Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

The effect of thermal exposure on the mechanical properties of aluminum-graphite composites

To promote the development of aluminum-graphite composites with improved properties for aerospace applications, composite samples were fabricated by solid-state diffusion bonding of liquid-phase Al-infiltrated Thornel 50 fibers, and their mechanical properties were measured at room temperature in the as-received condition, after temperature exposure and after thermal cycling. The interface structure in aluminum-graphite composites and its effect on the composite properties, the effect of thermal cycling on the tensile properties of the composites, and the characteristics of failures of the composites in tension is discussed. The studied composites exhibited tensile properties corresponding well with those predicted by the rule of mixtures. Thermal cycling between 20 C and 500 C, as well as the formation of the Al4C3 at the Al-graphite interfaces at temperatures above 500 C resulted in degradation of the composite strength. Scanning electron microscopy of fractured surfaces indicated that the relatively weak interface governs the mode of failure in tension.

Khan, I. H.↗

A heuristic finite-state model of the human driver in a car-following situation

An approach to modeling human driver behavior in single-lane car following which is based on a finite-state decision structure is considered. The specific strategy at each point in the decision tree was obtained from observations of typical driver behavior. The synthesis of the decision logic is based on position and velocity thresholds and four states defined by regions in the phase plane. The performance of the resulting assumed intuitively logical model was compared with actual freeway data. The match of the model to the data was optimized by adapting the model parameters using a modified PARTAN algorithm. The results indicate that the heuristic model behavior matches actual car-following performance better during deceleration and constant velocity phases than during acceleration periods.

Burnham, G. O.↗

Thermodynamic and transport properties of fluids

Computer program subroutine FLUID calculates thermodynamic and transport properties of pure fluids in liquid, gas, or two-phase (liquid/gas) conditions. Program determines thermodynamic state from assigned values for temperature and density, pressure and density, temperature and pressure, pressure and entropy, or pressure and enthalpy.

Fessler, T. E.↗

Synchronous rotation in magnetic X-ray binaries

AM Herculis is thought to be a binary stellar system that contains an accreting magnetic degenerate dwarf whose rotation is synchronous with the orbital period. This synchronism is remarkable, particularly because of the small moment of inertia of a degenerate dwarf and the large specific angular momentum of the accreted matter. This paper demonstrates that ohmic dissipation from the magnetic interaction of the stars is capable of bringing about exact synchronism, provided that some other process has brought the rotation period of the degenerate dwarf to the same order of magnitude as the orbital period. It is also shown that magnetostatic interaction in the synchronous state leads to oscillatory drifts in phase about exact synchronism with periods of approximately 1-10 yr. These phase drifts could manifest themselves in long-term periodic variability in the X-ray or optical properties of the source. Accretion torques could excite such oscillatory motions but need not disrupt synchronism once it has been established.

Joss, P. C.↗

A new method of efficient heat transfer and storage at very high temperatures

A unique, high temperature (1000-2000 K) continuously operating capacitive heat exchanger system is described. The system transfers heat from a combustion or solar furnace to a working gas by means of a circulating high temperature molten refractory. A uniform aggregate of beads of a glass-like refractory is injected into the furnace volume. The aggregate is melted and piped to a heat exchanger where it is sprayed through a counter-flowing, high pressure working gas. The refractory droplets transfer their heat to the gas, undergoing a phase change into the solid bead state. The resulting high temperature gas is used to drive a suitable high efficiency heat engine. The solidified refractory beads are delivered back to the furnace and melted to continue the cycle. This approach avoids the important temperature limitations of conventional tube-type heat exchangers, giving rise to the potential of converting heat energy into useful work at considerably higher efficiencies than currently attainable and of storing energy at high thermodynamic potential.

Shaw, D.↗

Failure Detector for Power-Factor Controller

New protective circuits have been developed for power-factor ac motor controllers. Circuits prevent direct current and consequent motor heating that would normally result from failure of solid-state switch in controller. Single-phase power-factor controller with short detector compensates for short-circuit failure in either direction by applying full power to motor. Controller with open detector compensates for open-circuit failure in either direction by turning off power to motor.

Nola, F. J.↗

Simulation studies of a model of high-density metallic hydrogen

Upper bounds for the ground-state energies of liquid and solid phases of metallic hydrogen and metallic deuterium have been calculated with variational methods and Monte Carlo techniques. At four densities (0.8, 1.2, 1.36, and 1.488) crystalline phases are clearly preferred in the sense that the energy difference, when compared to the liquid, is in excess of the errors inherent in the numerical procedures. At a fifth density (1.6), the energy differences between solid and liquid phases are smaller than these errors.

Mon, K. K.↗

Studies of clusters in the gas phase and application to an understanding of transitions from gaseous to the surface and condensed state

Studies of the structure, stability, electronic properties, and formation kinetics of small clusters were reviewed which provide information useful in furthering understanding of nucleation processes, liquid state properties, and the nature of surfaces. Using mass spectrometric coupled with various high pressure ion clustering and Stark effect-molecular beam techniques, the details of the primary clustering steps leading to the nucleation of bulk liquid from the vapor were and obtained by direct observation results are presented.

Castleman, A. W., Jr.↗

NMR studies of electronic structure in crystalline and amorphous Zr2PdH/x/

The proton Knight shifts and spin-lattice relaxation times have been measured in crystalline and amorphous Ze2PdH(x). Core polarization from the Zr d-band dominates the proton hyperfine interactions. The density of Fermi level d-electron states is reduced in the amorphous phase relative to the electron density in crystalline Zr2PdH(x).

Bowman, R. C., Jr.↗

Matter antimatter domains: A possible solution to the CP domain wall problem in the early universe

An SU(5) grand unified theory model is used to show how the degeneracy between vacua with different spontaneously broken charge parity can be dynamically lifted by a condensate of heavy fermion pairs. This drives a phase transition to a unique vacuum state with definite charge parity. The transition eliminates the domain walls in a matter antimatter symmetric domain cosmology.

Mohanty, A. K.↗

DSA's subcarrier demodulation losses

The degradation in bit error rate performance due to imperfect subcarrier tracking by the Demodulation Synchronization Assembly (DSA) is investigated. Results apply to any type of digital loop and received signal dynamics. A type four loop causes the least amount of loss, because it tracks phase jerk with zero steady-state error. However, when frequency rate and frequency acceleration are as large as in the extended Magellan mission, it will be necessary to decrease the loop update time in order to minimize the losses.

Simon, M.↗

Time-dependent interstellar chemistry

Some current problems in interstellar chemistry are considered in the context of time-dependent calculations. The limitations of steady-state models of interstellar gas-phase chemistry are discussed, and attempts to chemically date interstellar clouds are reviewed. The importance of studying the physical and chemical properties of interstellar dust is emphasized. Finally, the results of a series of studies of collapsing clouds are described.

Glassgold, A. E.↗

Interactions between stationary planetary waves in the stratosphere

The interactions between stationary planetary waves 1 and 2 are investigated using a truncated quasi-geostrophic model in a midlatitude beta channel. The model includes eight interacting horizontal modes with three zonal wave numbers and two meridional scales in a quasi-geostrophic beta channel 40 deg wide; all wave-wave interactions in the model are a result of dissipation. The procedures for solving the model equations are examined. The theory of dissipation-induced interactions is discussed in terms of interactions between weak waves under severe truncation. The behavior of small amplitude waves 1 and 2 in basic states is discussed; it is observed that wave 1 is amplified in a wave 2 basic state, and a wave 2 disturbance in a wave 1 basic state is affected by the relative phases of the waves. The dynamics of these wave interactions are analyzed using potential enstrophy budgets of the waves. The relevance of the waves to the atmosphere is studied. It is noted that the wave behavior is a combination of the linear results with an amplification of wave 1 and a strong dependence on the relative phases of waves 1 and 2 in the stratosphere.

Robinson, W. A.↗

Advanced altimetry

The radar altimeter being developed for the Ocean Topography Experiment (TOPEX) will have an inherent instrument precision of 2 to 3 cm. While some minor refinements may be possible in the future, major geophysical advances could be made if altimetric measurements over a wide swath of the Earth's surface were possible. The NASA Headquarters Oceanic Processes Branch is supporting a 3-year investigation of the technological issues inherent in the precision measurement of topography from spaceborne platforms at angles off-nadir. To explore the off-nadir measurement of topography, a flexible, airborne radar instrument system is being developed. Its hardware design is now complete, and it is made up of several subsystems. The antenna selected is a dielectric lens of .894 m diameter. The RF subsystem uses phase-locked oscillators, FET solid-state amplifiers, and times four frequency multipliers to develop a transmit signal at a frequency of 36.0 GHz and a local oscillator signal at a frequency of 35.4 GHz. Lecroy 6880 digitizers under computer control digitize the five receiver outputs. The digital subsystem consists of six single-board Heurikon processors. At this time, the instrument construction continues with final system integration planned for November 1988.

Parsons, C. L.↗

A spectrophotometric study of IR Gem at outburst and quiescence

Optical spectra with 2.5-A resolution obtained throughout the orbit of IR Gem during a five-day sequence beginning at an outburst state and ending at quiescence are compared with B magnitude and IUE spectra obtained throughout other quiescent-state orbits. No obvious second component is found in the emission lines. In contrast to previous results, little high-excitation He II 4686-A emission is noted, and no variation of the equivalent widths of the Balmer emission is found over the orbital cycle. The results suggest that large changes in the excitation level and in the modulation from a heated zone can take place during different quiescent states, possibly due to the interoutburst phase.

Feinswog, Laurie↗

System feasibility study of a microwave/millimeter-wave radar for space debris tracking

A 35 GHz millimeter-wave radar system has been studied for space debris tracking. The objective is to track the particles ranging in size from 4 mm to 80 mm up to a range of 25 km. The system requires various state-of-the-art technologies including phased arrays, monopulse tracking, pulse compression, high power transmitters, low noise receivers, and pulse integration signal processing techniques.

Chang, Kai↗

In Situ deposition of YBCO high-T(sub c) superconducting thin films by MOCVD and PE-MOCVD

Metalorganic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T( sub c) greater than 90 K and Jc approx. 10 to the 4th power A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metalorganic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology.

Zhao, J.↗

Period Modulation For Telemetry

In innovative telemetry scheme, time between pulses of light transmitted along optical fiber represents measured quantity. In period modulator, time varied by varying control-input voltage, which serves as critical voltage of relaxation oscillator. Demodulator is simple state estimator, no discriminator or phase-locked loop needed. Applicable to radio or wire transmission. Pulses proportional to temperature, pressure, voltage, or other variable monitored remotely.

Kirkham, Harold↗