Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Attenuation of stress waves in single and multi-layered structures

Analytical and experimental studies were made of the attenuation of the stress waves during passage through single and multilayer structures. The investigation included studies on elastic and plastic stress wave propagation in the composites and those on shock mitigating material characteristics such as dynamic stress-strain relations and energy absorbing properties. The results of the studies are applied to methods for reducing the stresses imposed on a spacecraft during planetary or ocean landings.

Yang, J. C. S.↗
NASA NTRS1974

Rb-Sr age of lunar igneous rocks 62295 and 14310

Measurements of Rb-Sr ages of crystallization performed on igneous lunar highland rocks 62295 and 14310 are reported. Lunar sample 62295 is a mesostasis-rich spinel-troctolite very-high-alumina basalt exhibiting a variable igneous structure. Sample 14310 is a feldspathic KREEP-rich basalt. The determined ages probably date the cooling of shock melts.

Mark, R. K.↗
NASA NTRS1978

Transient processes in the combustion of nitramine propellants

A transient combustion model of nitramine propellants is combined with an isentropic compression shock formation model to determine the role of nitramine propellant combustion in DDT, excluding effects associated with propellant structural properties or mechanical behavior. The model is derived to represent the closed pipe experiment that is widely used to characterize explosives, except that the combustible material is a monolithic charge rather than compressed powder. Computations reveal that the transient combustion process cannot by itself produce DDT by this model. Compressibility of the solid at high pressure is the key factor limiting pressure buildups created by the combustion. On the other hand, combustion mechanisms which promote pressure buildups are identified and related to propellant formulation variables. Additional combustion instability data for nitramine propellants are presented. Although measured combustion response continues to be low, more data are required to distinguish HMX and active binder component contributions. A design for a closed vessel apparatus for experimental studies of high pressure combustion is discussed.

Cohen, N. S.↗
NASA NTRS1985

Fast turbulent correlations from phase coherence velocimetry

Flows with coherent structures allow see-free measurements of local velocity and velocity fluctuations. Continuous turbulent velocity histories in ionizing shock waves are obtained at a 10-MHz sampling rate. From this, correlation profiles and frequency spectra are determined which reveal the presence of prominent high-frequency components.

Johnson, J. A., III↗
NASA NTRS1986

Evaluation of diffuse-illumination holographic cinematography in a flutter cascade

Since 1979, the Lewis Research Center has examined holographic cinematography for three-dimensional flow visualization. The Nd:YAG lasers used were Q-switched, double-pulsed, and frequency-doubled, operating at 20 pulses per second. The primary subjects for flow visualization were the shock waves produced in two flutter cascades. Flow visualization was by diffuse-illumination, double-exposure, and holographic interferometry. The performances of the lasers, holography, and diffuse-illumination interferometry are evaluated in single-window wind tunnels. The fringe-contrast factor is used to evaluate the results. The effects of turbulence on shock-wave visualization in a transonic flow are discussed. The depth of field for visualization of a turbulent structure is demonstrated to be a measure of the relative density and scale of that structure. Other items discussed are the holographic emulsion, tests of coherence and polarization, effects of windows and diffusers, hologram bleaching, laser configurations, influence and handling of specular reflections, modes of fringe localization, noise sources, and coherence requirements as a function of the pulse energy. Holography and diffuse illumination interferometry are also reviewed.

Decker, A. J.↗
NASA NTRS1989

A Survey of Measurements and Measuring Techniques in Rapidly Distorted Compressible Turbulent Boundary Layers

A wide range of recent work on compressible turbulent boundary layers is described. Special attention was paid to flows with rapid changes in pressure including flows with shock waves, curved walls, and expansions. The application of rapid distortion theory to flows transversing expansion and shock waves is reviewed. This is followed by an account of experiments aimed at elucidating the large scale structures present in supersonic boundary layers. The current status of laser-Doppler and hot-wire anemometry in supersonic flow is discussed, and a new interferometric technique for the determination of wall-stress is described. The use of small pressure transducers to deduce information about the structure of zero pressure-gradient and severely perturbed boundary layers is investigated. Finally, there is an extension of the data presentation of AGARDographs 223, 253 and 263 to cover rapidly distorted boundary layers.

Fernholz, H. H.↗
NASA NTRS1990

Schlieren studies of compressibility effects on dynamic stall of airfoils in transient pitching motion

Compressibility effects on the flowfield of an airfoil executing rapid transient pitching motion from 0 - 60 degrees over a wide range of Mach numbers and pitching rates were studied using a stroboscopic schlieren flow visualization technique. The studies have led to the first direct experimental documentation of multiple shocks on the airfoil upper surface flow for certain conditions. Also, at low Mach numbers, additional coherent vortical structures were found to be present along with the dynamic stall vortex, whereas at higher Mach numbers, the flow was dominated by a single vortex. The delineating Mach number for significant compressibility effects was 0.3 and the dynamic stall process was accelerated by increasing the Mach number above that value. Increasing the pitch rate monotonically delayed stall to angles of attack as large as 27 degrees.

Chandrasekhara, M. S.↗
NASA NTRS1992

Nonlinear magnetosonic waves and mirror mode structures in the March 1991 Ulysses interplanetary event

In examining the March 23-25, 1991 Ulysses (2.2 AU) high speed solar wind events, two distinct plasma wave modes are found: steepened magnetosonic waves with whistler precursors and mirror mode structures. These two modes are locally generated by plasma instabilities, presumably associated with anisotropies existing in the energetic shock particles and solar wind plasma, respectively. The magnetosonic waves are generated by a right-hand resonant instability associated with an about 40 keV ion beam. By an extrapolation of the results presented here, assuming microflares and nanoflares at the sun generate shocks in the lower corona and these shocks accelerate energetic ions, it is suggested that the ions, via the right-hand resonant instability, generate magnetosonic waves which steepened to form 'microshocks'. These shocks could, in turn, accelerate more energetic ions, leading to a shock/energetic ion/magnetosonic wave cascade. These newly formed magnetosonic waves and shocks presumably could propagate in a broad range of directions, leading to energy dissipation over a large region of the outer corona.

Tsurutani, Bruce T.↗
NASA NTRS1992

The pseudotachylites from the Vredefort structure and the Witwatersrand basin

Pseudotachylite (PT) from both the Sudbury structure in Ontario and the Vredefort Dome in South Africa have been widely cited as the result of shock (impact)-induced brecciation. In the scientific and popular literature PT has been described as shock melt or even as impact melt rock. In contrast, others have for years requested that a clarification of the definitions for PT and impact melt rock be pursued. We have suggested that, until that time when well-defined criteria for genetically different melt rock types (e.g., generated by impact or tectonic processes) will have been established, the term PT should only be used as a descriptive one and that, wherever genetic implications are discussed, other terms, such as impact melt (rock) or friction melt, should be applied. It is obvious that these suggestions are not only of value for the discussion of terrestrial melt rocks of controversial origin, but also apply to the characterization of melt veins in extraterrestrial materials. Important observations on Vredefort and Witwatersrand pseudotachylite are summarized.

Reimold, W. U.↗
NASA NTRS1995

The Outer Heliosphere: Solar Wind, Cosmic Ray and VLF Radio Emission Variations

The Voyager 1 and 2 spacecraft now 45 astronomical units (AU) from Earth continue to monitor the outer heliosphere field and particles environment on a daily basis during their journey to the termination shock of the solar wind. Strong transient shocks continue to be detected in the solar wind plasma. The largest of these are associated with Global Merged Interaction Regions (GMIR's) which, in turn, block cosmic ray entry into the inner heliosphere and are apparently responsible for triggering the two major episodes of VLF radio emissions now thought to come from the heliopause. Distance estimates to the termination shock are consistent with those determined from observations of anomalous cosmic rays. Current observations and implications for heliospheric structure are discussed.

McNutt, Ralph L., Jr.↗
NASA NTRS1960

Thermal Design of the Micrometeoroid Satellite S-55

The thermal design of the micrometeoroid satellite S-55 involves both experimental and analytical approaches in selecting materials and coatings. A cutaway drawing of the S-55 satellite is shown. The purpose of which is to obtain scientific and engineering design data on the frequency and penetration hazard of micrometeoroids at altitudes between about 250 nautical miles and 700 nautical miles. The passive method of thermal control used involves the selection of materials and coatings that give the desired ratio of absorptivity to emissivity alpha/epsilon for keeping the telemetry temperature within narrow limits and also to prevent overheating of the separate experiments. The selection of a material or coating for this purpose, however, is dictated not only by its absorptivity and emissivity values, but also by its reliability and the constancy of these values under long exposure to the space environment. Several test programs have been conducted in order to evaluate the materials and coatings being considered. Some of these are as follows: (1) Ultraviolet radiation in a vacuum to study discoloration and weight change. (2) Solar radiation in a vacuum to determine maximum equilibrium temperature, discoloration, and weight loss. (3) Thermal cycling and thermal shock to study material integrity (leaking, spalling, melting, etc.). (4) Proton radiation to observe effects on color, crystal structure, and strength. (5) Determination of effects of heat associated with coating application on the leak rate of pressurized parts. (6) Absorptivity and emissivity measurements. The experimental tests outlined and the maximum use of coating methods successfully employed on previous satellites should provide high reliability of the material used for the thermal design of this vehicle. A theoretical analysis was made to determine the values of alpha/epsilon required for different areas in order that the telemetry remain within the desired temperature limits.

Hastings, Earl C., Jr.↗
NASA NTRS2009

Ultra High Temperature Ceramics' Processing Routes and Microstructures Compared

Ultra High Temperature Ceramics (UHTCs), such as HfB2 and ZrB2 composites containing SiC, are known to have good thermal shock resistance and high thermal conductivity at elevated temperatures. These UHTCs have been proposed for a number of structural applications in hypersonic vehicles, nozzles, and sharp leading edges. NASA Ames is working on controlling UHTC properties (especially, mechanical properties, thermal conductivity, and oxidation resistance) through processing, composition, and microstructure. In addition to using traditional methods of combining additives to boride powders, we are preparing UHTCs using coat ing powders to produce both borides and additives. These coatings and additions to the powders are used to manipulate and control grain-boundary composition and second- and third-phase variations within the UHTCs. Controlling the composition of high temperature oxidation by-products is also an important consideration. The powders are consolidated by hot-pressing or field-assisted sintering (FAS). Comparisons of microstructures and hardness data will be presented.

Gusman, Michael↗
NASA NTRSDate not supplied

Rapid Hypersonic Simulations using US3D and Pointwise

For hypersonic simulations, unstructured flow solvers typically have problems predicting surface heat fluxes when strong shocks are present. To address these issues, this paper outlines a workflow that applies best practices developed for structured grids to unstructured meshes. In addition, unstructured grid generation can significantly reduce the time required to create quality grids for complex geometries. Several examples are computed using DPLR, a structured grid flow solver, and US3D flow, an unstructured mesh solver. Results from the two codes are compared, and they show excellent agreement. Overall, the unstructured grid workflow offers a viable and attractive alternative for hypersonic simulations.

C. Tang↗
NASA NTRSDate not supplied

Rapid Hypersonic Simulations using US3D and Pointwise

For hypersonic simulations, unstructured flow solvers typically have problems predicting surface heat fluxes when strong shocks are present. To address these issues, this paper outlines a workflow that applies best practices developed for structured grids to unstructured meshes. In addition, unstructured grid generation can significantly reduce the time required to create quality grids for complex geometries. Several examples are computed using DPLR, a structured grid flow solver, and US3D flow, an unstructured mesh solver. Results from the two codes are compared, and they show excellent agreement. Overall, the unstructured grid workflow offers a viable and attractive alternative for hypersonic simulations.

Chun Tang↗
DOE OSTI2022

Hybrid particle-in-cell simulations of electromagnetic coupling and waves from streaming burst debris

Various systems can be modeled as a point-like explosion of ionized debris into a magnetized, collisionless background plasma-including astrophysical examples, active experiments in space, and laser-driven laboratory experiments. Debris streaming from the explosion parallel to the magnetic field may drive multiple resonant and non-resonant ion-ion beam instabilities, some of which can efficiently couple the debris energy to the background and may even support the formation of shocks. We present a large-scale hybrid (kinetic ions + fluid electrons) particle-in-cell simulation, extending hundreds of ion inertial lengths from a 3D explosion, that resolves these instabilities. We show that the character of these instabilities differs notably from the 1D equivalent by the presence of unique transverse structure. Additional 2D simulations explore how the debris beam length, width, density, and speed affect debris-background coupling, with implications for the generation of quasi-parallel shocks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Shock state distributions in porous tantalum and characterization with multipoint velocimetry

Heterogenous materials under shock compression can be expected to reach different shock states throughout the material according to local differences in microstructure and the history of wave propagation. Here, in this work, a compact, multiple-beam focusing optic assembly is used with high-speed velocimetry to interrogate the shock response of porous tantalum films prepared through thermal-spray deposition. The distribution of particle velocities across a shocked interface is compared to results obtained using a set of defocused interferometric beams that sampled the shock response over larger areas. The two methods produced velocity distributions along the shock plateau with the same mean, while a larger variance was measured with narrower beams. The finding was replicated using three-dimensional, mesoscopically resolved hydrodynamics simulations of solid tantalum with a pore structure mimicking statistical attributes of the material and accounting for radial divergence of the beams, with agreement across several impact velocities. Accounting for pore morphology in the simulations was found to be necessary for replicating the rise time of the shock plateau. The validated simulations were then used to show that while the average velocity along the shock plateau could be determined accurately with only a few interferometric beams, accurately determining the width of the velocity distribution, which here was approximately Gaussian, required a beam dimension much smaller than the spatial correlation lengthscale of the velocity field, here by a factor of ∼30×, with implications for the study of other porous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Shocks in the stacked Sunyaev-Zel’dovich profiles of clusters II: Measurements from SPT-SZ + Planck Compton- y map

ABSTRACT We search for the signature of cosmological shocks in stacked gas pressure profiles of galaxy clusters using data from the South Pole Telescope (SPT). Specifically, we stack the latest Compton-y maps from the 2500 deg2 SPT-SZ survey on the locations of clusters identified in that same data set. The sample contains 516 clusters with mean mass $\langle M_{\rm 200m}\rangle = 10^{14.9} \, {\rm M}_\odot$ and redshift 〈z〉 = 0.55. We analyse in parallel a set of zoom-in hydrodynamical simulations from the three hundred project. The SPT-SZ data show two features: (i) a pressure deficit at R/R200m = 1.08 ± 0.09, measured at 3.1σ significance and not observed in the simulations, and; (ii) a sharp decrease in pressure at R/R200m = 4.58 ± 1.24 at 2.0σ significance. The pressure deficit is qualitatively consistent with a shock-induced thermal non-equilibrium between electrons and ions, and the second feature is consistent with accretion shocks seen in previous studies. We split the cluster sample by redshift and mass, and find both features exist in all cases. There are also no significant differences in features along and across the cluster major axis, whose orientation roughly points towards filamentary structure. As a consistency test, we also analyse clusters from the Planck and Atacama Cosmology Telescope Polarimeter surveys and find quantitatively similar features in the pressure profiles. Finally, we compare the accretion shock radius ($R_{\rm sh,\, acc}$) with existing measurements of the splashback radius (Rsp) for SPT-SZ and constrain the lower limit of the ratio, $R_{\rm sh,\, acc}/R_{\rm sp}\gt 2.16 \pm 0.59$.

79 ASTRONOMY AND ASTROPHYSICS↗