SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Firefighter's Breathing System (FBS) represents a significant step in applying NASA's crew equipment technologists and technologies to civilian sector problems. This paper describes the problem, the utilization of user-design committees as a forum for development of design goals, the design of the FBS, and the field test program to be conducted.
Experimental results from an analog scale model and from field tests on two glaciers using radio-frequency interferometry (RFI) are interpreted on the basis of previously described theoretical results. The RFI technique is found to be a practical method with which to study layering in low-loss dielectrics. Three parameters of the upper layer can be estimated from the data: the dielectric constant, the loss tangent, and an estimate of the thickness to a reflector. The method is an inexpensive way to sound ice sheets less than a few hundred meters thick, and could be used to study low-loss layers on the moon.
The development of a completely heat sterilizable intermittent positive pressure breathing (IPPB) ventilator in an effort to reduce the number of hospital acquired infections is reported. After appropriate changes in materials and design were made, six prototype units were fabricated and were successfully field tested in local hospitals. Most components of the modified ventilators are compatible with existing machines. In all but a few instances, such as installation of bacteria-retentive filters and a modified venturi, the change over from non-heat-sterilizable to sterilizable units was accomplished by replacement of heat labile materials with heat stable materials.
The design and construction of a gas phase acid sensitive analyzer are reported. These studies showed that the chemical system was a practical analytical method. A complete instrument was developed and prepared for field testing. A Titan 3-C rocket was scheduled for launching on February 11, 1974. Through preparations made by NASA Langley the instrument was set up to monitor the acid concentration in the rocket exhaust. Due to adverse wind conditions no acid was detected. This entire trip is described in detail.
The significant findings are reported for remote sensing of forest lands conducted during the period October 1, 1965 to December 31, 1972. Forest inventory research included the use of aircraft and space imagery for forest and nonforest land classification, and land use classification by automated procedures, multispectral scanning, and computerized mapping. Forest stress studies involved previsual detection of ponderosa pine under stress from insects and disease, bark bettle infestations in the Black Hills, and root disease impacts on forest stands. Standardization and calibration studies were made to develop a field test of an ERTS-matched four-channel spectrometer. Calibration of focal plane shutters and mathematical modeling of film characteristic curves were also studied. Documents published as a result of all forestry studies funded by NASA for the Earth Resources Survey Program from 1965 through 1972 are listed.
An optical cross beam correlation method has been proposed as a remote measuring system for atmospheric studies. Atmospheric measurements are limited due to the difficulty of placing measuring instruments at the desired location. Although meteorological towers and balloon flights are able to obtain wind data, they are greatly limited in their location. Thus, a real need exists for remote-sensing instrumentation in atmospheric measurements. Previous methods proposed to remotely sense atmospheric conditions include several types of microwave units, acoustic sounders, infrared sensors, optical sensors, and related laser techniques. The evaluation of a simple visible optical technique as a possible remote measuring system is discussed. A feasibility study of field tests of the instrumentation at meteorological sites is reported.
For analysis of the data obtained from the cross beam systems it was deemed desirable to compute the auto- and cross-correlation functions by both digital and analog methods to provide a cross-check of the analysis methods and an indication as to which of the two methods would be most suitable for routine use in the analysis of such data. It is the purpose of this appendix to provide a concise description of the equipment and procedures used for the electronic analog analysis of the cross beam data. A block diagram showing the signal processing and computation set-up used for most of the analog data analysis is provided. The data obtained at the field test sites were recorded on magnetic tape using wide-band FM recording techniques. The data as recorded were band-pass filtered by electronic signal processing in the data acquisition systems.
Description of the optical and electronic characteristics of a star sensor developed for the Small Astronomy Satellite B. The specified design goals of the star sensor included an accuracy of 3 arc minutes. Results from field tests and operation in orbit are presented.
The paper presents some new analytical and experimental results on the cross-correlation function and power spectrum for the flow speed by the passive optical crossed-beam correlation technique. Cross-correlation functions of crossed-beam measurements for both intersecting beams and separated beams have been reviewed for the case of varying wind speeds. The corresponding spectral density functions were derived and expressed in terms of the probability density of wind speed variations and the correlation of atmospheric turbulent eddies. The associated spectral density for a special approximate model was derived by assuming a Gaussian distribution of transit times. The theoretical predictions were then compared with actual field test data, and a reasonably good agreement in the valid frequency range was observed.
The application of model referenced adaptive control theory to an optical tracking telescope is discussed. The capability of the adaptive technique to compensate for mount irregularities such as inertial variations and bearing friction is demonstrated via field test results on a large tracking telescope. Results are presented which show a 6 to 1 improvement in tracking accuracy for a worst-case satellite trajectory.
Psychological responses of bus passengers to noise and vibration in terms of ride quality are studied in a field test. An attempt is made to correlate passenger comfort ratings with the age factor.
Compact vision testing apparatus is described for testing a large number of physiological characteristics of the eyes and visual system of a human subject. The head of the subject is inserted into a viewing port at one end of a light-tight housing containing various optical assemblies. Visual acuity and other refractive characteristics and ocular muscle balance characteristics of the eyes of the subject are tested by means of a retractable phoroptor assembly carried near the viewing port and a film cassette unit carried in the rearward portion of the housing (the latter selectively providing a variety of different visual targets which are viewed through the optical system of the phoroptor assembly). The visual dark adaptation characteristics and absolute brightness threshold of the subject are tested by means of a projector assembly which selectively projects one or both of a variable intensity fixation target and a variable intensity adaptation test field onto a viewing screen located near the top of the housing.
An airborne laser depth sounding system was built and taken through a complete series of field tests. Two green laser sources were tried: a pulsed neon laser at 540 nm and a frequency-doubled Nd:YAG transmitter at 532 nm. To obtain a depth resolution of better than 20 cm, the pulses had a duration of 5 to 7 nanoseconds and could be fired up to at rates of 50 pulses per second. In the receiver, the signal was detected by a photomultiplier tube connected to a 28 cm diameter Cassegrainian telescope that was aimed vertically downward. Oscilloscopic traces of the signal reflected from the sea surface and the ocean floor could either be recorded by a movie camera on 35 mm film or digitized into 500 discrete channels of information and stored on magnetic tape, from which depth information could be extracted. An aerial color movie camera recorded the geographic footprint while a boat crew of oceanographers measured depth and other relevant water parameters. About two hundred hours of flight time on the NASA C-54 airplane in the area of Chincoteague, Virginia, the Chesapeake Bay, and in Key West, Florida, have yielded information on the actual operating conditions of such a system and helped to optimize the design. One can predict the maximum depth attainable in a mission by measuring the effective attenuation coefficient in flight. This quantity is four times smaller than the usual narrow beam attenuation coefficient. Several square miles of a varied underwater landscape were also mapped.
Propagation of sound through the lower atmosphere is influenced by numerous factors which are difficult to measure and more difficult to predict. In addition to the well known laboratory observable loss mechanisms of heat conduction, gas transport, and molecular absorption, inhomogeneities in a real atmosphere have significant influence on a propagating sound wave. This study presents a qualitative discussion of different categories of atmospheric inhomogeneity and their individual and combined effects on sound propagation. Subsequently, a field test involving the propagation of aircraft noise over distances up to 10 miles is described, and a simplified empirical model for 'excess' atmospheric attenuation due to inhomogeneities in the atmosphere is derived from the data.
Pneumatic fixture can be used to clamp odd-shaped parts to non-uniform surface. Device can be made from nonmagnetic materials for use in magnetic field test environments. It also applies uniform load over clamped surface.
A one-semester high school course was developed about the use of remote sensing techniques for land earth resources planning and management. The slide-tape-workbook program was field tested with high school students to show a substantial increase in gain of knowledge and an attitude change in application of remote sensing techniques.
The rationale for a Water Vapor Radiometer (WVR) as an aid in predicting tropospheric delay correction is presented. Included is a block diagram and a description of the present developmental WVR with the semiautomated operating sequence outlined. A brief summary of field tests at El Monte airport and Pt. Mugu is given.
Results are reported for a field test that was aimed at acquiring a sufficient set of measurements of aerosol properties required as input for radiative-transfer calculations relevant to the earth's radiation balance. These measurements include aerosol extinction and size distributions, vertical profiles of aerosols, and radiation fluxes. Physically consistent, vertically inhomogeneous models of the aerosol characteristics of a turbid atmosphere over a desert and an agricultural region are constructed by using direct and indirect sampling techniques. These results are applied for a theoretical interpretation of airborne radiation-flux measurements. The absorption term of the complex refractive index of aerosols is estimated, a regional variation in the refractive index is noted, and the magnitude of solar-radiation absorption by aerosols and atmospheric molecules is determined.