Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Microwave properties of epitaxial (111)-oriented Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} thin films on Al{sub 2}O{sub 3}(0001) up to 40 GHz

Perovskite Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} (BST) thin films have been grown on Al{sub 2}O{sub 3}(0001) substrates without/with inserting an ultrathin TiO{sub x} seeding layer by rf magnetron sputtering. X-ray diffraction and pole figure studies reveal that the film with the TiO{sub x} layer (12-A-thick) is highly oriented along the (111) direction and exhibits a good in-plane relationship of BST(111)||Al{sub 2}O{sub 3}(0001). The high frequency dielectric measurements demonstrate that the complex permittivity ({epsilon}={epsilon}{sup '}-j{epsilon}{sup ''}) is well described by a Curie-von Scheidler dispersion with an exponent of 0.40. The resulting epitaxial BST films show high permittivity ({approx}428) and tunability ({approx}41%, at 300 kV/cm and 40 GHz) and their microwave properties (1-40 GHz) potentially could be made suitable for tunable devices.

36 MATERIALS SCIENCE↗

Domain wall assisted magnetization switching in (111) oriented L1{sub 0} FePt grown on a soft magnetic metallic glass

We report on growth and magnetic properties of exchange-coupled (111)-L1{sub 0} FePt hard/CoFeTaB soft magnetic metallic glass bilayered structure processed at lower temperature ({approx}400 deg. C). Single phaselike hysteresis loops with tailorable coercivity (<8.2 kOe) in out of plane direction are obtained. The magnetization switching mechanism is identified as domain wall assisted. In views of excellent nanofabrication abilities of metallic glass thin film and the ability to grow preferred oriented L1{sub 0} FePt, the present bilayered structure is very promising for the fabrication of high density bit--patterned magnetic recording media and other spintronic devices.

36 MATERIALS SCIENCE↗

Temperature-dependent H{sub 2} gas-sensing properties of fabricated Pd nanowires using highly oriented pyrolytic graphite

Horizontal palladium (Pd) nanowires and Pd nanoparticles were successfully fabricated directly on highly oriented pyrolytic graphite depending on the electrodeposition time using palladium nitrate [Pd(NO{sub 2}){sub 3}] solution at room temperature, and the temperature-dependent hydrogen (H{sub 2}) sensing properties of these structures were investigated in the concentration range of 50-5000 ppm. Pd nanowires and Pd nanoparticles were fabricated on a graphite surface by applying triple-pulsed potential with varying the electrodeposition time from 400 to 600 s. The fabricated Pd nanowires were characterized by scanning electron microscopy and energy-dispersive x-ray spectroscopy. It was found that the nanowire arrays were continuous, parallel to each other and ordered after an electrodeposition time of 600 s. The diameters of the Pd nanowires and Pd nanoparticles are observed in the range of 70-180 nm. The H{sub 2} sensing properties of these structures were determined with variation in resistance measurements. It was observed that the limit of detection is lower than 50 ppm H{sub 2}, the sensor response was approximately 2% for 1000 ppm H{sub 2} at room temperature, and the sensor response was decreased with increasing temperature.

36 MATERIALS SCIENCE↗

Magnetic anisotropy in (Ga,Mn)As grown on vicinal GaAs: Effects of the orientation of microwave magnetic field

Ferromagnetic resonance (FMR) study of the magnetic anisotropy in epitaxial (Ga,Mn)As grown on vicinal GaAs is presented. The data collected in the growth plane reveal very limited dependence on the miscut angle {eta}, with a negligible effect of {eta} on the in-plane uniaxial anisotropy. In the out-of-plane configuration, the substrate misorientation has a pronounced influence on FMR, which features are partially explained with a phenomenological treatment of the atomic step-induced anisotropy. This simple model, however, does not account for the miscut-induced dependence of FMR on the orientation of microwave magnetic field, that is observed with the static field applied invariably along the growth direction.

36 MATERIALS SCIENCE↗

Phonon-limited and effective low-field mobility in n- and p-type [100]-, [110]-, and [111]-oriented Si nanowire transistors

In this work, ultrascaled n- and p-type Si nanowire field-effect transistors (NW FETs) with [100], [110], and [111] as channel orientations are simulated in the presence of electron-phonon scattering using an atomistic quantum transport solver based on the sp 3 d 5 s* tight-binding model for electrons and holes, a modified Keating model for phonons, and the nonequilibrium Green’s function formalism. The channel resistances of devices with different gate lengths and carrier concentrations are computed at room temperature and used to extract phonon-limited, ballistic, and effective low-field mobilities. It is discovered that a [110] channel represents the best choice for high n- and p-type NW FET performances.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanisms of edge-dislocation formation in strained films of zinc blende and diamond cubic semiconductors epitaxially grown on (001)-oriented substrates

Ninety degree edge misfit dislocations (MDs) are 'sessile' dislocations; such dislocations, however, were found in large amounts in relaxed films. The commonly accepted formation mechanism of such dislocations is an interaction of two complementary 60 deg. dislocations with appropriate Burger's vectors, for example: a/2[101] + a/2 [011] = a/2 [110]. In the present study, four possible types of interaction were analyzed: (i) random meeting of two complementary MDs; (ii) crossing of two complementary 60 deg. MDs in the vicinity of film-substrate interface in systems grown on substrates misoriented from exact (001) orientation; (iii) formation of edge MDs during cross-slipping of a secondary MD; and (iv) induced nucleation of a secondary complementary 60 deg. MD. Examples of discussed interactions are given. Contrary to the widespread opinion that edge MDs in GeSi and InGaAs films grown by MBE on Si and GaAs substrates predominantly form under elastic strains greater than 2% and at the final stage of plastic relaxation, in the present study, we show that such dislocations may also form at an early stage of plastic relaxation in films with less-than-1% lattice misfit with substrate. A necessary condition for that is a sufficient amount of 60 deg. dislocations available in the system by the moment the strained film starts growing. Dislocations (60 deg. ) can be introduced into the system using a preliminarily grown, partially or fully relaxed buffer layer. This layer serves as a source of threading dislocations for the next growing layer that favor the formation of paired complementary MDs and their 'reagents', edge MDs, at the interface with growing film.

36 MATERIALS SCIENCE↗

Growth of (111) oriented NiFe{sub 2}O{sub 4} polycrystalline thin films on Pt (111) via sol-gel processing

Polycrystalline NiFe{sub 2}O{sub 4} (NFO) thin films are grown on (111) platinized Si substrates via chemical solution processing. {theta}-2{theta} x-ray diffraction, x-ray pole figures and electron diffraction indicate that the NFO has a high degree of <111> uniaxial texture normal to the film plane. The texturing is initiated by nucleation of (111) planes at the Pt interface and is enhanced with decreasing film thickness. As the NFO magnetic easy-axis is <111>, the out-of-plane magnetization exhibits improved M{sub r}/M{sub s} and coercivity with respect to randomly oriented films on silicon substrates. The out-of-plane M{sub r}/M{sub s} ratio for (111) textured NFO thin film is improved from 30% in 150 nm-thick films to above 70% in 50 nm-thick films. The improved out-of-plane magnetic anisotropy is comparable to epitaxial NFO films of comparable thickness deposited by pulsed laser deposition and sputtering.

36 MATERIALS SCIENCE↗

High electron mobility through the edge states in random networks of c-axis oriented wedge-shaped GaN nanowalls grown by molecular beam epitaxy

Transport and optical properties of random networks of c-axis oriented wedge-shaped GaN nanowalls grown spontaneously on c-plane sapphire substrates through molecular beam epitaxy are investigated. Our study suggests a one dimensional confinement of carriers at the top edges of these connected nanowalls, which results in a blue shift of the band edge luminescence, a reduction of the exciton-phonon coupling, and an enhancement of the exciton binding energy. Not only that, the yellow luminescence in these samples is found to be completely suppressed even at room temperature. All these changes are highly desirable for the enhancement of the luminescence efficiency of the material. More interestingly, the electron mobility through the network is found to be significantly higher than that is typically observed for GaN epitaxial films. This dramatic improvement is attributed to the transport of electrons through the edge states formed at the top edges of the nanowalls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly oriented {delta}-Bi{sub 2}O{sub 3} thin films stable at room temperature synthesized by reactive magnetron sputtering

We report the synthesis by reactive magnetron sputtering and structural characterization of highly (111)-oriented thin films of {delta}-Bi{sub 2}O{sub 3}. This phase is obtained at a substrate temperature of 150-200 Degree-Sign C in a narrow window of O{sub 2}/Ar ratio in the sputtering gas (18%-20%). Transmission electron microscopy and x-ray diffraction reveal a polycrystalline columnar structure with (111) texture. The films are stable from room temperature up to 250 Degree-Sign C in vacuum and 350 Degree-Sign C in ambient air.

36 MATERIALS SCIENCE↗

Tuning magnetic anisotropy in (001) oriented L1{sub 0} (Fe{sub 1-x}Cu{sub x}){sub 55}Pt{sub 45} films

We have achieved (001) oriented L1{sub 0} (Fe{sub 1-x}Cu{sub x}){sub 55}Pt{sub 45} thin films, with magnetic anisotropy up to 3.6 Multiplication-Sign 10{sup 7} erg/cm{sup 3}, using atomic-scale multilayer sputtering and post annealing at 400 Degree-Sign C for 10 s. By fixing the Pt concentration, structure and magnetic properties are systematically tuned by the Cu addition. Increasing Cu content results in an increase in the tetragonal distortion of the L1{sub 0} phase, significant changes to the film microstructure, and lowering of the saturation magnetization and anisotropy. The relatively convenient synthesis conditions, along with the tunable magnetic properties, make such materials highly desirable for future magnetic recording technologies.

36 MATERIALS SCIENCE↗

Orientation dependent band alignment for p-NiO/n-ZnO heterojunctions

Nonpolor a-plane and polar c-plane ZnO thin films were prepared on r-plane sapphire and quartz substrates, respectively. The electronic structure of the interface between subsequently fabricated NiO/ZnO heterojunctions has been investigated by x-ray photoelectron spectroscopy measurements and the band offsets are determined together with information yielded from UV-vis transition spectra. It is found that a type-II band alignment forms at the interface for both the samples. The revealed ZnO-orientation dependent band offsets are analyzed and are attributed mainly due to the variations in internal electric field arose from spontaneous polarization effect. The accurate determination of the band alignment is important for the design and application of NiO/ZnO based hybrid devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical Response of Oriented and Highly Anisotropic Subwavelength Metallic Nanostructure Arrays

Here we describe the optical transmission response of novel coatings with subwavelength metallic structures based on a quasi-open ring resonator design fabricated via a combination of nanoimprint lithography and metal sputtering. This offers a relatively simple approach to the fabrication of dense arrays of optically responsive subwavelength structures over large areas with an oriented two-dimensional array of parallel Au nanoshells. The cross-section of the individual lines is “L” shaped with an approximately 95 nm width, 75 nm height, and pitch of 140 nm to yield a resonant optical response in the visible/near infrared spectrum. Along the long axis of the shells, the geometry is wire-like and quasi-infinite in length compared to the cross-section. This highly anisotropic structure has a strongly polarization-dependent optical response. The coatings are characterized via optical transmission measurements as a function of wavelength, polarization, and angle are presented along with complementary numerical modeling results predicting the resonance shift with corresponding changes in fabrication parameters.

nanostructure, subwavelength, optics, resonance↗

Highly c-axis oriented growth of GaN film on sapphire (0001) by laser molecular beam epitaxy using HVPE grown GaN bulk target

Growth temperature dependant surface morphology and crystalline properties of the epitaxial GaN layers grown on pre-nitridated sapphire (0001) substrates by laser molecular beam epitaxy (LMBE) were investigated in the range of 500–750 °C. The grown GaN films were characterized using high resolution x-ray diffraction, atomic force microscopy (AFM), micro-Raman spectroscopy, and secondary ion mass spectroscopy (SIMS). The x-ray rocking curve full width at a half maximum (FWHM) value for (0002) reflection dramatically decreased from 1582 arc sec to 153 arc sec when the growth temperature was increased from 500 °C to 600 °C and the value further decreased with increase of growth temperature up to 720 °C. A highly c-axis oriented GaN epitaxial film was obtained at 720 °C with a (0002) plane rocking curve FWHM value as low as 102 arc sec. From AFM studies, it is observed that the GaN grain size also increased with increasing growth temperature and flat, large lateral grains of size 200-300 nm was obtained for the film grown at 720 °C. The micro-Raman spectroscopy studies also exhibited the high-quality wurtzite nature of GaN film grown on sapphire at 720 °C. The SIMS measurements revealed a non-traceable amount of background oxygen impurity in the grown GaN films. The results show that the growth temperature strongly influences the surface morphology and crystalline quality of the epitaxial GaN films on sapphire grown by LMBE.

36 MATERIALS SCIENCE↗

Low-energy D{sup +} and H{sup +} ion irradiation effects on highly oriented pyrolytic graphite

We have investigated the low-energy (100 eV) D{sup +} and H{sup +} ion irradiation effects on the structural and chemical properties of highly oriented pyrolytic graphite (HOPG). Structural disorder due to the ion irradiation was identified by the Raman spectroscopy, the D{sup +} irradiation giving rise to greater structural disorder than the H{sup +} irradiation. Only sp{sup 2} bonding was identified in the X-ray photoemission spectroscopy of the D{sup +}-irradiated HOPG, indicating no change in the surface chemical structure. The H{sup +} irradiation, on the other hand, gave rise to sp{sup 3} bonding and π−π{sup *} transition, the sp{sup 3} bonding increasing with increasing irradiation dose. It is thus shown that the chemical properties of the HOPG surface may be sensitively modified by the low-energy H{sup +} ion irradiation, but not by the low-energy D{sup +} ion irradiation.

36 MATERIALS SCIENCE↗

Some aspects of the orientational order distribution of flexible chains in a diblock mesophase

The segmental motions of flexible chains in the lamellar structure of a strongly segregated poly(styrene)-poly(dimethylsiloxane) (PS-PDMS) diblock were investigated over a time scale of a few tens of microseconds. {sup 2}H NMR experiments were performed on the PDMS block, selectively perdeuterated. Transverse relaxation measurements show that the main part of the PDMS repeat units display anisotropic reorientational motions within the diblock lamellae and such a segmental ordering essentially results from interchain steric repulsions. {sup 2}H double quantum-based experiments evidenced a non-uniform local stretching of PDMS chains and enabled the underlying distribution of the orientational order parameter to be determined quantitatively. Besides, a fraction of the PDMS chain segments, about 14%, were found to display isotropic – or nearly isotropic – reorientations, which could be assigned to repeat units located within a thin sublayer (about 1–2 nm) at the lamellae midplane, but also deeper in the lamellae, close to folded parts of the chains. These experimental results were confronted to theoretical descriptions of opposing polymer brushes and, in particular, to the strong-stretching theory (SST) including the entropic contribution of free chain ends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Entangled polymer chain melts: orientation and deformation dependent tube confinement and interchain entanglement elasticity

The phenomenological reptation-tube model is based on a single chain perspective and was originallyproposed to explain the remarkable viscoelastic properties of dense entangled polymer liquids.However, simulations over the last two decades have revealed a fundamental tension in the model: itassumes that bonded, single-chain backbone stresses are the sole polymer contribution to the slowlyrelaxing component of stress storage and elasticity, but mounting evidence suggests that at the locallevel of forces it is interchain contributions that dominate, as in simple liquids. Here we showthat based on a chain model constructed at the level of self-consistently determined primitive paths,an explicit force-level treatment of the correlated intermolecular contributions to stress that arisefrom chain uncrossability can essentially quantitatively predict the entanglement plateau modulusassociated with the soft rubbery response of polymer liquids. Analogies to transient localization andelasticity in glass-forming liquids are identified. Predictions for the effect of macroscopic deformationand anisotropic orientational order on the tube diameter are also made. Based on the interchainstress perspective the theory reproduces some aspects of the rheological response to shear and extensionaldeformations associated with the single chain tube model.

Sussman, Daniel↗

Effect of Ti seed layers on structure of self-organized epitaxial face-centered-cubic-Ag(001) oriented nanodots

The influence of Ti seed layers on the structure of self-organized Ag nanodots, obtained with a Ti seed-layer-assisted thermal agglomeration method, has been investigated. The samples were grown on MgO(001) single crystal substrates by RF magnetron sputter deposition. The samples were deposited at room temperature and post-annealed at 350 °C for 4 h while maintaining the chamber vacuum conditions. The results of atomic force microscopy (AFM) observations indicated that the insertion of the Ti seed layer (0.6–5.0 nm) between the MgO substrate and Ag layer promotes the agglomeration process, forming the nanodot array. Comparisons between the AFM images revealed that the size of the Ag nanodots was increased with an increase in the Ti seed layer thickness. The atomic concentration of the film surface was confirmed by X-ray photoelectron spectroscopy (XPS). The XPS result suggested that the nanodot surface mainly consisted of Ag. Moreover, X-ray diffraction results proved that the initial deposition of the Ti seed layer (0.6–5.0 nm) onto MgO(001) prior to the Ag deposition yielded high-quality fcc-Ag(001) oriented epitaxial nanodots. The optical absorbance spectra of the fabricated Ag nanodots with various Ti seed layer thicknesses were obtained in the visible light range.

36 MATERIALS SCIENCE↗

Superior dielectric properties for template assisted grown (100) oriented Gd{sub 2}O{sub 3} thin films on Si(100)

We report about the single crystalline growth and dielectric properties of Gd{sub 2}O{sub 3}(100) thin films on Si(100) surface. Using a two step molecular beam epitaxy growth process, we demonstrate that controlled engineering of the oxide/Si interface is a key step to achieve the atypical (100) oriented growth of Gd{sub 2}O{sub 3}. Unusually, high dielectric constant values (∼23–27) were extracted from capacitance voltage measurements. Such effect can be understood in terms of a two dimensional charge layer at the Gd{sub 2}O{sub 3}/Si interface (W. Sitaputra and R. Tsu, Appl. Phys. Lett. 101, 222903 (2012)) which can influence the dielectric properties of the oxide layer by forming an additional negative quantum capacitance.

36 MATERIALS SCIENCE↗