Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structure prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Protein remote homology detection and structural alignment using deep learning

Exploiting sequence–structure–function relationships in biotechnology requires improved methods for aligning proteins that have low sequence similarity to previously annotated proteins. We develop two deep learning methods to address this gap, TM-Vec and DeepBLAST. TM-Vec allows searching for structure–structure similarities in large sequence databases. It is trained to accurately predict TM-scores as a metric of structural similarity directly from sequence pairs without the need for intermediate computation or solution of structures. Once structurally similar proteins have been identified, DeepBLAST can structurally align proteins using only sequence information by identifying structurally homologous regions between proteins. It outperforms traditional sequence alignment methods and performs similarly to structure-based alignment methods. We show the merits of TM-Vec and DeepBLAST on a variety of datasets, including better identification of remotely homologous proteins compared with state-of-the-art sequence alignment and structure prediction methods.

59 BASIC BIOLOGICAL SCIENCES↗

A comparison of laboratory measured temperatures with predictions for a spar/skin type aircraft structure

A typical spar/skin aircraft structure was heated nonuniformly in a laboratory and the resulting temperatures were measured. The heat transfer NASTRAN computer program was used to provide predictions. Calculated temperatures based on a thermal model with conduction, radiation, and convection features compared closely to measured spar temperatures. Results were obtained without the thermal conductivity, specific heat, or emissivity with temperature. All modes of heat transfer (conduction, radiation, and convection) show to affect the magnitude and distribution of structural temperatures.

Jenkins, J. M.↗

Predicting Energetics Materials’ Crystalline Density from Chemical Structure by Machine Learning

To expedite new molecular compound development, a long-sought goal within the chemistry community has been to predict molecules’ bulk properties of interest a priori to synthesis from a chemical structure alone. In this work, we demonstrate that machine learning methods can indeed be used to directly learn the relationship between chemical structures and bulk crystalline properties of molecules, even in the absence of any crystal structure information or quantum mechanical calculations. We focus specifically on a class of organic compounds categorized as energetic materials called high explosives (HE) and predicting their crystalline density. An ongoing challenge within the chemistry machine learning community is deciding how best to featurize molecules as inputs into machine learning models—whether expert handcrafted features or learned molecular representations via graph-based neural network models—yield better results and why. We evaluate both types of representations in combination with a number of machine learning models to predict the crystalline densities of HE-like molecules curated from the Cambridge Structural Database, and we report the performance and pros and cons of our methods. Our message passing neural network (MPNN) based models with learned molecular representations generally perform best, outperforming current state-of-the-art methods at predicting crystalline density and performing well even when testing on a data set not representative of the training data. However, these models are traditionally considered black boxes and less easily interpretable. Here, to address this common challenge, we also provide a comparison analysis between our MPNN-based model and models with fixed feature representations that provides insights as to what features are learned by the MPNN to accurately predict density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting metal-binding proteins and structures through integration of evolutionary-scale and physics-based modeling

Metals are essential elements in all living organisms, binding to approximately 50% of proteins. They serve to stabilize proteins, catalyze reactions, regulate activities, and fulfill various physiological and pathological functions. While there have been many advancements in determining the structures of protein-metal complexes, numerous metal-binding proteins still need to be identified through computational methods and validated through experiments. Here, to address this need, we have developed the ESMBind workflow, which combines evolutionary scale modeling (ESM) for metal-binding prediction and physics-based protein-metal modeling. Our approach utilizes the ESM-2 and ESM-IF models to predict metal-binding probability at the residue level. In addition, we have designed a metal-placement method and energy minimization technique to generate detailed 3D structures of protein-metal complexes. Our workflow outperforms other models in terms of residue and 3D-level predictions. To demonstrate its effectiveness, we applied the workflow to 142 uncharacterized fungal pathogen proteins and predicted metal-binding proteins involved in fungal infection and virulence.

59 BASIC BIOLOGICAL SCIENCES↗

Transport composite fuselage technology: Impact dynamics and acoustic transmission

A program was performed to develop and demonstrate the impact dynamics and acoustic transmission technology for a composite fuselage which meets the design requirements of a 1990 large transport aircraft without substantial weight and cost penalties. The program developed the analytical methodology for the prediction of acoustic transmission behavior of advanced composite stiffened shell structures. The methodology predicted that the interior noise level in a composite fuselage due to turbulent boundary layer will be less than in a comparable aluminum fuselage. The verification of these analyses will be performed by NASA Langley Research Center using a composite fuselage shell fabricated by filament winding. The program also developed analytical methodology for the prediction of the impact dynamics behavior of lower fuselage structure constructed with composite materials. Development tests were performed to demonstrate that the composite structure designed to the same operating load requirement can have at least the same energy absorption capability as aluminum structure.

Jackson, A. C.↗

Dashboard for Visualizing Molecular Property Prediction Machine Learning Results

This is a dashboard for exploring the results of machine learning models for predicting molecular properties from molecular structure. It includes tools for: 1. Modifying molecules to observe the change in predicted properties 2. Exploring the relationship between molecular structure and predicted properties 3. Recommending structurally similar molecules with improved properties 4. Exploring the impact of data subsampling on model performance metrics

Xu, Audrey↗

Ab initio molecular dynamics calculations on scattering of hyperthermal H atoms from Cu(111) and Au(111)

Energy loss from the translational motion of an atom or molecule impinging on a metal surface to the surface may determine whether the incident particle can trap on the surface, and whether it has enough energy left to react with another molecule present at the surface. Although this is relevant to heterogeneous catalysis, the relative extent to which energy loss of hot atoms takes place to phonons or electron-hole pair (ehp) excitation, and its dependence on the system's parameters, remain largely unknown. We address these questions for two systems that present an extreme case of the mass ratio of the incident atom to the surface atom, i.e., H + Cu(111) and H + Au(111), by presenting adiabatic ab initio molecular dynamics (AIMD) predictions of the energy loss and angular distributions for an incidence energy of 5 eV. The results are compared to the results of AIMDEFp calculations modeling energy loss to ehp excitation using an electronic friction (“EF”) model applied to the AIMD trajectories, so that the energy loss to the electrons is calculated “post” (“p”) the computation of the AIMD trajectory. The AIMD calculations predict average energy losses of 0.38 eV for Cu(111) and 0.13-0.14 eV for Au(111) for H-atoms that scatter from these surfaces without penetrating the surface. These energies closely correspond with energy losses predicted with Baule models, which is suggestive of structure scattering. The predicted adiabatic integral energy loss spectra (integrated over all final scattering angles) all display a lowest energy peak at an energy corresponding to approximately 80% of the average adiabatic energy loss for non-penetrative scattering. In the adiabatic limit, this suggests a way of determining the approximate average energy loss of non-penetratively scattered H-atoms from the integral energy loss spectrum of all scattered H-atoms. The AIMDEFp calculations predict that in each case the lowest energy loss peak should show additional energy loss in the range 0.2-0.3 eV due to ehp excitation, which should be possible to observe. The average non-adiabatic energy losses for non-penetrative scattering exceed the adiabatic losses to phonons by 0.9-1.0 eV. This suggests that for scattering of hyperthermal H-atoms from coinage metals the dominant energy dissipation channel should be to ehp excitation. These predictions can be tested by experiments that combine techniques for generating H-atom beams that are well resolved in translational energy and for detecting the scattered atoms with high energy-resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Review of radiation-induced defects in GaAs

Radiation-resilient optoelectronic materials are highly desired in space and nuclear applications, and understanding the relevant defects and electronic processes in those materials is crucial for both current and next-generation applications. GaAs is a prototypical semiconductor that serves as a foundational system for describing and understanding optoelectronic devices. In this review, both experimental studies and molecular dynamics (MD) simulations of irradiated GaAs are reviewed, with particular emphasis on the deep-level transient spectroscopy, irradiation-induced amorphization zones, and MD predictions of damage structures. The MD results are also compared to predictions of the non-ionized energy-loss model. Recent theoretical studies, in particular, density functional theory based calculations on the simple intrinsic defects and defect clusters in GaAs, are also reviewed. These defects have an important role in dictating the evolution of GaAs in radiation damage environments, as they impact the coupled dynamics of charge carriers. Finally, possible gaps and challenges toward the general understanding of defect evolution in GaAs are discussed.

36 MATERIALS SCIENCE↗

Pressure suppresses the density wave order in kagome metal LuNb 6 ⁢Sn 6

The density waves that develop in kagome metals ScV 6 ⁢Sn 6 and LuNb 6 ⁢Sn 6 at low temperature appear to arise from underfilled atomic columns within a V-Sn or Nb-Sn scaffolding. Compressing this network with applied pressure in ScV 6 ⁢Sn 6 suppressed the structural transition temperature by constraining atomic rattling and inhibiting the shifts that define the structural modulation. We predicted that the density wave transition in LuNb 6⁢ Sn 6 at 68 K would be suppressed by pressure as well. In this Letter, we examine the pressure dependence of the density wave transition by measuring resistance vs temperature up to 2.26 GPa. We found the transition temperature is smoothly depressed and disappears around 1.9 GPa. In conclusion, this result not only addresses our prediction, but strengthens the rattling chains origin of structural instabilities in the HfFe 6⁢ Ge 6 -type kagome metals.

Charge density waves↗

Recrystallization and modification of the stainless-steel surface relief under photonic heat load in powerful plasma discharges

Targets made of ITER-grade 316L(N)-IG stainless steel and Russian-grade 12Cr18Ni10Ti stainless steel with a close composition were exposed at the QSPA-T plasma gun to plasma photonic radiation pulses simulating conditions of disruption mitigation in ITER. After a large number of pulses, modification of the stainless-steel surface was observed, such as the formation of a wavy structure, irregular roughness, and cracks on the target surface. X-ray and optic microscopic analyses of targets revealed changes in the orientation and dimensions of crystallites (grains) over a depth of up to 20 μm for 316L(N)-IG stainless steel after 200 pulses and up to 40 μm for 12Cr18Ni10Ti stainless steel after 50 pulses, which is significantly larger than the depth of the layer melted in one pulse (∼10 μm). In a series of 200 tests of ITER-grade 316L(N)-IG ITER stainless steel, a linear increase in the height of irregularity (roughness) with increasing number of pulses at a rate of up to ∼1 μm per pulse was observed. No alteration in the chemical composition of the stainless-steel surface in the series of tests was revealed. A model is developed that describes the formation of wavy irregularities on the melted metal surface with allowance for the nonlinear stage of instability of the melted layer with a vapor/plasma flow above it. A decisive factor in this case is the viscous flow of the melted metal from the troughs to tops of the wavy structure. The model predicts saturation of the growth of the wavy structure when its amplitude becomes comparable with its wavelength. Approaches to describing the observed stochastic relief and roughness of the stainless-steel surface formed in the series of tests are considered. The recurrence of the melting-solidification process in which mechanisms of the hill growth compete with the spreading of the material from the hills can result in the formation of a stochastic relief.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Assessment of Elastic Modulus vs. Relative Density for Stretch- and Bend-Dominated Lattices

This project was designed to study the possibility of using structural properties of lattices to replicate the material properties of certain hard to manufacture designs and use topology optimization to determine the lattice type and density required to mimic these properties. The integration of additively manufactured lattice structures with topology optimization highlights the need for well characterized mechanical properties and uncertainty analyses to insure these optimized structures respond as predicted. Stereolithographically printed octet and rhombic dodecahedron lattices were manufactured at 10%, 25% and 65% density by volume. As a separate task, yet integrated into this work, finite element analysis (FEA) was used to predict the printed lattice’s mechanical properties, which were then compared to our experimental results. After comparing FEA and experimentallymeasured elastic moduli, it was determined that the FEA provides highly reliable predictions for the modulus of these printed lattice structures. These lattices also exhibited greater tensile stiffness than that of the solid material demonstrating the flexibility that lattices provide to designing parts with designer structural properties. The accurate printing and reliable modeling of these lattices will enable topology optimization of complex parts from well-characterized rhombic dodecahedron and octet lattice structures of varying densities.

36 MATERIALS SCIENCE↗

HITCAN for actively cooled hot-composite thermostructural analysis

A computer code, high temperature composite analyzer (HITCAN), was developed to analyze/design hot metal matrix composite structures. HITCAN is a general purpose code for predicting the global structural and local stress-strain response of multilayered (arbitrarily oriented) metal matrix structures both at the constituent (fiber, matrix, and interphase) and the structural level, including the fabrication process effects. The thermomechanical properties of the constituents are considered to be nonlinearly dependent on several parameters, including temperature, stress, and stress rate. The computational procedure employs an incremental iterative nonlinear approach utilizing a multifactor-interaction material behavior model, i.e., the material properties are expressed in terms of a product of several factors that affect the properties. HITCAN structural analysis capabilities (static, load stepping - a multistep static analysis with material properties updated at each step, modal, and buckling) for cooled hot structures are demonstrated through a specific example problem.

Chamis, C. C.↗

HITCAN for actively cooled hot-composite thermostructural analysis

A computer code, high temperature composite analyzer (HITCAN), was developed to analyze/design hot metal matrix composite structures. HITCAN is a general purpose code for predicting the global structural and local stress-strain response of multilayered (arbitrarily oriented) metal matrix structures both at the constituent (fiber, matrix, and interphase) and the structural level, including the fabrication process effects. The thermomechanical properties of the constituents are considered to be nonlinearly dependent on several parameters, including temperature, stress, and stress rate. The computational procedure employs an incremental iterative nonlinear approach utilizing a multifactor-interaction material behavior model, i.e., the material properties are expressed in terms of a product of several factors that affect the properties. HITCAN structural analysis capabilities (static, load stepping - a multistep static analysis with material properties updated at each step, modal, and buckling) for cooled hot structures are demonstrated through a specific example problem.

Chamis, C. C.↗

Realization of predicted exotic materials: The burden of proof

Trove of exotic topoloid structures has recently been predicted by searching for compounds whose calculated band structure crossing points fulfill specific symmetry requirements. Discovery of exciting physical phenomena by experimental studies of such predicted compounds is just around the corner. Yet, the examination of some of these assumed high-symmetry structures suggests that not always will assembly of atoms in a configuration that yields exotic topological properties be protected against energy-lowering symmetry breaking modes. Indeed, although bulk topological characteristics lead to protected surface/edge states, nothing protects bulk states from structural instability. The burden of proof for theoretical predictions of exciting physical phenomena should include some compelling hints that such phenomena can live in thermodynamically stable (or near stable) compounds. Here, we illustrate how the use of the calculated total (electron + ion) energies of candidate structures can remove false-positive predicted topoloids from the list of likely realizable compounds, to the benefit of the much-cherished iterative process of theory-experiment materials discovery.

36 MATERIALS SCIENCE↗

From Structure to Functions: Metagenomics-Enabled Predictive Understanding of Soil Microbial Feedbacks to Climate Change

Understanding the responses, adaptations and feedback mechanisms of biological communities to climate change is critical to project future states of earth and climate systems. Although a significant amount of knowledge is available on the feedbacks of aboveground communities to climate change, the responses of belowground microbial communities are still poorly understood. This is due to challenges in analyzing soil microbial communities in terms of their diversity, structure and function. Thus, the ultimate goal of this study is to advance system-level predictive understanding of the feedbacks of belowground microbial communities to multiple climate change factors and their impacts on soil carbon (C) cycling processes. For this, cutting-edge integrated metagenomic technologies are employed to establish mechanistic linkages among aboveground plant communities, belowground microbial communities, ecosystem processes and functions and climate change. Towards this goal, the following four specific objectives are pursued: (i) To determine the responses of microbial community structure, functions and activities to climate warming, altered precipitation, soil moisture regime and/or clipping in the tundra and temperate grassland ecosystems; (ii) To determine the temperature sensitivity and the effect of substrate priming on recalcitrant C decomposition; (iii) To determine microbiological bases underlying temperature sensitivity of recalcitrant C decomposition; and (iv) To develop integrated bioinformatics and modeling approaches to scale information across different organizational levels towards predictive understanding of ecosystem responses to multiple climate change factors in collaboration with the Knowledge Base (KBase) and integrated into their database. Warming experiments in an Alaskan tundra permafrost soil (AK) as well as an Oklahoma temperate grassland soil (OK) provide a more complete picture of the effects of warming on belowground microbial communities of different (key) soil ecosystems. Numerous research activities have been carried out by the institutions under the support of this program. For brevity, a few key results and their significance are highlighted in this report.

54 ENVIRONMENTAL SCIENCES↗

Machine Learning for Predicting Multipactor Susceptibility in Planar RF Structures

Multipactor discharge is a persistent challenge in high-power microwave (HPM) and accelerator systems, where secondary electron avalanches can cause heating, vacuum degradation, and failure. This work presents the first supervised machine learning (ML) framework for multipactor prediction, trained on high-fidelity 3D Particle-in-Cell (PIC) simulation data in planar geometries. The model maps operational, geometric, and material-dependent secondary electron yield (SEY) parameters to the time-averaged electron growth rate, enabling rapid reconstruction of susceptibility charts. Among the models evaluated, tree-based ensemble methods such as Random Forest and Extra Trees demonstrate superior generalization to unseen materials compared to neural networks such as multilayer perceptron (MLP). Performance metrics, including Intersection over Union (IoU), Structural Similarity Index Measure (SSIM), and Pearson correlation, show close agreement with simulation benchmarks. Principal Component Analysis attributes generalization limits to material feature-space disjointedness.

43 PARTICLE ACCELERATORS↗

Mutational analysis of three predicted 5'-proximal stem-loop structures in the genome of tick-borne encephalitis virus indicates different roles in RNA replication and translation

Flavivirus gene expression is modulated by RNA secondary structure elements at the terminal ends of the viral RNA molecule. For tick-borne encephalitis virus (TBEV), four stem-loop (SL) elements have been predicted in the first 180 nucleotides of the viral genome: 5'-SL1, 5'-SL2, 5'-SL3 and 5'-SL4. The last three of these appear to be unique to tick-borne flaviviruses. Here, we report their characterization by mutagenesis in a TBEV luciferase reporter system. By manipulating their thermodynamic properties, we found that an optimal stability of the 5'-SL2 is required for efficient RNA replication. 5'-SL3 formation is also important for viral RNA replication, but although it contains the viral start codon, its formation is dispensable for RNA translation. 5'-SL4 appears to facilitate both RNA translation and replication. Our data suggest that maintenance of the balanced thermodynamic stability of these SL elements is important for temporal regulation of its different functions.

60 APPLIED LIFE SCIENCES↗