Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computer system performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Computer program for calculation of thermodynamic and transport properties of complex chemical systems

Program performs calculations such as chemical equilibrium for assigned thermodynamic states, theoretical rocket performance for both equilibrium and frozen compositions during expansion, incident and reflected shock properties, and Chapman-Jouget detonation properties. Features include simplicity of input and storage of all thermodynamic and transport property data on master tape.

Svehla, R. A.↗
NASA NTRS1985

Computer-aided selection of materials for cryogenic turbopump bearings

The life requirement for the angular contact ball bearings in the Space Shuttle Main Engine (SSME) high-pressure-oxygen turbopump (HPOTP) is 7.5 hours. In actual operation, significantly shorter service life has been experienced. The objective of this current program is to identify bearing materials and/or materials processing techniques offering significant potential for extending HPOTP bearing performance life. A thermomechanical analysis of the HPOTP shaft/bearing system was performed with the SHABERTH (SHaft-BEaring-THermal) computer program. Bearing fatigue life, ball-race contact stress, heat generation rate, bulk ring temperatures, and circumferential stress in the inner rings were quantified as functions of radial load, thrust load, and ball-race contact friction. The analysis results were used to formulate criteria that are being used for the selection of special materials for future turbopump bearings.

Maurer, R. E.↗
DOE OSTI2025

Entropy-based feature selection for capturing impacts in Earth system models with abrupt forcing

This paper presents the development of a new entropy-based feature selection method for identifying and quantifying impacts. Here, impacts are defined as statistically significant differences in spatio-temporal fields when comparing datasets with and without an external forcing in an Earth system model. Temporal feature selection is performed by first computing the cross-fuzzy entropy to quantify similarity of patterns between two datasets and then applying changepoint detection to identify regions of statistically constant entropy. The method is used to capture temperate north surface cooling from a 9-member simulation ensemble of the Mt. Pinatubo volcanic eruption, which injected 10 Tg of SO 2 into the stratosphere. The results estimate a mean difference decrease in near surface air temperature of -0.560 K with a 99% confidence interval between -0.864 K and -0.257 K between April and November of 1992, one year following the eruption. A sensitivity analysis with decreasing SO 2 injection revealed that the impact is statistically significant at 5 Tg but not at 3 Tg. Using identified features, a dependency graph model based on a 9-day lag had significantly fewer nodes than a graph based on monthly means. Furthermore, this demonstrates our method’s ability to perform dimension reduction while still uncovering source-to-impact pathways.

Changepoint detection↗
NASA NTRS1986

Simulation studies for the NASA scatterometer on NROSS

A methodology for the design of a spaceborne radar scatterometer system configuration which includes parameters such as antenna pointing angles, antenna azimuth angles, antenna polarization, and measurement swath locations is presented. The methodology was applied to the NASA Scatterometer (NSCAT). The performance tradeoff studies on the NSCAT system configuration required development of a computer simulation to estimate wind retrieval accuracy for a given system configuration; and a series of metrics to quantify the simulation results and allow direct comparison of the performance for different configurations.

Chi, Chong-Yung↗
DOE OSTI2018

ATLAS BigPanDA monitoring

BigPanDA monitoring is a web application that provides various processing and representation of the Production and Distributed Analysis (PanDA) system objects states. Analysing hundreds of millions of computation entities, such as an event or a job, BigPanDA monitoring builds different scales and levels of abstraction reports in real time mode. Provided information allows users to drill down into the reason of a concrete event failure or observe the broad picture such as tracking the computation nucleus and satellites performance or the progress of a whole production campaign. PanDA system was originally developed for the ATLAS experiment. Currently, it manages execution of more than 2 million jobs distributed over 170 computing centers worldwide on daily basis. BigPanDA is its core component commissioned in the middle of 2014 and now is the primary source of information for ATLAS users about the state of their computations and the source of decision support information for shifters, operators and managers. In this work, we describe the evolution of the architecture, current status and plans for the development of the BigPanDA monitoring.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

Characterizing Temperature, Power, and Soft-Error Behaviors in Data Center Systems: Insights, Challenges, and Opportunities

GPUs have become part of the mainstream high performance computing facilities that increasingly require more computational power to simulate physical phenomena quickly and accurately. However, GPU nodes also consume significantly more power than traditional CPU nodes, and high power consumption introduces new system operation challenges, including increased temperature, power/cooling cost, and lower system reliability. This paper explores how power consumption and temperature characteristics affect reliability, provides insights into what are the implications of such understanding, and how to exploit these insights toward predicting GPU errors using neural networks.

Nie, Bin↗
NASA NTRS1977

Performance of DPSK with convolutional encoding on time-varying fading channels

The bit error probability performance of a differentially-coherent phase-shift keyed (DPSK) modem with convolutional encoding and Viterbi decoding on time-varying fading channels is examined. Both the Rician and the lognormal channels are considered. Bit error probability upper bounds on fully-interleaved (zero-memory) fading channels are derived and substantiated by computer simulation. It is shown that the resulting coded system performance is a relatively insensitive function of the choice of channel model provided that the channel parameters are related according to the correspondence developed as part of this paper. Finally, a comparison of DPSK with a number of other modulation strategies is provided.

Mui, S. Y.↗
DOE OSTI2019

Method for securing a network using cyber economic network transaction security (CENTS)

A method and system for administering an interactive computer network and more particularly to performing security in a network of interactive electronic components, such as a computer network using a currency-based transactional economy model where scarcity serves as a limiting factor to accessing and engaging in various activities within the system.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Verification of the REBUS Software

Ongoing design activities at Argonne National Laboratory are requiring a thorough verification of the Argonne Reactor Computation codes be performed. REBUS is central to this system. The driver for this effort requires the Triangular-Z and hexagonal-Z core geometry options of REBUS to be verified. Previous work identified the REBUS features required to be verified to support current design activities, features of which are generally applicable to hexagonal-Z fast reactor designs. The scope of this verification effort includes verifying REBUS’s ability to correctly intepret the user input model, verifying that the features identified yield the intended results, and verifying the correctness of the REBUS output tables. The REBUS software verification relies heavily upon the accuracy of the embedded DIF3D software, the verification of which was completed and documented elsewhere. Given that DIF3D produces an accurate solution, the primary focus of the verification in the REBUS software is to ensure that it properly uses the DIF3D solution and that the depletion system (Bateman equations) are correctly implemented. This manuscript reiterates the verification tasks and displays results with respect to the features needed for current design activities. Analytic solutions of the Batemen equations are displayed and the results calculated with REBUS are displayed demonstrating the accuracy. Since coupled Bateman and neutron diffusion/transport solutions are extremely difficult to obtain, much of the focus is placed on how REBUS uses a given DIF3D solution assuming the accuracy of the DIF3D solution. The verification effort identified no issues that are debilitating or otherwise impactful to the design usage of REBUS, and thus REBUS version 11.0, release 3012 is considered verified. It is important to note that several outputs of REBUS are identified to be inaccurate, such as burnup in MWD/MT. Most of the relevant ones for VTR are generally accurate with 10-20% errors which is not impactful as all regular REBUS users are aware of this issue and know how to hand calculate the results. The REBUS manual further makes it clear that these values are consistent with the methodology being used by REBUS and thus the “errors” are more of an inconsistent definition with respect to what a user would expect given a definition in literature. Other issues that were identified included unclear documentation and software bugs all of which were inconsequential to the final results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1966

System monitors discrete computer inputs

Computer system monitors inputs from checkout devices. The comparing, addressing, and controlling functions are performed in the I/O unit. This leaves the computer main frame free to handle memory, access priority, and interrupt instructions.

Burns, J. J.↗
NASA NTRS1982

The pilot's role in manned space flight

The present investigation regarding the pilot's role in manned space flight takes into account space missions conducted with the Mercury capsule, Gemini, Apollo, Skylab, and the Shuttle. It is concluded that advancements in digital systems and automation technology have made many of the space pilot's tasks easier. However, these advancements have also made the space pilot's training more complicated. He must be familiar with the interrelated failure effects in highly complex vehicle systems. The nominal performance of the Shuttle fly-by-wire entry control system depends, for instance, on nominal electrical power from three fuel cells, nominal performance of three hydraulic auxiliary power units, five computers, other equipment, and microwave landing systems. The pilot must monitor and manage failures in these systems, and, in addition, must be prepared to intervene if an abort situation creates off-nominal conditions.

North, W. J.↗
NASA NTRS1974

A flight investigation of a terminal area navigation and guidance concept for STOL aircraft

A digital avionics system referred to as STOLAND has been test-flown in the NASA CV-340 to obtain performance data for time-controlled guidance in the manual flight director mode. The advanced system components installed in the cockpit included an electronic attitude director indicator and an electronic multifunction display. Navigation guidance and control computations were all performed in the digital computer. Approach paths were flown which included a narrow 180-deg turn and a 1-min, 5-deg straight-in approach to the 30-m altitude go-around point. Results are presented for 20 approaches: (1) blended radio/inertial navigation using TACAN and a microwave scanning beam landing guidance system (MODILS) permitted a smooth transition from area navigation (TACAN) to precision terminal navigation (MODILS), (2) guidance system (flight director) performance measured at an altitude of 30.5 m was within that prescribed for category II CTOL operations on a standard runway, and (3) time of arrival at a point about 2 mi from touchdown was about 4 sec plus or minus sec later than the computed nominal arrival time.

Smith, D. W.↗
NASA NTRS2018

2040 Vision: A Roadmap for Integrated, Multiscale Materials and System Modeling and Simulation

Over the last few decades, advances in high-performance computing, new materials characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) and additive manufacturing have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. While these advances have driven significant progress in the development of aerospace components and systems, that progress has been limited by persistent technology and infrastructure challenges that must be overcome to realize the full potential of integrated materials and systems design and simulation modeling throughout the supply chain. As a result, NASA's Transformational Tools and Technology (TTT) Project sponsored a study (performed by a team led by Pratt & Whitney) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. This talk will describe the findings of this 2040 Vision study (e.g., the 2040 vision state; the required interdependent core technical work areas, Key Element (KE); associated critical gaps and actions to close those gaps; and major recommendations). This roadmap is a community consensus document and is a result of over 450 professionals input obtain via: i) four society workshops (AIAA, NAFEMS, and two TMS), ii) community-wide survey, and iii) the establishment of 9 expert panels (one per key element) consisting on average 10 non-team members from academia, government and industry to review, update content, and prioritize gaps and actions. It is NASA's hope and desire that this roadmap provides the strategic guidance to both public and private research and development decision makers to make the proposed 2040 vision state a reality and thereby provide a significant advancement in the United States global competitiveness.

Multiscale Modeling↗
NASA NTRS1974

Skylab extravehicular mobility unit thermal simulator

The analytical methods, thermal model, and user's instructions for the Skylab Extravehicular Mobility Unit (SEMU) routine are presented. This digital computer program was developed for detailed thermal performance predictions of the SEMU on the NASA-JSC Univac 1108 computer system. It accounts for conductive, convective, and radiant heat transfer as well as fluid flow and special component characterization. The program provides thermal performance predictions for a 967 node thermal model in one thirty-sixth (1/36) of mission time when operated at a calculating interval of three minutes (mission time). The program has the operational flexibility to: (1) accept card or magnetic tape data input for the thermal model describing the SEMU structure, fluid systems, crewman and component performance, (2) accept card and/or magnetic tape input of internally generated heat and heat influx from the space environment, and (3) output tabular or plotted histories of temperature, flow rates, and other parameters describing system operating modes.

Hixon, C. W.↗
NASA NTRS2000

Numerical Zooming Between a NPSS Engine System Simulation and a One-Dimensional High Compressor Analysis Code

Within NASA's High Performance Computing and Communication (HPCC) program, NASA Glenn Research Center is developing an environment for the analysis/design of aircraft engines called the Numerical Propulsion System Simulation (NPSS). NPSS focuses on the integration of multiple disciplines such as aerodynamics, structures, and heat transfer along with the concept of numerical zooming between zero-dimensional to one-, two-, and three-dimensional component engine codes. In addition, the NPSS is refining the computing and communication technologies necessary to capture complex physical processes in a timely and cost-effective manner. The vision for NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Of the different technology areas that contribute to the development of the NPSS Environment, the subject of this paper is a discussion on numerical zooming between a NPSS engine simulation and higher fidelity representations of the engine components (fan, compressor, burner, turbines, etc.). What follows is a description of successfully zooming one-dimensional (row-by-row) high-pressure compressor analysis results back to a zero-dimensional NPSS engine simulation and a discussion of the results illustrated using an advanced data visualization tool. This type of high fidelity system-level analysis, made possible by the zooming capability of the NPSS, will greatly improve the capability of the engine system simulation and increase the level of virtual test conducted prior to committing the design to hardware.

Follen, Gregory↗
NASA NTRS2017

Comparison of Taxi Time Prediction Performance Using Different Taxi Speed Decision Trees

In the STBO modeler and tactical surface scheduler for ATD-2 project, taxi speed decision trees are used to calculate the unimpeded taxi times of flights taxiing on the airport surface. The initial taxi speed values in these decision trees did not show good prediction accuracy of taxi times. Using the more recent, reliable surveillance data, new taxi speed values in ramp area and movement area were computed. Before integrating these values into the STBO system, we performed test runs using live data from Charlotte airport, with different taxi speed settings: 1) initial taxi speed values and 2) new ones. Taxi time prediction performance was evaluated by comparing various metrics. The results show that the new taxi speed decision trees can calculate the unimpeded taxi-out times more accurately.

taxi time prediction↗
DOE OSTI2022

Verification of the DIF3D Software to Support Fast Reactor Analysis

Ongoing design activities at Argonne National Laboratory are requiring a thorough verification of the Argonne Reactor Computation codes be performed. DIF3D is central to this system. The driver for this effort requires the 3D Cartesian, triangular-Z, and hexagonal-Z core geometry options of DIF3D be verified. Previous work identified the DIF3D features required to be verified to support current design activities, features of which are generally applicable to hexagonal-Z fast reactor designs. The scope of this verification effort includes verifying DIF3D’s ability to correctly translate the user’s model in to DIF3D’s preferred format, verifying that options planned for use have the desired effect, and verifying the correctness of the eigenvalue, fixed-source, forward, and adjoint solvers in DIF3D-FD and DIF3D-VARIANT. This manuscript provides the verification tasks and their results with respect to the features needed for current design activities. Since analytic solutions of the neutron diffusion and transport equations are either limited in scope or not possible, multiple tiers of problems unique to each solver and geometry type were implemented. Each of these tiers tests features independent and complementary arguments for why the separate testing of functionalities is acceptable. Finally, this separate testing was also supplemented with a high-level integral check of each the diffusion and transport capabilities and applicable geometries. To accommodate cases which an analytic solution is not feasible, MCNP6.2 was relied upon to provide a higher-order reference solution. This therefore required that the capabilities within MCNP6.2 which were relied upon for this work are also verified in this work. No MCNP discrepancies were noted in this effort. Note that the MCNP6.2 verification included in this work does not stand as a full verification of MCNP6.2, but merely verifies the features used in verifying DIF3D. The verification effort identified no issues that are debilitating or otherwise impactful to design usage of DIF3D, and thus DIF3D version 11.0, release 3012 is considered verified. As some additional changes have been made to the ARC software since this point all versions between release 3012 and 3266 can be considered verified as version 3253 was used for all updates in this revision. The types of issues that were identified were predominantly in the areas of: unclear documentation, software bugs which were inconsequential to final results, editing options which were ignored in favor of printing more information than requested, bugs in the outputs of intermediate results, or secondary output binary file information which was not present. While not a bug, this verification report also identified that the algorithm used to evaluate the peak fast flux in a nodal transport solution can be quite unreliable due to the methodology used and the location of the peak within the mesh. The authors of the report therefore recommend the usage of the EvaluateFlux software (distributed with ARC) as a more robust alternative noting that DIF3D will properly notify the user when the peaking values it is providing are potentially incorrect.

97 MATHEMATICS AND COMPUTING↗