Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Spacelab experiments on convection in a rotating spherical shell with radial gravity

Data from the geophysical fluid flow cell experiment on Spacelab 3 revealed the diverse forms of fluid motion that can occur in geometrically simple models of global convection with rotation and radial gravity. The following types of convection were observed: midlatitude waves interacting with the low-latitude columnar convection rolls or 'banana cells', spiral waves' near the poles when latitudinal heating gradients are present on the bounding surfaces, and 'triangular waves' coupling midlatitude and equatorial disturbances under similar differential heating. It is believed that concepts based on the Taylor-Proudman theorem have a central role in many flows realized in the rapidly rotating experiments when H is approximately 0; however, the resulting banana cells are subject to secondary instabilities that produce intricate time dependence and eventually turbulent flows in which only hints of the simpler patterns are recognizable.

Toomre, Juri↗

Discovery of a cool expanding shell at -1200 kilometers per second around V471 Tauri

High-resolution IUE spectra of V471 Tauri reveal the presence of a very-high-velocity cool expanding gas in the line of sight to the binary system with an expansion velocity of -1200 km/s. The summed strength of the coadded absorption is 125 mA + or - 25 mA, with FWHM = 30 km/s. It is suggested that the observed absorption may be related to the narrow coadded absorption at -590 km/s noted by Bruhweiler and Sion (1966). The large expansion velocity suggests a possible association with an ancient nova outburst.

Sion, Edward M.↗

Fault offsets and lateral crustal movement on Europa - Evidence for a mobile ice shell

An examination is conducted of Europa's cross-cutting structural relationships between various lineament types, in order to constrain the type of structure involved in each such case and, where possible, to also constrain the degree of extension across the lineaments. Evidence is adduced for significant lateral crustal movement, allowing alternative models and mechanisms for lineament formation to be discussed, as well as plausible lithospheric and crustal models. The question as to whether any of the water-ice layer has been, or currently is, liquid, is also treated in light of the evidence obtained.

Schenk, Paul M.↗

A pulsation phase-dependent dust shell model of OH 26.5 + 0.6

The spectral energy distribution of the radio-luminous OH/IR star 26.5 + 0.6 was modeled as a function of pulsation phase, using standard radiative-transfer techniques but with more self-consistent input parameters based partly on pulsation model calculations. The changes in spectral shape and overall intensity are easily explained in terms of the radial movement of the dust condensation radius with the changing luminosity of the star. The derived amplitude of the bolometric light curve is only 1.2 mag, considerably less than expected.

Suh, Kyung-Won↗

Ionization processes in collisions of open-shell atoms. III - The autoionizing states of nitrogen

Results of a study of the energy spectra of electrons produced in collisions of N atoms with inert gases at low keV energies are reported. Ionization here is partly due to production of the (1Dnl) autoionizing states of nitrogen and partly due to another mechanism, which is presumably quasi molecular Auger ionization. A discussion of the assignments of the autoionizing states is presented.

Boumsellek, S.↗

W28 and 3C 400.2 - Two shell-like radio supernova remnants with centrally peaked X-ray morphologies

The paper describes X-ray and optical observations with the Einstein Observatory of two SNRs which are examples of a group of SNRs that have centrally peaked X-ray surface brightness distributions and limb-brightened radio morphologies. X-ray and optical spectra confirm that they are located along lines of sight with substantial intervening absorption, as is the case of other objects that have these morphological characteristics. The hydrogen column density along the line of sight to both remnants is established at (7-11) x 10 to the 21st/sq cm. A thermal origin is proposed as the most likely explanation for the X-ray morphology. It is demonstrated that these SNRs do not have a density and temperature distribution which resembles that of a point explosion in a uniform-density medium, even when the overburden of absorption is considered.

Long, Knox S.↗

Toward mapping the UV circumstellar shells of late-type stars

Detection of spatially resolved circumstellar matter surrounding selected cool stars, using off-source observations made with the International Ultraviolet Explorer satellite, is reported. The data demonstrate that: (1) the instrumental scattered light profile of IUE appears to depend on the ultraviolet color temperature of the star observed, and (2) certain red stars show signal in excess of the instrumental levels, at spatial offsets of 10 to 20 arc-seconds from the star.

Stencel, Robert E.↗

A finite dynamic element for laminated composite plates and shells

Development of finite dynamic elements can result in a significant reduction of computing time and cost for calculation of natural frequencies and mode shapes, which is an essential part of flutter prediction. Analysis with and without the dynamic terms is an alternative to constructing a new finite element mesh, to determine whether the mesh is sufficiently refined. Finite dynamic elements show spectacular improvement in convergence of higher modes with mesh refinement, but the improvement for lower modes is not so great. Cost reduction ratios greater than 20 have been observed for some modes. An average cost reduction ratio of 12 was achieved for the first six modes of a swept, tapered sandwich composite plate, at the 3 percent error level. Another set of calculations was made to determine the mesh density and cost parameters for which none of the first 12 frequencies was in error by more than 3 percent. It was found that the computing cost parameter for the dynamic element was about three times lower than the basic triangular element and 5.9 times lower than an eight-node isoparametric element.

Martin, C. W.↗

Automated Predictive Diagnosis (APD): A 3-tiered shell for building expert systems for automated predictions and decision making

The APD software features include: On-line help, Three level architecture, (Logic environments, Setup/Application environment, Data environment), Explanation capability, and File handling. The kinds of experimentation and record keeping that leads to effective expert systems is facilitated by: (1) a library of inferencing modules (in the logic environment); (2) an explanation capability which reveals logic strategies to users; (3) automated file naming conventions; (4) an information retrieval system; and (5) on-line help. These aid with effective use of knowledge, debugging and experimentation. Since the APD software anticipates the logical rules becoming complicated, it is embedded in a production system language (CLIPS) to insure the full power of the production system paradigm of CLIPS and availability of the procedural language C. The development is discussed of the APD software and three example applications: toy, experimental, and operational prototype for submarine maintenance predictions.

Steib, Michael↗

The C shell, an active detector of UH nuclei

This paper gives a brief description of the current status of the present program to develop a modular array of large electronic particle detectors. These modules were designed to study the UH nuclei in the cosmic radiation with eventual deployment on the Space Station or at a lunar base. This array would determine the abundances of elements from iron to the actinides and directly measure the energies of the lower energy nuclei. If the array was deployed on the Space Station, it would use the geomagnetic threshold to place limits on the higher energy nuclei, thus studying the energy spectrum up to about 10 GeV/n. Deployed at a lunar base, it would detect nuclei with energies down to the instrumental limit. Smaller versions could be flown on balloons to test and refine the modules.

Waddington, C. J.↗

Pressurized Shell Molds For Metal-Matrix Composites

Balanced-pressure molds used to make parts in complex shapes from fiber-reinforced metal-matrix composite materials. In single step, molding process makes parts in nearly final shapes; only minor finishing needed. Because molding pressure same on inside and outside, mold does not have to be especially strong and can be made of cheap, nonstructural material like glass or graphite. Fibers do not have to be cut to conform to molds. Method produces parts with high content of continuous fibers. Parts stiff but light in weight, and coefficients of thermal expansion adjusted. Parts resistant to mechanical and thermal fatigue superior to similar parts made by prior fabrication methods.

Kashalikar, Uday K.↗

Ultraviolet observations of close-binary and pulsating nuclei of planetary nebulae; Winds and shells around low-mass supergiants; The close-binary nucleus of the planetary nebula HFG-1; A search for binary nuclei of planetary nebulae; UV monitoring of irregularly variable planetary nuclei; and The pulsating nucleus of the planetary nebula Lo 4

A brief summary of the research highlights is presented. The topics covered include the following: binary nuclei of planetary nebulae; other variable planetary nuclei; low-mass supergiants; and other IUE-related research.

Bond, Howard E.↗

An expert system shell for inferring vegetation characteristics: Implementation of additional techniques (task E)

The NASA VEGetation Workbench (VEG) is a knowledge based system that infers vegetation characteristics from reflectance data. The VEG subgoal PROPORTION.GROUND.COVER has been completed and a number of additional techniques that infer the proportion ground cover of a sample have been implemented. Some techniques operate on sample data at a single wavelength. The techniques previously incorporated in VEG for other subgoals operated on data at a single wavelength so implementing the additional single wavelength techniques required no changes to the structure of VEG. Two techniques which use data at multiple wavelengths to infer proportion ground cover were also implemented. This work involved modifying the structure of VEG so that multiple wavelength techniques could be incorporated. All the new techniques were tested using both the VEG 'Research Mode' and the 'Automatic Mode.'

Harrison, P. Ann↗