Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ionic conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Formation mechanism of anodic titanium oxide in mixed electrolytes

Highlights: • Compact anodic titanium oxide (CATO) and anodic TiO{sub 2} nanotubes (ATNTs) were compared. • A distinct transform from CATO films into the porous ATNTs was observed firstly. • FESEM evidences for oxygen bubble mould effect were provided firstly. • Formation mechanisms for different titanium oxide films are confirmed consistent. - Abstract: The formation mechanism of anodic TiO{sub 2} nanotubes (ATNTs) remains mysterious and complicated. Usually, ATNTs are fabricated in pure NH{sub 4}F electrolytes rather than mixed electrolytes and Ti anodizations are carried out under potentiostatic rather than galvanostatic conditions. In this work, anodizations under the potentiostatic and galvanostatic conditions are conducted. The formation processes of titanium oxide film in different mixed electrolytes are explored in detail. By changing the mass ratios of oxalic acid and ammonium fluoride, different kinds of anodic titanium oxide films are fabricated: the compact anodic titanium oxide (CATO) films, transient-state anodic titanium oxide films and porous films (ATNTs). A distinct transform from CATO films into ATNTs was observed. Cavities within oxide and hemispheric bottoms are found, confirming the presence of oxygen bubble mould. Based on the electronic current and ionic current model, a consistent formation mechanism for three kinds of anodic titanium oxide films in mixed electrolytes is proposed.

36 MATERIALS SCIENCE↗

DEVELOPMENT AND SELECTION OF IONIC LIQUID ELECTROLYTES FOR HYDROXIDE CONDUCTING POLYBENZIMIDAZOLE MEMBRANES IN ALKALINE FUEL CELLS

Alkaline fuel cell (AFC) operation is currently limited to specialty applications such as low temperatures and pure HO due to the corrosive nature of the electrolyte and formation of carbonates. AFCs are the cheapest and potentially most efficient (approaching 70%) fuel cells. The fact that non-Pt catalysts can be used, makes them an ideal low cost alternative for power production. The anode and cathode are separated by and solid electrolyte or alkaline porous media saturated with KOH. However, CO from the atmosphere or fuel feed severely poisons the electrolyte by forming insoluble carbonates. The corrosivity of KOH (electrolyte) limits operating temperatures to no more than 80°C. This chapter examines the development of ionic liquids electrolytes that are less corrosive, have higher operating temperatures, do not chemically bond to CO and enable alternative fuels. Work is detailed on the IL selection and characterization as well as casting methods within the polybenzimidazole based solid membrane. This approach is novel as it targets the root of the problem (the electrolyte) unlike other current work in alkaline fuel cells which focus on making the fuel cell components more durable.

30 DIRECT ENERGY CONVERSION↗

Simulations with machine learning potentials identify the ion conduction mechanism mediating non-Arrhenius behavior in LGPS

Abstract Li 10 Ge(PS 6 ) 2 (LGPS) is a highly concentrated solid electrolyte, in which Coulombic repulsion between neighboring cations is hypothesized as the underlying reason for concerted ion hopping, a mechanism common among superionic conductors such as Li 7 La 3 Zr 2 O 12 (LLZO) and Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP). While first principles simulations using molecular dynamics (MD) provide insight into the Li + transport mechanism, historically, there has been a gap in the temperature ranges studied in simulations and experiments. Here, we used a neural network potential trained on density functional theory (DFT) simulations, to run up to 40-nanosecond long MD simulations at DFT-like accuracy to characterize the ion conduction mechanisms across a range of temperatures that includes previous simulations and experimental studies. We have confirmed a Li + sublattice phase transition in LGPS around 400 K, below which the ab -plane diffusivity D a b ∗ is drastically reduced. Concomitant with the sublattice phase transition near 400 K, there is less cation-cation (cross) correlation, as characterized by Haven ratios closer to 1, and the vibrations in the system are more harmonic at lower temperature. Intuitively, at high temperature, the collection of vibrational modes may be sufficient to drive concerted ion hops. However, near room temperature, the vibrational modes available may be insufficient to overcome electrostatic repulsion, thus resulting in less correlated ion motion and comparatively slower ion conduction. Such phenomena of a sublattice phase transition, below which concerted hopping plays a less significant role, may be extended to other highly concentrated solid electrolytes such as LLZO and LATP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of samaria doping on the resistance of ceria thin films and its implications to the planar oxygen sensing devices

In order to evaluate and analyze the effect of samarium (Sm) doping on the resistance of cerium oxide, we have grown highly oriented samaria doped ceria (SDC) thin films on sapphire, Al2O3 (0001) substrates by using oxygen plasma-assisted molecular beam epitaxy (OPA-MBE). The film growth was monitored using reflection high-energy electron diffraction (RHEED) which shows two-dimensional growth throughout the deposition. Following growth, the thin films were characterized by X-ray photoelectron spectroscopy (XPS), high-resolution X-ray diffraction (HRXRD), and Rutherford backscattering spectrometry (RBS). XPS depth-profile shows Sm atoms are uniformly distributed in ceria lattice throughout the bulk of the film. The valence states of Ce and Sm in doped thin films are found to be Ce4+ and Sm3+, respectively. HRXRD shows the samaria doped ceria films on Al2O3(0001) exhibit (111) preferred orientation. Ion-channeling in RBS measurements confirms high quality of the thin films. The resistance of the samaria doped ceria films, obtained by two probe measurement capability under various oxygen pressure (1mTorr-100Torr) and temperatures (623K to 973K), is significantly lower than that of pure ceria under same conditions. The 6Sm% doped ceria film is the optimum composition for highest conductivity. This is attributed to the increased oxygen vacant sites in fluorite crystal structure of the epitaxial thin films which facilitate faster oxygen diffusion through hopping process.

36 MATERIALS SCIENCE↗

Electro-Osmosis and Water Uptake in Polymer Electrolytes in Equilibrium with Water Vapor at Low Temperatures

Water uptake and electro-osmosis are investigated to improve the understanding and aid the modeling of water transport in proton-exchange membrane fuel cells (PEMFCs) below 0 C. Measurements of water sorption isotherms show a significant reduction in the water capacity of polymer electrolytes below 0 C. This reduced water content is attributed to the lower vapor pressure of ice compared to supercooled liquid water. At -25 C, 1100 equivalent weight Nafion in equilibrium with vapor over ice has 8 moles of water per sulfonic acid group. Measurements of the electro-osmotic drag coefficient for Nafion and both random and multiblock copolymer sulfonated poly(arylene ether sulfone) (BPSH) chemistries are reported for vapor equilibrated samples below 0 C. The electro-osmotic drag coefficient of BPSH chemistries is found to be {approx}0.4, and that of Nafion is {approx}1. No significant temperature effect on the drag coefficient is found. The implication of an electro-osmotic drag coefficient less than unity is discussed in terms of proton conduction mechanisms. Simulations of the ohmically limited current below 0 C show that a reduced water uptake below 0 C results in a significant decrease in PEMFC performance.

25 ENERGY STORAGE↗

The Li{sup +} conducting composite based on LiTi{sub 2}(PO{sub 4}){sub 3} and Li{sub 3}BO{sub 3} glass

Highlights: • Addition of the LBO glass enhance total ion conductivity up to four orders of magnitude. • Transport of Li{sup +} could be attributed to two media: grains and grain boundaries. • Sintering temperature is the most influential factor affecting the σ{sub tot}. • Melting of the LBO above 700 °C supports the sintering process. - Abstract: The LiTi{sub 2}(PO{sub 4}){sub 3} based composites containing amorphous Li{sub 3}BO{sub 3} were formed and investigated by means of X–ray diffractometry, thermogravimetry, scanning electron microscopy, impedance spectroscopy and density methods. The study shows that when a polycrystalline LiTi{sub 2}(PO{sub 4}){sub 3} material is sintered with Li{sub 3}BO{sub 3} glass, the resultant ceramics exhibit very high total ion conductivity. The maximum conductivity of 1.43 × 10{sup −4} S cm{sup −1} at 30 °C was achieved for the LTP–0.3LBO material sintered at 900 °C compared to 5.15 × 10{sup −8} S cm{sup −1} of the ceramic LiTi{sub 2}(PO{sub 4}){sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and dielectric properties of a rare earth double perovskite oxide Ba{sub 2}CeTaO{sub 6}

Highlights: {yields} A single phase Ba{sub 2}CeTaO{sub 6} (BCT) having monoclinic structure is synthesized. {yields} Impedance spectroscopy is applied to investigate the ac electrical properties of BCT. {yields} Complex impedance plane plots show grain contribution for BCT. {yields} The frequency dependent conductivity spectra follow the power law. -- Abstract: A rare earth double perovskite oxide barium cerium tantalate, Ba{sub 2}CeTaO{sub 6} (BCT) is synthesized by solid-state reaction. The X-ray diffraction pattern of the sample at room temperature (25 {sup o}C) shows monoclinic structure, with the lattice parameters, a = 9.78 A, b = 9.02 A and c = 4.27 A and {beta} = 93.8{sup o}. A scanning electron micrograph shows the formation of grains with average size {approx} 2 {mu}m. Impedance spectroscopy is applied to investigate the ac electrical properties of BCT in a temperature range from 303 to 673 K and in a frequency range from 100 Hz to 1 MHz. Complex-impedance-plane plots show grain contribution for BCT. The frequency-dependent electrical data are analyzed in the framework of the conductivity and modulus formalisms. The frequency-dependent conductivity spectra follow a power law. The conductivity at 110 Hz varies from 3.5 x 10{sup -7} S m{sup -1} to 1.2 x 10{sup -2} S m{sup -1} with increasing temperature from 303 to 673 K, respectively. The scaling behaviour of M'' and Z'' suggest that the relaxation describes the same mechanism at various temperatures.

36 MATERIALS SCIENCE↗

Effect of Sm and Mg co-doping on the properties of ceria-based electrolyte materials for IT-SOFCs

Samples of Sm and Mg co-doped ceria electrolytes of Ce{sub 0.8}Sm{sub 0.2-x}Mg{sub x}O{sub 2-{delta}} (x = 0, 0.05, 0.10, 0.15 and 0.20) were sintered from powders obtained by solid-state reaction method. The structures and electrical properties were characterized by X-ray diffraction (XRD) and AC impedance spectroscopy (IS). The thermal expansion curves of samples were measured and the thermal expansion coefficients between 100 and 800 deg. C were calculated. Results showed that co-doping with appropriate ratio of Sm and Mg can improve the electrical performance of ceria-based electrolytes. As the substitution amount of Mg for Sm increased up to 50 mol%, the conductivity of the samples maintained almost unchanged or even slightly higher than that doped only with Sm in intermediate temperature. The results suggest that the materials cost for producing the ceria-based intermediate temperature solid oxide fuel cells (IT-SOFCs) may be significantly reduced owing to the cost difference between Mg and Sm.

36 MATERIALS SCIENCE↗

Charge carrier dynamics in nanocrystalline Dy substituted ceria based oxygen ion conductors

Nano-crystalline Ce{sub 1-x}Dy{sub x}O{sub 2-δ} (x = 0.1-0.5) materials were prepared using the low temperature citrate auto-ignition method. The Rietveld analysis of the XRD data confirmed the single phase cubic fluorite structure. The particle sizes of the sintered samples are in nano range and lattice parameter increases with Dy concentration. Polydispersed and agglomerated particles are observed by SEM. The EDAX spectra show good stoichiometry of the different atoms in the samples. The conductivity is found to have both grain and grain boundary contribution and shows highest value at x= 0.2. The frequency dependence of dielectric permittivity has been analyzed using Havrilliak-Negami formalism. The variation in different electrical properties has been explained by formation defect associates and their interaction with charge carriers.

36 MATERIALS SCIENCE↗

Reducibility study of oxide-ion conductors La{sub 2-x}Ba{sub x}Mo{sub 2-y}A{sub y}O{sub 9-{delta}} (A = W, Al, Ga) assessed by impedance spectroscopy

The reducibility of oxide-ion conductors La{sub 2-x}Ba{sub x}Mo{sub 2-y}W{sub y}O{sub 9-{delta}} (x = 0, 0.06; y = 0, 0.1, 0.5, 1.0) and La{sub 2}Mo{sub 1.9}A{sub 0.1}O{sub 9-{delta}} (A = Al, Ga) were studied in the reducing atmosphere of 5%H{sub 2} + Ar by means of impedance spectroscopy measurement. The introduction of Ba at La site in La{sub 2}Mo{sub 2-y}W{sub y}O{sub 9} can lower the sintering temperature by about 100 K in comparison with the La{sub 2}Mo{sub 2-y}W{sub y}O{sub 9} samples. All substitutions can enhance the conductivity and improve the reducibility in the temperature range from 548 to 923 K. The double substitution of Ba and W as well as substitution of Al or Ga at Mo sites has a better stabilizing effect than the single tungsten substitution. Among these substitutions the introduction of Al has the best stabilizing effect.

36 MATERIALS SCIENCE↗

Durable, Impermeable Brazes for Solid Oxide Fuel Cells (Final Report)

To develop a new braze to replace the current state-of-the-art Ag-CuO reactive air braze (RAB), two approaches were proposed: 1) development of a new, self-passivating, silver-free braze and 2) development of a CuO-free, silver-based braze. For the first approach, an integrated computational-experimental method was used. Thermo-Calc® was utilized to quickly screen through hundreds of alloy systems to identify candidate braze compositions with the appropriate melting ranges. Material compositions, melting ranges, mechanical properties, oxidation resistance, and wetting characteristics of the candidate alloys were then analyzed experimentally. Substrate surface pre-treatments, active element additions, and novel brazing schemes were also investigated. Unfortunately, the current study failed to identify new silver-free braze compositions suitable for SOFC applications. To help measure the passivation characteristics of surface passivating braze oxide coatings, work was conducted to demonstrate, for the first time, that a variety of disparate and technologically-relevant thermal, mechanical, and electrochemical oxygen-exchange thin film material properties could all be obtained from in situ , current-collector-free wafer curvature measurements. Specifically, temperature or oxygen partial pressure induced changes in the curvature of 230 nm thick (100)-oriented Pr 0.1 Ce 0.9 O 1.95_x (10PCO) films atop 200 mm thick single crystal yttria stabilized zirconia or magnesium oxide substrates were used to measure the biaxial modulus, Young’s modulus, thermal expansion coefficient, thermochemical expansion coefficient, oxygen nonstoichiometry, chemical oxygen surface exchange coefficient, oxygen surface exchange resistance, thermal stress, chemical stress, thermal strain, and chemical strain of the model mixed ionic electronic conducting material 10PCO. The (100)-oriented thin film 10PCO thermal expansion coefficient, thermo-chemical expansion coefficient, oxygen nonstoichiometry, and Young’s modulus (which is essentially constant, at ~200 MPa, over the entire 280–700 °C temperature range in air) measured here were similar to those from other bulk and thin film 10PCO studies. In addition, the measured PCO10 oxygen surface coefficients were in agreement with those reported by other in situ , current collector- free techniques. However, the measured PCO10 oxygen surface exchange coefficients were significantly lower than those obtained from literature studies with large amounts of intentional or inadvertent precious metal surface coverage/contamination (suggesting that uncontaminated (100)-oriented 10PCO may not be a desirable SOFC cathode material). Taken together, this highlighted the advantages of using a sample’s mechanical response, instead of the more traditional electrical response, to probe the electrochemical properties of the ion-exchange materials used in solid oxide fuel cell, solid oxide electrolysis cell, gas-sensing, battery, emission control, water splitting, water purification, and other electrochemically-active devices. For the second approach, a novel silver-nickel brazing method was developed. It was demonstrated that transient porous nickel interlayers, instead of reactive element additions, could be used to promote Ag wetting on yttria stabilized zirconia (YSZ) and produce high-quality YSZ stainless steel (SS) braze joints. Mechanical tests on these reactive-element-free, silver-based SOFC braze joints, both before and after 500 hours of 750°C oxidation in air, showed that the braze and braze interface strength were higher than the underlying YSZ|NiO-YSZ substrate. The microstructural and compositional evolution of SS|Ag-Ni|YSZ braze joints exposed to dual atmosphere (air on one side and 4%H 2 -96%N 2 on the other side) for 300 hours of isothermal 750 °C aging and 300 25°C/min 35-830 °C rapid thermal cycles were compared to a Ag-3CuO braze joint. In contrast to conventional Ag-CuO RAB brazes, the Ag-Ni brazes remained pore free and well bonded, suggesting that Ag-Ni brazes may be more suitable for long term SOFC operation than Ag-CuO brazes. Other applications inspired by the silver-nickel wetting process on various ceramic substrates were also explored. In support of efforts to identify new CuO-free Ag-based brazes, density functional theory and ab initio molecular dynamics calculations were performed to 1) understand silver wetting on YSZ, and 2) identify new oxides to promote silver wetting on YSZ. These simulations found that while the formation of dissolved oxygen clusters within molten silver at the YSZ interface promoted wetting, much greater wetting angle reductions came from the formation of metal oxide interlayers at the Ag-YSZ interface. Through the development of a simple descriptor, many simple metal oxides (single cation) were examined. Unfortunately, their ability to promote Ag wetting were less than that of CuO. However, expanding the search to multi-cation oxides led to several promising candidates, such as CuAlO 2 , CuGaO 2 , and Cu 3 TiO 4 ; all of which are also stable in the reducing SOFC conditions. Depending upon their solubility in molten Ag, these newly-identified oxides could either be pre-applied as wetting promoting interlayers or directly incorporated into Ag to form new reactive air brazes.

36 MATERIALS SCIENCE↗

Acceptor doping of Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Dy, Ho, Yb) pyrochlores with divalent cations (Mg, Ca, Sr, Zn)

New LANTIOX high-temperature conductors with the pyrochlore structure, (Ln{sub 1-x}A{sub x}){sub 2}Ti{sub 2}O{sub 7-{delta}} (Ln = Dy, Ho, Yb; A = Ca, Mg, Zn; x = 0, 0.01, 0.02, 0.04, 0.07, 0.1), have been prepared at 1400-1600 deg. C using mechanical activation, co-precipitation and solid-state reactions. Acceptor doping in the lanthanide sublattice of Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Dy, Ho, Yb) with Ca{sup 2+}, Mg{sup 2+} and Zn{sup 2+} increases the conductivity of the titanates except in the (Ho{sub 1-x}Ca{sub x}){sub 2}Ti{sub 2}O{sub 7-{delta}} system, where the conductivity decreases slightly at low doping levels, x = 0.01-0.02. The highest conductivity in the (Ln{sub 1-x}A{sub x}){sub 2}Ti{sub 2}O{sub 7-{delta}} (Ln = Dy, Ho, Yb; A = Ca, Mg, Zn) systems is offered by the (Ln{sub 0.9}A{sub 0.1}){sub 2}Ti{sub 2}O{sub 7-{delta}} and attains maximum value for (Yb{sub 0.9}Ca{sub 0.1}){sub 2}Ti{sub 2}O{sub 6.9} and (Yb{sub 0.9}Mg{sub 0.1}){sub 2}Ti{sub 2}O{sub 6.9} solid solutions:{approx}2 x 10{sup -2} and 9 x 10{sup -3} S cm{sup -1} at 750 deg. C, respectively. Ca and Mg are best dopants for Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Dy, Ho, Yb) pyrochlores. Using impedance spectroscopy data, we have determined the activation energies for bulk and grain-boundary conduction in most of the (Ln{sub 1-x}A{sub x}){sub 2}Ti{sub 2}O{sub 7-{delta}} (Ln = Dy, Ho; A = Ca, Mg, Zn) materials. The values obtained, 0.7-1.05 and 1-1.4 eV, respectively, are typical of oxygen ion conductors. We have also evaluated defect formation energies in the systems studied.

36 MATERIALS SCIENCE↗

Role of WO{sub 3} on DC conductivity and some optical properties of TeO{sub 2} based glasses

Graphical abstract: Display Omitted Highlights: ► TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system was prepared using melt quenching method. ► DC conductivity, FESEM, EDS and optical absorption studies were carried out. ► Non bridging oxygens (NBOs) are increases with increase of WO{sub 3} content. ► Increase in NBOs is responsible for the increase in the refractive index of glasses. ► Two charge transport mechanisms are coexist in these glasses. -- Abstract: DC electrical conductivity and optical absorption studies have been employed to understand the influence of WO{sub 3} content on the electrical and optical properties of the TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system. Field emission scanning electron microscope (FESEM), Energy dispersive X-ray spectrometry (EDS) measurements have been used to confirm the glassy nature and the elemental analysis of the glass composition, respectively. DC electrical conductivity of the glasses was studied in the temperature range 423–613 K. From Arrhenius plot, the activation energies (E{sub act}) of all the glasses have been calculated and conduction mechanism has been discussed in terms of structural changes occurred with the addition of WO{sub 3} content. The optical properties such as optical band gap (E{sub opt}), Urbach energy (ΔE), molar refraction (R{sub M}), metallization criterion (M), electronic polarizability of the oxide ion (α{sub O{sup 2}{sup −}}) and refractive index (n) have been determined from optical absorption data and were found to be composition dependent.

36 MATERIALS SCIENCE↗

Decoupling ion conductivity and fluid permeation through optimizing hydrophilic channel morphology

Approaches to improve membrane ion conductivity usually leads to higher degree of swelling, more serious fuel cross-over and often sacrificed membrane mechanical strength. Preserving all three main membrane properties is a tough challenge in searching high ion conducting fuel cell membrane. The long standing dilemma is resolved by decoupling ion conduction and fluid permeation property by creating optimized channel morphology using external electric field poling. Success of this approach is demonstrated in the proton conducting membrane composed of poly(ether sulfones) (PES) and sulfonated poly(ether ether ketone) (sPEEK, degree of sulfonation=50%) composites prepared under electric field poling condition. The external field enhanced the aromatic chain ordering from both sPEEK and PES and improved the miscibility. This induced interaction is conducive to the formation of more densely packed amorphous domains that eventually leads to preferentially ordered hydrophilic proton conducting channels having a average dimension (3 nm) smaller than that in generic sPEEK or Nafion. The narrower but more ordered channel displayed much lower methanol permeability (3.17×10{sup −7} cm{sup 2}/s), and lower swelling ratio (31.20%), while the conductivity (~10{sup −1} S/cm) is higher than that of Nafion, or sPEEK at higher (64%) degree of sulfonation. The composite is chemically stable and highly durable with improved membrane mechanical strength. Nearly 50% increase of DMFC power output is observed using this membrane, and the best power density is recorded at 155 mA/cm{sup 2} (80 °C, 1M Methanol).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of atomic scale compositional and displacive modulations in incommensurate melilite electrolytes

The paradigm that functional materials are adequately described as three-dimensional crystal structures is not universally tenable. Gallate melilites are efficient oxide ion conductors at intermediate temperatures (∼750 °C) with non-rational crystallographic modulations presumed to play a key role in significantly enhancing oxygen mobility. Lattice distortions associated with incommensuration are usually extrapolated from diffraction analysis of volumes greatly exceeding the scale of modulation. Therefore, opportunities for making direct nanometric measurements are exceptionally valuable for correlating structure with function. In [CaLn]{sub 2}[Ga]{sub 2}[Ga{sub 2}O{sub 7}]{sub 2} (Ln=Nd, La) melilites, atomic displacive and compositional modulation waves can be imaged by high angle annular dark field and bright field scanning transmission electron microscopy with contrast quantified through electron scattering simulation. Here, we present atomic scale observations of (3+2)-dimensional modulations in gallate melilites which expands our understanding of the ion conduction mechanism and provides guidance for enhancing the performance of solid oxide fuel cells through crystal chemical tailoring. - Highlights: • Characterise the (3+2)-dimensional melilite electrolytes using STEM technique. • Direct observation on displacive and compositional modulation in melilites. • Structural flexibility reduces when increasing interstitial oxygen. • Domain-like incommensurate modulation model is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dielectric relaxation related to single-ionized oxygen vacancies in (Pb{sub 1-x}La{sub x})(Zr{sub 0.90}Ti{sub 0.10}){sub 1-x/4}O{sub 3} ceramics

The dielectric relaxation phenomenon has been studied in lanthanum modified lead zirconate titanate ceramics in the high temperature paraelectric phase. The high temperature dielectric response revealed an anomalous behavior, which is characterized by an increase of the real component of the dielectric permittivity with the increase of the temperature. At the same time, a similar behavior, with very high values, has been observed in the imaginary component of the dielectric permittivity, which can be associated with conduction effects related to the conductivity losses. The frequency and temperature behavior of the complex dielectric permittivity has been analyzed considering the semi-empirical complex Cole-Cole equation. The activation energy value, obtained from the Arrhenius' dependence for the relaxation time, was found to decreases with the increase of the lanthanum concentration and has been associated with single-ionized oxygen vacancies. The short-range hopping of oxygen vacancies is discussed as the main cause of the dielectric relaxation.

36 MATERIALS SCIENCE↗

Instrument for spatially resolved, temperature-dependent electrochemical impedance spectroscopy of thin films under locally controlled atmosphere

We demonstrate an instrument for spatially resolved measurements (mapping) of electrochemical impedance under various temperatures and gas environments. Automated measurements are controlled by a custom LabVIEW program, which manages probe motion, sample motion, temperature ramps, and potentiostat functions. Sample and probe positioning is provided by stepper motors. Dry or hydrated atmospheres (air or nitrogen) are available. The configurable heater reaches temperatures up to 500 °C, although the temperature at the sample surface is moderated by the gas flow rate. The local gas environment is controlled by directing flow toward the sample via a glass enclosure that surrounds the gold wire probe. Software and hardware selection and design are discussed. Reproducibility and accuracy are quantified on a Ba(Zr,Y)O 3-δ proton-conducting electrolyte thin film synthesized by pulsed laser deposition. The mapping feature of the instrument is demonstrated on a compositionally graded array of electrocatalytically active Ba(Co,Fe,Zr,Y)O 3-δ thin film microelectrodes. The resulting data indicate that this method proficiently maps property trends in these materials, thus demonstrating the reliability and usefulness of this method for investigating electrochemically active thin films.

47 OTHER INSTRUMENTATION↗

Intrinsic Ion Transport Properties of Block Copolymer Electrolytes

Knowledge of intrinsic properties is of central importance for materials design and assessing suitability for specific applications. Self-assembling block copolymer electrolytes (BCEs) are of great interest for applications in solid-state energy storage devices. A fundamental understanding of ion transport properties, however, is hindered by the difficulty in deconvoluting extrinsic factors, such as defects, from intrinsic factors, such as the presence of interfaces between the domains. Here, we quantify the intrinsic ion transport properties of a model BCE system consisting of poly(styrene-block-ethylene oxide) (SEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt using a generalizable strategy of depositing thin films on interdigitated electrodes and self-assembling fully connected parallel lamellar structures throughout the films. Comparison between conductivity in homopolymer poly(ethylene oxide) (PEO)-LiTFSI electrolytes and the analogous conducting material in SEO over a range of salt concentrations (r, molar ratio of lithium ion to ethylene oxide repeat units) and temperatures reveals that between 20% and 50% of the PEO in SEO is inactive. Using mean-field theory calculations of the domain structure and monomer concentration profiles at domain interfaces-both of which vary substantially with salt concentration-the fraction of inactive PEO in the SEO, as derived from conductivity measurements, can be quantitatively reconciled with the fraction of PEO that is mixed with greater than a few volume percent of polystyrene. Despite the detrimental interfacial effects for ion transport in BCEs, the intrinsic conductivity of the SEO studied here (ca. 10 -3 S/cm at 90 degrees C, r = 0.085) is an order of magnitude higher than reported values from bulk samples of similar molecular weight SEO (ca. 10 -4 S/cm at 90 degrees C, r = 0.085). Finally, this work provides motivation and methods for pursuing improved BCE chemical design, interfacial engineering, and processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗