Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Turbulent magnetohydrodynamic density fluctuations

A spectral-method numerical code is used to compute mass-density fluctuation spectra in turbulent magnetofluids. The computations are used to test and extend the analytical theory of density variations in slightly compressible magnetofluids given by Montgomery, et al. (1987) and used to infer inertial-range density-fluctuation spectra for the nearby interstellar medium and solar wind. A local equation of state is assumed, relating density to pressure. Constant, scalar resistivities and viscosities are used. In the limit of low Mach numbers and high mechanical-to-magnetic pressure ratios, the fit of the computations to the analytical theory is seen to be close.

Shebalin, John V.↗

The structure and stability of coronal magnetic fields

The high degree of symmetry often assumed in studies of the structure and stability of coronal magnetic field configurations is restrictive and can yield misleading results. Fully three-dimensional numerical methods for constructing force-free equilibria and for examining their stability properties are developed which make no assumptions about symmetry. A test of the stability analysis has been performed by applying it to the Gold-Hoyle twisted flux tube, which is known to be kink-unstable if the helical field makes more than about one turn between the line-tying end-plates. The preliminary result is that the critical number of turns is about 1.1, in good agreement with the previous best estimate. However, it is found that the growth rate, which has not been discussed previously, is orders of magnitude smaller than expected, even when the flux tube is twisted far beyond the stability limit.

Mcclymont, A. N.↗

An experimental investigation of flowfield about a multielement airfoil

Detailed measurements of mean-flow and turbulence quantities around a multielement airfoil model have been made using pressure and hot-wire probes. The results obtained in two test cases at the chord Reynolds number of 3 million and the freestream Mach number of 0.2 show a number of features of the complex flows that are important in accurate modeling of these flows by numerical methods. Many parts of the shear flow vastly deviate from classical flows, and the interaction with the external potential flow is very strong.

Nakayama, A.↗

A general model for Io's neutral gas clouds. I - Mathematical description

A general mathematical formalism for calculating the physical properties of any of Io's neutral gas clouds (Na, K, O, S, SO2) is presented. The dynamical effects of both the gravitational fields of Io and Jupiter and solar radiation pressure are included, in addition to the many complex space- and time-dependent interactions that occur between the neutral clouds and the plasma torus. The importance of this new model in studying both the plasma conditions prevalent in the inner planetary magnetosphere and the nature of Io's local atmosphere is discussed. A numerical method for evaluating the physical properties of the neutral clouds using the new model is described.

Smyth, W. H.↗

Primitive numerical simulation of circular Couette flow - Carrousel wind tunnel nonturbulent solutions

The azimuthal-invariant, three-dimensional cylindrical, incompressible Navier-Stokes equations are solved to steady state for a finite-length, physically realistic model. The numerical method relies on an alternating-direction implicit scheme that is formally second-order accurate in space and first-order accurate in time. The equations are linearized and uncoupled by evaluating variable coefficients at the previous time iteration. Wall grid clustering is provided by a Roberts transformation in radial and axial directions. A vorticity-velocity formulation is found to be preferable to a vorticity-streamfunction approach. Subject to no-slip, Dirichlet boundary conditions, except for the inner cylinder rotation velocity (impulsive start-up) and zero-flow initial conditions, nonturbulent solutions are obtained for sub- and supercritical Reynolds numbers of 100 to 400 for a finite geometry where R(outer)/R(inner) = 1.5, H/R(inner) = 0.73, and H/Delta-R = 1.5. An axially-stretched model solution is shown to asymptotically approach the one-dimensional analytic Couette solution at the cylinder midheight. Flowfield change from laminar to Taylor-vortex flow is discussed as a function of Reynolds number. Three-dimensional velocities, vorticity, and streamfunction are presented via two-dimensional graphs and three-dimensional surface and contour plots.

Hasiuk, Jan↗

Calculations of three-dimensional flows using the isenthalpic Euler equations with implicit flux-vector splitting

A numerical method for solving the isenthalpic form of the Euler equations is developed. The method is based on the concept of flux vector splitting in its implicit form applied to a cell centered finite volume scheme. Approximate factorization is implemented in solving the implicit part of the governing equations. Time marching to a steady state solution requires short computational times due to the relative efficiency of the basic method. Computational times are further reduced by the implementation of multigrid. Results for several basic cases are shown.

Cannizzaro, Frank E.↗

Minimum-time pointing control of a two-link manipulator

Minimum-time pointing control for the end-effector of a planar, two-link manipulator is developed. Minimum-time pointing control is a new area of research for multilink manipulators, which can be applied to rapid retargeting control of a multibody spacecraft. The minimum-time control problem of aligning the second link of the two-link manipulator with a given target point is considered. A numerical method called the minimizing-boundary-condition method is used to determine optimal solutions for the two-point boundary-value problem associated with first-order necessary conditions. Minimum-time solutions for different models of pointing systems are compared. The results of the comparison show that a two-link manipulator with two degree-of-freedom performs better than a conventional one-link system for minimum-time pointing.

Wie, Bong↗

An algorithm for unsteady flows with strong convection

An implicit ADI numerical method for the calculation of 2-D unsteady flows with strong convection effects is described. The method is based on the conventional Crank-Nicholson approach for parabolic equations but an upwind-downwind differencing is used for the first order spatial derivatives associated with convection. The differencing is carried out in the current and previous time plane in such a way that the algorithm is second order accurate in both space and time. The difference equations are factored into sequential operators, one in each independent spatial variable; the solution at each time step may then be computed as a sequence of tridiagonal matrix problems. The method may be used in a noniterative manner although iteration at each time step is recommended in situations where the effects of convection are strong.

Peridier, Vallorie↗

A bibliography on parallel and vector numerical algorithms

This is a bibliography on numerical methods. It also includes a number of other references on machine architecture, programming language, and other topics of interest to scientific computing. Certain conference proceedings and anthologies which have been published in book form are also listed.

Ortega, James M.↗

Numerical computation of shock wave-turbulent boundary layer interaction in transonic flow over an axisymmetric curved hill

A control-volume based finite difference computation of a turbulent transonic flow over an axisymmetric curved hill is presented. The numerical method is based on the SIMPLE algorithm, and hence the conservation of mass equation is replaced by a pressure correction equation for compressible flows. The turbulence is described by a k-epsilon turbulence model supplemented by a near-wall turbulence model. In the method, the dissipation rate in the region very close to the wall is obtained from an algebraic equation and that for the rest of the flow domain is obtained by solving a partial differential equation for the dissipation rate. The other flow equations are integrated up to the wall. It is shown that the present turbulence model yields the correct location of the compression shock. The other computational results are also in good agreement with experimental data.

Kim, S.-W.↗

Transonic viscous flow calculations for a turbine cascade with a two equation turbulence model

A numerical method for the study of steady, transonic, turbulent viscous flow through plane turbine cascades is presented. The governing equations are written in Favre-averaged form and closed with a first order model. The turbulent quantities are expressed according to a two-equation kappa-epsilon model where low Reynolds number and compressibility effects are included. The solution is obtained by using a pseudo-unsteady method with improved perturbation propagation properties. The equations are discretized in space by using a finite volume formulation. An explicit multistage dissipative Runge-Kutta algorithm is then used to advance the flow equations in the pseudo-time. First results of calculations compare fairly well with experimental data.

Boretti, A. A.↗

Numerical solution of periodic vortical flows about a thin airfoil

A numerical method is developed for computing periodic, three-dimensional, vortical flows around isolated airfoils. The unsteady velocity is split into a vortical component which is a known function of the upstream flow conditions and the Lagrangian coordinates of the mean flow, and an irrotational field whose potential satisfies a nonconstant-coefficient, inhomogeneous, convective wave equation. Solutions for thin airfoils at zero degrees incidence to the mean flow are presented in this paper. Using an elliptic coordinate transformation, the computational domain is transformed into a rectangle. The Sommerfeld radiation condition is applied to the unsteady pressure on the grid line corresponding to the far field boundary. The results are compared with a Possio solver, and it is shown that for maximum accuracy the grid should depend on both the Mach number and reduced frequency. Finally, in order to assess the range of validity of the classical thin airfoil approximation, results for airfoils with zero thickness are compared with results for airfoils with small thickness.

Scott, James R.↗

A numerical study of a class of TVD schemes for compressible mixing layers

At high Mach numbers the two-dimensional time-developing mixing layer develops shock waves, positioned around large-scale vortical structures. A suitable numerical method has to be able to capture the inherent instability of the flow, leading to the roll-up of vortices, and also must be able to capture shock waves when they develop. Standard schemes for low speed turbulent flows, for example spectral methods, rely on resolution of all flow-features and cannot handle shock waves, which become too thin at any realistic Reynolds number. The performance of a class of second-order explicit total variation diminishing (TVD) schemes on a compressible mixing layer problem was studied. The basic idea is to capture the physics of the flow correctly, by resolving down to the smallest turbulent length scales, without resorting to turbulence or sub-grid scale modeling, and at the same time capture shock waves without spurious oscillations. The present study indicates that TVD schemes can capture the shocks accurately when they form, but (without resorting to a finer grid) have poor accuracy in computing the vortex growth. The solution accuracy depends on the choice of limiter. However a larger number of grid points are in general required to resolve the correct vortex growth. The low accuracy in computing time-dependent problems containing shock waves as well as vortical structures is partly due to the inherent shock-capturing property of all TVD schemes. In order to capture shock waves without spurious oscillations these schemes reduce to first-order near extrema and indirectly produce clipping phenomena, leading to inaccuracy in the computation of vortex growth. Accurate simulation of unsteady turbulent fluid flows with shock waves will require further development of efficient, uniformly higher than second-order accurate, shock-capturing methods.

Sandham, N. D.↗

Theoretical studies in support of the 3M-vapor transport (PVTOS-) experiments

Results are reported for a preliminary theoretical study of the coupled mass-, momentum-, and heat-transfer conditions expected within small ampoules used to grow oriented organic solid (OS-) films, by physical vapor transport (PVT) in microgravity environments. It is show that previous studies made restrictive assumptions (e.g., smallness of delta T/T, equality of molecular diffusivities) not valid under PVTOS conditions, whereas the important phenomena of sidewall gas creep, Soret transport of the organic vapor, and large vapor phase supersaturations associated with the large prevailing temperature gradients were not previously considered. Rational estimates are made of the molecular transport properties relevant to copper-phthalocyanine monomeric vapor in a gas mixture containing H2(g) and Xe(g). Efficient numerical methods have been developed and are outlined/illustrated here to making steady axisymmetric gas flow calculations within such ampoules, allowing for realistic realistic delta T/T(sub)w-values, and even corrections to Navier-Stokes-Fourier 'closure' for the governing continuum differential equations. High priority follow-on studies are outlined based on these new results.

Rosner, Daniel E.↗

Unsteady solution of incompressible Navier-Stokes equations

The numerical scheme used by the present time-accurate FEM numerical method for incompressible Navier-Stokes equations, using primitive variables as the unknowns, is a Crank-Nicholson implicit treatment of all equation terms with central differencing for space derivatives. The introduction of a continuous auxilliary system in pseudo-time, with artificial compressibility, yields the incompressible solution at the advanced time level; time-accurate solutions are thereby obtained for two-dimensional fluid flows in a square cavity, in the cases of both an impulsively starting lid and an oscillating lid.

Soh, W. Y.↗

An approach to solving large reliability models

This paper describes a unified approach to the problem of solving large realistic reliability models. The methodology integrates behavioral decomposition, state trunction, and efficient sparse matrix-based numerical methods. The use of fault trees, together with ancillary information regarding dependencies to automatically generate the underlying Markov model state space is proposed. The effectiveness of this approach is illustrated by modeling a state-of-the-art flight control system and a multiprocessor system. Nonexponential distributions for times to failure of components are assumed in the latter example. The modeling tool used for most of this analysis is HARP (the Hybrid Automated Reliability Predictor).

Boyd, Mark A.↗

Viscous effects on the resonance of a slotted wind tunnel using finite elements

Prompted by the fact that wind tunnel flutter and oscillatory airload measurements are affected by acoustic vibration mode coupling when the model frequency lies near a wind tunnel resonance frequency, a numerical method has been developed for design sensitivity analysis. Solid curves represent the resonant frequency for the slot, without considering the slot's viscosity. While the viscosity effect decreases with increasing slot width, the viscosity effect also decreases as the slot width approaches zero.

Lee, IN↗

Numerical modeling of turbulent supersonic reacting coaxial jets

The paper considers the mixing and subsequent combustion within turbulent reacting shear layers. A computer program was developed to solve the axisymmetric Reynolds averaged Navier-Stokes equations. The numerical method integrates the Reynolds averaged Navier-Stokes equations using a finite volume approach while advancing the solution forward in time using a Runge-Kutta scheme. Three separate flowfields are investigated and it is found that no single turbulence model considered could accurately predict the degree of mixing for all three cases.

Eklund, Dean R.↗