Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Five-volt-class high-capacity all-solid-state lithium batteries

Advances in battery technology have been impeded by the voltage constraints of electrolytes. Here, in this study, we present a high-energy all-solid-state battery design featuring >5 V operation and an ultrahigh areal capacity of 35.3 mAh cm −2 ; these attributes were enabled by a highly conductive and ultrahigh-voltage stable fluoride solid electrolyte, LiCl–4Li 2 TiF 6 (1.7 × 10 −5 S cm −1 at 30 °C). LiCl–4Li 2 TiF 6 shields high-voltage spinel oxide cathodes, achieving 106 mAh g −1 at 2C with 75.2% retention over 500 cycles for LiNi 0.5 Mn 1.5 O 4 , sharply contrasting with the conventional LiNbO 3 counterpart, which decomposes and fails to prevent detrimental interfacial degradation. The efficacy of LiCl–4Li 2 TiF 6 is validated across various systems, including LiCoMnO 4 , LiFe 0.5 Mn 1.5 O 4 and pouch-type LiNi 0.5 Mn 1.5 O 4 ||Li (or Ag–C) all-solid-state batteries, and further demonstrated by operability down to 2.3 V with 258 mAh g −1 and ultrathick 1.8-mm electrodes. This shielding layer with >5 V stability introduces a transformative design paradigm by revisiting the previously forbidden high-voltage cathodes.

36 MATERIALS SCIENCE↗

Direct observations of transient weakening during phase transformations in quartz and olivine

Phase transformations are widely invoked as a source of rheological weakening during subduction, continental collision, mantle convection and various other geodynamic phenomena. However, despite more than half a century of research, the likelihood and magnitude of such weakening in nature remain poorly constrained. Here we use experiments performed on a synchrotron beamline to reveal transient weakening of up to three orders of magnitude during the polymorphic quartz to coesite (SiO 2 ) and olivine to ringwoodite (Fe 2 SiO 4 ) phase transitions. Weakening becomes increasingly prominent as the transformation outpaces deformation. We suggest that this behaviour is broadly applicable among silicate minerals undergoing first-order phase transitions and examine the likelihood of weakening due to the olivine-spinel, (Mg,Fe) 2 SiO 4 , transformation during subduction. Modelling suggests that cold, wet slabs are most susceptible to transformational weakening, consistent with geophysical observations of slab stagnation in the mantle transition zone beneath the western Pacific. In conclusion, our study highlights the importance of incorporating transformational weakening into geodynamic simulations and provides a quantitative basis for doing so.

Cross, Andrew J. [Woods Hole Oceanographic Institu↗

Unlocking Li superionic conductivity in face-centred cubic oxides via face-sharing configurations

Oxides with a face-centred cubic (fcc) anion sublattice are generally not considered as solid-state electrolytes as the structural framework is thought to be unfavourable for lithium (Li) superionic conduction. Here we demonstrate Li superionic conductivity in fcc-type oxides in which face-sharing Li configurations have been created through cation over-stoichiometry in rocksalt-type lattices via excess Li. We find that the face-sharing Li configurations create a novel spinel with unconventional stoichiometry and raise the energy of Li, thereby promoting fast Li-ion conduction. The over-stoichiometric Li–In–Sn–O compound exhibits a total Li superionic conductivity of 3.38 × 10 -4 S cm -1 at room temperature with a low migration barrier of 255 meV. Our work unlocks the potential of designing Li superionic conductors in a prototypical structural framework with vast chemical flexibility, providing fertile ground for discovering new solid-state electrolytes.

36 MATERIALS SCIENCE↗

Controlled Phase and Tunable Magnetism in Ordered Iron Oxide Nanotube Arrays Prepared by Atomic Layer Deposition

Highly-ordered and conformal iron oxide nanotube arrays on an atomic scale are successfully prepared by atomic layer deposition (ALD) with controlled oxidization states and tunable magnetic properties between superparamagnetism and ferrimagnetism. Non-magnetic α-Fe 2 O 3 and superparamagnetic Fe 2 O 3 with a blocking temperature of 120 K are in-situ obtained by finely controlling the oxidation reaction. Both of them exhibit a very small grain size of only several nanometers due to the nature of atom-by-atom growth of the ALD technique. Post-annealing α-Fe 2 O 3 in a reducing atmosphere leads to the formation of the spinel Fe 3 O 4 phase which displays a distinct ferrimagnetic anisotropy and the Verwey metal-insulator transition that usually takes place only in single crystal magnetite or thick epitaxial films at low temperatures. Finally, the ALD deposition of iron oxide with well-controlled phase and tunable magnetism demonstrated in this work provides a promising opportunity for the fabrication of 3D nano-devices to be used in catalysis, spintronics, microelectronics, data storages and bio-applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modification of Ni-Rich FCG NMC and NCA Cathodes by Atomic Layer Deposition: Preventing Surface Phase Transitions for High-Voltage Lithium-Ion Batteries

The energy density of current lithium-ion batteries (LIBs) based on layered LiMO 2 cathodes (M=Ni, Mn, Co: NMC; M=Ni, Co, Al: NCA) needs to be improved significantly in order to compete with internal combustion engines and allow for widespread implementation of electric vehicles (EVs). In this report, we show that atomic layer deposition (ALD) of titania (TiO 2 ) and alumina (Al 2 O 3 ) on Ni-rich FCG NMC and NCA active material particles could substantially improve LIB performance and allow for increased upper cutoff voltage (UCV) during charging, which delivers significantly increased specific energy utilization. Our results show that Al2O3 coating improved the NMC cycling performance by 40% and the NCA cycling performance by 34% at 1C/₋1C with respectively 4.35V and 4.4V UCV in 2Ah pouch cells. High resolution TEM/SAED structural characterization revealed that Al 2 O 3 coatings prevented surface-initiated layered-to-spinel phase transitions in coated materials which were prevalent in uncoated materials. Lastly, EIS confirmed that Al 2 O 3 -coated materials had significantly lower increase in the charge transfer component of impedance during cycling. In conclusion, the ability to mitigate degradation mechanisms for Ni-rich NMC and NCA illustrated in this report provides insight into a method to enable the performance of high-voltage LIBs.

25 ENERGY STORAGE↗

Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study

High voltage cathode materials Li-excess layered oxide compounds Li[Ni{sub x}Li{sub 1/3-2x/3}Mn{sub 2/3-x/3}]O{sub 2} (0 < x < 1/2) are investigated in a joint study combining both computational and experimental methods. The bulk and surface structures of pristine and cycled samples of Li[Ni{sub 1/5}Li{sub 1/5}Mn{sub 3/5}]O{sub 2} are characterized by synchrotron X-Ray diffraction together with aberration corrected Scanning Transmission Electron Microscopy (a-S/TEM). Electron Energy Loss Spectroscopy (EELS) is carried out to investigate the surface changes of the samples before/after electrochemical cycling. Combining first principles computational investigation with our experimental observations, a detailed lithium de-intercalation mechanism is proposed for this family of Li-excess layered oxides. The most striking characteristics in these high voltage high energy density cathode materials are (1) formation of tetrahedral lithium ions at voltage less than 4.45 V and (2) the transition metal (TM) ions migration leading to phase transformation on the surface of the materials. We show clear evidence of a new spinel-like solid phase formed on the surface of the electrode materials after high-voltage cycling. It is proposed that such surface phase transformation is one of the factors contributing to the first cycle irreversible capacity and the main reason for the intrinsic poor rate capability of these materials.

74 ATOMIC AND MOLECULAR PHYSICS↗

A Review and Perspective of Recent Bio-Oil Hydrotreating Research

The pathway for catalytic hydrodeoxygenation of biomass derived fast pyrolysis oil represents a compelling route for production of liquid transportation fuels. There has been continued progress and advancements in both the public and private research areas towards driving this technology to completion. Published research and patent literature have demonstrated that continued development of HDO as a part of a processes for production liquid transportation using biomass is being advanced for both fuel blend stocks and for refinery intermediates for co-processing. Much of the research has still focused on “quality” metrics around single or groups of unit operations generating partially treated bio-oil streams without assessing upstream and downstream implications. However, there is an encouraging amount of research that is now being targeted and assessed with attempts to understand the impact on the final fuel product, regardless of the route. Much of the most important research is moving towards continuous, industrially relevant processes where data can be generated to adequately inform process and economic modeling. As the technology for producing liquid transportation fuels from pyrolysis/HDO/coprocessing is driving towards commercialization, further research should be prioritized on the basis of impact to a techno-economic analyses.

bio-oil↗

Morphology- and lattice stability-dependent performance of nanostructured Li 4 Ti 5 O 12 probed by in situ high-pressure Raman spectroscopy and synchrotron X-ray diffraction

Nanostructured Li 4 Ti 5 O 12 (LTO) as a promising anode material in lithium-ion batteries (LIBs) has shown excellent yet morphology-dependent performance in LIB operations. However, the structural origin that influences the material performance at the microscopic level remains unclear. In this work, using combined in situ Raman spectroscopy and synchrotron X-ray diffraction, we comparatively investigated the structural stability of two nanostructured LTO materials with different morphologies by application of external pressure up to 27 GPa. In particular, nanoflower-like Li 4 Ti 5 O 12 spheres (LTO-1) and Li 4 Ti 5 O 12 nanoparticles (LTO-2) were subjected to high pressures using diamond anvil cells and their structural evolutions were characterized upon compression and decompression. Raman measurements show that both LTO materials undergo pressure-induced structural disorder but with different reversibilities upon decompression. X-ray results further confirmed the Raman measurements, and also allowed the quantitative analysis of pressure dependence of the crystal structures. Structural refinements of the diffraction patterns yield morphology-dependent bulk moduli of the two LTO materials, which reveal critical information about the intrinsic lattice strain and vacancies. These different structural characteristics, when compared with another spinel structure of lithiated titanium dioxide, allow the interpretation of the different performance between LTO-1 and LTO-2 for LIB operations. This study thus contributes to the understanding of the important factors that may influence the electrochemical performance and help with the design of new LTO-based anode materials for LIBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into dynamic processes of cations in pyrochlores and other complex oxides

Complex oxides are critical components of many key technologies, from solid oxide fuel cells and superionics to inert matrix fuels and nuclear waste forms. In many cases, understanding mass transport is important for predicting performance and, thus, extensive effort has been devoted to understanding mass transport in these materials. However, most work has focused on the behavior of oxygen while cation transport has received relatively little attention, even though cation diffusion is responsible for many phenomena, including sintering, radiation damage evolution, and deformation processes. Here, we use accelerated molecular dynamics simulations to examine the kinetics of cation defects in one class of complex oxides, A₂B₂O₇ pyrochlore. In some pyrochlore chemistries, B cation defects are kinetically unstable, transforming to A cation defects and antisites at rates faster than they can diffuse. When this occurs, transport of B cations occurs through defect processes on the A sublattice. Further, these A cation defects, either interstitials or vacancies, can interact with antisite disorder, reordering the material locally, though this process is much more efficient for interstitials than vacancies. Whether this behavior occurs in a given pyrochlore depends on the A and B chemistry. Pyrochlores with a smaller ratio of cation radii exhibit this complex behavior, while those with larger ratios exhibit direct migration of B interstitials. Similar behavior has been reported in other complex oxides such as spinels and perovskites, suggesting that this coupling of transport between the A and B cation sublattices, while not universal, occurs in many complex oxide.

36 MATERIALS SCIENCE↗

The migration mechanism of transition metal ions in LiNi 0.5 Mn 1.5 O 4

The migration of transition metal ions in the oxygen framework was recently proposed to be responsible for the continuous loss of average working potential of high energy density layered–layered composite cathodes for lithium-ion batteries. The potential migration pathway in a model material, LiNi 0.5 Mn 1.5 O 4 spinel, was investigated using in situ high-energy X-ray diffraction and in situ neutron diffraction during the solid state synthesis process. It was found that the migration of transition metal ions among octahedral sites is possible by using tetrahedral vacancies as intermediate sites. It was also suggested that the number of electrons in 3d orbitals has a significant impact on their mobility in the hosting oxygen framework.

25 ENERGY STORAGE↗

High rate sodium ion battery anodes from block copolymer templated mesoporous nickel–cobalt carbonates and oxides

In this work, micelle-templated ordered mesoporous nickel–cobalt carbonates and oxides are fabricated using a metal nitrate–citric acid strategy, which avoids the hydrolysis and aging requirements associated with sol–gel chemistry. A series of mesoporous Ni x Co (3– x ) (CO 3 ) y and Ni x Co (3– x ) O 4 films with varying Ni–Co compositions and 14 ± 4 nm mesopores are fabricated with the same block copolymer template. AFM and GISAXS analysis indicates that the mesostructure is maintained through the formation of the carbonate and oxide, while GIXD profiles confirm formation of pure spinel phases of semi-crystalline Ni x Co (3– x ) O 4 . The micelle templated mesopores are interconnected and provide transport paths for the electrolyte to minimize the solid-state diffusion requirements associated with battery electrodes. These materials exhibit good performance as sodium ion battery anodes even at high current densities of 4 A g –1 . Amongst the mixed-metal oxides, Ni 2 CoO 4 exhibits the highest specific capacity of 239 mA h g –1 after galvanostatic cycling at a current density of 1 A g –1 for 10 cycles. We attribute the superior performance of Ni 2 CoO 4 at high rates to the high surface area and short ion-diffusion paths of the nanoporous anode architecture, while the higher nickel content in the mixed metal oxide provides enhanced stability during oxide formation along with enhanced electronic conductivity, leading to improved cycling stability of the anode. This micelle template metal nitrate–citric acid method enables new possibilities for fabricating variety of ordered mesoporous mixed-metal carbonates and oxides that could be used in a wide range of applications.

25 ENERGY STORAGE↗

Imaging the surface morphology, chemistry and conductivity of LiNi 1/3 Fe 1/3 Mn 4/3 O 4 crystalline facets using scanning transmission X-ray microscopy

We have employed scanning transmission X-ray microscopy (STXM) using the X-ray fluorescence mode in order to elucidate the chemical structures at Ni, Fe, Mn and O sites from the (111) and (100) facets of micron-sized LiNi 1/3 Fe 1/3 Mn 4/3 O 4 energy material particles. Furthermore, STXM imaging using electron yield mode has mapped out the surface conductivity of the crystalline particles. Our study presents a novel approach that visualizes local element segregation, chemistry and conductivity variation among different crystal facets, which will assist further tailoring of the morphology and surface structure of this high voltage spinel lithium ion battery cathode material.

25 ENERGY STORAGE↗

The effects of cation–anion clustering on defect migration in MgAl 2 O 4

Magnesium aluminate spinel (MgAl 2 O 4 ), like many other ceramic materials, offers a range of technological applications, from nuclear reactor materials to military body armor. For many of these applications, it is critical to understand both the formation and evolution of lattice defects throughout the lifetime of the material. We use the Speculatively Parallel Temperature Accelerated Dynamics (SpecTAD) method to investigate the effects of di-vacancy and di-interstitial formation on the mobility of the component defects. From long-time trajectories of the state-to-state dynamics, we characterize the migration pathways of defect clusters, and calculate their self-diffusion constants across a range of temperatures. We find that the clustering of Al and O vacancies drastically reduces the mobility of both defects, while the clustering of Mg and O vacancies completely immobilizes them. For interstitials, we find that the clustering of Mg and O defects greatly reduces O interstitial mobility, but has only a weak effect on Mg. Lastly, these findings illuminate important new details regarding defect kinetics relevant to the application of MgAl 2 O 4 in extreme environments.

36 MATERIALS SCIENCE↗

High-voltage positive electrode materials for lithium-ion batteries

The ever-growing demand for advanced rechargeable lithium-ion batteries in portable electronics and electric vehicles has spurred intensive research efforts over the past decade. The key to sustaining the progress in Li-ion batteries lies in the quest for safe, low-cost positive electrode (cathode) materials with desirable energy and power capabilities. One approach to boost the energy and power densities of batteries is to increase the output voltage while maintaining a high capacity, fast charge–discharge rate, and long service life. Here, this review gives an account of the various emerging high-voltage positive electrode materials that have the potential to satisfy these requirements either in the short or long term, including nickel-rich layered oxides, lithium-rich layered oxides, high-voltage spinel oxides, and high-voltage polyanionic compounds. The key barriers and the corresponding strategies for the practical viability of these cathode materials are discussed along with the optimization of electrolytes and other cell components, with a particular emphasis on recent advances in the literature. Finally, a concise perspective with respect to plausible strategies for future developments in the field is also provided.

25 ENERGY STORAGE↗

RedOx-controlled sorption of iodine anions by hydrotalcite composites

The radioactive contaminant iodine-129 (I-129) is one of the top risk drivers at radiological waste disposal and contaminated groundwater sites where nuclear material fabrication or reprocessing has occurred. Currently there are very few options available to treat I-129 in the groundwater, which is partially related to its complex biogeochemical behavior in the subsurface and occurrence in the multiple chemical forms. We hypothesize that layered hydrotalcite materials containing redox active transition metal ions offer a potential solution, benefiting from the simultaneous adsorption of iodate (IO3-) and iodide (I-) anions, which exhibit different electronic and structural properties and therefore may require dissimilar hosts. To test this hypothesis, Cr3+- based materials were selected based on the rationale that Cr3+ readily reduces IO3- in solution. It was combined with either redox-active Co2+ or redox-inactive Ni2+ so that two model materials were prepared by hydrothermal synthesis including Co2+-Cr3+ and Ni2+-Cr3+(M-Cr). Obtained M-Cr materials comprised of Co2+-Cr3+ or Ni2+-Cr3+ layered hydrotalcite and small fractions of Co3O4 spinel or Ni(OH)2 theophrastite phases were structurally characterized before and after uptake of periodate (IO4-), IO3-, and I- anions. It was found that the IO3- uptake is driven by its chemical reduction to I2 and I-. Interestingly, in the Co2+-Cr3+ hydrotalcite, Co2+ and not Cr3+ serves as a reductant while in the Ni2+-Cr3+ hydrotalcite Cr3+ is responsible for the reduction of IO3-. A different uptake mechanism was identified for the IO4- anion. The Co2+-Cr3+ hydrotalcite phase efficiently uptakes IO4- by a diffusion-limited ion exchange mechanism and is not accompanied by the redox process, while Cr3+ in the Ni2+-Cr3+ hydrotalcite reduces IO4- to IO3-, I2 and I-. Iodide exhibited high affinity only to the Co-Cr material. The Co-Cr material performed remarkably well for the removal of IO3-, I- and total iodine from the groundwater collected from the US DOE Hanford site, WA, USA outperforming non-redox active hydrotalcites (e.g., Mg2+-Al3+) reported previously. This work demonstrates that redox-controlled sorption can be a highly effective method for the treatment of anions based on elements with mobile oxidation states. Further, multiple anions of interest could be simultaneously removed through combination of approaches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗