Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dimensional changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Investigating PID Shunting in Polycrystalline CIGS Devices via Multi-Scale, Multi-Technique Characterization

We investigated potential-induced degradation (PID) in CuIn 1-x Ga x Se 2 (CIGS) mini-modules stressed in the laboratory. Small cores were removed from the modules and were subjected to analysis. We completed a proof-of-concept correlative study relating cathodoluminescence to sodium content via time-of-flight secondary-ion mass spectrometry imaging. By comparing one-dimensional depth profile results and three-dimensional tomography results on stressed and unstressed CIGS mini-modules, we can see that PID in CIGS results from sodium migration through absorber, most likely via grain boundaries. Potassium concentration distributions show little change when adding a voltage bias to a temperature and humidity stress. This suggests doping with other large alkali ions, such as cesium and rubidium, rather than sodium can increase the PID resistance of CIGS modules.

14 SOLAR ENERGY↗
DOE OSTI2019

Complexity and entropy representation for machine component diagnostics

The Complexity-entropy causality plane (CECP) is a parsimonious representation space for time series. It has only two dimensions: normalized permutation entropy and Jensen-Shannon complexity of a time series. This two-dimensional representation allows for detection of slow or rapid drifts in the condition of mechanical components monitored through sensor measurements. The CECP representation can be used for both predictive analytics and visual monitoring of changes in component condition. This method requires minimal pre-processing of raw signals. Furthermore, it is insensitive to noise, stationarity, and trends. These desirable properties make CECP a good candidate for machine condition monitoring and fault diagnostics. In this work we study the effectiveness of CECP on three rotary component condition assessment applications. We use CECP representation of vibration signals to differentiate various machine component health conditions for rotary machine components, namely roller bearing and gears. The results confirm that the CECP representation is able to detect, with high accuracy, changes in underlying dynamics of machine component degradation states. From class separability perspective, the CECP representation is able to generate linearly separable classes for the classification of different fault states. This classification performance improves with increasing signal length. For signal length of 16,384 data points, the fault classification accuracy varies from 90% to 100% for bearing applications, and from 85% to 100% for gear applications. We observed that the optimum parameter for CECP representating depends on the application. For bearing applications we found that embedding dimension D = 4, 5, 6, and embedding delay τ = 1, 2, 3 are suitable for good fault classification. For gear applications we find that embedding dimension D = 4, 5, and embedding delay τ = 1, 5 are suitable for fault classification.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Dynamic population balance in molecular-level simulations of hypersonic flows

This report summarizes the work towards developing stochastic weighted particle methods (SWPM) for future application in hypersonic flows. Extensive changes to Sandia’s direct simulation Monte Carlo (DSMC) solver, SPARTA (Stochastic Particle Real Time Analyzer), were made to enable the necessary particle splitting and reduction capabilities for SWPM. The results from one-dimensional Couette and Fourier flows suggest that SWPM can reproduce the correct transport for a large range of Knudsen numbers with adequate accuracy. The associated velocity and temperature profiles are in good agreement with DSMC. An issue with particle placement during particle number reduction, is identified, to which, a simple but effective solution based on minimizing the center of mass error is proposed. High Mach wheel flows are simulated using the SWPM and DSMC methods. SWPM is capable of providing nearly an order of magnitude increase in efficiency over DSMC while retaining high accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1981

Jet oscillations caused by vorticity interactions with shock waves

A linear theory is developed for the amplification of disturbances along a jet containing shock waves. The theory indicates that near grazing angles (i.e., wave angles near 90 deg) horizontal vorticity is greatly amplified after passing through the two shock waves that exist in a shock cell. The cumulative amplification and the mode that is amplified most can be obtained if the changes in shock parameters from cell to cell are known. Rapid rates of growth of disturbances are exhibited by shadowgraphs and rates of angular displacement of about 10 are observed. The linear two-dimensional theory also indicates that such rates of amplification occur, and that the behavior of a two-dimensional jet is qualitatively similar to that of a round jet.

Parthasarathy, S. P.↗
NASA NTRS1982

Solid rocket booster water impact test

Water impact drop tests were performed on the space shuttle solid rocket boosters (SRB). Peak water impact pressures and pressure/time traces were measured for various impact velocities using a two-dimensional, full-scale SRB aft skirt internal ring model. Passive burst disc-type pressure transducers were calibrated for use on flight SRB's. The effects on impact pressure of small ring configuration changes and application of thermal protection system cork layers were found to be negligible.

Bugg, F.↗
NASA NTRS1986

Field-aligned plasma flow in MHD simulations of magnetotail reconnection and the formation of boundary layers

The outflow from a reconnection region in a realistic magnetotail geometry is studied using a two-dimensional time-dependent, compressible, resistive MHD code. Two cases are emphasized: (1) the evolution of near-earth reconnection, which grows in the form of an internal unstable mode after gradual externally forced changes have initiated an anomalous dissipation process, and (2) the evolution of more distant reconnection under influence of a nonuniform inflow that forces reconnection to occur at a given location in the distant tail. In both cases, it is demonstrated that plasma flow is primarily parallel to the magnetic field in regions away from the localized area of reconnection and outside a narrow central layer.

Birn, J.↗
NASA NTRS1988

A transonic-small-disturbance wing design methodology

An automated transonic design code has been developed which modifies an initial airfoil or wing in order to generate a specified pressure distribution. The design method uses an iterative approach that alternates between a potential-flow analysis and a design algorithm that relates changes in surface pressure to changes in geometry. The analysis code solves an extended small-disturbance potential-flow equation and can model a fuselage, pylons, nacelles, and a winglet in addition to the wing. A two-dimensional option is available for airfoil analysis and design. Several two- and three-dimensional test cases illustrate the capabilities of the design code.

Phillips, Pamela S.↗
NASA NTRS1988

Infrared radiative transfer in dense disks around young stars

A two-dimensional radiative transfer program has been used to determine the temperature distribution within cylindrically symmetric, centrally heated dust clouds. In particular, the disk-shaped structures observed around young luminous stars have been modeled. Changing the dust distribution in these disks primarily affected the observed morphology in the near-infrared and far-infrared, and at millimeter wavelengths. The overall cloud spectrum, however, was mainly determined by the characteristics of the grains themselves. Comparison with published far-infrared and molecular line data has indicated that the dust density can generally be modeled by a power-law distribution in r with index of -2 and an exponential in z with disk thickness proportional to 1/r. When observed nearly edge-on, scattered direct stellar radiation is observed in the polar regions in the form of comet-shaped lobes of emission.

Dent, William R. F.↗
NASA NTRS1990

Long-wave morphological instabilities in the directional solidification of a dilute binary mixture

Long-wave instabilities in a directionally-solidified binary mixture may occur in several limits. Sivashinsky (1983) identified a small-segregation-coefficient limit and obtained a weakly nonlinear evolution equation governing subcritical two-dimensional bifurcation. Brattkus and Davis (1988) identified a near-absolute-stability limit and obtained a strongly nonlinear evolution equation governing supercritical two-dimensional bifurcation. The present investigation identifies a third strongly nonlinear evolution equation, arising in the small-segregation-coefficient, large-surface-energy limit. This equation links both of the former and describes the change from the sub- to super-critical bifurcations. This study sets the previous long-wave analyses into a logical framework.

Riley, D. S.↗
NASA NTRS1991

Program Generates Images Of Solid Surfaces

Solid Surface Modeler (SSM) computer program generates three-dimensional computer models of solid surfaces for use in visual analysis and animation. Provides advanced functions, including Constructive Solid Geometry, Skin Construction, Tube Construction, Material Property Editing, and Texture Map Tools. Allows user to change such attributes as color, reflectivity, smoothing, and position of object easily. Model saved in ASCII or binary format for use in another program or saved in edit format for reloading in SSM. Written in standard C.

Goza, Sharon P.↗
NASA NTRS1991

Global-scale sea surface variability from combined altimetric and tide gauge measurements

By correcting Geosat altimetric data for a set of line frequencies, and then doing a heavy average in space and time, a set of global maps of sea surface variability is produced over time intervals ranging from three months to two years. These maps are demonstrated to be consistent with the global network of tide gauges and sets of maps incorporating those data into the altimetric estimates are also produced. Tide gauge records too fragmentary for computation of a two-year mean are employed by time-differencing them. An estimate of the global difference of sea level change over one year, on very large space scales, shows the effects of the 1987 El Nino. The spherical harmonic coefficients employed in the computations are then used to estimate the full three-dimensional frequency/wavenumber spectrum of surface circulation variability.

Wunsch, Carl↗
NASA NTRS1992

Natural and anthropogenic perturbations of the stratospheric ozone layer

The paper reviews potential causes for reduction in the ozone abundance. The response of stratospheric ozone to solar activity is discussed. Ozone changes are simulated in relation with the potential development of a fleet of high-speed stratospheric aircraft and the release in the atmosphere of chlorofluorocarbons. The calculations are performed by a two-dimensional chemical-radiative-dynamical model. The importance of heterogeneous chemistry in polar stratospheric clouds and in the Junge layer (sulfate aerosol) is emphasized. The recently reported ozone trend over the last decade is shown to have been largely caused by the simultaneous effects of increasing concentrations of chlorofluorocarbons and heterogeneous chemistry. The possibility for a reduction in stratospheric ozone following a large volcanic eruption such as that of Mount Pinatubo in 1991 is discussed.

Brasseur, Guy P.↗
NASA NTRS1991

Study of mass and heat transport of the tropical Atlantic Ocean using models and altimeter data

The specific objectives of this proposal are: (1) to assess the quality of the TOPEX/POSEIDON surface altimeter data in regard to its use for a large, low-frequency monitoring of the surface topography of the tropical Atlantic Ocean; (2) to develop a method, on a demonstration basis, to derive from the tropical Atlantic the depth of the thermocline and the heat content changes from the surface altimeter data field; (3) to develop a method of assimilation of altimeter data into Oceanic General Circulation Models (OGCM's) for the purpose of preparing an operational, permanent, three-dimensional now casting of the tropical Atlantic Ocean (a TOGA objective); and (4) to derive from these models global circulation fields and a time series of mass and meridional heat transports across the tropical Atlantic region (a WOCE objective).

Merle, Jacques↗
NASA NTRS1998

Neural Net-Based Redesign of Transonic Turbines for Improved Unsteady Aerodynamic Performance

A recently developed neural net-based aerodynamic design procedure is used in the redesign of a transonic turbine stage to improve its unsteady aerodynamic performance. The redesign procedure used incorporates the advantages of both traditional response surface methodology (RSM) and neural networks by employing a strategy called parameter-based partitioning of the design space. Starting from the reference design, a sequence of response surfaces based on both neural networks and polynomial fits are constructed to traverse the design space in search of an optimal solution that exhibits improved unsteady performance. The procedure combines the power of neural networks and the economy of low-order polynomials (in terms of number of simulations required and network training requirements). A time-accurate, two-dimensional, Navier-Stokes solver is used to evaluate the various intermediate designs and provide inputs to the optimization procedure. The optimization procedure yields a modified design that improves the aerodynamic performance through small changes to the reference design geometry. The computed results demonstrate the capabilities of the neural net-based design procedure, and also show the tremendous advantages that can be gained by including high-fidelity unsteady simulations that capture the relevant flow physics in the design optimization process.

Madavan, Nateri K.↗
NASA NTRS1999

Skeletal Structural Consequences of Reduced Gravity Environments

The overall goal of this project is to provide structurally meaningful data on bone loss after exposure to reduced gravity environments so that more precise estimates of fracture risk and the effectiveness of countermeasures in reducing fracture risk can be developed. The project has three major components: (1) measure structural changes in the limb bones of rats subjected to complete and partial nonweightbearing, with and without treatment with ibandronate and periodic full weightbearing; (2) measure structural changes in the limb bones of human bedrest subjects, with and without treatment with alendronate and resistive exercise, and Russian cosmonauts flying on the Mir Space Station; and (3) validate and extend the 2-dimensional structural analyses currently possible in the second project component (bedrest and Mir subjects) using 3-dimensional finite element modeling techniques, and determine actual fracture-producing loads on earth and in space.

Ruff, Christropher B.↗
NASA NTRS1997

Three-Dimensional Analysis of Nuclear Size, Shape and Displacement in Clover Root Cap Statocytes from Space and a Clinostat

Under normal (l-g) conditions the statocytes of root caps have a characteristic polarity with the nucleus in tight association with the proximal cell wall; but, in altered gravity environments including microgravity (mu-g) and the clinostat (c-g) movement of the nucleus away from the proximal cell wall is not uncommon. To further understand the cause of gravity-dependent nuclear displacement in statocytes, three-dimensional cell reconstruction techniques were used to precisely measure the volumes, shapes, and positions of nuclei in white clover (Trifolium repens) flown in space and rotated on a clinostat. Seeds were germinated and grown for 72 hours aboard the Space Shuttle (STS-63) in the Fluid Processing Apparatus (BioServe Space Technologies, Univ. of Colorado, Boulder). Clinorotation experiments were performed on a two-axis clinostat (BioServe). Computer reconstruction of selected groups of statocytes were made from serial sections (0.5 microns thick) using the ROSS (Reconstruction Of Serial Sections) software package (Biocomputation Center, NASA Ames Research Center). Nuclei were significantly displaced from the tops of cells in mu-g (4.2 +/- 1.0 microns) and c-g (4.9 +/- 1.4 microns) when compared to l-g controls (3.4 +/- 0.8 gm); but, nuclear volume (113 +/- 36 cu microns, 127 +/- 32 cu microns and 125 +/- 28 cu microns for l-g, mu-g and c-g respectively) and the ratio of nuclear volume to cell volume (4.310.7%, 4.211.0% and 4.911.4% respectively) were not significantly dependent on gravity treatment (ANOVA; alpha = 0.05). Three-dimensional analysis of nuclear shape and proximity to the cell wall, however, showed that nuclei from l-g controls appeared ellipsoidal while those from space and the clinostat were more spherically shaped. This change in nuclear shape may be responsible for its displacement under altered gravity conditions. Since the cytoskeleton is known to affect nuclear polarity in root cap statocytes, those same cytoskeletal elements could also control nuclear shape. This alteration in nuclear shape and position in mu-g and c-g when compared to l-g may lead to functional differences in the gravity signaling systems of plants subjected to altered gravity environments.

Smith, J.D.↗
NASA NTRS2001

Estimation of left ventricular operating stiffness from Doppler early filling deceleration time in humans

Shortened early transmitral deceleration times (E(DT)) have been qualitatively associated with increased filling pressure and reduced survival in patients with cardiac disease and increased left ventricular operating stiffness (K(LV)). An equation relating K(LV) quantitatively to E(DT) has previously been described in a canine model but not in humans. During several varying hemodynamic conditions, we studied 18 patients undergoing open-heart surgery. Transesophageal echocardiographic two-dimensional volumes and Doppler flows were combined with high-fidelity left atrial (LA) and left ventricular (LV) pressures to determine K(LV). From digitized Doppler recordings, E(DT) was measured and compared against changes in LV and LA diastolic volumes and pressures. E(DT) (180 +/- 39 ms) was inversely associated with LV end-diastolic pressures (r = -0.56, P = 0.004) and net atrioventricular stiffness (r = -0.55, P = 0.006) but had its strongest association with K(LV) (r = -0.81, P < 0.001). K(LV) was predicted assuming a nonrestrictive orifice (K(nonrest)) from E(DT) as K(nonrest) = (0.07/E(DT))(2) with K(LV) = 1.01 K(nonrest) - 0.02; r = 0.86, P < 0.001, DeltaK (K(nonrest) - K(LV)) = 0.02 +/- 0.06 mm Hg/ml. In adults with cardiac disease, E(DT) provides an accurate estimate of LV operating stiffness and supports its application as a practical noninvasive index in the evaluation of diastolic function.

Non-NASA Center↗
NASA NTRS1997

Rotor-Stator Interaction Performance Effects

Decreased axial spacing between blade rows in an axial compressor stage is thought to increase stage performance because of an unsteady process that occurs in the downstream blade row and acts on the upstream blade row wakes. This process results in the "recovery" of part of the wake energy before all of this energy is irreversibly lost due to viscous diffusion. To study the wake-blade interaction mechanism, researchers at the NASA Lewis Research Center acquired two-component Laser Fringe Anemometer measurements of the rotor wake in the single-stage transonic compressor at two stage loading levels. The detailed measurements were acquired for one stator pitch in circumference at axial positions from the rotor trailing edge to 20 percent of the stator axial chord, at the exit of the stator passage, and downstream of the stator row including the stator wake. These data show that the changes in wake energy that occur inside the stator passage are not due to viscous dissipation alone, and thus the data provide evidence that "wake recovery" is occurring. A time-accurate, three-dimensional Navier Stokes simulation of the compressor stator was done at the corresponding stage loading levels. The measurements and simulations are being used in combination to show the effects of stator blade loading, quantify the effects of viscosity, and quantify the stage efficiency gain due to the wake recovery process. The accuracy of simple models of the wake recovery process is being evaluated in an effort to include the effects of wake recovery in the NASA-developed Average Passage code for multistage turbomachinery simulations.

VanZante, Dale E.↗