Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “entropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

A dual method for maximum entropy restoration

A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.

Smith, C. B.↗

Entropy encoding applied to a video DM bit stream

This paper investigates bandwidth compression of delta modulated video signals using a variety of novel techniques. The video signal is encoded at 16 MHz with an adaptive delta modulator (ADM) using the Song video mode algorithm. One method of achieving bandwidth compression is through the detection and reduction of steady state patterns in the DM bit stream. Further reduction is obtained by deleting the horizontal and vertical drive information. Finally, a modified ADM algorithm is introduced to increase the frequency of steady state patterns. When the modified ADM is combined with entropy coding a 30-50% data compression can be realized.

Barba, J.↗

Structural modelling and control design under incomplete parameter information: The maximum-entropy approach

A stochastic structural control model is described. In contrast to the customary deterministic model, the stochastic minimum data/maximum entropy model directly incorporates the least possible a priori parameter information. The approach is to adopt this model as the basic design model, thus incorporating the effects of parameter uncertainty at a fundamental level, and design mean-square optimal controls (that is, choose the control law to minimize the average of a quadratic performance index over the parameter ensemble).

Hyland, D. C.↗

Entropy, instrument scan, and pilot workload

Experimental results are presented from a set of experiments designed to explore the relationship between the performance, skill, and visual scanning behavior of pilots under varying levels of mental workload. Instrument fixations were recorded as groups of pilots with widely differing levels of skill simultaneously performed a continuous instrument flight task and a verbally presented loading task with four discrete levels. Pilot scanning patterns were found to be significantly affected by the level of mental workload in a manner that was dependent on skill. These scanning alterations were quantified by the methods of entropy and autocorrelation, where the former concerns visual scan path and the latter assesses the relations among scan periodicity, skill level and mental task periodicity.

Tole, J. R.↗

Entropy and vorticity corrections for transonic flows

Different models for inviscid transonic flows are examined. The common assumptions that the flow is isentropic and irrotational are critically evaluated. Entropy and vorticity correction procedures for potential and stream function formlations are presented together with the details of the treatment of shocks and wakes, and drag and lift calculations. The nonuniqueness problem is studied using different artificial viscosity forms. Numerical results are compared to Euler solutions.

Hafez, M.↗

On the maximum-entropy/autoregressive modeling of time series

The autoregressive (AR) model of a random process is interpreted in the light of the Prony's relation which relates a complex conjugate pair of poles of the AR process in the z-plane (or the z domain) on the one hand, to the complex frequency of one complex harmonic function in the time domain on the other. Thus the AR model of a time series is one that models the time series as a linear combination of complex harmonic functions, which include pure sinusoids and real exponentials as special cases. An AR model is completely determined by its z-domain pole configuration. The maximum-entropy/autogressive (ME/AR) spectrum, defined on the unit circle of the z-plane (or the frequency domain), is nothing but a convenient, but ambiguous visual representation. It is asserted that the position and shape of a spectral peak is determined by the corresponding complex frequency, and the height of the spectral peak contains little information about the complex amplitude of the complex harmonic functions.

Chao, B. F.↗

Transonic small disturbance calculations including entropy corrections

Murman's fully conservative mixed type finite-difference operators are first modified. A special sonic point operator with an iterative damping term is introduced which helps the convergence and does not affect the spatial conservative differences. Reliable calculations with second order supersonic schemes are obtained using two sonic operators, the regular sonic point operator followed by a first order supersonic scheme. Also, shock point operator is shown to be equivalent to fitting a locally normal shock terminating the supersonic region. The potential calculations are then modified to account for the non-isentropic jump conditions using a simple shock fitting procedure based on Prandtl relation. The entropy increase across the shock is calculated in terms of the Mach number upstream of the shock and the effect of the generated vorticity is estimated via Crocco relation. Different examples are calculated and extensions to the full potential equation are discussed.

Hafez, M.↗

Entropy bottlenecks in ion-molecule reactions

The significance of entropy bottlenecks in dissociation and recombination pathways in the prototype ionic system CH3 + CH3(+) has been investigated. Ion-molecule systems are shown to react through an entirely different dynamics than neutral systems, due to intrinsic differences in the shapes of the relevant potential surfaces. Consequences with regard to the interpretation of experimental rate parameters in the ion-molecule area are discussed.

Dodd, J. A.↗

Diurnal movements of cotton leaves expressed as thermodynamic work and entropy changes

It is pointed out that some important agricultural crops show heliotropic leaf movements. In these species, the proclivity of leaves to orient either perpendicularly or parallel or in some combination of these positions with respect to the sun is controlled by the leaf turgor and the availability of water. Such an orientational response is particularly noticeable for cotton. Schutt et al. (1985) have detailed leaf trajectories using three angles. The present investigation applies the three-angle representation to leaf trajectory mapping and to the calculation of the phase angle 'gamma' between the individual leaf normals and the solar direction. Using gamma, the thermodynamic work and entropy functions are evaluated and used to distinguish between the behavior of water-stressed and well watered cotton canopies.

Schutt, J. B.↗

An entropy maximization problem related to optical communication

In relation to a problem in optical communication, the paper considers the general problem of maximizing the entropy of a stationary radom process that is subject to an average transition cost constraint. By using a recent result of Justesen and Hoholdt, an exact solution to the problem is presented and a class of finite state encoders that give a good approximation to the exact solution is suggested.

Mceliece, R. J.↗

Toward a proof of entropy increase in the presence of quantum black holes

A sufficient condition for the quantum entropy to be nondecreasing under a trace-preserving positive linear map is that the 'totally random' state be stationary. It is argued that this condition will be satisfied by the quantum system consisting of the region external to one or more black holes. This would explain why a 'generalized second law of thermodynamics' appears to hold in the presence of black holes.

Sorkin, R. D.↗

Entropy and vorticity corrections for transonic flows

Different models for inviscid transonic flows are examined. The common assumptions that the flow is isentropic and irrotational are critically evaluated. Entropy and vorticity correction procedures for potential and stream function formulations are presented, together with the details of the treatment of shocks and wakes, and drag and lift calculations. The non-uniqueness problem of the potential formulation is studied using different artificial viscosity forms. Numerical results are compared with Euler solutions.

Hafez, M.↗

Extrema principles of entropy production and energy dissipation in fluid mechanics

A survey is presented of several extrema principles of energy dissipation as applied to problems in fluid mechanics. An exact equation is derived for the dissipation function of a homogeneous, isotropic, Newtonian fluid, with terms associated with irreversible compression or expansion, wave radiation, and the square of the vorticity. By using entropy extrema principles, simple flows such as the incompressible channel flow and the cylindrical vortex are identified as minimal dissipative distributions. The principal notions of stability of parallel shear flows appear to be associated with a maximum dissipation condition. These different conditions are consistent with Prigogine's classification of thermodynamic states into categories of equilibrium, linear nonequilibrium, and nonlinear nonequilibrium thermodynamics; vortices and acoustic waves appear as examples of dissipative structures. The measurements of a typical periodic shear flow, the rectangular wall jet, show that direct measurements of the dissipative terms are possible.

Horne, W. Clifton↗

Use of maximum entropy method with parallel processing machine

The maximum entropy method (MEM) and balanced correlation method were used to reconstruct the images of low-intensity X-ray objects obtained experimentally by means of a uniformly redundant array coded aperture system. The reconstructed images from MEM are clearly superior. However, the MEM algorithm is computationally more time-consuming because of its iterative nature. On the other hand, both the inherently two-dimensional character of images and the iterative computations of MEM suggest the use of parallel processing machines. Accordingly, computations were carried out on the massively parallel processor at Goddard Space Flight Center as well as on the serial processing machine VAX 8600, and the results are compared.

Yin, Lo I.↗

An entropy and viscosity corrected potential method for rotor performance prediction

An unsteady Full-Potential Rotor code (FPR) has been enhanced with modifications directed at improving its drag prediction capability. The shock generated entropy has been included to provide solutions comparable to the Euler equations. A weakly interacted integral boundary layer has also been coupled to FPR in order to estimate skin-friction drag. Pressure distributions, shock positions, and drag comparisons are made with various data sets derived from two-dimensional airfoil, hovering, and advancing high speed rotor tests. In all these comparisons, the effect of the nonisentropic modification improves (i.e., weakens) the shock strength and wave drag. In addition, the boundary layer method yields reasonable estimates of skin-friction drag. Airfoil drag and hover torque data comparisons are excellent, as are predicted shock strength and positions for a high speed advancing rotor.

Bridgeman, John O.↗

Stochastic model of the NASA/MSFC ground facility for large space structures with uncertain parameters: The maximum entropy approach, part 2

A validated technology data base is being developed in the areas of control/structures interaction, deployment dynamics, and system performance for Large Space Structures (LSS). A Ground Facility (GF), in which the dynamics and control systems being considered for LSS applications can be verified, was designed and built. One of the important aspects of the GF is to verify the analytical model for the control system design. The procedure is to describe the control system mathematically as well as possible, then to perform tests on the control system, and finally to factor those results into the mathematical model. The reduction of the order of a higher order control plant was addressed. The computer program was improved for the maximum entropy principle adopted in Hyland's MEOP method. The program was tested against the testing problem. It resulted in a very close match. Two methods of model reduction were examined: Wilson's model reduction method and Hyland's optimal projection (OP) method. Design of a computer program for Hyland's OP method was attempted. Due to the difficulty encountered at the stage where a special matrix factorization technique is needed in order to obtain the required projection matrix, the program was successful up to the finding of the Linear Quadratic Gaussian solution but not beyond. Numerical results along with computer programs which employed ORACLS are presented.

Hsia, Wei Shen↗