Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Signal Detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Pinning down inelastic dark matter in the Sun and in direct detection

We study the solar capture rate of inelastic dark matter with endothermic and/or exothermic interactions. By assuming that an inelastic dark matter signal will be observed in next generation direct detection experiments we can set a lower bound on the capture rate that is independent of the local dark matter density, the velocity distribution, the galactic escape velocity as well as the scattering cross section. In combination with upper limits from neutrino observatories we can place upper bounds on the annihilation channels leading to neutrinos. We find that, while endothermic scattering limits are weak in the isospin-conserving case, strong bounds may be set for exothermic interactions, in particular in the spin-dependent case. Furthermore, we study the implications of observing two direct detection signals, in which case one can halo-independently obtain the dark matter mass and the mass splitting, and disentangle the endothermic/exothermic nature of the scattering. Finally we discuss isospin violation.

79 ASTRONOMY AND ASTROPHYSICS↗

Signal averaging limitations in heterodyne- and direct-detection laser remote sensing measurements

The improvement in measurement uncertainty brought about by the averaging of increasing numbers of pulse return signals in both heterodyne- and direct-detection lidar systems is investigated. A theoretical analysis is presented which shows the standard deviation of the mean measurement to decrease as the inverse square root of the number of measurements, except in the presence of temporal correlation. Experimental measurements based on a dual-hybrid-TEA CO2 laser differential absorption lidar system are reported which demonstrate that the actual reduction in the standard deviation of the mean in both heterodyne- and direct-detection systems is much slower than the inverse square-root dependence predicted for uncorrelated signals, but is in agreement with predictions in the event of temporal correlation. Results thus favor the use of direct detection at relatively short range where the lower limit of the standard deviation of the mean is about 2 percent, but advantages of heterodyne detection at longer ranges are noted.

Menyuk, N.↗

Detection of early-universe gravitational-wave signatures and fundamental physics

Detection of a gravitational-wave signal of non-astrophysical origin would be a landmark discovery, potentially providing a significant clue to some of our most basic, big-picture scientific questions about the Universe. In this white paper, we survey the leading early-Universe mechanisms that may produce a detectable signal—including inflation, phase transitions, topological defects, as well as primordial black holes—and highlight the connections to fundamental physics. We review the complementarity with collider searches for new physics, and multimessenger probes of the large-scale structure of the Universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Seismoacoustic Signatures Observed During a Long-Term Deployment of Infrasound Sensors at the Nevada National Security Site

Earthquakes have repeatedly been shown to produce inaudible acoustic signals (<20 Hz), otherwise known as infrasound. These signals can propagate hundreds to thousands of kilometers and still be detected by ground-based infrasound arrays depending on the source strength, distance between source and receiver, and atmospheric conditions. Another type of signal arrival at infrasound arrays is the seismic induced motion of the sensor itself, or ground-motion-induced sensor noise. Measured acoustic and seismic waves produced by earthquakes can provide insight into properties of the earthquake such as magnitude, depth, and focal mechanism, as well as information about the local lithology and atmospheric conditions. Large earthquakes that produce strong acoustic signals detected at distances greater than 100 km are the most commonly studied; however, more recent studies have found that smaller magnitude earthquakes ($M$ w <2.0) can be detected at short ranges. In that vein, this study will investigate the ability for a long-term deployment of infrasound sensors (deployed as part of the Source Physics Experiments [SPE] from 2014 to 2020) to detect both seismic and infrasonic signals from earthquakes at local ranges (<50 km). Methods used include a combination of spectral analysis and automated array processing, supported by U.S. Geological Survey earthquake bulletins. Further, this investigation revealed no clear acoustic detections for short range earthquakes. However, secondary infrasound from an $M$ w 7.1 earthquake over 200 km away was detected. Important insights were also made regarding the performance of the SPE networks including detections of other acoustic sources such as bolides and rocket launches. Finally, evaluation of the infrasound arrays is performed to provide insight into optimal deployments for targeting earthquake infrasound.

58 GEOSCIENCES↗

Machine learning applied to wind turbine blades impact detection

The significant development of wind power generation worldwide brings, together with environmental benefits, wildlife concerns, especially for volant species vulnerability to interactions with wind energy facilities. For surveying such events, an automatic system for continuous monitoring of blade collisions is critical. An onboard multi-senor system capable of providing real-time collision detection using integrated vibration sensors is developed and successfully tested. However, to detect low signal-to-noise ratio impact can be challenging; hence, an advanced impact detection method has been developed and presented in this article. A robust automated detection algorithm based on support vector machine is proposed. After a preliminary signal pre-processing, geometric features specifically selected for their sensitivity to impact signals are extracted from raw vibration signal and energy distribution graph. The predictive model is formulated by training conventional support vector machine using extracted features for impact identification. Finally, the performance of the predictive model is evaluated by accuracy, precision, and recall. Results indicate a linear regression relationship between signal-to-noise ratio and model overall performance. Here, the proposed method is much reliable on higher signal-to-noise ratio (SNR≥6), but it shows to be ineffective at lower signal-to-noise ratio (SNR<2).

17 WIND ENERGY↗

Re-Observing the First Hours of Supernova 1987A

This project was designed to use archival data from the International Ultraviolet Explorer (IUE) to measure the flux from the shock breakout from SN 1987A, emitted in the first few hours of the event, reflected from neighboring dust clouds in the form of a light echo. Such hot flux from the initial moments of a SN had never been observed before, and this offers a unique opportunity to measure it in reflection. Gilmozzi (1991, in "SN 1987A and Other Supernova") had reported such a detection of using IUE from observations made in 1988 and 1989. Our analysis of these data showed that this detection was very weak, and subject to changes comparable to the size of the signal according to various reasonable means of extracting the spectra. In fact, the features reported by Gilmozzi (1998 in "Ultraviolet Astrophysics Beyond IUE") are not found in a conventional NEWSIPS extraction or extended-source extraction of these data. The 1995 and 1996 IUE data collected for Crotts and Gilmozzi shows a more robust signal (about 20sigma,) from a cloud that echoes brighter in the optical than the 1988 feature. This shows a well-detected signal of about 5 x 10(exp -16) ergs per s/sq cm/Angstroms/arc sq sec at 1300 Angstroms, with a declining slope to redder wavelengths. This surface brightness, while detected with confidence in both large and small SVVT apertures, is still fainter than the reflected flux expected for most models of shock breakout. We have also taken the opportunity to recover the echo signal from exposures taken on Astro-1 and Astro-2 flights of the Ultraviolet Imaging Telescope (UIT) while pointed towards SN 1987A. These data yield a complementary result on the reflected flux, an upper limit of about 5 x 10(exp -17) ergs per s/sq cm/Angstroms/arc sq sec, spread over fainter optically echoing clouds, and over the same band where the signal was detected by IUE. While this appears in contradiction with the IUE result, it is made consistent by the corresponding strengths of the echoes in the optical.

Crotts, Arlin P. S.↗

Understanding and quantifying the systematic effects of clutter within a radiation detection scene

Because of low signal-to-noise ratios, the main difficultly in real-world detection scenarios is distinguishing between benign sources and potentially-threatening radioactive materials. The variability in observed signal during a radiation detection search operation can be contributed to the stochastic nature of the underlying physics and the systematic errors inherent to the detection systems employed. This variability is compounded for dynamic detection scenarios, where objects, referred to as clutter, traverse through the primary detection scene, introducing potential suppressions in the observed signal due to the attenuation of background radiation. This study examines the impact that clutter, namely automobiles such as small utility vehicles, sedans, and trucks, produces on the observed signal in a 2 in. × 4 in. × 16 in. NaI(Tl) detector. The clutter is identified and tracked in the detection scene using a time-synced video camera and a 2-D light distance and ranging contextual sensors. Two experiments were performed on the Oak Ridge National Laboratory reservation: one using a distributed source within the scene to understand the systematics of detecting and analyzing the clutter, and the second experiment mimicking an urban environment with large buildings positioned on either side of a roadway. The experiments exhibited unique results in the amount of signal suppression and variability of the cluttered signal, both demonstrating an observable suppression from the clutter-free background. These results reveal a new potential category of signal noise intrinsic to real-world detection scenarios that should be considered when establishing detection thresholds based on expected values.

Stewart, Ian R.↗

X-ray magnetic circular dichroism and small angle neutron scattering study of thiol capped gold nanoparticles.

X-ray magnetic circular dichroism (XMCD) and Small Angle Neutron Scattering (SANS) measurements were performed on thiol capped Au nanoparticles (NPs) embedded into polyethylene. An XMCD signal of 0.8 {center_dot} 10{sup -4} was found at the Au L{sub 3} edge of thiol capped Au NPs embedded in a polyethylene matrix for which Superconducting Quantum Interference Device (SQUID) magnetometry yielded a saturation magnetization, M{sub s}, of 0.06 emu/g{sub Au}. SANS measurements showed that the 3.2 nm average-diameter nanoparticles are 28% polydispersed, but no detectable SANS magnetic signal was found with the resolution and sensitivity accessible with the neutron experiment. A comparison with previous experiments carried out on Au NPs and multilayers, yield to different values between XMCD signals and magnetization measured by SQUID magnetometer. We discuss the origin of those differences.

42 ENGINEERING↗

Cross-correlating Planck with VST ATLAS LRGs: a new test for the ISW effect in the Southern hemisphere

ABSTRACT The integrated Sachs–Wolfe (ISW) effect probes the late-time expansion history of the Universe, offering direct constraints on dark energy. Here, we present our measurements of the ISW signal at redshifts of $\bar{z}=0.35$, 0.55, and 0.68, using the cross-correlation of the Planck cosmic microwave background temperature map with ∼0.5 million luminous red galaxies (LRGs) selected from the VST ATLAS survey. We then combine these with previous measurements based on WMAP and similar SDSS LRG samples, providing a total sample of ∼2.1 million LRGs covering ∼12 000 deg2 of sky. At $\bar{z}=0.35$ and $\bar{z}=0.55$, we detect the ISW signal at 1.2σ and 2.3σ (or 2.6σ combined), in agreement with the predictions of lambda cold dark matter (ΛCDM). We verify these results by repeating the measurements using the BOSS LOWZ and CMASS, spectroscopically confirmed LRG samples. We also detect the ISW effect in three magnitude limited ATLAS + SDSS galaxy samples extending to z ≈ 0.4 at ∼2σ per sample. However, we do not detect the ISW signal at $\bar{z}=0.68$ when combining the ATLAS and SDSS results. Further tests using spectroscopically confirmed eBOSS LRGs at this redshift remain inconclusive due to the current low sky coverage of the survey. If the ISW signal is shown to be redshift dependent in a manner inconsistent with the predictions of ΛCDM, it could open the door to alternative theories such as modified gravity. It is therefore important to repeat the high-redshift ISW measurement using the completed eBOSS sample, as well as deeper upcoming surveys such as DESI and LSST.

Ansarinejad, Behzad↗

Bolide Infrasound Signal Morphology and Yield Estimates: A Case Study of Two Events Detected by a Dense Acoustic Sensor Network

Two bolides (2016 June 2 and 2019 April 4) were detected at multiple regional infrasound stations, with many of the locations receiving multiple detections. Analysis of the received signals was used to estimate the yield, location, and trajectory, as well as the type of shock that produced the received signal. The results from the infrasound analysis were compared with ground-truth information that was collected through other sensing modalities. This multimodal framework offers an expanded perspective on the processes governing bolide shock generation and propagation. The majority of signal features showed reasonable agreement between the infrasound-based interpretation and the other observational modalities, though the yield estimate from the 2019 bolide was significantly lower using the infrasound detections. There was also evidence suggesting that one of the detections was from a cylindrical shock that was initially propagating upward, which is unusual though not impossible.

79 ASTRONOMY AND ASTROPHYSICS↗

Microwave Satellite Data for Hydrologic Modeling in Ungauged Basins

An innovative flood-prediction framework is developed using Tropical Rainfall Measuring Mission precipitation forcing and a proxy for river discharge from the Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) onboard the National Aeronautics and Space Administration's Aqua satellite. The AMSR-E-detected water surface signal was correlated with in situ measurements of streamflow in the Okavango Basin in Southern Africa as indicated by a Pearson correlation coefficient of 0.90. A distributed hydrologic model, with structural data sets derived from remote-sensing data, was calibrated to yield simulations matching the flood frequencies from the AMSR-E-detected water surface signal. Model performance during a validation period yielded a Nash-Sutcliffe efficiency of 0.84. We concluded that remote-sensing data from microwave sensors could be used to supplement stream gauges in large sparsely gauged or ungauged basins to calibrate hydrologic models. Given the global availability of all required data sets, this approach can be potentially expanded to improve flood monitoring and prediction in sparsely gauged basins throughout the world

Distributed hydrologic modeling↗

Probing axionlike particles with multimessenger observations of neutron star mergers

Axion-like particles (ALPs) can be copiously produced in binary neutron star (BNS) mergers through nucleon-nucleon bremsstrahlung if the ALP-nucleon couplings 𝑔 𝑎⁢𝑁 are sizable. The ALP-photon coupling 𝑔 𝑎⁢𝛾 may trigger conversions of ultralight ALPs into photons in the magnetic fields of the merger remnant and of the Milky Way. This effect would lead to a potentially observable short gamma-ray signal, in coincidence with the gravitational-wave signal produced during the merging process. This event could be detected through multimessenger observation of BNS mergers employing the synergy between gravitational-wave detectors and gamma-ray telescopes. Here, we study the sensitivity of current and proposed MeV gamma-ray experiments to detect such a signal. As an explicit example, we consider ALP couplings related as in the Kim-Shifman-Vainshtein-Zakharov axion model, and show that in this case the proposed instruments can reach a sensitivity down to 𝑔 𝑎⁢𝛾 ≳ few ×10 −13 GeV −1 for 𝑚 𝑎 ≲ 10 −9 eV, comparable with the SN 1987A limit.

Axion-like particles↗

Ultrafast, multiphoton-pump, multiphoton-probe spectroscopy

Methods for pump-probe spectroscopy are provided. In an embodiment, such a method comprises directing pump light having a frequency ωpump at a location in a sample to excite a transition between two quantum states of a target entity in the sample, directing probe light at the location to generate a coherent output signal having a frequency ωoutput and a wavevector koutput, and detecting the output signal as the probe light is scanned over a range of frequencies. In the method, either the transition excited by the pump light is a multiphoton transition corresponding to a frequency difference of n*ωpump, wherein n≥2; or the probe light is a set of m coherent light pulses, each coherent light pulse having a frequency ωm and a wavevector km, wherein m≥2; or both. Systems for carrying out the methods are also provided.

Morrow, Darien James↗

DETECTING THE SUPERNOVA BREAKOUT BURST IN TERRESTRIAL NEUTRINO DETECTORS

We calculate the distance-dependent performance of a few representative terrestrial neutrino detectors in detecting and measuring the properties of the ν{sub e} breakout burst light curve in a Galactic core-collapse supernova. The breakout burst is a signature phenomenon of core collapse and offers a probe into the stellar core through collapse and bounce. We examine cases of no neutrino oscillations and oscillations due to normal and inverted neutrino-mass hierarchies. For the normal hierarchy, other neutrino flavors emitted by the supernova overwhelm the ν{sub e} signal, making a detection of the breakout burst difficult. For the inverted hierarchy (IH), some detectors at some distances should be able to see the ν{sub e} breakout burst peak and measure its properties. For the IH, the maximum luminosity of the breakout burst can be measured at 10 kpc to accuracies of ∼30% for Hyper-Kamiokande (Hyper-K) and ∼60% for the Deep Underground Neutrino Experiment (DUNE). Super-Kamiokande (Super-K) and Jiangmen Underground Neutrino Observatory (JUNO) lack the mass needed to make an accurate measurement. For the IH, the time of the maximum luminosity of the breakout burst can be measured in Hyper-K to an accuracy of ∼3 ms at 7 kpc, in DUNE to ∼2 ms at 4 kpc, and JUNO and Super-K can measure the time of maximum luminosity to an accuracy of ∼2 ms at 1 kpc. Detector backgrounds in IceCube render a measurement of the ν{sub e} breakout burst unlikely. For the IH, a measurement of the maximum luminosity of the breakout burst could be used to differentiate between nuclear equations of state.

79 ASTRONOMY AND ASTROPHYSICS↗

The promise of optical NMR spectroscopy for experimental aqueous geochemistry

Here, we discuss new quantum technologies being adapted to detect extraordinarily small magnetic fields. The signals are derived from the stimulated emission of light from single-atom defects in diamonds. The intensity of light reports the spin state of the electrons in the color center. The physics is relevant to geochemists because it points to a means of conducting NMR experiments on solutions in diamond-anvil cells. Because the method is so sensitive, it can detect signals in subnanoliter volumes, making work at elevated temperatures and pressures possible, and also on solutions that are dangerous in larger volumes.

58 GEOSCIENCES↗

EARLINET evaluation of the CATS Level 2 aerosol backscatter coefficient product

We present the evaluation activity of the European Aerosol Research Lidar Network (EARLINET) for the quantitative assessment of the Level 2 aerosol backscatter coefficient product derived by the Cloud-Aerosol Transport System (CATS) aboard the International Space Station (ISS; Rodier et al., 2015). The study employs correlative CATS and EARLINET backscatter measurements within a 50 km distance between the ground station and the ISS overpass and as close in time as possible, typically with the starting time or stopping time of the EARLINET performed measurement time window within 90 min of the ISS overpass, for the period from February 2015 to September 2016. The results demonstrate the good agreement of the CATS Level 2 backscatter coefficient and EARLINET. Three ISS overpasses close to the EARLINET stations of Leipzig, Germany; Évora, Portugal; and Dushanbe, Tajikistan, are analyzed here to demonstrate the performance of the CATS lidar system under different conditions. The results show that under cloud-free, relative homogeneous aerosol conditions, CATS is in good agreement with EARLINET, independent of daytime and nighttime conditions. CATS low negative biases are observed, partially attributed to the deficiency of lidar systems to detect tenuous aerosol layers of backscatter signal below the minimum detection thresholds; these are biases which may lead to systematic deviations and slight underestimations of the total aerosol optical depth (AOD) in climate studies. In addition, CATS misclassification of aerosol layers as clouds, and vice versa, in cases of coexistent and/or adjacent aerosol and cloud features, occasionally leads to non-representative, unrealistic, and cloud-contaminated aerosol profiles. Regarding solar illumination conditions, low negative biases in CATS backscatter coefficient profiles, of the order of 6.1 %, indicate the good nighttime performance of CATS. During daytime, a reduced signal-to-noise ratio by solar background illumination prevents retrievals of weakly scattering atmospheric layers that would otherwise be detectable during nighttime, leading to higher negative biases, of the order of 22.3 %.

Emmanouil Proestakis↗

Integrating event detection system operation characteristics into sensor placement optimization.

We consider the problem of placing sensors in a municipal water network when we can choose both the location of sensors and the sensitivity and specificity of the contamination warning system. Sensor stations in a municipal water distribution network continuously send sensor output information to a centralized computing facility, and event detection systems at the control center determine when to signal an anomaly worthy of response. Although most sensor placement research has assumed perfect anomaly detection, signal analysis software has parameters that control the tradeoff between false alarms and false negatives. We describe a nonlinear sensor placement formulation, which we heuristically optimize with a linear approximation that can be solved as a mixed-integer linear program. We report the results of initial experiments on a real network and discuss tradeoffs between early detection of contamination incidents, and control of false alarms.

54 ENVIRONMENTAL SCIENCES↗