Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Morphology and composition of Goldeye (Hiodontidae; Hiodon alosoides) otoliths

In this work, we provide up-todate morphological and compositional data on otoliths of the osteoglossomorph Goldeye (Hiodon alosoides). Using computed tomography (CT) X-ray, we documented the location of each of the three pairs of otoliths (lapilli, sagittae, and asterisci) in relation to the swim bladder, which extended forward in close proximity to the sagittae and asterisci. The lappili were the largest otoliths in terms of surface area and volume, but the sagittae were highly modified, appearing spiral in shape when viewed dorsally, with a surface area to volume ratio more than double that of the lapilli. Using scanning electron microscopy, the surface of each otolith was viewable in great detail, and small otoconia (~10.5 μm diameter) were observed on each, but were most numerous on the sagittae. Additionally, on scanning electron micrographs, the sagittae appeared to be bi-lobed, with asymmetrical lobes each oriented in the same general direction. Using neutron and X-ray diffraction methods, we found three polymorphs of calcium carbonate crystals (aragonite, vaterite, and calcite), sometimes all within the same otolith. However, in general, lapilli and sagittae were composed predominately of aragonite whereas asterisci were composed chiefly of vaterite. With these results, we provide information on a unique species, whose inclusion in future studies would benefit our understanding of fish hearing, fish evolution, and fisheries ecology.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of hydration on morphology of thin phosphonate block copolymer electrolyte membranes studied by electron tomography

The morphological changes of phosphonate polypeptoid electrolyte membranes, poly-N-(2-ethyl)hexylglycine-block-poly-N-phosphonomethylglycine (pNeh m -b-pNpm n ), in hydrated and dry states were characterized by cryogenic transmission electron microscopy (cryo-TEM) and cryogenic electron tomography (cryo-ET). The analysis of 3D tomograms revealed that the pNeh 9 -b-pNpm 9 thin films absorbed a large amount of water, resulting in the formation of membranes that were nearly flat and giant multicompartment vesicles dispersed in the water phase. A simple lamellar phase appeared when the films were dried. In contrast, pNeh 18 -b-pNpm 18 thin films absorbed little water and formed small highly curved unilamellar and multilamellar vesicles. Water was located mainly outside the closely-packed vesicles. When water was removed by drying, the walls of adjacent vesicles collapsed to form honeycomb-like capsules. Here, the changes in domain size reflected changes in chain conformations. The pNpm9 blocks were saturated by water and fully extended, while pNpm 18 blocks were neither saturated by water nor fully extended. In addition, the thicknesses of hydrophobic blocks in the hydrated films of both pNeh 9 -b-pNpm 9 and pNeh 18 -b-pNpm 18 were smaller than those in the dry films, reflecting an increase of the average distance between the neighboring junctions of polypeptoid molecules.

36 MATERIALS SCIENCE↗

Diblock copolymers of polystyrene- b -poly(1,3-cyclohexadiene) exhibiting unique three-phase microdomain morphologies

Here, the synthesis and molecular characterization of a series of conformationally asymmetric polystyrene-block-poly(1,3-cyclohexadiene) (PS- b -PCHD) diblock copolymers (PCHD: ~90% 1,4 and ~10% 1,2), by sequential anionic copolymerization high vacuum techniques, is reported. A wide range of volume fractions (0.27 ≤ Φ PS ≤ 0.91) was studied by transmission electron microscopy and small-angle X-ray scattering in order to explore in detail the microphase separation behavior of these flexible/semiflexible diblock copolymers. Unusual morphologies, consisting of PCHD core(PCHD-1,4)–shell(PCHD-1,2) cylinders in PS matrix and three-phase (PS, PCHD-1,4, PCHD-1,2) four-layer lamellae, were observed suggesting that the chain stiffness of the PCHD block and the strong dependence of the interaction parameter χ on the PCHD microstructures are important factors for the formation of this unusual microphase separation behavior in PS- b -PCHD diblock copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 1564–1572

36 MATERIALS SCIENCE↗

HopBox: An image analysis pipeline to characterize hop cone morphology

Abstract Hop cone morphology can influence picking and drying ability, and color can impact consumer preference and may be indicative of quality. However, these characteristics are not generally evaluated in hop breeding programs due to the tedious nature of trait quantification and the extensive variation among cones within a genotype. We developed the HopBox, which is a simply constructed light box with a camera mount, and a publicly available image processing pipeline that identifies hop cones within color‐corrected images, reads a QR code within the image, and outputs data on hop cone length, width, area, perimeter, openness, weight, color, and density. The trained model was applied to images of 500 cones each from 15 replicated advanced hop genotypes from the USDA‐ARS breeding program in Prosser, Washington. Analysis of variance revealed significant ( p < 0.001) differences between genotypes for all traits measured, enabling breeders to discriminate between genotypes for selection purposes. Broad sense heritability for all traits ranged from 0.23 to 0.59. A random sampling of hop cones from the complete dataset revealed that imaging only 5–10 cones adequately captured genotypic variation and provided acceptable rank correlations ( r s > 0.75); however, increasing the sample size to 30 provided optimal precision. Instructions for constructing a HopBox and the code for the analysis pipeline are publicly available online and have wide applicability for hop breeding and research.

Altendorf, Kayla R.↗

The Wormholes Within: A Study of 1, 3, 5–Triamino–2, 4, 6–Trinitrobenzene Crystal Morphology by Micro and Nano–Scale X–Ray Computed Tomography and its Effects Upon the Shock Sensitivity of Detonation

We report that we understand heterogeneous-explosive detonation only to the extent that we can first measure the salient chemical and microstructural features. Barring an inordinate amount of trial and error, we can tailor the detonation properties of our HE formulations only to the extent that we understand (at least qualitatively) the same effects. As an insensitive high explosive, 1, 3, 5-triamino-2, 4, 6-trinitrobenzene (TATB) burns more heterogeneously than conventional high explosives, making its detonation properties sensitive to microstructure. The Benziger route can produce various grain morphologies depending on the amount of water used in the amination step. So-called dry-aminated (DA) TATB crystals are riddled with a void structure called wormholes, which are washed out ammonium chloride (NH4Cl) inclusions that form during synthesis. So-called wet-aminated (WA) TATB crystals do not contain NH 4 Cl inclusions but possess a very convoluted external structure. Using both micro and nano-scale CT, we explore three DA-TATB lots that reflect evolutionary processing changes, plus one WA-TATB material. Micro CT imaged crystal collections show the exterior grain structure, revealing its roughness and providing a crude particle size measurement. The DA-TATB lots that test most sensitively in the LANL ECOT corner-turning test are roughest, having the appearance of being “corroded”. Nano-scale CT reveals both internal NH 4 Cl inclusions and void structures. The DA-TATB lots that tested intermediate and high sensitivity in ECOT exhibited similar wormhole structures, which were more extensive than that of the low-sensitivity lot. The least sensitive DA-TATB lot also retained more NH 4 Cl, consistent with reduced connectivity of voids to the surface.

1, 3, 5-triamino-2,4↗

19‐1: Invited Paper: Atom Probe Tomography for Understanding OLED Morphology

We have recently demonstrated that atom probe tomography (APT) can be applied to Organic Light Emitting Diode (OLED) materials. APT can measure the mass and position of molecules in a film with sub‐Dalton and sub‐nm resolutions, allowing for morphology measurements of OLED systems. We will discuss the technique and key results in emissive guest‐host systems.

Zimmerman, Jeramy D.↗

Effects of Chronic Metal Exposure on the Morphology of Beetles Species Representing Different Ecological Niches

To test effects of metal contamination on beetles morphology, specimens from species representing herbivores (Strophosoma capitatum), carnivores (Carabus arcensis and C. violaceus) and detritivores (Anoplotrupes stercorosus) were collected from an area polluted with zinc, lead and cadmium and from a control site. Both the length and width of elytra and pronotum were compared. Females of all species from the polluted area were smaller than those from the control site with the average difference of 2.7% (range 0.7%–6%). In contrast, males responded less consistently among species: A. stercorosus showed lower size of elytra and pronotum at the polluted area, while in C. arcensis only the elytra length and pronotum width were smaller. C. violaceus males exhibited smaller elytra length and pronotum length and width at the polluted area. In contrast, no differences between the two sites were found for S. capitatum males. Sex differences may originate from different energy investment strategies in females and males related to the reproduction needs. Even if the observed differences in body size were small, the smaller body size in females of all studied species, irrespectively of the guild, is striking and may indicate on lower fitness of a range of species inhabiting metal polluted areas.

54 ENVIRONMENTAL SCIENCES↗

A combination interferometric and morphological image processing approach to rapid quality assessment of additively manufactured cellular truss core components

Advanced manufacturing (AM) processes such as laser powder bed fusion (LPBF) are increasingly capable of fabricating components with useful and unprecedented mechanical properties by incorporating complex internal bracing structures. From the standpoint of quality control and assessment, however, internally complex assemblies present significant build-verification challenges. Here we propose a hybrid approach to the inspection involving the application of computer-aided speckle interferometry (CASI) and morphological image processing as a rapid, inexpensive, and facile method for AM quality control. The described methodology has low capital equipment costs, is full-field and non-contact, can be used in an industrial setting, and has very low requirements in terms of operator training and expertise. Consisting primarily of the combination of image processing software with a simple optical system of variable sensitivity, the method is shown to be effective for inspection of a titanium honeycomb component subjected to differential pressure. Results are compared to those achieved with computed tomography (CT), immersion ultrasound testing (UT), and optical holographic interferometry. Here we propose several possible processing strategies for automated quality assessment based on this powerful hybrid approach.

36 MATERIALS SCIENCE↗

Quantifying mortality and injury susceptibility for two morphologically disparate fishes exposed to simulated turbine blade strike

Passage of fishes through hydropower turbines and water pumping stations may cause mortal injury as the result of exposure to blade strike impact. Laboratory trials of simulated blade strike on two morphologically distinct fishes, American eel ( Anguilla rostrata ) and bluegill sunfish ( Lepomis macrochirus ) were undertaken to assess injury and mortality rates. We hypothesized that bluegill would have comparable rates of injury and mortality to other laterally compressed fishes while anguilliform American eel would be more resistant to injury. American eel had low observed mortality rates at the highest velocity tested (13.6 m/s), but many fish were observed with vertebral fractures which we categorized as functionally dead individuals. Bluegill were more susceptible to blade strike with high rates of mortality regardless of blade thickness, velocity, or impact conditions (location, angle, or fish orientation). These data have broadened our understanding of the range of responses among entrained fishes exposed to blade strike and represent species with low (American eel) and high (bluegill) susceptibility to injury and mortality. Furthermore, our blade strike data can help inform safer turbine designs or prioritization of pumps that minimize traumatic injury and mortality of fishes during non-volitional passage through hydropower turbines or water pumping stations.

59 BASIC BIOLOGICAL SCIENCES↗

Evolution of the lithium morphology from cycling of thin film solid state batteries

Thin film batteries with a Lipon electrolyte and Li metal anode can be cycled thousands of times. During this time there is a gradual redistribution of the lithium at the top surface; the morphology that develops depends on a number of factors but is largely driven by dewetting. In this work, this redistribution is characterized as functions of the cycle number, duty cycle, cathode composition, and protective coating over the lithium. Observations of wrinkled and pitted surfaces are discussed considering the effects of defects and diffusion in the lithium and influences of film stresses and surface energy. In conclusion, similar processes may impact solid state lithium batteries with higher energy per active area.

25 ENERGY STORAGE↗

Enhanced Exciplex Emission of Pyrene Thin Films Doped by Perylene: Structural, Photophysical and Morphological Investigation

The present work reports on the preparation of thin films of pyrene luminophors doped by varying amounts of perylene by spin coating technique. The structural, morphological, and photophysical properties of pyrene thin films have been investigated as a function of perylene contents. X-ray diffraction studies of doped thin films show well-defined peaks, and estimated crystallite size decreases with increasing perylene content, due to the formation of closed packed crystal structure. SEM images of pure pyrene revealed smooth, and compact and separated crystals with amounts of perylene. The result of absorption spectra showed decrease in intensity with perylene content. However, the fluorescence spectra of pyrene containing higher amounts of perylene showed broad and structureless exciplex emission at 510 nm. The emission colour of pyrene luminophors tuned from blue to green by controlling the concentration of perylene. The phenomenon of change in colour was seen due to efficient excitation energy transfer from pyrene to perylene in thin films. It also found that the intensity of exciplex emission increases with increasing concentration of perylene is of high demand in fluorescent lamp as well as green organic light emitting diodes.

36 MATERIALS SCIENCE↗

Comparative Study of Xylan Extracted by Sodium and Potassium Hydroxides (NaOH and KOH) from Bagasse Pulp: Characterization and Morphological Properties

Xylan is the second most abundant polysaccharide and the predominant hemicellulose component of soda bagasse pulp. The present endeavor focuses on increasing the value addition to underutilized agro-industrial residue such as bagasse. For this purpose, xylan was isolated by two conventional alkali extraction methods i.e. NaOH and KOH. The recovery rate and sugar composition of different reaction times and alkali consumptions were monitored with advanced method such as High Performance Liquid Chromatography (HPLC). The Fourier Transform Infrared Spectroscopy (FTIR) and Wide Angle X-ray spectroscopy (WAXS) were respectively employed to characterize the functional groups and Crystallinity Index (CrI) changes during the extraction process. It was explored that highest xylan recovery rates were obtained with 6% of NaOH at 120 min and 6% KOH at 45 min. The xylan morphology via WAXS was found that its structure to be amorphous. HPLC results also showed KOH had higher effectiveness than NaOH in terms of extracted xylan purity. Highest XGRs (Xylose to Glucose Ratios) were also achieved by KOH processes. Hence, this study contributes to the adequate utilization of agricultural residues, with promising potential for applications in the production of certain novel materials and chemical conversion industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Alkali Treatment on Mechanical and Morphological Properties of Pineapple Leaf Fibre/Polyester Composites

In this study, our aim is to analyze the influence of fibre treatments and different fibre loading on mechanical, physical and chemical properties of pineapple leaf fibre reinforced polyester composites (PALF/PE). Fibre treatments were carried out with 1 N NaOH and KOH for 1 h. The untreated and treated PALF/PE composites were fabricated with 25 wt%, 35 wt% and 45 wt% fibre loadings by compression molding technique. Fourier Transform Infrared Spectroscopy (FTIR) was used to understand the effects of chemical treatment on PALF mechanical test results revealed that 45 wt% of PALF/PE composites treated with NaOH showed a 35% increase in tensile strength compared to untreated PALF/PE composites. The tensile modulus and the flexural module are also the highest at 45 wt% of KOH treated composites. The highest impact strength of 70 J/m was obtained for PALF/PE composites with NaOH treated fibres at 25% fibre loading. The results show that the fibre treatments in terms of the flexural and inter-laminar shear strength of composites were not effective. SEM of the tensile fractured specimen of PALF/PE composites revealed the changes in fibre characteristics due to the alkali treatment and less fibre pull-out at higher fibre loading. Overall we conclude that 1 N NaOH, 45 wt% treated PALF/PE composites satisfactorily and effectively improved both the mechanical and morphological properties. Obtained composites would be promising for construction materials, furniture and automotive components due to their superior strength and modulus at higher fibre loading.

36 MATERIALS SCIENCE↗

Chitosan/Polyaniline Conductive Blends for Developing Packaging: Electrical, Morphological, Structural and Thermal Properties

The present study aim to evaluate the development of electrical conducting blends made from the biodegradable polymer, chitosan (Cs), and polyaniline (PANI) doped with dodecylbenzene sulfonic acid dissolved in acid solution chitosan, to enable development of conductive and smart packages that help to monitor exposure conditions of food aimed to reduce food waste. Concentration of Cs is fixed (2%), and PANI (80, 100 mg mL{sup −1}) and glutaraldehyde (Glut) (0.625 × 10{sup −3} μL) concentrations are alter. Morphological (SEM), structural (FTIR, RAMAN), thermal (TGA) and electrical (Hall effect) properties are evaluate. Blends were predominantly negative carriers, with conductivity in order of 10{sup −1} S cm{sup −1}. Best formulations are those make without of Glut. Analyses show an interaction between components. FTIR show bands characteristic of benzene and quinoid rings of PANI, and RAMAN exhibit a band related to PANI’s protonation. TGA show maintenance of maximum degradation temperature of PANI. This results evidence maintenance of PANI’s conducting structures even after blends synthesis.

36 MATERIALS SCIENCE↗

Effect of Annealing Temperature on Structural, Morphological, Optical and Magnetic Properties of NiFe{sub 2}O{sub 4} Thin Films

Nickel ferrite (NiFe{sub 2}O{sub 4}) thin films have been deposited on glass substrates by a chemical spray pyrolysis technique at 350 {sup ∘}C substrate temperature. The deposited films were annealed at four different temperatures (400, 450, 500 and 550 {sup ∘}C), and the effect of annealing temperature on the structural, morphological, optical and magnetic properties were studied. The annealed films were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), UV-visible spectroscopic analysis and vibrating sample magnetometer (VSM). XRD patterns showed that the NiFe{sub 2}O{sub 4} is oriented along (311) plane, which enhances peak intensity with respect to the annealing temperature. The analysis of XRD pattern revealed the formation of single-phase cubic spinel structure. The FT-IR spectrum of NiFe{sub 2}O{sub 4} thin films showed strong absorption peaks around 616 and 353 cm{sup − 1} which indicates the cubic spinel crystal structure of the films. FE-SEM micrographs show that the grain size increases with an increase in annealing temperature. The grain size varies between ∼ 19 and ∼ 28 nm, confirming the nanocrystalline nature of the prepared thin films. The optical properties of the films were studied by an absorbance spectrum in the range of 300 to 800 nm. The results showed that the energy band gap decreased with the increase of annealing temperature. Magnetic properties of NiFe{sub 2}O{sub 4} thin films exhibit a strong dependence on the annealing temperature. The saturation magnetization increases from ∼ 68.29 to ∼ 205.24 emu/cm{sup 3} with increasing annealing temperature, which is in favour of modern electronic device miniaturization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure, Morphology, Cation Distribution and Magnetic Properties of Cr{sup 3+}-Substituted CoFe{sub 2}O{sub 4} Nanoparticles

The present investigations deal with the effect of trivalent chromium ions (Cr{sup 3+}) on structural and magnetic properties of nanocrystalline cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles. The samples of CoCr{sub x}Fe{sub 2−x}O{sub 4} (where x = 0.0 to 1.0 in step of 0.2) were successfully synthesized by citric acid-assisted sol-gel auto combustion method. Further, the prepared samples were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR) and pulsed field hysteresis loop technique for structural, morphological and magnetic properties analysis, respectively. XRD patterns showed the formation of single-phase cubic spinel structure with broad Bragg’s peak for all the samples. The value of lattice parameter was found to be decreased with chromium substitution x. Cation distribution studies revealed that Co{sup 2+} and Fe{sup 3+} occupied both A and B sites, whereas Cr{sup 3+} ions occupied only B site. SEM analysis of the prepared samples confirmed the nanocrystalline nature of the material. The two absorption bands belonging to spinel structure were observed in IR spectra. Saturation magnetization (M{sub S}), remanence magnetization (M{sub r}) and coercivity (H{sub C}) was found to be decreased with increase in chromium substitution x.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Morphological, Raman, and Mössbauer Studies on (La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) Compounds

(La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) compounds were prepared by the sol-gel method, using the citric acid route. Structural and microstructural characteristics of the samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Mössbauer spectroscopy was also used for magnetic characterization and structural confirmation of X-ray data. Refinement of XRD patterns indicated that the compounds crystallize in an orthorhombic structure, Pnma space group. The SEM measurements showed that the morphology of the samples is characterized by the existence of large agglomerates, while TEM confirmed the fine particle size. Raman spectra revealed that, when increasing temperature, the level of oxygen species adsorbed at the surface of the particles increases progressively. Room temperature Mössbauer spectroscopy data revealed the existence of two octahedral magnetic sites in the structure of the compounds, which is compatible with XRD data, and a small percentage of a paramagnetic phase in the samples, which increases with Bi-content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical, Morphological, Structural, Optical, and Magnetic Properties of Transition Metal Titanium (Ti)-Doped LaFeO{sub 3} Nanoparticles

In the present work, pure and transition metal titanium (Ti)-doped LaFe{sub 1−x}Ti{sub x}O{sub 3}(x = 0.0, 0.2, 0.4, and 0.6) nanoparticles have been successfully synthesized by hydrothermal synthesis technique for various molar ratios of 0.2, 0.4, and 0.6. The prepared samples were grinned and annealed in furnace at 600 {sup ∘}C/4 h. The X-ray diffraction (XRD) analysis confirms the phase orthorhombic formation of LaFeO{sub 3} and Ti-doped LaFeO{sub 3}. The stoichiometric analysis was performed through energy-dispersive X-ray studies (EDX). The micro-structural features of surface morphology were examined by field emission scanning electron microscopy (FESEM). Further, surface nanocrystalline of the titanium (Ti)-doped LaFe{sub 1−x}Ti{sub x}O{sub 3} was also investigated through high-resolution transmission electron microscopic (TEM) analysis. The enhancement of room temperature magnetization value has been observed from the M–H curve which is measured using vibrating sample magnetometer (VSM).The weak ferromagnetic behavior was observed from hysteresis loop. From hysteresis loop, saturation takes place when the applied magnetic field intensity is 15 kO{sub e}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗