Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fire modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Four Years of Airborne Measurements of Wildfire Emissions in California, with a Focus on the Evolution of Emissions During the Soberanes Megafire

Biomass burning is an important source of trace gases and particles which can influence air quality on local, regional, and global scales. With wildfire events increasing due to changes in land use, increasing population, and climate change, characterizing wildfire emissions and their evolution is vital. In this work we report in situ airborne measurements of carbon dioxide (CO2), methane (CH4), water vapor (H2O), ozone (O3), and formaldehyde (HCHO) from nine wildfire events in California between 2013 and 2016, which were sampled as part of the Alpha Jet Atmospheric eXperiment (AJAX) based at NASA Ames Research Center. One of those fires, the Soberanes Megafire, began on 22 July 2016 and burned for three months. During that time, five flights were executed to sample emissions near and downwind of the Soberanes wildfire. In situ data are used to determine enhancement ratios (ERs), or excess mixing ratio relative to CO2, as well as assess O3 production from the fire. Changes in the emissions as a function of fire evolution are explored. Air quality impacts downwind of the fire are addressed using ground-based monitoring site data, satellite smoke products, and the Community Multiscale Air Quality (CMAQ) photochemical grid model.

Iraci, Laura T.↗

Resilient buildings for fire-adapted landscapes: EE and flexible loads integrated with solar and storage microgrids

Energy efficiency (EE) and flexible loads can be part of a resilient buildings packagewhen they are combined with solar and storage in a clean energy microgrid to reduce the carbonfootprint of buildings and enable resilience to extreme events. Recent large wildfires and an emerging understanding of the fire-adapted landscapes in the American West underscore the urgency of work towards scaling and commercializing these systems. For example, a recent power shutoff in Northern California (October 9-12, 2019) resulted in 738k customers disconnected at the peak of the outage and is emblematic of challenges to come. Our paper reports on insights from a clean energy microgrid deployment pilot that integrates a 50 kWAC PV array, a 109 kW / 174 kWh battery system, switchgear to safely isolate from the regional power system, and communicating controllers for HVAC and refrigeration. The project will be commissioned in May 2020 and is sited at a critical infrastructure site in rural Northern California – in this case a gasoline station with convenience store. Our experience and results shed light on capabilities of integrated microgrids to provide value to customers during blue sky conditions and resilience during black sky days with high fire risk, and what opportunities and barriers exist for scaling these integrated microgrid systems in the near term. We use a simulation model to estimate how EE and flexibility can extend the run time of solar and storage, improving the reliability of power at critical sites.

Alstone, Peter↗

Some Applications of SiFSAP for Wildfires, Weather and Atmospheric Dynamics Studies

The Single Field of View (SFOV) Sounder Atmospheric Product (SiFSAP) derived from Cross-track Infrared Sounder (CrIS) on SNPP and JPSS have a spatial resolution ( ~14.5 km) better than most global weather and climate models. Most recent improvement in the quality of these products enables us to use these high-resolution observation-based sounding data for air quality, weather and atmospheric dynamics studies. A few cases studies through a synergistic use of SiFSAP from S-NPP and J-1 and the reanalysis data from ERA5 and MERRA-2 will be presented, which include a process-oriented analysis of (1) a stratospheric intrusion (SI) event occurred on June 11-13, 2017 in the southwestern US, (2) one extreme cold air break (CAO) episode occurred on 27-31 January 2019 across much of the US Midwest and its impact from stratospheric downward transport, and (3) dynamic transport of carbon monoxide (CO) associated with Australia’s unprecedented fire from the end of 2019 to early 2020. These examples will demonstrate the value of SiFSAP for weather, atmospheric dynamics, air quality, wildfires studies and for model evaluations.

Xiaozhen (Shawn) Xiong↗

Four equation k-omega based turbulence model with algebraic flux for supercritical flows

Hydrocarbon and nuclear fuels will contribute substantially to the growing global energy portfolio for some time to come. At the same time atmospheric carbon levels and economic concerns are increasingly shaping the power generation environment. Supercritical fluid technologies are being investigated to address both concerns. For example, direct fired supercritical CO 2 power cycles offer key advantages for carbon capture and thermal efficiency. Additionally, the supercritical water reactor Generation IV nuclear reactor allows higher power densities and more efficient operation than current pressurized or boiling water reactors. As these technologies are developed, a need exists for accurate, yet cost-effective modeling and simulation solutions to assist with design and safety calculations. Supercritical fluid properties are strongly dependent on temperature which results in a number of unique flow features. Among these features are the complex buoyancy and buoyancy-turbulence interaction behaviors exhibited by supercritical flows that are not found in liquid or gas flows. Therefore, standard turbulence models with current model coefficient values are not likely to be applicable to supercritical fluid flows. The subject of this paper is efficient modeling and simulation of supercritical flows to support nascent technologies growing to maturation and operational deployment. We present a framework for developing Reynolds-Averaged Navier-Stokes turbulence models specifically equipped for the challenges of supercritical flows. A novel formulation of the algebraic heat flux model of the buoyancy production of turbulence term is used with a traditional shear stress transport model. To produce a new turbulence model for supercritical channel flows, the empirical coefficients of the resulting four equation model were calculated from data previously published by other authors regarding upward supercritical flow through heated pipes. The presented SST k t - ω t approach was validated against heated tube experiments to show predictive capabilities in moderate flow conditions, where buoyancy effects are important but not dominating of inertial effects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Feasibility of High-Power Diode Laser Array Surrogate to Support Development of Predictive Laser Lethality Model

Predictive modeling and simulation of high power laser-target interactions is sufficiently undeveloped that full-scale, field testing is required to assess lethality of military directed-energy (DE) systems. The cost and complexity of such testing programs severely limit the ability to vary and optimize parameters of the interaction. Thus development of advanced simulation tools, validated by experiments under well-controlled and diagnosed laboratory conditions that are able to provide detailed physics insight into the laser-target interaction and reduce requirements for full-scale testing will accelerate development of DE weapon systems. The ultimate goal is a comprehensive end-to-end simulation capability, from targeting and firing the laser system through laser-target interaction and dispersal of target debris; a 'Stockpile Science' - like capability for DE weapon systems. To support development of advanced modeling and simulation tools requires laboratory experiments to generate laser-target interaction data. Until now, to make relevant measurements required construction and operation of very high power and complex lasers, which are themselves costly and often unique devices, operating in dedicated facilities that don't permit experiments on targets containing energetic materials. High power diode laser arrays, pioneered by LLNL, provide a way to circumvent this limitation, as such arrays capable of delivering irradiances characteristic of De weapon requires are self-contained, compact, light weight and thus easily transportable to facilities, such as the High Explosives Applications Facility (HEAF) at Lawrence Livermore National Laboratory (LLNL) where testing with energetic materials can be performed. The purpose of this study was to establish the feasibility of using such arrays to support future development of advanced laser lethality and vulnerability simulation codes through providing data for materials characterization and laser-material interaction models and to validate the accuracy of code predictions. This project was a Feasibility Study under the LLNL Laboratory Directed Research and Development (LDRD) Program.

42 ENGINEERING↗

Airflow Model Testing to Determine the Distribution of Hot Gas Flow and O/F Ratio Across the Space Shuttle Main Engine Main Injector Assembly

Engine 0209, the certification engine for the new Phase 2+ Hot Gas Manifold (HGM), showed severe deterioration of the Main Combustion Chamber (MCC) liner during hot fire tests. One theory on the cause of the damage held that uneven local distribution of the fuel rich hot gas flow through the main injector assembly was producing regions of high oxidizer/fuel (O/F) ratio near the wall of the MCC liner. Airflow testing was proposed to measure the local hot gas flow rates through individual injector elements. The airflow tests were conducted using full scale, geometrically correct models of both the current Phase 2 and the new Phase 2+ HGMs. Different main injector flow shield configurations were tested for each HGM to ascertain their effect on the pressure levels and distribution of hot gas flow. Instrumentation located on the primary faceplate of the main injector measured hot gas flow through selected injector elements. These data were combined with information from the current space shuttle main engine (SSME) power balances to produce maps of pressure, hot gas flow rate, and O/F ratio near the main injector primary plate. The O/F distributions were compared for the different injector and HGM configurations.

Mahorter, L.↗

Effects of the MacArthur Maze Fire and Roadway Collapse on a Spent Nuclear Fuel Transportation Package

In 2007, a severe transportation accident occurred near Oakland, California, on a section of Interstate 880 known as the "MacArthur Maze," involving a tractor trailer carrying gasoline which impacted an overpass support column and burst into flames. The subsequent fire caused the collapse of portions of the Interstate 580 overpass onto the remains of the tractor-trailer in less than 20 minutes, due to a reduction of strength in the structural steel exposed to the fire. The US Nuclear Regulatory Commission is in the process of examining the impacts of this accident on the performance of a spent nuclear fuel transportation package, using detailed analysis models, in order to determine the potential regulatory implications related to the safe transport of spent nuclear fuel in the United States. This paper will provide a summary of this ongoing effort and present some preliminary results and conclusions.

extra-regulatory fire↗

Ballistic Impact Response of Kevlar 49 and Zylon under Conditions Representing Jet Engine Fan Containment

A ballistic impact test program was conducted to provide validation data for the development of numerical models of blade out events in fabric containment systems. The impact response of two different fiber materials - Kevlar 49 (E.I. DuPont Nemours and Company) and Zylon AS (Toyobo Co., Ltd.) was studied by firing metal projectiles into dry woven fabric specimens using a gas gun. The shape, mass, orientation and velocity of the projectile were varied and recorded. In most cases the tests were designed such that the projectile would perforate the specimen, allowing measurement of the energy absorbed by the fabric. The results for both Zylon and Kevlar presented here represent a useful set of data for the purposes of establishing and validating numerical models for predicting the response of fabrics under conditions simulating those of a jet engine blade release situation. In addition some useful empirical observations were made regarding the effects of projectile orientation and the relative performance of the different materials.

Pereira, J. Michael↗

Group size mediates effects of intraspecific competition and forest structure on productivity in a recovering social woodpecker population

Conservation of endangered social wildlife in disturbance-prone forests is challenging because direct and indirect effects of management strategies developed at the time of species’ listing when population density is low may change under high-density conditions in locally recovered populations. Here, we used piecewise structural equation modeling to evaluate direct and indirect drivers of productivity in the federally endangered cooperatively breeding red-cockaded woodpecker Dryobates borealis (RCW) on Savannah River Site, South Carolina, USA. We estimated direct and indirect relationships among group size, neighboring group sizes, fledgling production, density of cavity tree clusters occupied by RCWs, area satisfying threshold criteria of ≥22 stems ha –1 of pines ≥35.6 cm diameter at breast height (dbh), <1.4 m 2 ha –1 basal area (BA) of hardwoods 7.6–22.9 cm dbh, and <6% hardwood canopy cover, and area treated with prescribed fire, and tested whether group size mediated indirect effects of area satisfying threshold criteria on fledgling production. Increases in area with ≥22 stems ha –1 of pines ≥35.6 cm dbh and <1.4 m 2 ha –1 BA of hardwoods 7.6–22.9 cm dbh, and area treated with prescribed fire, but not area with <6% hardwood canopy cover, had direct positive effects on group size. Group size and area treated with prescribed fire, but not area satisfying threshold criteria, had direct positive effects on fledgling production. The direct effect of neighboring group sizes on fledgling production was negative and smaller relative to the direct positive effect of group size on fledgling production. Overall, our results indicate positive direct effects of group size on fledgling production outweighed negative direct effects of neighboring group sizes, and that group size mediated positive indirect effects of area satisfying structural threshold criteria on fledgling production. These findings indicate that ongoing forest management aimed to increase area with ≥22 pines ha –1 ≥35.6 cm dbh and <1.4 m 2 ha –1 BA of hardwoods 7.6–22.9 cm dbh will promote large group sizes, which in turn improve fledgling production and offset costs of heightened competition with neighboring groups under high-density conditions. Additionally, positive effects of area treated with prescribed fire on RCW group size and fledgling production indicate prescribed fire has unique contributions to woodpecker productivity, likely via direct effects on forest structure and potentially indirect effects on arthropod prey available to foraging RCWs. Furthermore, by simultaneously accounting for multiple drivers of productivity in social wildlife, our study contributes to the understanding of how increases in social wildlife population sizes can alter previously documented habitat-fitness relationships.

prescribed fire↗

Pre-Launch GOES-R Risk Reduction Activities for the Geostationary Lightning Mapper

The GOES-R Geostationary Lightning Mapper (GLM) is a new instrument planned for GOES-R that will greatly improve storm hazard nowcasting and increase warning lead time day and night. Daytime detection of lightning is a particularly significant technological advance given the fact that the solar illuminated cloud-top signal can exceed the intensity of the lightning signal by a factor of one hundred. Our approach is detailed across three broad themes which include: Data Processing Algorithm Readiness, Forecast Applications, and Radiance Data Mining. These themes address how the data will be processed and distributed, and the algorithms and models for developing, producing, and using the data products. These pre-launch risk reduction activities will accelerate the operational and research use of the GLM data once GOES-R begins on-orbit operations. The GLM will provide unprecedented capabilities for tracking thunderstorms and earlier warning of impending severe and hazardous weather threats. By providing direct information on lightning initiation, propagation, extent, and rate, the GLM will also capture the updraft dynamics and life cycle of convective storms, as well as internal ice precipitation processes. The GLM provides information directly from the heart of the thunderstorm as opposed to cloud-top only. Nowcasting applications enabled by the GLM data will expedite the warning and response time of emergency management systems, improve the dispatch of electric power utility repair crews, and improve airline routing around thunderstorms thereby improving safety and efficiency, saving fuel and reducing delays. The use of GLM data will assist the Bureau of Land Management (BLM) and the Forest Service in quickly detecting lightning ground strikes that have a high probability of causing fires. Finally, GLM data will help assess the role of thunderstorms and deep convection in global climate, and will improve regional air quality and global chemistry/climate modeling. The GLM has a robust design that benefits and improves upon its strong heritage of NASA-developed LEO predecessors, the Optical Transient Detector (OTD) and the Lightning Imaging Sensor (LIS). GLM will have a substantially larger number of pixels within the focal plane, two lens systems, and multiple Real-Time Event Processors REPS for on-board event detection and data compression to provide continuous observations of the Americas and adjacent oceans.

Goodman, S. J.↗

Emissions mitigation technology for advanced water-lean solvent-based CO 2 capture processes

This technical final report submitted to DOE/NETL presents all the research activities performed during the entirety of DE-FE0031660 project-Emissions Mitigation Technology for Advanced Water-Lean Solvent-Based CO 2 Capture Processes which spans from October 2018 through March 2022. RTI International has been conducting studies from fundamental and operational aspects to reduce the overall amine emissions from the advanced Water-Lean Solvent (WLS) systems, specifically RTI’s Non-Aqueous Solvent (NAS). This technical final report will highlight the key findings from project which align closely to the project objectives which are: Identify the contribution of vapor loss, entrainment, and aerosols to the overall emissions of water-lean systems; Determine the significance of CO 2 capture system operating parameters to the amine emissions; Develop an emissions model based on critical operating parameters; Evaluate the effectiveness of emissions mitigation devices to reduce the amine emissions to <1 ppm under flue coal-fired flue gas; and, Determine the contribution of the ECTs to the overall CO 2 capture cost. The following are the key findings based on numerous tests using both lab-scale setups and parametric testing performed at RTI’s Bench-scale Gas Absorption System (BsGAS). During the BP1, the aerosol generation system and monitoring equipment were installed at BsGAS to produce and determine the aerosol characteristics during the NAS CO 2 capture process. The aerosol produced by this setup produced aerosols with the peak diameter and concentration of 50 micron and 1.2E10 7 cm -3 , respectively. These particle sizes and concentrations are matched to those observed in the actual coal-fired power plant flue gases and expected to be found at the absorber inlet of the CO 2 capture system. Over 1,300 hours of parametric testing have been conducted to evaluate the impact of the aerosols and operating conditions during the CO 2 capture with NAS on the overall amine emissions in the treated flue gas. At the worse condition tested, the presence of the aerosols in the flue gas could increase the overall emissions by 10X compared to the baseline emissions from NAS’s vapor pressure. CO 2 capture rate was found to be a main factor impacting the overall emissions as well as aerosol size and concentrations in the absorber off-gas. The higher CO 2 capture rate, the higher amine emissions in the treated gas. The temperature difference between the temperature bulge seen in the absorber and the water wash temperature also impacts the particle growth where the larger the temperature difference, the more amine emissions from aerosols in the treated gas. The majority of the aerosols did not grow substantially in the system, and the particle concentrations remained nearly constant between the absorber inlet and wash outlet. Only a small portion of the particles were found to grow significantly. The high efficiency demister with mesh size of 5-10 micron can be installed to remove a portion of the aerosols from the gas stream leaving the water wash. Overall, these results from parametric testing have established the emission baseline and validate our assumption on the need of emission control technologies (ECT) in order to minimize the emissions from the baseline NAS CO 2 capture process. Over 2,000 of BsGAS operating hours was used to investigate a handful of process improvements which led to a selection of the vital few changes that effectively control the amine emissions. These process improvements are lime-coated-filters for absorber gas inlet, advanced demister at the top of the absorber, a second water wash with amine recovery unit were designed, installed, and tested at BsGAS at the end of BP1. The result showed that the NAS CO 2 capture process with these additional emission control devices could lower the amine emission in the treated gas to about 1 ppm using a simulated coal-fire flue gas stream. The main contributor in lowering the amine emission came from the second water wash with amine recovery unit where the amine concentration in the scrubbing water was kept below 2 wt% through a continuous amine removal via an adsorbent bed, resulting in a low amine vapor pressure. The adsorbent bed was regenerated via a direct steam regeneration and the recover amine was returned to the absorber to minimize wastewater and makeup amine. A flue gas generation system was designed and installed during the first half of BP2 to support the emission testing using a real coal-derived flue gas. The system is capable of generating both coal- and natural gas- derived flue gases with the composition of the gaseous species highly resemble to that of the power plant flue gases. The particulates detected in the coal-derived flue gas showed the mean diameter of 1 micron. The CO 2 capture operating was then proceed using the real coal-derived flue gas where the amine emission was controlled to be about 0-3 ppm for the total run time of about 200 hours. Similar testing was conducted with natural gas-derived flue gas and the result showed a highly amine emission of 30 ppm under the total run time of 200 hours. The Principal Component Analysis (PCA) and the Partial Least Squares Projection to Latent Structures (PLS) techniques were applied to the parametric testing data to derive a multivariate statistical model. The model was validated and trained with half of the data collected, and the predictive ability of the model was evaluated using the remaining half of the data. The resulting empirical model was capable of predicting the overall emissions from the NAS process without the ECTs with ±15% accuracy (average absolute deviation, AAD) in BP1. As more emission data were obtained under the real coal-flue gas in the BP2, the model incorporated these new set of data to reflect the final process configuration, operating parameters, and amine emission. This results in the updated empirical model predicting the amine emission from the NAS CO 2 capture process with 84% goodness-of-fit (R 2 ), 85% predictability (Q 2 ), and 15% AAD. The study evaluates the use of RTI’s Non-Aqueous Solvent technology for 90% CO 2 capture from a net 650 MWe pulverized coal power plant, downstream of the flue-gas desulfurization unit. The captured CO 2 has a purity of > 95% CO 2 , and is dried, compressed to 15.3 MPa (2,215 psia), ready for sequestration. The analysis uses Case B12B from the DOE Baseline study on Bituminous Coal, Revision 4 where the Cansolv CO 2 capture plant is replaced by the RTI CO 2 Capture plant. The CO 2 capture plant has been sized to capture >90% CO 2 from flue gas derived from a net 650 MWe supercritical pulverized coal power plant. The CO 2 capture plant is equipped with emission control technologies that limits the amine emissions to < 1 ppm. Two different cases were evaluated for the technoeconomic study. The key difference between the two cases is the regenerator pressure. In Case 1, the regenerator operates at 0.195 MPa (28.3 psia), whereas in Case 2, the regenerator pressure is 0.44 MPa (64 psia) thus removing the need for the first stage of compression of the eight-stage compression train. Results from the TEA are compared against the DOE reference cases for SCPC plant with and without CO 2 Capture (Case B12A and Case B12B of the DOE Baseline study, respectively). Case 2 with CO 2 regeneration at higher pressure results in the lower cost of CO 2 capture. The total capital cost of the capture process has been estimated using 2018 dollars in Aspen Process Economic Analyzer and was estimated to be $579 MM. The capture plant operation leads to a total parasitic power loss rate of 96 MWe, resulting in a decrease in pulverized coal power plant efficiency of 7.8% points. The resulting cost of electric power increases from 64.4 mills/kWh, for no capture, to 97.5 mills/kWh, with 90% capture, an increase of 51% in the COE. The cost of capturing 90% CO 2 was estimated to be $38.2/tonne-CO 2 , and meets the DOE target of $40/t-CO 2 . Emission control technologies (ECT) investigated in this project includes a second water wash with use of activated carbon beds for removal of amine from the wash water prior to recirculation in the water wash. These ECT allow operation of the CO 2 capture plant with < 1 ppm amine emissions with the treated flue gas and contributes to $2.4/t-CO 2 captured. Amine emissions derived from thermal and oxidative degradations were investigated under this project along with the emissions derived from aerosols for the NAS system. The thermally degraded of the lean NAS showed less than 4% decreased of the original total amine content in the NAS at 150 °C while the result obtained at 120 °C showed no drop in total amine content, suggesting that thermal degradation of the NAS is minimal. These results also suggested that the thermally degraded species are not likely formed and contributed to the emissions due to the low regeneration temperature of the NAS at 90-105 °C. The oxidative degradation, on the other hand, could become problematic as some of these oxidative degraded species were observed during the NAS-5 testing at National Carbon Capture Center (NCCC) and SINTEF in our previous project. The rapid screening of selected inhibitors suggested that oxidative degradation of NAS can be suppressed using thiol containing compounds in amounts of at least 1 mol%. The detailed mechanistic degradation pathway was conceived for a specific amine used in NAS formulation during BP2. he reduction of the nitrosamines caused by the NO x present in the flue gas was also examined. The study suggested that the thermo-chemical treatment of the NAS solvent would be a more effective and economically viable compared to removing NO x at the DCC.

01 COAL, LIGNITE, AND PEAT↗

Design of Hypervelocity Flow Generator (HFG) and Its Diagnostics

Ground facilities for hypersonic research are a key element for successful development of aerodynamically proven hypervelocity vehicles. Design concepts and diagnostics of a hypervelocity flow generator (HFG) were made as a test platform for hypersonic/hypervelocity spacecraft models at the NASA Langley Research Center. The HFG is a hypersonic flow field generator using optically heated gas which is blown into an 80 cu m vacuum chamber. The vacuum chamber is kept at a stable vacuum pressure with a combination of three large vacuum pumps, while the HFG is in the test mode. The HFG provides a relatively small test section with approximately a 20 cm window. This facility was designed to generate 2.45 km/sec of flow speed, and potentially generate a continuous flow with the nozzle and vacuum system. The window in test section provides a direct view of the shock wave around a model in order to measure temperature, pressure, and density profile within the shock layer. One of the key test goals under this project is to understand why the emission spectra from the standing shockwave plasma predicted by Lora-Loran codes are significantly different from the measured emission spectra from the Flight Investigation Reentry Environment (FIRE II) Flight. The correct estimate of the thermal loading on the leading edge of hypersonic vehicles greatly affects the aerodynamic design, the material selection for the vehicle, and the cooling requirement and can be obtained by the precise modeling of emission spectra from shockwave plasma. However, the estimation of thermal loading is not an easy task due to complex non-equilibrium radiative process within high temperature shock layers that still falls into a category of cold plasma. Direct flight experiments are the most desirable, but not a cost-effective approach. Analysis by computational fluid dynamics (CFD) offers many test flexibilities. However, the CFD codes must be fully tested and validated with experimental data before the codes are effectively used for practical design. Large discrepancies between experiments and codes appear in hypersonic/hypervelocity flow regimes at high altitudes of 60 km ~ 90 km. This HFG facility offers some important parameters for CFD code validation, such as collision cross-sections, relaxation times, reaction rate coefficients and transportation coefficients. The HFG test facility is based on the ejection flow of high temperature gas heated over to 3500 K through a nozzle. The tungsten gas chamber of the HFG is heated up to a desired temperature by a 60 kW optical power beam source. This system consists of an optical power source, a thermal chamber, an expansion nozzle, a test section, and an 80 cu m vacuum tank. 60 kW optical input power is obtained from the 150 kW Vortek arc lamp system (by Vortek Industries, Vancouver, Canada). This optical beam is focused to heat the gas chamber within which a flow media is heated. The maximum achievable temperature of the flow medium reached approximately 3500 K or even higher but is limited by the melting point of the chamber material used. The exhaust velocity through the nozzle was determined by the stagnation temperature and the molecular weight of the working medium at the test section. To provide design parameters, a NASA Chemical Equilibrium with Application (CEA) computer program is used for the simulation of aerothermal data. This CEA program can calculate chemical equilibrium and properties of complex mixtures using shock tube parameters. For nitrogen gas at 2666 K stagnation temperature, the maximum achievable velocity at the test section is approximately 2.45 km/sec which is within the range of the thermal velocity of 8000 K shock layer. Based on the calculation through the CEA program, the design parameters of a HFG were determined and implemented for the test section that includes an expansion nozzle. The installed test section of the experimental facility can sustain a condition of a re-entry vehicle from the Space at an altitude of 60-90 km. After installation of the HFG, the system was fully tested and its operational parameters were measured. An 80 cu m vacuum chamber of HFG was set at 1 torr level to keep a stable downstream condition. The pumping time to reach the minimum vacuum pressure (~ 1 torr) at the test chamber from atmospheric pressure was approximately an hour using Kinney (MBV-14000/MB -1600/KT-300) and Stokes (Model 1772 and 412) pumps. Such a setup condition allowed a continued stable operation of the HFG experiment with flowrates through 1-, 3-, or 5-mm diameters of nozzle throat. The flow characteristics of the HFG for various operating conditions were performed using a focused Schlieren method. At 0.8 torr chamber pressure, a barrel shock was observed at the test section. With a sphere obstacle of 12 mm diameter in the flow, a bow shock (~ 2-mm thickness) was observed by a focused Schlieren visualization method.

Hypervelocity flow↗

Editorial: Particulate Matter Emissions From Conventional and Reformulated Fuel Combustion: Advances in Experiments and Simulations

Particulate matter (PM or soot) emissions generated by combustion of conventional and reformulated fuels adversely impact the environment and human health (Bond et al., 2013; Landrigan et al., 2018; World Health Organization (WHO), 2016), generating public awareness and motivating efforts towards the mitigation of their harmful effects. Soot formation is one of the most complex phenomena in combustion, involving interactions between combustion chemistry, fluid mechanics, mass/heat transport, and particle dynamics, spanning different spatial and temporal scales. A fundamental understanding of soot formation process is thus necessary to achieve a strong reduction of PM emissions and design cleaner and more efficient combustion systems. This has motivated a longstanding and ongoing research activity aimed at improving our understanding of the physical and chemical processes involved in soot formation, well reviewed in these recent works (Wang and Chung, 2019; Michelsen et al., 2020; Martin et al., 2022). Despite the wide interest, the transition from gas-phase molecules to incipient soot particles is still elusive and the successive particle growth and oxidation processes are far from being fully understood, especially in conditions relevant to real-world applications. Recent advances in combustion PM emission diagnostic and computational capabilities helped in improving the predictability of fundamental chemical and aerosol models for practical applications, thus tackling some of the above-mentioned challenges. The aim of this research topic is to display the ongoing research efforts in addressing the existing gaps on particulate formation from various fuel sources and in conditions typical of practical combustion applications (e.g. flames, engines, pool fires), through both experimental and numerical approaches.

42 ENGINEERING↗

Formalized Reasoning of Operational Volumes for Wildland Fire Fighting

This work is focused on the formalized reasoning of operational volumes as it relates to the current and future technologies developed by NASA to aid in wildfire fighting operations. One such technology is the unmanned aircraft system pilot kit (UASP-kit) developed by the Scalable Traffic Management for Emergency Response Operations (STEReO) project at NASA, which is used to increase situation awareness for a ground operator in the field. The UASP-kit utilizes operational volumes which represent mission areas and alerting volumes, to alert when another aircraft is within one of these volumes from received ADS-B data. This work is focused on developing a rigorous foundation for the concept of operational volumes for modeling and prototyping operations in such a tool as the UASP-kit. This includes establishing a class of algorithms to detect when an object is in an operational volume, and when an operational volume is intersecting or contained within another. Additionally, this work is focused on providing rigorous proof in an interactive theorem prover that the algorithms work as intended. Scenarios are presented that model current UASP-kit operations and extend past the current capabilities of the technology to modeling more complex scenarios such as mission planning.

Operational Volumes↗

Effects of fire and fire-induced changes in soil properties on post-burn soil respiration

Boreal forests cover vast areas of land in the northern hemisphere and store large amounts of carbon (C) both aboveground and belowground. Wildfires, which are a primary ecosystem disturbance of boreal forests, affect soil C via combustion and transformation of organic matter during the fire itself and via changes in plant growth and microbial activity post-fire. Wildfire regimes in many areas of the boreal forests of North America are shifting towards more frequent and severe fires driven by changing climate. As wildfire regimes shift and the effects of fire on belowground microbial community composition are becoming clearer, there is a need to link fire-induced changes in soil properties to changes in microbial functions, such as respiration, in order to better predict the impact of future fires on C cycling. We used laboratory burns to simulate boreal crown fires on both organic-rich and sandy soil cores collected from Wood Buffalo National Park, Alberta, Canada, to measure the effects of burning on soil properties including pH, total C, and total nitrogen (N). We used 70-day soil incubations and two-pool exponential decay models to characterize the impacts of burning and its resulting changes in soil properties on soil respiration. Laboratory burns successfully captured a range of soil temperatures that were realistic for natural wildfire events. We found that burning increased pH and caused small decreases in C:N in organic soil. Overall, respiration per gram total (post-burn) C in burned soil cores was 16% lower than in corresponding unburned control cores, indicating that soil C lost during a burn may be partially offset by burn-induced decreases in respiration rates. Simultaneously, burning altered how remaining C cycled, causing an increase in the proportion of C represented in the modeled slow-cycling vs. fast-cycling C pool as well as an increase in fast-cycling C decomposition rates. Together, our findings imply that C storage in boreal forests following wildfires will be driven by the combination of C losses during the fire itself as well as fire-induced changes to the soil C pool that modulate post-fire respiration rates. Moving forward, we will pair these results with soil microbial community data to understand how fire-induced changes in microbial community composition may influence respiration.

54 ENVIRONMENTAL SCIENCES↗

Combustion Kinetics Model Development & Fluid Property Experimental Investigation For Improved Design Of Supercritical CO 2 Power Cycle Components

Supercritical carbon dioxide (sCO 2 ) cycles are being investigated for the future of power generation and will contribute to a carbon-neutral future to combat the effects of climate change. These direct-fired closed cycles will produce power without adding significant pollutants to the atmosphere. For such cycles to be efficient, they will need to operate at significantly higher pressures (e.g., 300 atm for Allam Cycle) than existing systems (typically less than 40 atm). There is limited knowledge on combustion at these high pressures and with a high dilution of carbon dioxide. Also, various experimental and computational investigations and model developments have been performed by the University of Central Florida (UCF), Embry-Riddle Aeronautical University (ERAU), and Stanford University (S.U.) to improve the current knowledge base and support the design and development of sCO 2 combustors. This project's technical aspects include chemical kinetics development, fundamental sCO 2 combustion, combustion model and sub-model development, supercritical fluid injection characterization, and heat transfer characterization.

20 FOSSIL-FUELED POWER PLANTS↗

A Global Methane Observation System to Reduce Uncertainty for Anthropogenic and Natural Sources and Sinks for Detecting and Attributing Climate Feedbacks

Atmospheric methane (CH4) concentrations are accelerating global warming as net emissions increase. Observing systems that quantify sources remain too sparse and fragmented to detect trends—especially in remote regions where climate‐driven natural emissions may be rising. We provide a framework for quantifying uncertainty reductions through the implementation of a global ecosystem‐methane observing system designed to: (i) substantially lower uncertainty in sectoral and regional emissions, (ii) separate co‐occurring anthropogenic and natural fluxes, and (iii) trend detection at regional scales to verify mitigation progress and provide early warning of natural feedbacks. Using bottom‐up inventories and process‐model ensembles for 2014–2023, we show that anthropogenic emissions remain uncertain by ∼32% globally, while natural sources—tropical and boreal‐arctic wetlands, fires, and inland waters—carry far larger uncertainties (+ 70%) and trend uncertainties reaching ∼200%. Additional observations must match spatial emission structure to increase observability of emissions: high‐resolution satellite constellations for point sources combined with expanded flux networks and wetland mapping for diffuse sources, and denser ground‐based atmospheric column measurements to restore observability in under‐sampled tropics and high latitudes. Notional analyses indicate that targeted additions of flux towers and ∼20 in situ atmospheric column concentration instruments per key tropical region could reduce continental‐scale uncertainties at modest cost. Conceptual illustration of a Global Ecosystem Methane Observing System (GEM‐OS) integrating satellites, aircraft, atmospheric networks, and ecosystem measurements to quantify methane emissions from anthropogenic and natural sources. The multi‐scale observing framework improves source attribution, reduces uncertainty in regional methane budgets, and enables early detection of climate‐driven feedbacks from wetlands, fires, permafrost, agriculture, and fossil‐fuel emissions.

Ciais, P↗

Quantity, Quality, and Availability of Waste Heat from United States Thermal Power Generation

Secondary application of unconverted heat produced during electric power generation has the potential to improve the life-cycle fuel efficiency of the electric power industry and the sectors it serves. Here this work quantifies the residual heat (also known as waste heat) generated by U.S. thermal power plants and assesses the intermittency and transport issues that must be considered when planning to utilize this heat. Combining Energy Information Administration plant-level data with literature-reported process efficiency data, we develop estimates of the unconverted heat flux from individual U.S. thermal power plants in 2012. Together these power plants discharged an estimated 18.9 billion GJ th of residual heat in 2012, 4% of which was discharged at temperatures greater than 90 °C. We also characterize the temperature, spatial distribution, and temporal availability of this residual heat at the plant level and model the implications for the technical and economic feasibility of its end use. Increased implementation of flue gas desulfurization technologies at coal-fired facilities and the higher quality heat generated in the exhaust of natural gas fuel cycles are expected to increase the availability of residual heat generated by 10.6% in 2040.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗