Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “biasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Evaluation of the Seasat altimeter time tag bias

Two methods were used in analyses of Seasat altimeter data, aimed at the corroboration of an inherent altimeter microprocessor delay compensation value of -79.4 msec, which benefited from a global data distribution in the oceanic areas: (1) the crossover method, using altimeter data differenced at points where the Seasat ground track intersected with itself, and (2) the direct use of the altimeter data. Because the former method is independent of errors in the geoid model, it is considered the more reliable. For all crossover method results, the adopted value of -79.4 msec is within the bounds of the standard deviation associated with the estimates, of which -78.1 + or - 2.0 msec is considered the best representative.

Schutz, B. E.↗
NASA NTRS1983

A rotationally biased upwind difference scheme for the Euler equations

The upwind difference schemes of Godunov, Osher, Roe and van Leer are able to resolve one dimensional steady shocks for the Euler equations within one or two mesh intervals. Unfortunately, this resolution is lost in two dimensions when the shock crosses the computing grid at an oblique angle. To correct this problem, a numerical scheme was developed which automatically locates the angle at which a shock might be expected to cross the computing grid and then constructs separate finite difference formulas for the flux components normal and tangential to this direction. Numerical results which illustrate the ability of this method to resolve steady oblique shocks are presented.

Davis, S. F.↗
NASA NTRS1983

Potentials in a plasma over a biased pinhole

The NASCAP/LEO code is used to simulate measurements taken at Jet Propulsion Laboratory of potentials near a simulated pinhole. The insulator near the high-voltage pinhole obeys an electric field boundary condition resulting from secondary electron hopping conductivity. The code predictions are in good agreement with the measurements.

Mandell, M. J.↗
NASA NTRS1985

A Natural Bias Approach to Cardinal Spline Curves

The cardinal spline approach to defining interpolatory curves is of interest in the application of computer graphics to modelling and animation problems. The formulation of this interpolation problem (C) a vector valued function V is obtained which forms a C1 map from 0,n into the plane in such a way that V(i) and V prime (i) attain prespecified (vector) values P sub i and T sub i for the integers i=0, 1,...n. The intent is that the planar curves V(s) pass through each point P sub i in the direction corresponding to T sub i. In actual practice it is common for only the interpolation points P sub i to be user specified. Suitable tangents T sub i are then provided by some heuristic to complete the specification of (C). A convex control polygon yields a convex interpolant. Examples exist where the interpolant fails to be convex if the tangents are left unbiased.

Fletcher, G. Y.↗
NASA NTRS1984

A rotationally biased upwind difference scheme for the Euler equations

The upwind difference schemes of Godunov, Osher, Roe and van Leer are able to resolve one dimensional steady shocks for the Euler equations within one or two mesh intervals. Unfortunately, this resolution is lost in two dimensions when the shock crosses the computing grid at an oblique angle. To correct this problem, a numerical scheme was developed which automatically locates the angle at which a shock might be expected to cross the computing grid and then constructs separate finite difference formulas for the flux components normal and tangential to this direction. Numerical results which illustrate the ability of this method to resolve steady oblique shocks are presented.

Davis, S. F.↗
NASA NTRS1984

Numerical simulations of positively-biased probes and dielectric-conductor disks in a plasma

Plasma densities in the low-earth orbit range may be sufficient to cause difficulties for spacecraft operating at high voltages in this environment. The present investigation is concerned with the results of a continuing effort to develop a particle-in-cell (PIC), cylindrically-symmetric, 2-1/2 dimensional, self-consistent numerical simulation code. The simulation has the objective to explore the interactions of an ambient plasma with a conducting disk, which may be partially covered by a dielectric material. The disk and the surrounding dielectric material represent a hole in an insulator covering a conductor. Attention is given to a review of the simulation model, plain disk calculations, the disk and dielectric configuration, and the 'pinhole' effect.

Brandon, S. T.↗
NASA NTRS1985

Ocean acoustic tomography - Travel time biases

The travel times of acoustic rays traced through a climatological sound-speed profile are compared with travel times computed through the same profile containing an eddy field. The accuracy of linearizing the relations between the travel time difference and the sound-speed deviation at long ranges is assessed using calculations made for two different eddy fields measured in the eastern Atlantic. Significant nonlinearities are found in some cases, and the relationships of the values of these nonlinearities to the range between source and receiver, to the anomaly size associated with the eddies, and to the positions of the eddies are studied. An analytical model of the nonlinearities is discussed.

Spiesberger, J. L.↗
NASA NTRS1989

Systematic biases in radiometric diameter determinations

Radiometric diameter determinations are presently shown to often be significantly affected by the effect of rotation. This thermal effect of rotation depends not only on the object's thermal inertia, rotation rate, and pole orientation, but also on its temperature, since colder objects having constant rotation rate and thermal inertia will radiate less of their heat on the diurnal than on the nocturnal hemisphere. A disk-integrated beaming parameter of 0.72 is determined for the moon, and used to correct empirically for the roughness effects in thermophysical models; the standard thermal model is found to systematically underestimate cold object diameters, while overstating their albedos.

Spencer, John R.↗
NASA NTRS1990

SPEAR-1: An experiment to measure current collection in the ionosphere by high voltage biased conductors

An experiment is described in which a high electrical potential difference, up to 45 kV, was applied between deployed conducting spheres and a sounding rocket in the ionosphere. Measurements were made of the applied voltage and the resulting currents for each of 24 applications of different high potentials. In addition, diagnostic measurements of optical emissions in the vicinity of the spheres, energetic particle flow to the sounding rocket, dc electric field and wave data were made. The ambient plasma and neutral environments were measured by a Langmuir probe and a cold cathode neutral ionization gauge, respectively. The payload is described and examples of the measured current and voltage characteristics are presented. The characteristics of the measured currents are discussed in terms of the diagnostic measurements and the in-situ measurements of the vehicle environment. In general, it was found that the currents observed were at a level typical of magnetically limited currents from the ionospheric plasma for potentials less than 12 kV, and slightly higher for larger potentials. However, due to the failure to expose the plasma contactor, the vehicle sheath modified the sphere sheaths and made comparisons with the analytic models of Langmuir-Blodgett and Parker-Murphy less meaningful. Examples of localized enhancements of ambient gas density resulting from the operation of the attitude control system thrusters (cold nitrogen) were obtained. Current measurements and optical data indicated localized discharges due to enhanced gas density that reduced the vehicle-ionosphere impedance.

Raitt, W. John↗
NASA NTRS1991

An upwind-biased space marching algorithm for supersonic viscous flow

The modifications are documented which were made to the Langley Aerothermodynamic Upwind Relaxation Algorithm which allow it to compute solutions in a space marching manner. The space marching flux is formulated to be either first- or second-order accurate, using Roe's upwind differencing or Symmetric Total Variation Diminishing differencing, respectively. The algorithm solves the thin layer Navier-Stokes equations, and is subject to the same flow restrictions as a parabolized Navier-Stokes solver. Each cross flow plane is locally iterated in time until converged, then marched in space to the next station. The algorithm is tested on a sphere-cone geometry and a geometry which models the windward side of the Space Shuttle Orbiter. Computational results for surface heating are compared to ground based experimental data. In addition, space marching predictions for surface pressure are compared against values from the original algorithm.

Greene, Francis A.↗
NASA NTRS1991

Geomagnetic model investigations for 1980 - 1989: A model for strategic defense initiative particle beam experiments and a study in the effects of data types and observatory bias solutions

Two suites of geomagnetic field models were generated at the request of Los Alamos National Lab. concerning Strategic Defense Initiative (SDI) research. The first is a progression of five models incorporating MAGSAT data and data from a sequence of batches as a priori information. The batch sequence is: post 1979.5 observatory data, post 1980 land survey and selected aeromagnetic and marine survey data, a special White Sands (NM) area survey by Project Magnet with some additional post 1980 marine survey data, and finally DE-2 satellite data. These models are of 13th deg and order in their main field terms, and deg and order 10 in their first derivative temporal terms. The second suite consists of four models based solely upon post 1983.5 observatory and survey data. They are of deg and order 10 in main field and 8 in a first deg Taylor series. A comprehensive error analysis was applied to both series, which accounted for error sources such as the truncated core and crustal fields, and the neglected Sq and low deg crustal fields. Comparison of the power spectrum of the MGST (10/81) model with those of this series show good agreement.

Langel, Robert A.↗
NASA NTRS1991

An investigation to determine the producibility of a 3-D braider and bias direction weaving loom

The development of prototype machines for the production of generalized braid patterns is described. Mechanical operating principles and control strategies are presented for two prototype machines which were fabricated and evaluated. Both machines represent advances over current techniques for forming composite material preforms by enabling near ideal control of fiber orientation. Furthermore, they overcome both the lack of general control of produced fiber architectures and the complexity of other weaving processes that were produced for the same purpose. One prototype, the modified Farley braider, consists of an array of turntables which can be rotated 90 degrees and returned; hence, they can form tracks in the x and y axis. Yarn ends are transported about the surface formed by the turntables using motorized tractors. These tractors are controlled using an optical link with a control circuit and host computer. The tractors are powered through electrical contact with the turntables. The necessary relative motions are produced by a series of linear tractor moves combined with a sequence of turntable rotations. The movement of the tractors about the surface causes the yarns to produce the desired braiding pattern. The second device, the shuttle plate braider, consists of a braiding surface formed by an array of square elements, each separated from its neighbor by a gap. Beneath this surface lies a shuttle plate, which reciprocates first in one axis and then in the other. As this movement takes place, yarn carrying shuttles engage and disengage the plate by means of solenoid activated pins. By selective engagement and disengagement, the shuttles can move the yarn ends in any desired pattern, forming the desired braid. Control power, and control signals, are transmitted from the electronic interface circuit and host computer, via the braiding surface through electrical contact with the shuttles. Motive power is proved to the shuttles by motion of the shuttle plate, which is passively driven using pneumatic rams. Each shuttle is a simple device that uses only a solenoid to engage the plate and is a simple device that uses only a solenoid to engage the plate and is independently controllable. When compared with each other, the modified Farley braider has the advantage of speed, and the shuttle plate braider the advantage of mechanical control and simplicity.

Huey, Cecil O., Jr.↗
NASA NTRS1991

Biasing errors and corrections

The dependence of laser velocimeter measurement rate on flow velocity is discussed. Investigations outlining that any dependence is purely statistical, and is nonstationary both spatially and temporally, are described. Main conclusions drawn are that the times between successive particle arrivals should be routinely measured and the calculation of the velocity data rate correlation coefficient should be performed to determine if a dependency exists. If none is found, accept the data ensemble as an independent sample of the flow. If a dependency is found, the data should be modified to obtain an independent sample. Universal correcting procedures should never be applied because their underlying assumptions are not valid.

Meyers, James F.↗
NASA NTRS1990

Particle-in-cell simulations of sheath formation around biased interconnectors in a low-earth-orbit plasma

The interaction between satellite solar arrays and the LEO plasma is presently studied with particle-in-cell simulations in which an electrical potential was suddenly applied to the solar cell interconnector. The consequent temporal response was followed for the real O(+)-electron mass ratio in the cases of 100- and 250-V solar cells, various solar cell thicknesses, and solar cells with secondary electron emission. Larger applied potentials and thinner solar cells lead to greater initial polarization surface charges, and therefore longer discharging and shielding times. When secondary electron emission from the cover glass is brought to bear, however, the potential structure is nearly planar, allowing constant interaction between plasma electrons and cover glass; a large fraction of the resulting secondary electrons is collected by the interconnector, constituting an order-of-magnitude increase in collected current.

Thiemann, H.↗
NASA NTRS1989

Analysis of the fetch-related bias in altimeter wind speed measurements

The present interpretation of the radar cross section sigma exp 0 measured by satellite altimeters implies that the rms wave slope gamma is controlled solely by the local wind. However, parameters of wave spectra, including the exponent in the power law for the equilibrium range, depend on sea maturity. The latter is characterized by the nondimensional fetch, x = gX/U-squared. Consequently, gamma and sigma exp 0 are controlled by both U and the wind fetch X. Geosat data for one year are used jointly with in-situ wind and wave observations to assess the fetch-related error trend in altimeter wind speeds. This trend results in overestimated winds in the regions and seasons characterized by a high x, and vice versa. A procedure for wind speed retrieval based on processing sigma exp 0 jointly with the significant wave height information contained in the altimeter wave forms is proposed.

Glazman, Roman E.↗