SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The power distribution of an electron seam is analyzed. Digital computer techniques are used to evaluate the radial distribution of power detected by a wire probe circulating through the beam. Results are reported.
The three-dimensional leeward separation about a 5 deg semi-angle cone at an 11 deg angle of attack was investigated in flight, in the wind tunnel, and by numerical computations. The test conditions were Mach numbers of 0.6, 1.5, and 1.8 at Reynolds numbers between 7 and 10 million based on free-stream conditions and a 30-inch wetted length or surface. The surface conditions measured included mean static and fluctuating pressures; skin friction magnitudes and separation line positions were obtained using obstacle blocks. The mean static pressures from flight and wind tunnel were in good agreement. The computed results gave the same distributions, but were slightly more positive in magnitude. The experimentally measured primary and secondary separation line locations compared closely with computed results. There were substantial differences in level and in trend between the surface root-mean-square pressure fluctuations obtained in flight and in the wind tunnel, due, it is thought, to a relatively high acoustic disturbance level in the tunnel compared with the quiescent conditions in flight.
Numerical solutions for two-dimensional, time-dependent, separated flows around bodies are obtained, using a new version of the vortex method. This method provides an efficient representation of flows involving large regions of separation. The modifications incorporated in the new version, which improve its accuracy, versatility, and computing speed, are described. The computer cost is only of the order of the 3/2 power on N, instead of N-squared, for each step with N vortices. Arbitrary shapes can be treated; a conformal mapping is not required. Special attention is paid to the viscous character of the solution and to the accurate computation of the pressure distribution at the body surface. The vortex solution for the outer flow is coupled to an inner solution for the attached part of the boundary layer. Numerical results are presented for several bluff bodies exhibiting dependence on Reynolds number, for stationary airfoils under steady or transient conditions and for oscillating airfoils, including dynamic stalls. These results are compared with other available results, analytical or experimental, and demonstrate the enhanced reliability and accuracy of the improved method.
A rotor configuration called the free-tip rotor was analytically investigated for its potential to improve helicopter forward-flight performance characteristics. This rotor differs from a conventional rotor only in the blade tip region. In this configuration, the tip is self-adjusting in pitch with respect to the rest of the blade, in accordance with a moment balance about its pitch axis. With this self-adjusting capability, the resulting pitch motion generates a more uniform airload distribution around the azimuth. Computer math models were used to compare performance characteristics of the free tip rotor with those of a conventional rotor operation at flight speeds from 130 to 160 knots. The results of this analysis indicate that the free-tip rotor improves cruise lift-drag ratio by at least 22%.
Techniques used in the prediction of spacecraft contamination for the Galileo Jupiter Orbiter and in the determination of the effects of such contamination are presented. Following a quick-look assessment of the contributions of ground-based initial contaminant loading, launch vehicle interface effects, vacuum-exposed outgassing deposition and attitude control thruster impingement and venting to the spacecraft contamination burden, the evaluations centered on the effects of the attitude control thruster on the scan platform optics, including calculations of thruster flowfields and a high-fidelity computer simulation of contaminant distribution. The evaluations revealed a considerable problem with thruster contamination, which could be solved by the use of a thrust shield and the avoidance of thruster operation at certain scan platform orientations. The effects of the various possible contaminants on spacecraft thermal and optical system performances were also investigated in studies of the optical transmittance of deposited monomethyl hydrazine nitrate, vacuum optical degradation due to contaminant outgassing and re-emission outgassing, and an operational satellite contaminant monitor on the NOAA-C satellite. It is concluded that with a good evaluation and testing program, contamination control may become a necessary portion of system design procedures, and recommendations for the implementation of various practices and tests to minimize contamination effects are presented.
A new rotor configuration called the free-tip rotor was investigated for its potential to improve helicopter forward-flight performance characteristics. This rotor differs from a conventional rotor only in the blade tip region. Free tip is self-adjusting in pitch with respect to the rest of the blade. With this capability, the resulting pitch motion generated a more uniform airload distribution around the azimuth. Computer math models were used to compare performance characteristics of the free-tip rotor with those of a conventional rotor operating at flight speeds from 130 to 160 knots. The free-tip rotor is shown to improve cruise L/DE by at least 22%.
One-sided confidence regions for continuous cumulative distribution functions are constructed using empirical cumulative distribution functions and the generalized Kolmogorov-Smirnov distance. The band width of such regions becomes narrower in the right or left tail of the distribution. To avoid tedious computation of confidence levels and critical values, an approximation based on the Poisson process is introduced. This aproximation provides a conservative confidence region; moreover, the approximation error decreases monotonically to 0 as sample size increases. Critical values necessary for implementation are given. Applications are made to the areas of risk analysis, investment modeling, reliability assessment, and analysis of fault tolerant systems.
The equations of motion for the cyclotron resonance interaction between coherent whistler mode waves and energetic particles are rederived with the inclusion of relativistic effects. The pitch angle scattering of the near-loss-cone quasi-relativistic electrons trapped in the magnetosphere is studied using a test particle method employing these relativistic equations, and the precipitated energy spectrum due to the wave-induced perturbations of a full distribution of particles is computed. Results show that the full width at half maximum peak width of the rms scattering pattern of the near-loss-cone particles would give an upper bound to the peak width of the associated precipitated energy spectrum under the conditions of moderate wave intensities in the low L shell region. In addition, it is found that the peak widths are within the upper limit values measured by recent satellite experiments. It is concluded that interactions of inner radiation belt particles with monochromatic waves could produce precipitated fluxes with relatively sharp spectral widths, and that therefore the L-dependent narrow peaks observed by low altitude satellite particle detectors could be caused by such interactions.
Methods employed in the analysis of plasmas and the magnetosphere are examined. Computer programs which generate distribution functions are used in the analysis of charging phenomena and non maxwell plasmas in terms of density and average energy. An analytical model for spin curve analysis is presented. A program for the analysis of the differential ion flux probe on the space shuttle mission is complete. Satellite data analysis for ion heating, plasma flows in the polar cap, polar wind flow, and density and temperature profiles for several plasmasphere transits are included.
An algebraic procedure for the generation of boundary-fitted grids about wing-fuselage configurations is presented. A wing-fuselage configuration is specified by cross sections and mathematically represented by Coons' patches. A configuration is divided into sections so that several grid blocks that either adjoin each other or partially overlap each other can be generated, and each grid has six surfaces that map into a computational cube. Grids are first determined on the six boundary surfaces and then in the interior. Grid curves that are on the surface of the configuration are derived using plane-patch intersections, and single-valued functions relating approximate arc lengths along the curves to computational coordinates define the distribution of grid points. The two-boundary technique and transfinite interpolation are used to determine the boundary surface grids that are not on the configuration, and transfinite interpolation with linear blending functions is used to determine the interior grids.
A method for the prediction of steady and unsteady aerodynamic loads and aeroelastic response of advanced turboprops is presented. The aerodynamic analysis uses three dimensional unsteady linearized compressible flow theory to compute the blade pressure distribution. The aeroelastic analysis is based on a normal mode representation of the structure. The method is applicable to both conventional and advanced turbo-prop configurations, provided that blade stall and transonic shock waves are not important factors. Aerodynamic results are presented which validate the model in various limits by comparisons to alternative theories and experimental data. Finally, results of a stability analysis of an advanced turboprop are given, with comparisons to measurements made at NASA Lewis Research Center.
An algebraic procedure for the generation of boundary-fitted grids about wing-fuselage configurations is presented. A wing-fuselage configuration is specified by cross sections and mathematically represented by Coons' patches. A configuration is divided into sections so that several grid blocks that either adjoin each other or partially overlap each other can be generated. Each grid has six exterior surfaces that map into a computational cube. Grids are first determined on the six boundary surfaces and then in the interior. Grid curves that are on the surface of the configuration are derived from the intersection of planes with the Coons' patch definition. Single-valued functions relating approximate arc lengths along the grid curves to a computational coordinate define the distribution of grid points. The two-boundary technique and transfinite interpolation are used to determine the boundary surface grids that are not on the configuration, and transfinite interpolation with linear blending functions is used to determine the interior grid.
The Mast Flight System is composed of several subsystems. Primary among these is the Deployable Mast Subsystem (DMS) which consists of a beam assembly and an associated mechanism for deploying and retracting the beam. The beam assembly is a joint dominated graphite epoxy and titanium truss as is expected of future large space structures. Integral to the beam assembly are actuators, sensors and associated electronics which are available for excitation and damping as desired by the experimenter. The beam structural characteristics can also be modified as desired by the experimenter using the Parameter Modification Device installed at the end of the beam. Data measured on the beam by the sensors and commands to the actuators are transmitted along the beam digitally at 150 Hz using a standard 1553 type bus. The Modular Distributed Information Sybsystem (MDIS) computer functions as bus master and ensures that all experimental data is saved for future analysis. The MDIS computer also performs a safing function to prevent inadvertent overexcitation of the beam. Finally, the Excitation and Damping Subsystem (EDS) computer is available to the experimenter for implementation of control algorithms or any other numerical operations as desired. Data from all system sensors can be accessed by the EDS computer.
The limb flare of November 18, 1980, 14:51 UT, was investigated on the basis of X-ray images taken by the Hard X-ray Imaging Spectrometer (HXIS) and of X-ray spectra from the Hard X-Ray Burst Spectrometer (HXRBS) aboard the Solar Maximum Mission (SMM). The impulsive burst was also recorded at microwave frequencies between 2 and 20 GHz whereas no optical flare and no radio event at frequencies below 1 GHz were reported. The flare occurred directly at the SW limb of the solar disk. Taking advantage of the spatial resolution of HXIS images, the time evolution of the X-radiation originating from relatively small source regions can be studied. Using Monte Carlo computations of the energy distribution of energetic electrons traversing the solar plasma, the bremsstrahlung spectra produced by the electrons were derived.
Program calculates shape of duct to obtain desired flow field. Computer program, DIN3D1, developed for inverse design of simple, unbranched ducts. Inputs from user to computer program are velocity distributions for all surfaces making up duct. Includes upstream and downstream velocity fields and velocities along streamlines forming lateral boundaries of duct. Output of program contains duct geometry and complete flow field through duct. Written in FORTRAN IV.
The main purpose of this project is the development of computer-aided models for purposes of studying the effects of various design changes on the parameters and performance characteristics of the modified Lundell class of alternators (MLA) as components of a solar dynamic power system supplying electric energy needs in the forthcoming space station. Key to this modeling effort is the computation of magnetic field distribution in MLAs. Since the nature of the magnetic field is three-dimensional, the first step in the investigation was to apply the finite element method to discretize volume, using the tetrahedron as the basic 3-D element. Details of the stator 3-D finite element grid are given. A preliminary look at the early stage of a 3-D rotor grid is presented.
An infinitely thin shear layer emanating from a semi-infinite flat plate subjected to acoustic excitation is considered. The flow field outside the excited shear layer is computed employing a source distribution approach. Results are given for the region of the velocity field that cannot easily be obtained by analytical approximations.
A combined Eulerian-Lagrangian analysis which combines a linearized block implicit Navier-Stokes analysis for the continuous phase with a Lagrangian analysis for the discrete phase has been utilized to simulate a two-phase shear-layer flow in a two-dimensional channel flow configuration. The motion of the particles is tracked in computational coordinate space, resulting in improved computational efficiency, and interphase coupling terms for the Eulerian analysis are computed from the instantaneous distribution of the particles rather than the trajectory information. The use of the implicit Navier-Stokes analysis for the continuous phase has made it possible to efficiently use a highly stretched mesh. A low Reynolds number form of the k-epsilon turbulence model was used with near-wall resolution, thus eliminating the need to use the 'wall-function' approach. The streamwise velocity profiles for the continuous and the discrete phases have been compared with experimental data for two test cases.