on electrical properties of Cu{sub 2}ZnSnS{sub 4} films prepared by sol–gel method

Highlights: • Cu{sub 2}ZnSnS{sub 4} (CZTS) films were prepared by sol–gel method following sulfurization. • The sulfurization time and H{sub 2}S concentration have the effects on the electrical properties. • The tin loss is increased with the increasing of the sulfurization time. • The secondary phases like ZnS make the electrical properties worse. • The CZTS films sulfurized at 5% H{sub 2}S for 90 min had the best electrical properties. - Abstract: Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films have been successfully deposited by a sol–gel method and sulfurization process. The properties of the films were investigated by varying sulfurization time and H{sub 2}S concentration. X-ray diffraction and Raman spectra analyses revealed the formation of CZTS films with a tetragonal type kesterite structure. With increasing the sulfurization time and H{sub 2}S concentration, the intensity of the kesterite (1 1 2) peak became sharper. The stoichiometric ratios of the CZTS films were different from the precursors, which was due to Sn loss during the sulfurization process. The electrical resistivity and mobility of the films increased while the carrier concentration decreased with increasing the sulfurization time. The CZTS thin films sulfurized at 5% H{sub 2}S concentration for 90 min had the best opto-electrical properties with E{sub g} of 1.41 eV, resistivity of 3.64 Ω cm, carrier concentration of 1.11 × 10{sup 18} cm{sup −3} and mobility of 1.54 cm{sup 2}/(V s) at room temperature for PV application.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Phosphides or nitrides for better NLO properties? A detailed comparative study of alkali metal doped nano-cages

Highlights: • Alkali metal doped boron and aluminum phosphide nano-cages are evaluated for NLO properties. • The NLO response of phosphide nano-cages is compared with nitride nano-cages. • Phosphide nano-cages show better NLO properties than the corresponding nitride nano-cages. • Conductivity of doped nano-cages is much higher than pristine nano-cages. • MAl{sub 11}P{sub 12} and MB{sub 11}P{sub 12} show monotonic increase in hyperpolarizability with size of alkali metal. - Abstract: Phosphide nano-cages of MX{sub 12}P{sub 11} and MX{sub 11}P{sub 12} (where X = B or Al, M = Li, Na, K) are investigated theoretically for geometric, electronic and nonlinear optical (NLO) properties. Alkali metal is doped by replacing (a) aluminum or boron atom and (b) phosphorus atom. Alkali metal doping can remarkably alter the electronic and NLO properties of the nano-cages, regardless of doping site. HOMO-LUMO gap is decreased whereas first hyperpolarizability is enhanced significantly in doped AlP and BP nano-cages. PDOS (partial density of states) analysis suggests that diffuse excess electrons from alkali metal play important role in boosting NLO properties of phosphide nano-cages. TD-DFT calculations are performed to study the effect of alkali metal doping on absorption spectra. Red shift is observed in the UV–vis spectra of all considered nano-cages. Comparison of phosphide nano-cages with nitride nano-cages indicated that doping nitride nano-cages with alkali metal leads to greater hyperpolarizability and NLO response than doping phosphide nano-cages.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Effect of adjusting composition on the crystallization and luminescence properties in NaYF{sub 4}:Er{sup 3+} embedded glass ceramics

Highlights: • Intense 2.7 μm emission was achieved in transparent glass ceramics containing NaYF{sub 4}:Er{sup 3+} nanocrystals. • The crystallization and luminescence properties of the nanocrystals embedded glass ceramics are tuned by adjusting the Na{sub 2}O/NaF ratio. • Modifying the properties of glass ceramics through adjusting the glass composition is an effective route. - Abstract: Intense 2.7 μm emission was achieved in transparent glass ceramics containing NaYF{sub 4}:Er{sup 3+} nanocrystals. The effect of adjusting Na{sub 2}O/NaF ratio in glass composition on the crystallizing and luminescence behavior in the glass ceramics was investigated. The controllable crystallization property of NaYF{sub 4} nanocrystals was remained after modifying the glass composition and the crystallization temperature was largely reduced for the samples with high Na{sub 2}O content. The X-ray diffraction and transmission electron microscopy analysis evidenced the shrink of lattice parameter with increasing Na{sub 2}O content. High transparency was kept for these glass ceramic samples, and intense upconversion, near- and mid-infrared emissions were obtained in Er{sup 3+}-doped glass ceramics with an increase of red/green ratio and prominent Stark splits in the sample with high Na{sub 2}O content, indicating the change of crystal field around Er{sup 3+} in the host matrix. Our results indicate that the crystallization and luminescence properties of glass ceramics could be modified through adjusting the glass composition, and it is an effective route to develop glass ceramics with favorable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The influence of thermomechanical treatment pathways on texture and mechanical properties in ARB Cu/Nb nanolaminates

Accumulative roll-bonded Cu/Nb nanolaminates (ARB Cu/Nb) possess high strength, thermal stability, and radiation tolerance arising from a high content of heterophase interfaces at fine layer thicknesses. These properties can be tailored by processing parameters used in the ARB Cu/Nb fabrication process, in which layer thickness, thermal history, and strain pathway determine the interface types and resultant properties found in the material. In this work, we subject ARB Cu/Nb to annealing, and then two different rolling pathways – one where rolling direction is held constant (longitudinal rolling, or LR), and one where rolling direction is rotated by 90º and held constant thereafter (cross rolling, or CR). Rolling is performed on ARB Cu/Nb over a targeted range of layer thicknesses from 193 to 25 nm and resultant bulk textures measured by neutron diffraction are correlated with mechanical properties measured by miniaturized tensile tests. The annealing procedure sharpens texture in both phases. We find that Cu mostly develops the same texture in LR and CR. In contrast, Nb develops a distinct texture along the CR pathway that is distinct from the LR texture. The composite texture of Cu/Nb is thus distinct between LR and CR pathways. This difference in texture development between Cu and Nb as a function of strain after change in rolling direction demonstrates the viability for deliberate pairing of Cu LR and Nb CR textures at a desired layer thickness. For mechanical properties, we find that differences in texture do not result in yield or flow stress differences above a layer thickness of 25 nm. Below a layer thickness of 25 nm, despite similar Taylor factors, yield and flow stress and are significantly different. In conclusion, this indicates texture only influences mechanical behavior at low layer thickness, where interface structure dominates mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Impact of Brine/CO 2 exposure on the transport and mechanical properties of the Mt Simon sandstone

When sandstone rocks are exposed to CO 2 -saturated brine, their transport and mechanical properties can change due to brine/CO 2 -induced chemical reactions. The present study investigates the change in the flow-through characteristics, porosity, and the mechanical behavior of Mt. Simon Sandstone samples caused by exposure to brine/CO 2 . The cores, extracted from a depth interval of 2110.4–2111.4 m (6924–6927 ft) in the Mt. Simon formation, were first characterized for their mechanical and transport properties, and then aged in CO 2 -saturated brine at pressures of 17.24 MPa (2500 psi) and temperature of 50°C for one to two weeks. Following that, the changes in the transport and mechanical properties of the samples were analyzed using He pycnometry, flow perporometry and triaxial testing. Our experiments show that the porosity of the Mt. Simon samples slightly increases after exposure to CO 2 /brine, while the permeability increases more substantially depending on the stress state. Measurements of the flow-through pore size distribution (PSD) are indicative of the changes occurring and are consistent with the observed increases in permeability. Nitrogen adsorption tests (BET), before and after incubation, show a significant loss of pore volume in the mesoporous range that is indicative of clay dissolution. Weakening of the materials was observed based on the mechanical properties studied, a result that is consistent with the observed dissolution of clays that play a central role in the cementation of the quartz grains. Finally, the analysis of the brine compositions reveals an increase in concentration of most cations after incubation with the Mt. Simon cores. This is also consistent with mineral/clay dissolution, confirmed by the porosity, transport, and mechanical property measurements as well as electron microscopy analysis of the same samples.

58 GEOSCIENCES↗
DOE OSTI2024

Structural and thermal properties and the origin of the ultralow thermal conductivity in the defect stannite CuIn 2 Se 4

Phase-pure CuIn 2 Se 4 , a ternary metal chalcogenide that forms in a disordered stannite crystal structure, was synthesized to investigate the structure thermal property relationships as well as reveal the origin of the ultralow thermal conductivity this material possesses over a large temperature range. Modeling of the temperature-dependent heat capacity and thermal conductivity revealed distinctive thermal properties and large lattice anharmonicity. Electron localization function calculations highlight the asymmetric bonding inherent to CuIn 2 Se 4 , which together with lattice anharmonicity directly impacts the thermal properties. Our findings reveal the specific atomic arrangement and bonding governing the thermal properties of this ternary metal chalcogenide. Our findings underscore the specific atomic arrangement and bonding governing the thermal properties in this ternary chalcogenide. This study advances the fundamental understanding of stannites, and our findings can be applied to these and other multinary metal chalcogenides of interest for applications where low thermal conductivity is desirable.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Electronic and optical properties of ultra-thin 2D tungsten disulfide for photovoltaic applications

Atomically thin 2D layered semiconductor materials such as Transition Metal Di-Chalcogenides (TMDCs) have great potential for use as flexible, ultra-thin photovoltaic materials in solar cells due to their favorable photon absorption and electronic transport properties. The electronic properties, such as band structure and bandgap, and optical absorption properties of Tungsten Disulfide (WS 2 ) were obtained from Density Functional Theory (DFT) calculations; the properties of WS 2 make it a favorable photovoltaic material. Using these properties, we have modelled, using numerical calculations and simulations, a solar cell based on monolayer and bulk WS 2 together with amorphous silicon (a-Si). The maximum efficiency of this cell is 23.26% with V OC of 0.843 V and J SC of 33.49 mA/cm 2 . The performance of our solar cell is comparable to many commercial cells. The results show how monolayer WS 2 can serve as a suitable photovoltaic material, opening possibilities to develop solar cells based on 2D TMDC materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Toward a First-Principles Framework for Predicting Collective Properties of Electrolytes

Conspectus Given the universal importance of electrolyte solutions, it is natural to expect that we have a nearly complete understanding of the fundamental properties of these solutions (e.g., the chemical potential) and that we can therefore explain, predict, and control the phenomena occurring in them. In fact, reality falls short of these expectations. But, recent advances in the simulation and modeling of electrolyte solutions indicate that it should soon be possible to make progress toward these goals. In this Account, we will discuss the use of first-principles interaction potentials based in quantum mechanics (QM) to enhance our understanding of electrolyte solutions. Specifically, we will focus on the use of quantum density functional theory (DFT) combined with molecular dynamics simulation (DFT-MD) as the foundation for our approach. The overarching concept is to understand and accurately reproduce the balance between local or short-ranged (SR) structural details and long-range (LR) correlations, allowing the prediction of the thermodynamics of both single ions in solution as well as the collective interactions characterized by activity/osmotic coefficients. In doing so, relevant collective motions and driving forces characterized by chemical potentials can be determined. Here, in this Account, we will make the case that understanding electrolyte solutions requires a faithful QM representation of the SR nature of the ion–ion, ion–water, and water–water interactions. However, the number of molecules that is required for collective behavior makes the direct application of high-level QM methods that contain the best SR physics untenable, making methods that balance accuracy and efficiency a practical goal. Alternatives such as continuum solvent models (CSMs) and empirically based classical molecular dynamics have been extensively employed to resolve this problem but without yet overcoming the fundamental issue of SR accuracy. We will demonstrate that accurately describing the SR interaction is imperative for predicting both intrinsic properties, namely, at infinite dilution, and collective properties of electrolyte solutions. DFT has played an important role in our understanding of condensed phase systems, e.g., bulk liquid water, the air–water interface, ions in bulk, and at the air–water interface. This approach holds huge promise to provide benchmark calculations of electrolyte solution properties that will allow for the development and improvement of more efficient methods, as well as an enhanced understanding of fundamental phenomena. However, the standard protocol using the generalized gradient approximation with van der Waals (vdW) correction requires improvement in order to achieve a high level of quantitative accuracy. Simply simulating with higher level DFT functionals may not be the best route considering the significant computational cost. Alternative methods of incorporating information from higher levels of QM should be explored; e.g., using force matching techniques on small clusters, where high level benchmark calculations are possible, to develop ideal correction terms to the DFT functional is a promising possibility. We argue that DFT with statistical mechanics is becoming an increasingly useful framework enabling the prediction of collective electrolyte properties.

Duignan, Timothy T.↗
DOE OSTI2018

Structural Comparison of Various Silkworm Silks: An Insight into the Structure–Property Relationship

Silkworm silk has attracted considerable attention in recent years due to its excellent mechanical properties, biocompatibility, and promising applications in biomedical sector. However, a clear understanding of the molecular structure and the relationship between the excellent mechanical properties and the silk protein sequences are still lacking. This study carries out a thorough comparative structural analysis of silk fibers of four silkworm species (Bombyx mori, Antheraea pernyi, Samia cynthia ricini, and Antheraea assamensis). A combination of characterization techniques including scanning electron microscopy, mechanical test, synchrotron X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), and NMR spectroscopy was applied to investigate the morphologies, mechanical properties, amino acid compositions, nanoscale organizations, and molecular structures of various silkworm silks. Furthermore, the structure–property relationship is discussed by correlating the molecular structural features of silks with their mechanical properties. Here, the results show that a high content of β-sheet structures and a high crystallinity would result in a high Young’s modulus for silkworm silk fibers. Additionally, a low content of β-sheet structures would result in a high extensibility.

59 BASIC BIOLOGICAL SCIENCES↗