Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Start-to-End Beam Dynamics Simulations for the SRF Accelerator Test Facility at Fermilab

Fermilab is currently building a superconducting RF (SCRF) linear-accelerator test facility. In addition to testing ILC-spec SCRF accelerating modules for ILC and Project-X, the facility will be capable of supporting a variety of advanced acc elerator R&D experiments. The accelerator facility includes a 40-MeV photoinjector capable of producing bunches with variable parameters. In this paper, we present start-to-end simulations of the accelerator beamline.

43 PARTICLE ACCELERATORS↗

A Dissipation-Based Method for Improving the Accuracy of Computational Fluid Dynamics Simulations of High Level Non-Newtonian Waste - 17351

Analysis of shear rate in dissipative scales of turbulence was performed using a quasi-direct numerical simulation (Q-DNS) of flow through a pipe involving Bingham fluid. Dependency of deformation rate on dissipative scales of turbulence was studied and a modification algorithm was developed and implemented in Reynolds-averaged Navier-Stokes (RANS) modeling of the same flow using the standard k-e model. It was shown that the modification was effective in increasing accuracy of the RANS simulations when the velocity profile was modified to match experimental data. In both the Q-DNS and RANS simulations, the Herschel-Bulkley (HB) rheology equation was used to relate shear stress of the non-Newtonian fluid to shear deformation. Additional analysis of dependency of shear on the turbulent dissipation rate (TDR) was performed using various flow conditions in RANS simulations with a modified viscosity model (alpha model). In the past, the alpha model has been shown to produce accurate simulations for the same flow conditions. Results of the analysis shows that a qualitative agreement exists between shear dependency in the RANS-alpha and Q-DNS-HB simulations when the ratio of velocity to length scale is used. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Simulating Dynamic Fracture in Oxide Fuel Pellets Using Cohesive Zone Models

It is well known that oxide fuels crack during the first rise to power, with continued fracture occurring during steady operation and especially during power ramps or accidental transients. Fractures have a very strong influence on the stress state in the fuel which, in turn, drives critical phenomena such as fission gas release, fuel creep, and eventual fuel/clad mechanical interaction. Recently, interest has been expressed in discrete fracture methods, such as the cohesive zone approach. Such models are attractive from a mechanistic and physical standpoint, since they reflect the localized nature of cracking. The precise locations where fractures initiate, as well as the crack evolution characteristics, are determined as part of the solution. This paper explores the use of finite element cohesive zone concepts to predict dynamic crack behavior in oxide fuel pellets during power-up, steady operation, and power ramping. The aim of this work is first to provide an assessment of cohesive zone models for application to fuel cracking and explore important numerical issues associated with this fracture approach. A further objective is to provide basic insight into where and when cracks form, how they interact, and how cracking effects the stress field in a fuel pellet. The ABAQUS commercial finite element code, which includes powerful cohesive zone capabilities, was used for this study. Fully-coupled thermo-mechanical behavior is employed, including the effects of thermal expansion, swelling due to solid and gaseous fission products, and thermal creep. Crack initiation is determined by a temperature-dependent maximum stress criterion, based on measured fracture strengths for UO2. Damage evolution is governed by a traction-separation relation, calibrated to data from temperature and burn-up dependent fracture toughness measurements. Numerical models are first developed in 2D based on both axisymmetric (to explore axial cracking) and plane strain (to explore radial cracking) assumptions. A 3D model is then developed, permitting simultaneous radial and axial fractures. Although fuel cracking is clearly three-dimensional, 2D models are of interest since they are simpler to implement, are much less computationally intensive, and have potential application to existing 2D fuel performance codes. Numerical issues related to cohesive zone models, such as mesh dependency and viscous stabilization, are addressed. Model results indicate that for typical oxide fuel properties, both axial and radial cracking occurs during initial heat-up, well before steady-state thermal gradients are established in the pellet. Cracking results in local stress relief and a shift in peak stress locations, leading to the initiation of new cracks. Continued growth of existing cracks, plus the initiation and growth of additional fractures, is observed during steady operation and power ramping. 3D models provide considerable insight into the progressive interactions between radial and axial cracking. Parametric studies demonstrate the effects of temperature dependent material properties on crack initiation and progression. Increasing fracture strength and toughness with temperature, leads to crack arrest in high temperature regions near the pellet’s symmetry axis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Coupled Cluster Theory for Nonadiabatic Dynamics: Nuclear Gradients and Nonadiabatic Couplings in Similarity Constrained Coupled Cluster Theory

Coupled cluster theory is one of the most accurate electronic structure methods for predicting ground and excited state chemistry. However, the presence of numerical artifacts at electronic degeneracies, such as complex energies, has made it difficult to apply the method in nonadiabatic dynamics simulations. While it has already been shown that such numerical artifacts can be fully removed by using similarity constrained coupled cluster (SCC) theory [J. Phys. Chem. Lett. 2017, 8(19), 4801–4807], simulating dynamics requires efficient implementations of gradients and nonadiabatic couplings. Here, we present an implementation of nuclear gradients and nonadiabatic derivative couplings at the similarity constrained coupled cluster singles and doubles (SCCSD) level of theory, thereby making possible nonadiabatic dynamics simulations using a coupled cluster theory that provides a correct description of conical intersections between excited states. We present a few numerical examples that show good agreement with literature values and discuss some limitations of the method.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Simulating Electron Dynamics of Complex Molecules with Time-Dependent Complete Active Space Configuration Interaction

In this paper, time-dependent electronic structure methods are growing in popularity as tools for modeling ultrafast and/or nonlinear processes, for computing spectra, and as the electronic structure component of mean-field molecular dynamics simulations. Time-dependent configuration interaction (TD-CI) offers several advantages over the widely used real-time time-dependent density functional theory: namely, that it correctly models Rabi oscillations; it offers a spin-pure description of open-shell systems; and a hierarchy of TD-CI methods can be defined that systematically approach the exact solution of the time-dependent Schrodinger equation (TDSE). In this work, we present a novel TD-CI approach that extends TD-CI to large complete active-space configuration expansions. Such extension is enabled by use of a direct configuration interaction approach that eliminates the need to explicitly build, store, or diagonalize the Hamiltonian matrix. Graphics processing unit (GPU) acceleration enables fast solution of the TDSE even for large active spaces—up to 12 electrons in 12 orbitals (853776 determinants) in this work. A symplectic split operator propagator yields long-time norm conservation. We demonstrate the applicability of our approach by computing the response of a large molecule with a strongly correlated ground state, decacene (C 42 H 24 ), to various pulses (δ-function, transform limited, chirped). Our simulations predict that chirped pulses can be used to induce dipole-forbidden transitions. Simulations of decacene using the 6-31G(d) basis set and a 12 electrons/12 orbitals active space took 20.1 h to propagate for 100 fs with a 1 attosecond time step on a single NVIDIA K40 GPU. Convergence with respect to time step is found to depend on the property being computed and the chosen active space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Collaborative study on Earthquake Ground Motion Simulation Using Rupture Dynamics

The objective of this multi-year project between the LLNL and Kyoto University, is the investigation of effects of rupture dynamics on near-fault ground motion amplitude for strike slip earthquakes through rupture dynamics simulations. The work presented in this report was in part performed by Jikai Sun, a graduate student from Kyoto university, during his visit to the LLNL as a summer student. He was trained by Dr. Pitarka in using computer programs for generating rupture models and performing rupture dynamics simulations.

58 GEOSCIENCES↗