Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optimized”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Dual structural-control optimization of large space structures

A new approach is proposed for solving dual structural-control optimization problems for high-order flexible space structures where reduced-order structural models are employed. For a given initial structural dessign, a quadratic control cost is minimized subject to a constant-mass constraint. The sensitivity of the optimal control cost with respect to the stuctural design variables is then determined and used to obtain successive structural redesigns using a contrained gradient optimization algorithm. This process is repeated until the constrained control cost sensitivity becomes negligible. A numerical example is presented which demonstrates that this new approach effectively addresses the problem of dual optimization for potentially very high-order structures.

Messac, A.↗
NASA NTRS1984

Structural optimization with constraints on transients response

An exceptionally elegant method for structural optimization with constraints on the static response presented by Shield and Prager is discussed. Their derivation of the optimality condition was facilitated by a reformulation of the structural elasticity equations in terms of what was then a new variational principle, the principle of stationary mutual potential energy. Their optimality condition relates the design variable to an appropriately defined mutual strain energy. An alternative but related approach, based upon the principle of stationary mutual complementary energy, presented by N. C. Haung, is also discussed. The simplicity of these principles lies in the facts that the energy functionals are stationary at the solution to the field equations and that their stationary value is proportional to the quantity to be optimized.

Reiss, R.↗
NASA NTRS1984

Problems in large-scale structural optimization

A general design optimization model for large complex systems is defined. Major features of the model that challenge various optimization algorithms are discussed. Requirements of a model optimization algorithm are identified. Objectives of the study of various algorithms are defined and a basis for conducting such a study is developed. Primal as well as transformation methods are analytically studied and a unified viewpoint of various methods is presented. Several numerical examples are solved using different methods to study their performance. Conclusions drawn from the study are presented and discussed. Areas of future research in nonlinear programming as well as structural optimization are identified and discussed.

Arora, J. S.↗
NASA NTRS1984

Fundamental differences between optimization code test problems in engineering applications

The purpose here is to suggest that there is at least one fundamental difference between the problems used for testing optimization codes and the problems that engineers often need to solve; in particular, the level of precision that can be practically achieved in the numerical evaluation of the objective function, derivatives, and constraints. This difference affects the performance of optimization codes, as illustrated by two examples. Two classes of optimization problem were defined. Class One functions and constraints can be evaluated to a high precision that depends primarily on the word length of the computer. Class Two functions and/or constraints can only be evaluated to a moderate or a low level of precision for economic or modeling reasons, regardless of the computer word length. Optimization codes have not been adequately tested on Class Two problems. There are very few Class Two test problems in the literature, while there are literally hundreds of Class One test problems. The relative performance of two codes may be markedly different for Class One and Class Two problems. Less sophisticated direct search type codes may be less likely to be confused or to waste many function evaluations on Class Two problems. The analysis accuracy and minimization performance are related in a complex way that probably varies from code to code. On a problem where the analysis precision was varied over a range, the simple Hooke and Jeeves code was more efficient at low precision while the Powell code was more efficient at high precision.

Eason, E. D.↗
NASA NTRS1987

Sensitivity and optimization of composite structures using MSC/NASTRAN

Design sensitivity analysis for composites will soon be available in MSC/NASTRAN. The design variables for composites can be lamina thicknesses, orientation angles, material properties or a combination of all three. With the increasing use of composites in aerospace and automotive industries, this general capability can be used in its own right for carrying out sensitivity analysis of complicated real-life structures. As part of a research effort, the sensitivity analysis was coupled with a general purpose optimizer. This preliminary version of the optimizer is capable of dealing with minimum weight structural design with a rather general design variable linking capability at the element level or system level. Only sizing type of design variables (i.e., lamina thicknesses) can be handled by the optimizer. Test cases were run and validated by comparison with independent finite element packages. The linking of design sensitivity capability for composites in MSC/NASTRAN with an optimizer would give designers a powerful automated tool to carry out practical opitmization design of real-life complicated composite structures.

Nagendra, Gopal K.↗
NASA NTRS1987

Sensitivity derivatives and optimization of nodal point locations for vibration reduction

A method is developed for sensitivity analysis and optimization of nodal point locations in connection with vibration reduction. A straightforward derivation of the expression for the derivative of nodal locations is given, and the role of the derivative in assessing design trends is demonstrated. An optimization process is developed which uses added lumped masses on the structure as design variables to move the node to a preselected location; for example, where low response amplitude is required or to a point which makes the mode shape nearly orthogonal to the force distribution, thereby minimizing the generalized force. The optimization formulation leads to values for added masses that adjust a nodal location while minimizing the total amount of added mass required to do so. As an example, the node of the second mode of a cantilever box beam is relocated to coincide with the centroid of a prescribed force distribution, thereby reducing the generalized force substantially without adding excessive mass. A comparison with an optimization formulation that directly minimizes the generalized force indicates that nodal placement gives essentially a minimum generalized force when the node is appropriately placed.

Pritchard, Jocelyn I.↗
NASA NTRS1987

Distributed computer system enhances productivity for SRB joint optimization

Initial calculations of a redesign of the solid rocket booster joint that failed during the shuttle tragedy showed that the design had a weight penalty associated with it. Optimization techniques were to be applied to determine if there was any way to reduce the weight while keeping the joint opening closed and limiting the stresses. To allow engineers to examine as many alternatives as possible, a system was developed consisting of existing software that coupled structural analysis with optimization which would execute on a network of computer workstations. To increase turnaround, this system took advantage of the parallelism offered by the finite difference technique of computing gradients to allow several workstations to contribute to the solution of the problem simultaneously. The resulting system reduced the amount of time to complete one optimization cycle from two hours to one-half hour with a potential of reducing it to 15 minutes. The current distributed system, which contains numerous extensions, requires one hour turnaround per optimization cycle. This would take four hours for the sequential system.

Rogers, James L., Jr.↗
NASA NTRS1987

Optimal signal-to-noise in digital phase lock amplifiers

An expression for the optimal signal-to-noise ratio for linear phase lock amplifiers is derived. In its digital form the optimal method can be implemented by real-time signal processing techniques. The case of detector-noise-limited systems is analyzed in detail; it is found that the optimal technique can be used to eliminate effectively the detector's time constant from the set of parameters determining the overall efficiency. This has important implications for optical detection system design. Also reported is an experimental verification of the optimal method, thus establishing its practicality.

Doering, Charles R.↗
NASA NTRS1987

A method for nonlinear optimization with discrete design variables

A numerical method is presented for the solution of nonlinear discrete optimization problems. The applicability of discrete optimization to engineering design is discussed, and several standard structural optimization problems are solved using discrete design variables. The method uses approximation techniques to create subproblems suitable for linear mixed-integer programming methods. The method employs existing software for continuous optimization and integer programming.

Olsen, Gregory R.↗
NASA NTRS1987

Optimal heading change with minimum energy loss for a hypersonic gliding vehicle

A three state model is presented for analyzing the problem of optimal changes in heading with minimum energy loss for a hypersonic gliding vehicle. A further model order reduction to a single state model is examined using singular perturbation theory. The optimal solution for the reduced problem defines an optimal altitude profile dependent on the current energy of the vehicle, and the corresponding optimal lift and bank angle. A separate boundary layer analysis, based on an expansion of the necessary conditions about the reduced solution, is used to account for altitude and flight path angle dynamics and to derive a guidance law in feedback form. The guidance law is evaluated for a hypothetical vehicle.

Calise, Anthony J.↗
NASA NTRS1987

Optimal application of Morrison's iterative noise removal for deconvolution. Appendices

Morrison's iterative method of noise removal, or Morrison's smoothing, is applied in a simulation to noise-added data sets of various noise levels to determine its optimum use. Morrison's smoothing is applied for noise removal alone, and for noise removal prior to deconvolution. For the latter, an accurate method is analyzed to provide confidence in the optimization. The method consists of convolving the data with an inverse filter calculated by taking the inverse discrete Fourier transform of the reciprocal of the transform of the response of the system. Various length filters are calculated for the narrow and wide Gaussian response functions used. Deconvolution of non-noisy data is performed, and the error in each deconvolution calculated. Plots are produced of error versus filter length; and from these plots the most accurate length filters determined. The statistical methodologies employed in the optimizations of Morrison's method are similar. A typical peak-type input is selected and convolved with the two response functions to produce the data sets to be analyzed. Both constant and ordinate-dependent Gaussian distributed noise is added to the data, where the noise levels of the data are characterized by their signal-to-noise ratios. The error measures employed in the optimizations are the L1 and L2 norms. Results of the optimizations for both Gaussians, both noise types, and both norms include figures of optimum iteration number and error improvement versus signal-to-noise ratio, and tables of results. The statistical variation of all quantities considered is also given.

Ioup, George E.↗
NASA NTRS1988

Optimal placement of tuning masses for vibration reduction in helicopter rotor blades

Described are methods for reducing vibration in helicopter rotor blades by determining optimum sizes and locations of tuning masses through formal mathematical optimization techniques. An optimization procedure is developed which employs the tuning masses and corresponding locations as design variables which are systematically changed to achieve low values of shear without a large mass penalty. The finite-element structural analysis of the blade and the optimization formulation require development of discretized expressions for two performance parameters: modal shaping parameter and modal shear amplitude. Matrix expressions for both quantities and their sensitivity derivatives are developed. Three optimization strategies are developed and tested. The first is based on minimizing the modal shaping parameter which indirectly reduces the modal shear amplitudes corresponding to each harmonic of airload. The second strategy reduces these amplitudes directly, and the third strategy reduces the shear as a function of time during a revolution of the blade. The first strategy works well for reducing the shear for one mode responding to a single harmonic of the airload, but has been found in some cases to be ineffective for more than one mode. The second and third strategies give similar results and show excellent reduction of the shear with a low mass penalty.

Pritchard, Jocelyn I.↗
NASA NTRS1987

Sensitivity analysis and optimization of nodal point placement for vibration reduction

A method is developed for sensitivity analysis and optimization of nodal point locations in connection with vibration reduction. A straightforward derivation of the expression for the derivative of nodal locations is given, and the role of the derivative in assessing design trends is demonstrated. An optimization process is developed which uses added lumped masses on the structure as design variables to move the node to a preselected location - for example, where low response amplitude is required or to a point which makes the mode shape nearly orthogonal to the force distribution, thereby minimizing the generalized force. The optimization formulation leads to values for added masses that adjust a nodal location while minimizing the total amount of added mass required to do so. As an example, the node of the second mode of a cantilever box beam is relocated to coincide with the centroid of a prescribed force distribution, thereby reducing the generalized force substantially without adding excessive mass. A comparison with an optimization formulation that directly minimizes the generalized force indicates that nodal placement gives essentially a minimum generalized force when the node is appropriately placed.

Pritchard, J. I.↗
NASA NTRS1988

Optimal experiment design for identification of large space structures

The optimal experiment design for on-orbit identification of modal frequency and damping parameters in large flexible space structures is discussed. The main result is a separation principle for D-optimal design which states that under certain conditions the sensor placement problem is decoupled from the input design problem. This decoupling effect significantly simplifies the overall optimal experiment design determination for large MIMO structural systems with many unknown modal parameters. The error from using the uncoupled design is estimated in terms of the inherent damping of the structure. A numerical example is given, demonstrating the usefulness of the simplified criteria in determining optimal designs for on-orbit Space Station identification experiments.

Bayard, D. S.↗
NASA NTRS1988

A near optimal guidance algorithm for aero-assisted orbit transfer

The paper presents a near optimal guidance algorithm for aero-assited orbit plane change, based on minimizing the energy loss during the atmospheric portion of the maneuver. The guidance algorithm makes use of recent results obtained from energy state approximations and singular perturbation analysis of optimal heading change for a hypersonic gliding vehicle. This earlier work ignored the terminal constraint on altitude needed to insure that the vehicle exits that atmosphere. Thus, the resulting guidance algorithm was only appropriate for maneuvering reentry vehicle guidance. In the context of singular perturbation theory, a constraint on final altitude gives rise to a difficult terminal boundary layer problem, which cannot be solved in closed form. This paper will demonstrate the near optimality of a predictive/corrective guidance algorithm for the terminal maneuver. Comparisons are made to numerically optimized trajectories for a range or orbit plane angles.

Calise, Anthony J.↗
NASA NTRS1988

Optimal reentry guidance for aeroassisted orbit transfer vehicles

A three-state model is presented for analyzing the problem of optimal changes in heading with minimum energy loss for a hypersonic gliding vehicle. A further model order reduction to a single state model is examined using singular perturbation theory. The optimal solution for the reduced problem defines an optimal altitude profile dependent on the current energy of the vehicle. A separate boundary-layer analysis is used to account for altitude and flight path angle dynamics, and to obtain lift and bank angle control solutions. By considering alternative approximations to solve the boundary-layer problem, three guidance laws are obtained, each having a feedback form. The guidance laws are evaluated for a hypothetical vehicle, and compared to an optimal solution obtained using a multiple shooting algorithm.

Calise, Anthony J.↗
NASA NTRS1988

Trajectory optimization and guidance law development for national aerospace plane applications

The problem of onboard trajectory optimization for an airbreathing, single-stage-to-orbit vehicle is examined. A simple model representative of the aerospace plane concept, including a dual-mode propulsion system composed of scramjet and rocket engines, is presented. Consideration is restricted to hypersonic flight within the atmosphere. An energy state approximation is used in a four-state model for flight of a point mass in a vertical plane. Trajectory constraints, including those of dynamic pressure and aerodynamic heating, are initially ignored. Singular perturbation methods are applied in solving the optimal control problem of minimum fuel climb. The resulting reduced solution for the energy state dynamics provides an optimal altitude profile dependent on energy level and control for rocket thrust. A boundary-layer analysis produces an approximate lift control solution in feedback form and accounts for altitude and flight path angle dynamics. The reduced solution optimal climb path is presented for the unconstrained case and the case for which a maximum dynamic pressure constraint is enforced.

Calise, A. J.↗
NASA NTRS1989

Computing Optimal Multiarc Trajectories

Optimal Multi-Arc Trajectories (OMAT) computer program designed to calculate solution to optimal-trajectory problem in cases of low thrust-to-weight ratios. Developed for two-body exoatmospheric problem with three degrees of freedom in inverse-square force field. Offers two different options: impulsive changes in velocity and finite burns with low thrust-to-weight ratios. Two distinct solutions available from program: optimal multi-impulse (OMI) solution and optimal multiburn (OMB) solution. Two solutions obtained separately, or results of OMI solution used to guess unknown parameters of OMB solution. Written for DEC VAX-series computer. Written completely in FORTRAN 77.

Jezewski, Donald J.↗