Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “probability distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Quantitative x ray phase contrast imaging of oblique shock wave–interface interactions

Oblique shock wave–interface interactions of gases and liquids have been extensively studied in shock tubes using optical methods to measure equation-of-state (EOS) parameters. However, this is difficult with solids due to their opaqueness to visible light. X ray phase contrast imaging (XPCI) has the penetrative strength to probe solids while still being sensitive to mass density and enhancing the visibility of material boundaries. We investigate the accuracy and repeatability of measuring the mean value of the average mass density (areal density divided by thickness) over region S (B S ) and flow deflection angle (θ) from XPCI images of a sample. To that end, a Hough transform-based method for measuring θ is developed. To measure B S , the XPCI image intensity probability density function (PDF) is modeled accounting for the spatial distribution of x ray energy, scintillator response, and pulse-to-pulse variation in the x ray intensity. In addition, a Monte Carlo-based algorithm for computing the B S PDF is developed. Both methods are validated on an impact-generated oblique shock wave interacting at a solid polymer-to-polymer interface. Furthermore this is accomplished through a comparison to hydrodynamic simulations using well-established EOS. Under the modeling framework for the XPCI image intensity, B S is computed with an accuracy of < 0.1% and precision of 3%–5%, while θ has an uncertainty of 0.2°, respectively. This shows that the XPCI-based model that is developed here could be an invaluable tool for high-fidelity testing of hydrodynamic models in shock polar configurations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

When Spectral Modeling Meets Convolutional Networks: A Method for Discovering Reionization-era Lensed Quasars in Multiband Imaging Data

Over the last two decades, around 300 quasars have been discovered at z ≳ 6, yet only one has been identified as being strongly gravitationally lensed. We explore a new approach—enlarging the permitted spectral parameter space, while introducing a new spatial geometry veto criterion—which is implemented via image-based deep learning. We first apply this approach to a systematic search for reionization-era lensed quasars, using data from the Dark Energy Survey, the Visible and Infrared Survey Telescope for Astronomy Hemisphere Survey, and the Wide-field Infrared Survey Explorer. Our search method consists of two main parts: (i) the preselection of the candidates, based on their spectral energy distributions (SEDs), using catalog-level photometry; and (ii) relative probability calculations of the candidates being a lens or some contaminant, utilizing a convolutional neural network (CNN) classification. The training data sets are constructed by painting deflected point-source lights over actual galaxy images, to generate realistic galaxy–quasar lens models, optimized to find systems with small image separations, i.e., Einstein radii of θ E ≤ 1''. Visual inspection is then performed for sources with CNN scores of P lens > 0.1, which leads us to obtain 36 newly selected lens candidates, which are awaiting spectroscopic confirmation. These findings show that automated SED modeling and deep learning pipelines, supported by modest human input, are a promising route for detecting strong lenses from large catalogs, which can overcome the veto limitations of primarily dropout-based SED selection approaches.

High-redshift galaxies↗
NASA NTRS1971

Calculation of compressible nonadiabatic boundary layers in laminar, transitional and turbulent flow by the method of integral relations

A computer program was developed to do the calculations for two-dimensional or axisymmetric configurations from low speeds to hypersonic speeds with arbitrary streamwise pressure, temperature, and Mach number distributions. Options are provided for obtaining initial conditions either from experimental information or from a theoretical similarity solution. The transition region can be described either by an arbitrary distribution of intermittency or by a function based on Emmons' probability theory. Correlations were developed for use in estimating the parameters of the theoretical intermittency function. Correlations obtained from other sources are used for estimating the transition point. Comparisons were made between calculated and measured boundary layer quantities for laminar, transitional, and turbulent flows on flat plates, cones, cone flares, and a waisted body of revolution. Excellent agreement was obtained between the present theory and two other theories based on the method of finite differences. The intermittency required to reproduce some experimental heat transfer results in hypersonic flow was found to be quite different from the theoretical function. It is suggested that the simple probability theory of Emmons may not be valid for representing the intermittency of hypersonic transitional boundary layers and that the program could be useful as a tool for detailed study of the intermittency of the transition region.

Kuhn, G. D.↗
NASA NTRS1971

Instructional television utilization in the United States

Various aspects of utilizing instructional television (ITV) are summarized and evaluated and basic guidelines for future utilization of television as an instructional medium in education are considered. The role of technology in education, capabilities and limitations of television as an instructional media system and the state of ITV research efforts are discussed. Examples of various ongoing ITV programs are given and summarized. The problems involved in the three stages of the ITV process (production, distribution, and classroom utilization) are presented. A summary analysis outlines probable trends in future utilization.

Dumolin, J. R.↗
NASA NTRS1973

An Iterative Approach to the Feature Selection Problem

The problem dealt with concerns feature selection or reducing the dimension of the data to be processed from n to k. By reducing the dimension of the data from n to k, classification time is generally reduced. Yet the dimension reduction should not be so great that classification accuracy is impaired. Thus, the general problem is considered of classifying an n-dimensional observation vector x into one of m-distinct classes where each class is normally distributed with mean and covariance. It is shown that the probability of misclassification is minimized if a maximum likelihood classification procedure is used to classify the data. The dimension of each observation vector to be processed is conveniently reduced by performing the transformation y = Bx, where B is a K by n matrix of rank k. Thus, the n-dimensional classification problem transforms into a k-dimensional classification problem.

Decell, H. P., Jr.↗
NASA NTRS1974

A Bayesian analysis of two probability models describing thunderstorm activity at Cape Kennedy, Florida

A Bayesian analysis of the two discrete probability models, the negative binomial and the modified negative binomial distributions, which have been used to describe thunderstorm activity at Cape Kennedy, Florida, is presented. The Bayesian approach with beta prior distributions is compared to the classical approach which uses a moment method of estimation or a maximum-likelihood method. The accuracy and simplicity of the Bayesian method is demonstrated.

Williford, W. O.↗
NASA NTRS1980

Cycles till failure of silver-zinc cells with completing failures modes: Preliminary data analysis

One hundred and twenty nine cells were run through charge-discharge cycles until failure. The experiment design was a variant of a central composite factorial in five factors. Preliminary data analysis consisted of response surface estimation of life. Batteries fail under two basic modes; a low voltage condition and an internal shorting condition. A competing failure modes analysis using maximum likelihood estimation for the extreme value life distribution was performed. Extensive diagnostics such as residual plotting and probability plotting were employed to verify data quality and choice of model.

Sidik, S. M.↗
NASA NTRS1983

Designing Glass Panels for Economy and Reliability

Analytical method determines probability of failure of rectangular glass plates subjected to uniformly distributed loads such as those from wind, earthquake, snow, and deadweight. Developed as aid in design of protective glass covers for solar-cell arrays and solar collectors, method is also useful in estimating the reliability of large windows in buildings exposed to high winds and is adapted to nonlinear stress analysis of simply supported plates of any elastic material.

Moore, D. M.↗
NASA NTRS1981

Icing tunnel tests of a composite porous leading edge for use with a liquid anti-ice system

The efficacy of liquid ice protection systems which distribute a glycol-water solution onto leading edge surfaces through a porous skin was demonstrated in tests conducted in the NASA Lewis icing research tunnel using a composite porous leading edge panels. The data obtained were compared with the performance of previously tested stainless steel leading edge with the same geometry. Results show: (1) anti-ice protection of a composite leading edge is possible for all the simulated conditions tested; (2) the glycol flow rates required to achieve anti-ice protection were generally much higher than those required for a stainless steel panel; (3) the low reservoir pressures of the glycol during test runs indicates that more uniform distribution of glycol, and therefore lower glycol flow rates, can probably be achieved by decreasing the porosity of the panel; and (4) significant weight savings can be achieved in fluid ice protection systems with composite porous leading edges. The resistance of composite panels to abrasion and erosion must yet be determined before they can be incorporated in production systems.

Kohlman, D. L.↗
NASA NTRS1984

Bidirectional Reflectance Modeling of Non-homogeneous Plant Canopies

Efforts to develop a three dimensional model to predict canopy, bidirectional reflectance for heterogenous plant stands using incident radiation and canopy structural descriptions as inputs are described. Utility programs were developed to cope with the complex output from the 3 dimensional model. In addition an attempt was made to define leaf and soil properties, which are appropriate to the mode, by measuring leaf and soil bidirectional reflectance distribution functions; since almost no data exist on these distributions. In the process it was realized that most models probably are using the wrong leaf spectral properties, and that off-nadir reflectance measurements are difficult to make because of non-Lambertian properties of reference surfaces. Also, in the visible wavebands, rough soil may not be distinguishable from canopies when viewed from above.

Norman, J. M.↗
NASA NTRS1984

An infrared study of the bi-polar outflow region GGD 12-15

Infrared observations from 1 to 100 microns are presented for the region associated with a bipolar CO outflow source near the nebulous objects GGD 12 to 15. A luminous far-infrared source was found associated with a radio-continuum source in the area. This object appears to be a compact HII region around a nearly main-sequence BO star. A faint 20 micron source was also discovered at the position of an H2O maser 3O deg northwest of the HII region. This object appears to be associated with but not coincident with a 2 micron reflection nebula. This structure serves as evidence for a non-spherically symmetric, possibly disk-like dust distribution around the exciting star for the maser. This object probably powers the bi-polar CO outflow although its luminosity is less than 10% that of the star which excites the compact HII region. A number of other 2 micron sources found in the area are probably members of a recently formed cluster.

Harvey, P. M.↗
NASA NTRS1985

An infrared study of the bipolar outflow region GGD 12-15

Infrared observations from 1 to 100 microns are presented for the region associated with a bipolar CO outflow source near the nebulous objects GGD 12 to 15. A luminous far-infrared source was found associated with a radio-continuum source in the area. This object appears to be a compact HII region around a nearly main-sequence BO star. A faint 20 micron source was also discovered at the position of an H2O maser 30 deg northwest of the HII region. This object appears to be associated with but not coincident with a 2 micron reflection nebula. This structure serves as evidence for a non-spherically symmetric, possibly disk-like dust distribution around the exciting star for the maser. This object probably powers the bi-polar CO outflow although its luminosity is less than 10 percent that of the star which excites the compact HII region. A number of other 2 micron sources found in the area are probably members of a recently formed cluster.

Harvey, P. M.↗
NASA NTRS1987

An overview of reliability methods in mechanical and structural design

An evaluation is made of modern methods of fast probability integration and Monte Carlo treatment for the assessment of structural systems' and components' reliability. Fast probability integration methods are noted to be more efficient than Monte Carlo ones. This is judged to be an important consideration when several point probability estimates must be made in order to construct a distribution function. An example illustrating the relative efficiency of the various methods is included.

Wirsching, P. H.↗
NASA NTRS1989

Report on the 2-D Model Intercomparison Workshop held January 11-16, 1987 in Fort Myers Beach, Florida, chapter 2

In the attempts to understand the processes which affect ozone in the stratosphere, and to predict future ozone levels, a variety of computer models were developed and employed. To oversimplify somewhat, the models range from 1-D models with intricately detailed photochemistry but only the crudest representation of transport, to 3-D general circulation models with intricately detailed dynamics and no photochemistry at all. Each of these has its appropriate uses. It was felt that there was much to be gained from intermediate models incorporating an extensive treatment of photochemistry with a dynamical framework which at least recognizes that atmospheric motions are advective as well as diffusive, and that both chemistry and dynamics are subject to latitudinal and seasonal variations. Thus the 2-D, zonally averaged models have begun to play a larger role in the last seven years, both in attempting to understand observed distributions of trace species and in attempting to assess the probable effects of antropogenic perturbations. There are many choices to be made in developing the model. It was the purpose of the 2-D model Intercomparison Workshop to permit discussion of the choices made and the behavior of the resulting models. The goal was not to identify a best set of choices, but rather to identify areas in which the models are sensitive to the choices made, and to develop a sense of where these models as a class do well or poorly in simulating the observed atmosphere.

Guthrie, Paul D.↗
NASA NTRS1989

Error detecting capabilities of the shortened Hamming codes adopted for error detection in IEEE Standard 802.3

The error-detecting capabilities of the shortened Hamming codes adopted for error detection in IEEE Standard 802.3 are investigated. These codes are also used for error detection in the data link layer of the Ethernet, a local area network. The weight distributions for various code lengths are calculated to obtain the probability of undetectable error and that of detectable error for a binary symmetric channel with bit-error rate between 0.00001 and 1/2.

Fujiwara, Toru↗
NASA NTRS1992

Incorporation of spatial information in Bayesian image reconstruction - The maximum residual likelihood criterion

We have developed a new figure of merit, a 'maximum-residual-likelihood' (MRL) statistic, for the goodness of fit for Bayesian image restoration which explicitly incorporates spatial information. The MRL constraint provides a natural means of incorporating the prior knowledge that the residuals contain no spatial structure through the autocorrelation function of the residuals. We demonstrate that this statistic follows a Chi-square distribution and that forcing this statistic to have its most probable value leads to a restored image whose residuals are consistent with the noise model. Our numerical experiments suggest that image restoration using the MRL statistic alone is numerically robust and produces results which are independent of the initial guess for the restored image. However, we caution that using the MRL statistic without an image prior can result in overresolution in low SNR portions of the image.

Pina, R. K.↗
NASA NTRS2002

Probabilistic Design of a Plate-Like Wing to Meet Flutter and Strength Requirements

An approach is presented for carrying out reliability-based design of a metallic, plate-like wing to meet strength and flutter requirements that are given in terms of risk/reliability. The design problem is to determine the thickness distribution such that wing weight is a minimum and the probability of failure is less than a specified value. Failure is assumed to occur if either the flutter speed is less than a specified allowable or the stress caused by a pressure loading is greater than a specified allowable. Four uncertain quantities are considered: wing thickness, calculated flutter speed, allowable stress, and magnitude of a uniform pressure load. The reliability-based design optimization approach described herein starts with a design obtained using conventional deterministic design optimization with margins on the allowables. Reliability is calculated using Monte Carlo simulation with response surfaces that provide values of stresses and flutter speed. During the reliability-based design optimization, the response surfaces and move limits are coordinated to ensure accuracy of the response surfaces. Studies carried out in the paper show the relationship between reliability and weight and indicate that, for the design problem considered, increases in reliability can be obtained with modest increases in weight.

Stroud, W. Jefferson↗