Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Electrochemical Assay of Gold-Plating Solutions

Gold content of plating solution is assayed by simple method that required only ordinary electrochemical laboratory equipment and materials. Technique involves electrodeposition of gold from solution onto electrode, the weight gain of which is measured. Suitable fast assay methods are economically and practically necessary in electronics and decorative-plating industries. If gold content in plating bath is too low, poor plating may result, with consequent economic loss to user.

Chiodo, R.↗
NASA NTRS1982

Monitoring Crystal Growth From Solution

Experimental system for monitoring growth of triglycine sulfate (TGS) crystals from solution is being studied. System consists of outer cell containing distilled water heated and stirred to maintain constant temperature to within plus or minus 0.1 degrees C, inner (growth) cell containing supersaturated solution of TGS, and seed crystal mounted in plastic-covered stainless-steel sting equiped with controlled cooling mechanism and temperature sensors.

Lal, R. B.↗
NASA NTRS1980

A solution of one dimensional Fredholm integral equations of the second kind

Fredholm integral equations of the second kind of the one dimension are numerically solved. It is proven that the numerical solution converges to the exact solution of the integral equation. This is shown for periodic kernels and then extended to nonperiodic kernels. This development helps delineate a basic theory which has the potential of solving very complex problems.

Gabrielsen, R. E.↗
NASA NTRS1980

An adaptive computation mesh for the solution of singular perturbation problems

In singular perturbation problems, control of zone size variation can affect the effort required to obtain accurate, numerical solutions of finite difference equations. The mesh is generated by the solution of potential equations. Numerical results for a singular perturbation problem in two dimensions are presented. The mesh was used in calculations of resistive magnetohydrodynamic flow in two dimensions.

Brackbill, J. U.↗
NASA NTRS1980

Nonlinear grid error effects on numerical solution of partial differential equations

Finite difference solutions of nonlinear partial differential equations require discretizations and consequently grid errors are generated. These errors strongly affect stability and convergence properties of difference models. Previously such errors were analyzed by linearizing the difference equations for solutions. Properties of mappings of decadence were used to analyze nonlinear instabilities. Such an analysis is directly affected by initial/boundary conditions. An algorithm was developed, applied to nonlinear Burgers equations, and verified computationally. A preliminary test shows that Navier-Stokes equations may be treated similarly.

Dey, S. K.↗
NASA NTRS1981

Full potential solution of transonic quasi-3-D flow through a cascade using artificial compressability

The three-dimensional flow in a turbomachinery blade row was approximated by correcting for streamtube convergence and radius change in the throughflow direction. The method is a fully conservative solution of the full potential equation incorporating the finite volume technique on body fitted periodic mesh, with an artificial density imposed in the transonic region to insure stability and the capture of shock waves. Comparison of results for several supercritical blades shows good agreement with their hodograph solutions. Other calculations for these profiles as well as standard NACA blade sections indicate that this is a useful scheme analyzing both the design and off-design performance of turbomachinery blading.

Farrell, C.↗
NASA NTRS1981

A study of crystal growth by solution technique

The mechanism of crystal growth by solution technique was studied. A low temperature solution crystal growth setup was developed. Crystals of triglycine sulfate (TGS) were grown using this arrangement. Some additional tasks were performed toward fabrication of experiments for future space flight.

Lal, R. B.↗
NASA NTRS1980

On the existence, uniqueness, and asymptotic normality of a consistent solution of the likelihood equations for nonidentically distributed observations: Applications to missing data problems

A general theorem is given which establishes the existence and uniqueness of a consistent solution of the likelihood equations given a sequence of independent random vectors whose distributions are not identical but have the same parameter set. In addition, it is shown that the consistent solution is a MLE and that it is asymptotically normal and efficient. Two applications are discussed: one in which independent observations of a normal random vector have missing components, and the other in which the parameters in a mixture from an exponential family are estimated using independent homogeneous sample blocks of different sizes.

Peters, C.↗
NASA NTRS1981

Two-boundary grid generation for the solution of the three dimensional compressible Navier-Stokes equations

A grid generation technique called the two boundary technique is developed and applied for the solution of the three dimensional Navier-Stokes equations. The Navier-Stokes equations are transformed from a cartesian coordinate system to a computational coordinate system, and the grid generation technique provides the Jacobian matrix describing the transformation. The two boundary technique is based on algebraically defining two distinct boundaries of a flow domain and the distribution of the grid is achieved by applying functions to the uniform computational grid which redistribute the computational independent variables and consequently concentrate or disperse the grid points in the physical domain. The Navier-Stokes equations are solved using a MacCormack time-split technique. Grids and supersonic laminar flow solutions are obtained for a family of three dimensional corners and two spike-nosed bodies.

Smith, R. E.↗
NASA NTRS1981

Influence of exit impedance on finite difference solutions of transient acoustic mode propagation in ducts

The time-dependent governing acoustic-difference equations and boundary conditions are developed and solved for sound propagation in an axisymmetric (cylindrical) hard-wall duct without flow and with spinning acoustic modes. The analysis begins with a harmonic sound source radiating into a quiescent duct. This explicit iteration method then calculates stepwise in real time to obtain the steady solutions of the acoustic field. The transient method did not converge to the steady-state solution for cutoff acoustic duct modes. This has implications as to its use in a variable-area duct, where modes may become cutoff in the smal-area portion of the duct. For single cutoff mode propagation the steady-state impedance boundary condition produced acoustic reflections during the initial transient that caused finite instabilities in the numerical calculations. The stability problem is resolved by reformulating the exit boundary condition. Example calculations show good agreement with exact analytical and numerical results for forcing frequencies above, below, and nearly at the cutoff frequency.

Baumeister, K. J.↗
NASA NTRS1981

Multigrid solution of the Navier-Stokes equations on nonuniform grids

The numerical solution of the Navier-Stokes equations in general two dimensional domains is considered. A proper finite difference approximation to the governing equations, on nonstaggered grids, in a transformed plane is formulated. Several aspects of a multigrid method for the solution of the finite difference equations are described. The efficiency of some relaxation schemes and the transfer among the grids which are nonuniform in the physical plane are emphasized.

Fuchs, L.↗
NASA NTRS1980

Solutions of the equation of heat flow

The geometry of sunspots has been used to suggest a problem in heat flow. The equation of heat transport is solved for the case of a cylinder with a given thermal conductivity imbedded in an otherwise uniform medium with different conductivity. The surface of this region radiates heat with flux proportional to temperature. At a lower surface, either in heat flux or temperature is held constant. The cylinder can have an anisotropic thermal conductivity. The variations in temperature along the radiating surface have been determined. A simple approximation is noted which has been found to give a general solution with acceptable accuracy. This method may be of some use in other situations requiring the solution of Laplace's equation with a free surface. The analysis is used to set limits on the ratio of diameter to depth for cases which preserve the sharp surface temperature transition across the cylinder.

Margolis, S. H.↗
NASA NTRS1980

Comparison of two leading uniform theories of edge diffraction with the exact uniform asymptotic solution

The diffraction of an arbitrary cylindrical wave by a half-plane has been treated by Rahmat-Samii and Mittra who used a spectral domain approach. In this paper, their exact solution for the total field is expressed in terms of a new integral representation. For large wave number k, two rigorous procedures are described for the exact uniform asymptotic expansion of the total field solution. The uniform expansions obtained are valid in the entire space, including transition regions around the shadow boundaries. The final results are compared with the formulations of two leading uniform theories of edge diffraction, namely, the uniform asymptotic theory and the uniform theory of diffraction. Some unique observations and conclusions are made in relating the two theories.

Boersma, J.↗
NASA NTRS1981

Application of adaptive grids to fluid-flow problems with asymptotic solutions

Coordinate system selection is an important consideration in the asymptotic numerical solution of any fluid-flow or heat transfer problem. This paper uses a new technique that provides a simple way of moving the mesh points in physical space in order to reduce the error in the computed asymptotic solution relative to that obtained using a fixed mesh. Applications to fluid-flow problems are presented, including boundary layer flow and inviscid supersonic flow over cylinders, and wedges with associated detached shocks. The treatment of curved boundaries, stationary and nonstationary boundaries, and systems of PDE's is discussed. Significant error reductions are demonstrated.

Rai, M. M.↗
NASA NTRS1981

Sensitivity of optimum solutions to problem parameters

In an aircraft configuration optimization, the information of interest is the sensitivity of optimal block fuel consumption and wing aspect ratio and area, to variations of required range and payload. The objectives of this study are: (1) to show how the equations capable of yielding the sensitivity derivatives (the sensitivity equations) can be obtained for a constrained optimum regardless of the type of optimization algorithm that was used to arrive at the optimum point, (2) to review the solvability of the sensitivity equations and (3) to report on applications on structural optimization. Numerical examples, which demonstrate the sensitivity analysis, include a tubular column and a three-bar truss for which closed form solutions are obtained, a ten-bar truss that requires the use of a finite element analysis, and a thin-walled beam characterized by strongly nonlinear constraints for local buckling. It is concluded that a practically significant extrapolation accuracy may be obtained for a reasonably broad range of parameter changes; and that accuracy does not depend strongly on the degree of convergence of the optimum solution from which the sensitivity derivatives are obtained.

Sobieszczanski-Sobieski, J.↗
NASA NTRS1981

Optimality criteria solution strategies in multiple constraint design optimization

Procedures and solution strategies are described to solve the conventional structural optimization problem using the Lagrange multiplier technique. The multipliers, obtained through solution of an auxiliary nonlinear optimization problem, lead to optimality criteria to determine the design variables. It is shown that this procedure is essentially equivalent to an alternative formulation using a dual method Lagrangian function objective. Although mathematical formulations are straight-forward, successful applications and computational efficiency depend upon execution procedure strategies. Strategies examined, with application examples, include selection of active constraints, move limits, line search procedures, and side constraint boundaries.

Levy, R.↗
NASA NTRS1981

Full potential solution of a transonic quasi-3-D flow through a cascade using artificial compressibility

A reliable method is presented for calculating the flowfield about a cascade of arbitrary 2-D airfoils. The method approximates the three-dimensional flow in a turbomachinery blade row by correcting for streamtube convergence and radius change in the throughflow direction. The method is a fully conservative solution of the full potential equation incorporating the finite volume technique on a body-fitted periodic mesh, with an artificial density imposed in the transonic region to ensure stability and the capture of shock waves. Comparison of results for several supercritical blades shows good agreement with their hodograph solutions. Other calculations for these profiles as well as standard NACA blade sections indicate that this is a useful scheme for analyzing both the design and off-design performance of turbomachinery blading.

Farrell, C.↗
NASA NTRS1980

Asymptotic solution for the reflectivity of a very rough surface

Asymptotic solutions for the reflectivity of a very rough surface are obtained in closed form up to second order in variance of slope. The zeroth-order solution gives the reflectivity of a specular surface and the sum of the higher-order terms yields the net effect of the rough surface. Within the common regions of validity of small rms slope and incident angle not close to grazing, the result agrees very well with those obtained with numerical methods.

Tsang, L.↗