Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Understanding the evolution of liquid and solid microjets from grooved Sn and Cu samples using radiography

Experiments were performed on grooved Sn and Cu samples to study the temporal evolution of microjets. Jets were generated by the impact of gun-launched flyer plates against the back of grooved targets made from either Cu or Sn (groove depth of ~250 μm). The Hugoniot states in the various Sn targets encompassed conditions where solid phases are maintained throughout (7 and 16 GPa) and also conditions where melting occurs upon the release of compression (25 and 34 GPa); the transition occurs near a Hugoniot pressure of 23 GPa. Cu targets at 27 and 56 GPa provide comparisons in which the jets move at similar speeds but remain solid. In all cases, the spatial distribution of mass within the microjets was measured using high-speed synchrotron radiography. The result is a time history of the jet thickness profile from which quantities like total jet mass and jet velocity can be derived. In both the solid and liquid states, we generally observe that an increase in the shock strength leads to an increase in jet mass. However, this trend breaks down for Hugoniot states near the transition from continuously solid to melted-on-release. This is evidenced by the observation that there was no difference in the rate of mass flow in Sn jets at 16 and 25 GPa, while similar pressure jumps on either side of this range caused substantial changes in the jet mass. This contrasts with the behavior of smaller polishing defects that were present on the same samples (~1 μm deep). From these, no ejecta mass was detected below the melt boundary, but obvious microjets were generated once melting occurred. This indicates that crossing the bulk melt-on-release threshold can alternately promote or inhibit the flow of mass into microjets based on the amplitude of the initial perturbation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2003

Effect of Smoke on Cloud Formation during the Biomass Burning Season over the Amazon Basin

Aerosol absorption of sunlight reduces surface irradiation and heats the aerosol layer. The consequent changes in the temperature and humidity profiles can affect cloud formation extent and life time, which is called the semi-direct effect. We evaluate this aerosol semi-direct effect using data collected during the 2002 biomass burning season over the Amazon basin from the MODIS instrument on the Aqua satellite. MODIS measures the cloud coverage and the aerosol optical thickness among the clouds. We found that the radiative heating of the atmosphere and cooling of the surface due to the presence of the smoke decreases the cloud coverage. A very clear negative correlation emerges between the cloud fraction and the smoke optical depth. The results are compared to calculations using 1-D radiation model (M.D. Chou), and used to calculate this regional semi direct effect on climate forcing.

Koren, I.↗
NASA NTRS2016

Connecting the Interstellar Gas and Dust Properties in Distant Galaxies Using Quasar Absorption Systems

Gas and dust grains are fundamental components of the interstellar medium and significantly impact many of the physical processes driving galaxy evolution, such as star-formation, and the heating, cooling, and ionization of the interstellar material. Quasar absorption systems (QASs), which trace intervening galaxies along the sightlines to luminous quasars, provide a valuable tool to directly study the properties of the interstellar gas and dust in distant, normal galaxies. We have established the presence of silicate dust grains in at least some gas-rich QASs, and find that they exist at higher optical depths than expected for diffuse gas in the Milky Way. Differences in the absorption feature shapes additionally suggest variations in the silicate dust grain properties, such as in the level of grain crystallinity, from system-to-system. We present results from a study of the gas and dust properties of QASs with adequate archival IR data to probe the silicate dust grain properties. We discuss our measurements of the strengths of the 10 and 18 micron silicate dust absorption features in the QASs, and constraints on the grain properties (e.g., composition, shape, crystallinity) based on fitted silicate profile templates. We investigate correlations between silicate dust abundance, reddening, and gas metallicity, which will yield valuable insights into the history of star formation and chemical enrichment in galaxies.

Aller, Monique C.↗
DOE OSTI2023

Single-Cell Discovery and Multiomic Characterization of Therapeutic Targets in Multiple Myeloma

Multiple myeloma (MM) is a highly refractory hematologic cancer. Targeted immunotherapy has shown promise in MM but remains hindered by the challenge of identifying specific yet broadly representative tumor markers. We analyzed 53 bone marrow (BM) aspirates from 41 MM patients using an unbiased, high-throughput pipeline for therapeutic target discovery via single-cell transcriptomic profiling, yielding 38 MM marker genes encoding cell-surface proteins and 15 encoding intracellular proteins. Of these, 20 candidate genes were highlighted that are not yet under clinical study, 11 of which were previously uncharacterized as therapeutic targets. The findings were cross-validated using bulk RNA sequencing, flow cytometry, and proteomic mass spectrometry of MM cell lines and patient BM, demonstrating high overall concordance across data types. Independent discovery using bulk RNA sequencing reiterated top candidates, further affirming the ability of single-cell transcriptomics to accurately capture marker expression despite limitations in sample size or sequencing depth. Target dynamics and heterogeneity were further examined using both transcriptomic and immuno-imaging methods. In summary, this study presents a robust and broadly applicable strategy for identifying tumor markers to better inform the development of targeted cancer therapy.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1991

The chromospheres of late-type stars. I - Eridani as a test case of multiline modelling

A new model of the lower chromosphere of the dwarf K2 star Epsilon Eridani is derived by matching flux profiles of the Ca IR triplet lines 8498 and 8542 A H-alpha and H-beta lines and the Na D lines (all observed simultaneously at the AAT), and the Ca II K line. The coupled non-LTE equations of statistical equilibrium and radiative transfer are solved under the constraint of hydrostatic equilibrium using the Carlsson (1986) code. Within the framework of the model, the Na D lines are an important photospheric diagnostic, and the Ca IR triplet lines can be used to locate the temperature minimum. The computed H-alpha and H-beta depths are highly sensitive constraints on the transition zone gradients and base pressures allowing us to derive a pressure at the base of the transition zone of 0.9 dyn/cm.

Thatcher, John D.↗
DOE OSTI2020

Validation and Sensitivity Analysis of a 1-D Lake Model Across Global Lakes

Lakes have important influence on weather and climate from local to global scales. However, their prediction using numerical models is notoriously difficult because lakes are highly heterogeneous across the globe, but observations are sparse. In this study, we assessed the performance of a 1-D lake model in simulating the thermal structures of 58 lakes with diverse morphometric and geographic characteristics by following the phase 2a local lake protocol of the Inter-sectoral Impact Model Intercomparison Project (ISIMIP2a). After calibration, the root-mean-square errors (RMSE) were below 2 °C for 70% and 75% of the lakes for epilimnion and full-profile temperature simulations, with an average of 1.71 °C and 1.43 °C, respectively. The model performance mainly depended on lake shape rather than location, supporting the possibility of grouping model parameters by lake shape for global applications. Furthermore, through machine-learning based parameter sensitivity tests, we identified turbulent heat fluxes, wind-driven mixing and water transparency as the major processes controlling lake thermal and mixing regimes. Snow density was also important for modeling the ice phenology of high-latitude lakes. The relative influence of the key processes and the corresponding parameters mainly depended on lake latitude and depth. Turbulent heat fluxes showed a decreasing importance in affecting epilimnion temperature with increasing latitude. Wind-driven mixing was less influential to lake stratification for deeper lakes while the impact of light extinction, on the contrary, showed a positive correlation with depth. Our findings may guide improvements in 1-D lake model parameterizations to achieve higher fidelity in simulating global lake thermal dynamics.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

NiH2 Cycle Life Study

Cycle life studies have been performed at Eagle Picher Technologies (EPT), on HST Mantech design cells with various pedigrees of slurry and dry sinter processed electrodes, to evaluate peak load voltage performance during generic load profile testing. These tests provide information for determining voltage and capacity fade (degradation) mechanisms, and their impact on nickel hydrogen cell cycle life. Comparison of peak load voltage fade, as a function of State of Charge and cycle life, with capacity data from HST indicates that the cycle life limiting mechanism is due to impedance growth, and formation of a second discharge plateau. With a second plateau on discharge, capacity from the cell is still available, but at an unacceptable low voltage of 0.8 V per cell (17.6 V battery). Data shows that cell impedance increases with cycle number and depth of discharge, as expected.

Hollandsworth, Roger P.↗
NASA NTRS2024

Applications of ArcticDEM for measuring volcanic dynamics, landslides, retrogressive thaw slumps, snowdrifts, and vegetation heights

Topographical changes are of fundamental interest to a wide range of Arctic science disciplines faced with the need to anticipate, monitor, and respond to the effects of climate change, including geohazard management, glaciology, hydrology, permafrost, and ecology. This study demonstrates several geomorphological, cryospheric, and biophysical applications of ArcticDEM – a large collection of publicly available, time-dependent digital elevation models (DEMs) of the Arctic. Our study illustrates ArcticDEM's applicability across different disciplines and five orders of magnitude of elevation derivatives, including measuring volcanic lava flows, ice cauldrons, post-failure landslides, retrogressive thaw slumps, snowdrifts, and tundra vegetation heights. We quantified surface elevation changes in different geological settings and conditions using the time series of ArcticDEM. Following the 2014–2015 Bárðarbunga eruption in Iceland, ArcticDEM analysis mapped the lava flow field, and revealed the post-eruptive ice flows and ice cauldron dynamics. The total dense-rock equivalent (DRE) volume of lava flows is estimated to be (1431 ± 2) million m 3 . Then, we present the aftermath of a landslide in Kinnikinnick, Alaska, yielding a total landslide volume of (400 ± 8) × 103 m 3 and a total area of 0.025 km 2 . ArcticDEM is further proven useful for studying retrogressive thaw slumps (RTS). The ArcticDEM-mapped RTS profile is validated by ICESat-2 and drone photogrammetry resulting in a standard deviation of 0.5 m. Volume estimates for lake-side and hillslope RTSs range between 40,000 ± 9000 m 3 and 1,160,000 ± 85,000 m 3 , highlighting applicability across a range of RTS magnitudes. A case study for mapping tundra snow demonstrates ArcticDEM's potential for identifying high-accumulation, late-lying snow areas. The approach proves effective in quantifying relative snow accumulation rather than absolute values (standard deviation of 0.25 m, bias of −0.41 m, and a correlation coefficient of 0.69 with snow depth estimated by unmanned aerial systems photogrammetry). Furthermore, ArcticDEM data show its feasibility for estimating tundra vegetation heights with a standard deviation of 0.3 m (no bias) and a correlation up to 0.8 compared to the light detection and ranging (LiDAR). The demonstrated capabilities of ArcticDEM will pave the way for the broad and pan-Arctic use of this new data source for many disciplines, especially when combined with other imagery products. The wide range of signals embedded in ArcticDEM underscores the potential challenges in deciphering signals in regions affected by various geological processes and environmental influences.

Chunli Dai↗
NASA NTRS1981

The effects of artificially-produced defects on the film thickness distribution in sliding EHD point contacts

Effects of artificially produced dents and grooves on the elastohydrodynamic film thickness profile in a sliding point contact are investigated using optical interferometry. Defects on the surface of a highly polished ball are held stationary at various locations within the vicinity of the contact region while the disk is rotating. It is shown that defects can dramatically change the film thickness which exists when no defects are present in or near the contact, and it is shown that the change in thickness is mainly a function of the position of the defects in the inlet region, the geometry of the defects, the orientation of the defects in the case of grooves, and the depth of the defect relative to the central film thickness.

Cusano, C.↗
NASA NTRS2016

HST-STIS Spectra of Saturn's Rings and Implications for Their Reddening Agent

We obtained HST-STIS spectra of Saturn's main rings in May 2011, using the G230L (and G430L) gratings, with final averaged radial resolution of 160 (and 330) km/pixel. The dataset filled a previous 200-330nm "spectral gap" between Cassini and ground-based spectra. The data provide radial profiles as a function of wavelength, but our most basic product at this point is a set of very low-noise spectra, radially averaged over broad regions of the rings (A, B, C, and Cassini Division). The raw spectra required special processing to remove artifacts due to extended-source grating scatter. We have modeled the spectra using a new particle surface model, which corrects for on-surface shadowing due to the likely very rough ring particle surfaces, and avoids overestimation of intra-mixed "neutral absorber". We correct for non-classical layer effects and finite ring optical depth, and relate our observed reflectivities to the spherical albedos of individual smooth particles. We model these smooth particle albedos using standard Hapke theory for regolith grain mixtures that are either homogeneous and "intramixed" (nonicy absorbers dispersed in water ice regolith grains) or heterogeneous "intimate" mixtures. As candidates for the nonicy contaminants we have considered amorphous carbon, aromatic-rich and aliphatic-rich organic tholins, silicates, hematite and iron metal. For the A and B rings, we find that iron metal (including a new theoretical estimate of the refractive indices of nanometer-sized grains of iron) is not spectrally steep enough in the 200-300nm range, and that aliphatic-rich tholins are either too steep at short wavelengths or too flat at long wavelengths. However, less than 1% by mass of aromatic-rich tholins provides a very good fit across the entire spectral range with no gratuitous "neutral absorber" needed, and a minimum of additional free parameters. The best fits require forward-scattering regolith grains. For the C Ring and Cassini Division, additional absorbers are needed (updated results will be given).

Saturn's Rings↗
DOE OSTI2020

Constraints on Metastable Helium in the Atmospheres of WASP-69b and WASP-52b with Ultranarrowband Photometry

Infrared observations of metastable 2{sup 3}S helium absorption with ground- and space-based spectroscopy are rapidly maturing, as this species is a unique probe of exoplanet atmospheres. Specifically, the transit depth in the triplet feature (with vacuum wavelengths near 1083.3 nm) can be used to constrain the temperature and mass-loss rate of an exoplanet’s upper atmosphere. Here, we present a new photometric technique to measure metastable 2{sup 3}S helium absorption using an ultranarrowband filter (FWHM 0.635 nm) coupled to a beam-shaping diffuser installed in the Wide-field Infrared Camera on the 200 inch Hale Telescope at Palomar Observatory. We use telluric OH lines and a helium arc lamp to characterize refractive effects through the filter and to confirm our understanding of the filter transmission profile. We benchmark our new technique by observing a transit of WASP-69b and detect an excess absorption of 0.498% ± 0.045% (11.1σ), consistent with previous measurements after considering our bandpass. We then use this method to study the inflated gas giant WASP-52b and place a 95th percentile upper limit on excess absorption in our helium bandpass of 0.47%. Using an atmospheric escape model, we constrain the mass-loss rate for WASP-69b to be 5.25{sub −0.46}{sup +0.65}×10{sup −4} M{sub J} Gyr{sup −1} (3.32{sub −0.56}{sup +0.67}×10{sup −3} M{sub J} Gyr{sup −1}) at 7000 K (12,000 K). Additionally, we set an upper limit on the mass-loss rate of WASP-52b at these temperatures of 2.1×10{sup −4} M{sub J} Gyr{sup −1} (2.1×10{sup −3} M{sub J} Gyr{sup −1}). These results show that ultranarrowband photometry can reliably quantify absorption in the metastable helium feature.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1980

Remote sensing of snow properties by passive microwave radiometry: GSFC truck experiment

Recent results indicate that microwave radiometry has the potential for inferring the snow depth and water equivalent information from snowpacks. In order to assess this potential for determining the water equivalent of a snowpack, it is necessary to understand the microwave emission and scattering behavior of the snow at various wavelengths under carefully controlled conditions. Truck-mounted microwave instrumentation was used to study the microwave characteristics of the snowpack in the Colorado Rocky Mountain region during the winters of 1977 to 78 and 7978 to 79. The spectral signatures of C, X, K sub u, and K sub a band radiometers with dual polarization were used, together with measurements of snowpack density, temperature an ram profiles, liquid water content, and rough characterization of the crystal sizes. These data compared favorably with calculated results based on recent microscopic scattering models.

Chang, A. T. C.↗
NASA NTRS2000

Airborne Sunphotometer, Airborne in-situ, Space-borne, and Ground-Based Measurements of Troposoheric Aerosol in Ace-2

We report on clear-sky column closure experiments performed in the Canary Islands during the second Aerosol Characterization Experiment (ACE-2) in June/July 1997. We present results obtained by combining airborne sunphotometer and in-situ aerosol measurements taken aboard the Pelican aircraft, space-borne NOAA/AVHRR data and ground-based lidars A wide range of aerosol types was encountered throughout the ACE-2 area, including background Atlantic marine, European pollution-derived, and African mineral dust. During !he two days discussed here, vertical profiles flown in cloud free air masses revealed three distinctly different layers: a marine boundary layer (MBL) with varying pollution levels, an elevated dust layer, and a very clean layer between the MBL and the dust layer. We found that the presence of the elevated dust layer removes the good agreement between satellite and sunphotometer AOD usually found in the absence of the dust layer. Using size-resolved composition information we have computed optical properties of the ambient aerosol from the in-situ measurements and subsequently compared those to the sunphotometer results. In the dust, the agreement in layer aerosol optical depth (380-1060 nm) is 3-8%. In the MBL there is tendency for the in-situ results to be slightly lower than the sunphotometer measurements (10-17% at 525 nm), but these differences are within the combined error bars of the measurements and computations.

Schmid, Beat↗
NASA NTRS1976

Lunar seismic profiling experiment natural activity study

The Lunar Seismic Experiment Natural Activity Study has provided a unique opportunity to study the high frequency (4-20 Hz) portion to the seismic spectrum on the moon. The data obtained from the LSPE was studied to evaluate the origin and importance of the process that generates thermal moonquakes and the characteristics of the seismic scattering zone at the lunar surface. The detection of thermal moonquakes by the LSPE array made it possible to locate the sources of many events and determine that they are definitely not generated by astronaut activities but are the result of a natural process on the moon. The propagation of seismic waves in the near-surface layers was studied in a qualitative manner. In the absence of an adequate theoretical model for the propagation of seismic waves in the moon, it is not possible to assign a depth for the scattering layer. The LSPE data does define several parameters which must be satisfied by any model developed in the future.

Duennebier, F. K.↗
NASA NTRS1993

Numerical simulations of galactic wakes

We have performed a series of numerical simulations which examine the simple but realistic case of a galaxy with a smooth potential corresponding to a King profile, and with no interstellar medium. This corresponds to the case of an early-type cluster galaxy that has previously been stripped of its gas. The simulations provide a numerical basis for future work involving galaxies with interstellar media. We use a time-explicit finite difference code (Lufkin & Hawley 1992, ApJ submitted) to obtain solutions to the nonlinear equations for adiabatic flow in axisymmetry. The computational grid covers a region extending 500 kpc from a stationary galaxy radially and along the symmetry axis. We use a graded mesh, allowing for full resolution near the galaxy. Because the assumed potential has a finite depth, no artificial inner boundary condition is necessary; reflection symmetry at the axis is assumed. With a total grid size of 64 radial x 128 vertical, each run requires approximately 5 minutes of cpu time on the NCSA Cray-2.

Lufkin, Eric A.↗
NASA NTRS1994

Infrared spectroscopy of Seyfert 2 galaxies: A look through the obscuring Torus?

We present both high-resolution (R = 1260) and low-resolution (R = 345 and 425) J-band spectra of a sample of 15 Seyfert 2 galaxies. Our goal is to look for broad Pa beta lines, indicating broad-line regions which are hidden by dust from our view at optical wavelengths. Of the 15 objects studied here, three have broad Pa beta lines: MCG-05.23.16, Mrk 463E, and NGC 2992. Mrk 176 and NGC 5728 may also have weak broad lines. In NGC 5506, previously reported to have broad Pa beta and hydrogen alpha lines, we find that the Pa beta line profile is continuous and has the same shape as the nearby line (Fe II) lambda 1.2567, which should not have a broad component. We interpret these observations as gas from the narrow-line region (NLR) with no broad component. In NGC 5506, however, the NLR profiles become broader with increasing wavelength, indicating that highly reddened wings are becoming more readily visible at the longer wavelengths. We confirm the correlation of (O I) lambda 6300/hydrogen alpha and (Fe II) lambda 1.644/Br gamma (the latter transformed to (Fe II) lambda 1.2567/Pa beta to compare with our data) found by previous authors when comparing active galactic nuclei (AGNs), supernova remnants, starbursts, and H II regions. The correlation confirms that in all of these objects both (O I) lambda 6300 and the (Fe II) lines come from partially ionized regions in which hydrogen is mostly neutral. Comparison of the infrared optical depths with column depths determined from X-ray data show a general tendency for the objects with detected broad Pa beta to have lower X-ray columns.

Goodrich, Robert W.↗
NASA NTRS2008

Evaluating Mars Science Laboratory Landing Sites with the Mars Global Reference Atmospheric Model (Mars-GRAM 2005)

The Mars Global Reference Atmospheric Model (Mars-GRAM) is an engineering-level atmospheric model widely used for diverse mission applications. Mars-GRAM s perturbation modeling capability is commonly used, in a Monte-Carlo mode, to perform high fidelity engineering end-to-end simulations for entry, descent, and landing (EDL) [1]. From the surface to 80 km altitude, Mars-GRAM is based on the NASA Ames Mars General Circulation Model (MGCM). Mars-GRAM and MGCM use surface topography from Mars Global Surveyor Mars Orbiter Laser Altimeter (MOLA), with altitudes referenced to the MOLA areoid, or constant potential surface. Traditional Mars-GRAM options for representing the mean atmosphere along entry corridors include: (1) Thermal Emission Spectrometer (TES) mapping years 1 and 2, with Mars-GRAM data coming from NASA Ames Mars General Circulation Model (MGCM) results driven by observed TES dust optical depth or (2) TES mapping year 0, with user-controlled dust optical depth and Mars-GRAM data interpolated from MGCM model results driven by selected values of globally-uniform dust optical depth. Mars-GRAM 2005 has been validated [2] against Radio Science data, and both nadir and limb data from TES [3]. There are several new features included in Mars-GRAM 2005. The first is the option to use input data sets from MGCM model runs that were designed to closely simulate conditions observed during the first two years of TES observations at Mars. The TES Year 1 option includes values from April 1999 through January 2001. The TES Year 2 option includes values from February 2001 through December 2002. The second new feature is the option to read and use any auxiliary profile of temperature and density versus altitude. In exercising the auxiliary profile Mars-GRAM option, values from the auxiliary profile replace data from the original MGCM databases. Some examples of auxiliary profiles include data from TES nadir or limb observations and Mars mesoscale model output at a particular location and time. The final new feature is the addition of two Mars-GRAM parameters that allow standard deviations of Mars-GRAM perturbations to be adjusted. The parameter rpscale can be used to scale density perturbations up or down while rwscale can be used to scale wind perturbations.

Justh, H. L.↗
DOE OSTI2021

Particle velocity measurement within a free-falling particle curtain using microscopic shadow velocimetry

We report an optical method for particle velocity measurement that is suitable for the measurement of particle velocities within dense particle-laden flows with high spatial resolution. The technique is based on particle shadow velocimetry with the use of a long-distance microscopic lens for images collection. The narrow depth of field of the lens allows particles within the focal plane to have much higher pattern intensities than those outside it on the collected images. Data processing was then employed to remove particles from outside the focal plane based on the gradient of the signal and a threshold. Following this, particle velocity was calculated from two successive images in the usual way. The technique was successfully demonstrated in a free-falling particle curtain with volume fractions in the four-way coupling regime of near-spherical micro-particles falling under gravity. The method was successfully employed to measure the transverse velocity profile through the curtain, which is the first time that such a measurement has been performed. Other highly-fidelity experimental data, which is also well suited to model development and validation, include the particle mass flow rate, curtain thickness and opacity.

Han, Shipu (ORCID:0000000278545882)↗