Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Correlating inter-particle forces and particle shape to shear-induced aggregation/fragmentation and rheology for dilute anisotropic particle suspensions: A complementary study via capillary rheometry and in-situ small and ultra-small angle X-ray scattering

Predicting the stability of suspensions composed of anisotropic particles is difficult due to the complexity and interplay of hydrodynamic and colloidal forces. For example, it is not well understood how non-spherical particle shapes affect suspension-rheological responses. This study presents evidence showing how the stacking of boehmite platelets dispersed in aqueous solution leads to moderate shear thinning, even at low boehmite mass fractions. Wide angle X-ray, small angle X-ray, and ultra-small angle X-ray scattering were used to simultaneously monitor changes to the size and fractal dimensions of boehmite aggregates from 6 – 10,000 Å as the sample was recirculated through an in situ capillary rheometer. The latter also provided simultaneous measurements of the viscosity of the suspensions. Computational fluid dynamics modeling of the apparatus was used to provide a more rigorous analysis of the fluid flow. In addition to shear-induced aggregation/fragmentation correlated to a complicated balance between hydrodynamic and colloidal forces, the results indicate that orientationally-dependent interactions, arising from non-spherical boehmite aggregate sub-units, may explain the relatively large experimental viscosity when the hydrodynamic force is small compared to colloidal forces. Ultimately, the results from this study can provide a foundation for future work investigating particle shape effects on colloidal and hydrodynamics forces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unconditionally convergent nonlinear solver for hyperbolic conservation laws with S-shaped flux functions

This paper addresses the convergence properties of implicit numerical solution algorithms for nonlinear hyperbolic transport problems. It is shown that the Newton-Raphson (NR) method converges for any time step size, if the flux function is convex, concave, or linear, which is, in general, the case for CFD problems. In some problems, e.g., multiphase flow in porous media, the nonlinear flux function is S-shaped (not uniformly convex or concave); as a result, a standard NR iteration can diverge for large time steps, even if an implicit discretization scheme is used to solve the nonlinear system of equations. In practice, when such convergence difficulties are encountered, the current time step is cut, previous iterations are discarded, a smaller time step size is tried, and the NR process is repeated. The criteria for time step cutting and selection are usually based on heuristics that limit the allowable change in the solution over a time step and/or NR iteration. Here, we propose a simple modification to the NR iteration scheme for conservation laws with S-shaped flux functions that converges for any time step size. The new scheme allows one to choose the time step size based on accuracy consideration only without worrying about the convergence behavior of the nonlinear solver. The proposed method can be implemented in an existing simulator, e.g., for CO{sub 2} sequestration or reservoir flow modeling, quite easily. The numerical analysis is confirmed with simulation studies using various test cases of nonlinear multiphase transport in porous media. The analysis and numerical experiments demonstrate that the modified scheme allows for the use of arbitrarily large time steps for this class of problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelling of water wave interaction with multiple cylinders of arbitrary shape

This paper describes the development of an efficient numerical model, namely scaled boundary finite-element method (SBFEM) for linear waves interaction with cylindrical structures of arbitrary shapes. The two-dimensional Helmholtz equation is firstly weakened in the circumferential direction, so that the governing partial differential equation is transformed to an ordinary matrix differential equation in radial direction, and is solved fully analytically. As a key element, a virtual porous circular cylinder surrounding the cylindrical structures is introduced so that the entire computational domain is partitioned along the virtual cylinder into an unbounded and several bounded sub-domains with common interfaces. The principle innovation is that, the present SBFEM model chooses Hankel function as a base solution for the unbounded sub-domain, while a power series is used for the internal bounded sub-domains. The approach discretises only the common interfaces of the sub-domains with surface finite-elements, and fewer elements are required to obtain very accurate results. Numerical simulations show that the new SBFEM model offers a considerable improvement by far in its numerical performance, as well as in the range of physical phenomena that is capable of simulating. The wave forces and run-ups are presented for a single and multiple cylindrical structures of different cross sectional shapes. Influences of the incident wave parameters and structural configurations on the hydrodynamics are examined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Automated divertor target design by adjoint shape sensitivity analysis and a one-shot method

As magnetic confinement fusion progresses towards the development of first reactor-scale devices, computational tokamak divertor design is a topic of high priority. Presently, edge plasma codes are used in a forward approach, where magnetic field and divertor geometry are manually adjusted to meet design requirements. Due to the complex edge plasma flows and large number of design variables, this method is computationally very demanding. On the other hand, efficient optimization-based design strategies have been developed in computational aerodynamics and fluid mechanics. Such an optimization approach to divertor target shape design is elaborated in the present paper. A general formulation of the design problems is given, and conditions characterizing the optimal designs are formulated. Using a continuous adjoint framework, design sensitivities can be computed at a cost of only two edge plasma simulations, independent of the number of design variables. Furthermore, by using a one-shot method the entire optimization problem can be solved at an equivalent cost of only a few forward simulations. The methodology is applied to target shape design for uniform power load, in simplified edge plasma geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification of subsurface structures using electromagnetic data and shape priors

We consider the inverse problem of identifying large-scale subsurface structures using the controlled source electromagnetic method. To identify structures in the subsurface where the contrast in electric conductivity can be small, regularization is needed to bias the solution towards preserving structural information. We propose to combine two approaches for regularization of the inverse problem. In the first approach we utilize a model-based, reduced, composite representation of the electric conductivity that is highly flexible, even for a moderate number of degrees of freedom. With a low number of parameters, the inverse problem is efficiently solved using a standard, second-order gradient-based optimization algorithm. Further regularization is obtained using structural prior information, available, e.g., from interpreted seismic data. The reduced conductivity representation is suitable for incorporation of structural prior information. Such prior information cannot, however, be accurately modeled with a gaussian distribution. To alleviate this, we incorporate the structural information using shape priors. The shape prior technique requires the choice of kernel function, which is application dependent. We argue for using the conditionally positive definite kernel which is shown to have computational advantages over the commonly applied gaussian kernel for our problem. Numerical experiments on various test cases show that the methodology is able to identify fairly complex subsurface electric conductivity distributions while preserving structural prior information during the inversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved C 1 shape functions for simplex meshes

Using continuously-differentiable (C 1 ) interpolation methods previously developed for computer visualization and other applications, a new class of shape functions is constructed and applied to electrostatic (ES) Particle-In-Cell (PIC) simulations on simplex (triangle or tetrahedral) meshes. The resulting shape functions are non-negative and partition unity,and lead to a reduction of shot noise and aliasing associated with particle interpolation to and from the mesh. For an energy-conserving implementation as chosen, C 1 interpolation of the potential leads to a continuous (C 0 ) electric field, with associated improved fidelity of particle motion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First-passage time statistics on surfaces of general shape: Surface PDE solvers using Generalized Moving Least Squares (GMLS)

Here, we develop numerical methods for computing statistics of stochastic processes on surfaces of general shape with drift-diffusion dynamics d X t = a (X t ) dt + b(X t ) d W t . We formulate descriptions of Brownian motion and general drift-diffusion processes on surfaces. We consider statistics of the form u (x) = E x [$∫^{τ}_{0}$ g (X t ) dt ] + E x [ f (X τ )] for a domain Ω and the exit stopping time τ = inf t { t >0 | X i Ω}, where f , g are general smooth functions. For computing these statistics, we develop high-order Generalized Moving Least Squares (GMLS) solvers for associated surface PDE boundary-value problems based on Backward- Kolmogorov equations. We focus particularly on the mean First Passage Times (FPTs) given by the case f = 0, g = 1 where u (x) = E x [τ]. We perform studies for a variety of shapes showing our methods converge with high-order accuracy both in capturing the geometry and the surface PDE solutions. We then perform studies showing how statistics are influenced by the surface geometry, drift dynamics, and spatially dependent diffusivities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GaN nanowires with pentagon shape cross-section by ammonia-source molecular beam epitaxy

In this study, ammonia-based molecular beam epitaxy (NH 3 -MBE) was used to grow catalyst-assisted GaN nanowires on (11¯02) r-plane sapphire substrates. Dislocation free [112¯0] oriented nanowires are formed with pentagon shape cross-section, instead of the usual triangular shape facet configuration. Specifically, the cross-section is the result of the additional two nonpolar {101¯0} side facets, which appear due to a decrease in relative growth rate of the {101¯0} facets to the {101¯1} and {101¯1} facets under the growth regime in NH 3 -MBE. Compared to GaN nanowires grown by Ni-catalyzed metal–organic chemical vapor deposition, the NH 3 -MBE grown GaN nanowires show more than an order of magnitude increase in band-edge to yellow luminescence intensity ratio, as measured by cathodoluminescence, indicating improved microstructural and optical properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial Regrowth and Hole Shape Engineering for Photonic Crystal Surface Emitting Lasers (PCSELs)

In the present research, epitaxial regrowth by molecular beam epitaxy (MBE) is investigated as a fabrication process for void-semiconductor photonic crystal (PhC) surface emitting lasers (PCSELs). The PhC is patterned by electron beam lithography (EBL) and inductively coupled plasma (ICP) etch and is subsequently regrown by molecular beam epitaxy to embed a series of voids in bulk semiconductor. Experiments are conducted to investigate the effects of regrowth on air-hole morphology. The resulting voids have a distinct teardrop shape with the radius and depth of the etched hole playing a very critical role in the final regrown void’s dimensions. We demonstrate that specific hole diameters can encourage deposition to the bottom of the voids or to their sidewalls, allowing us to engineer the shape of the void more precisely as is required by the PCSEL design. A 980 nm InGaAs quantum well laser structure is optimized for low threshold lasing at the design wavelength and full device structures are patterned and regrown. An optically pumped PCSEL is demonstrated from this process.

36 MATERIALS SCIENCE↗

Computational modeling and neutron imaging to understand interface shape and solute segregation during the vertical gradient freeze growth of BaBrCl:Eu

In this work we apply continuum models to analyze phase change, heat transfer, fluid flow, solute transport, and segregation in order to understand prior neutron imaging observations of the vertical gradient freeze growth of Eu-doped BaBrCl. The models provide a rigorous framework in which to understand the mechanisms that are responsible for the complicated evolution of interface shape and dopant distribution in the growth experiment. We explain how a transition in the solid/liquid interface shape from concave to convex is driven by changes in radial heat transfer caused by furnace design. We also provide a mechanistic explanation of how dynamic growth conditions and changes of the flow structure in the melt result in complicated segregation patterns in this system. A growth pause caused by controller lock-up is shown to result in a band of solute depletion in accordance with classical theory. However, changing flow patterns during growth result in a non-monotonic axial distribution of solute that cannot be explained by simple application of classical segregation models. We assert that the approach presented here, namely the use of rigorous models in conjunction advanced diagnostics, such as neutron imaging, provides an exciting path forward for process optimization and control, accelerating the incremental advances that have, in the past, typically relied on empiricism, experience, and intuition.

36 MATERIALS SCIENCE↗

Reticulation of low density shape memory polymer foam with an in vivo demonstration of vascular occlusion

Recently, predominantly closed-cell low density shape memory polymer (SMP) foam was reported to be an effective aneurysm filling device in a porcine model (Rodriguez et al., Journal of Biomedical Materials Research Part A 2013: (http://dx.doi.org/10.1002/jbm.a.34782)). Because healing involves blood clotting and cell migration throughout the foam volume, a more open-cell structure may further enhance the healing response. This research sought to develop a non-destructive reticulation process for this SMP foam to disrupt the membranes between pore cells. Non-destructive mechanical reticulation was achieved using a gravity-driven floating nitinol pin array coupled with vibratory agitation of the foam and supplemental chemical etching. Lastly, reticulation resulted in a reduced elastic modulus and increased permeability, but did not impede the shape memory behavior. Reticulated foams were capable of achieving rapid vascular occlusion in an in vivo porcine model.

59 BASIC BIOLOGICAL SCIENCES↗

Line shape parameters of PH 3 transitions in the Pentad near 4–5 μm: Self-broadened widths, shifts, line mixing and speed dependence

Accurate knowledge of spectroscopic line parameters of PH 3 is important for remote sensing of the outer planets, especially Jupiter and Saturn. In a recent study, line positions and intensities for the Pentad bands of PH 3 have been reported from analysis of high-resolution, high signal-to noise room-temperature spectra recorded with two Fourier transform spectrometers (2014) [1]. The results presented in this study were obtained during the analysis of positions and intensities, but here we focus on the measurements of spectral line shapes (e.g. widths, shifts, line mixing) for the 2ν 4 , ν 2 + ν 4 , ν 1 and ν 3 bands. A multispectrum nonlinear least squares curve fitting technique employing a non-Voigt line shape to include line mixing and speed dependence of the Lorentz width was employed to fit the spectra simultaneously. The least squares fittings were performed on five room-temperature spectra recorded at various PH 3 pressures (~2–50 Torr) with the Bruker IFS-125HR Fourier transform spectrometer (FTS) located at the Pacific Northwest National Laboratory (PNNL), in Richland, Washington. Over 840 Lorentz self-broadened half-width coefficients, 620 self-shift coefficients and 185 speed dependence parameters were measured. Line mixing was detected for transitions in the 2ν 4 , ν 1 and ν 3 bands, and their values were quantified for 10 A+A- pairs of transitions via off-diagonal relaxation matrix element formalism. The dependences of the measured half-width coefficients on the J and K rotational quanta of the transitions are discussed. The self-width coefficients for the ν 1 and ν 3 bands from this study are compared to the self-width coefficients for transitions with the same rotational quanta (J, K) reported for the Dyad (ν 2 and ν 4 ) bands. The measurements from present study should be useful for the development of a reliable theoretical modeling of pressure-broadened widths, shifts and line mixing in symmetric top molecules with C 3v symmetry in general, and of PH 3 in particular.

Malathy Devi, V.↗

Magnetic nanoparticles for power absorption: Optimizing size, shape and magnetic properties

We present a study on the magnetic properties of naked and silica-coated Fe{sub 3}O{sub 4} nanoparticles with sizes between 5 and 110 nm. Their efficiency as heating agents was assessed through specific power absorption (SPA) measurements as a function of particle size and shape. The results show a strong dependence of the SPA with the particle size, with a maximum around 30 nm, as expected for a Neel relaxation mechanism in single-domain particles. The SiO{sub 2} shell thickness was found to play an important role in the SPA mechanism by hindering the heat outflow, thus decreasing the heating efficiency. It is concluded that a compromise between good heating efficiency and surface functionality for biomedical purposes can be attained by making the SiO{sub 2} functional coating as thin as possible. - Graphical Abstract: The magnetic properties of Fe{sub 3}O{sub 4} nanoparticles from 5 to 110 nm are presented, and their efficiency as heating agents discussed as a function of particle size, shape and surface functionalization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, structure and magnetism of a S-shaped multi-iron substituted arsenotungstate containing a trivacant Keggin [B-{alpha}-As{sup V}W{sub 9}O{sub 34}]{sup 9-} and a hexavacant Keggin [{alpha}-As{sup V}W{sub 6}O{sub 26}]{sup 11-} fragments

A S-shaped multi-iron substituted arsenotungstate [enH{sub 2}]{sub 2}[({alpha}-H{sub 2}As{sup V}W{sub 6}O{sub 26})Fe{sub 3}(H{sub 2}O)(B-{alpha}-H{sub 4}As{sup V}W{sub 9}O{sub 34})]{sub 2}[Fe]{sub 2}.8H{sub 2}O (1) (en=ethylenediamine) has been prepared by reaction of K{sub 14}[As{sub 2}{sup III}W{sub 19}O{sub 67}(H{sub 2}O)].nH{sub 2}O with Fe{sub 2}(SO{sub 4}){sub 3}.xH{sub 2}O under hydrothermal conditions and structurally characterized by elemental analyses, IR spectra, UV spectra, powder X-ray diffraction (PXRD) and single-crystal X-ray diffraction. The skeleton of 1 consists of two asymmetric sandwich-type subunits [({alpha}-H{sub 2}As{sup V}W{sub 6}O{sub 26})Fe{sub 3}(H{sub 2}O)(B-{alpha}-H{sub 4}As{sup V}W{sub 9}O{sub 34})]{sup 5-} linked by a di-Fe{sup III} cluster. Moreover, magnetic susceptibility measurements demonstrate that 1 indicates the antiferromagnetic coupling interactions within Fe{sup III} centers with the best-fitting set of parameters of J{sub 1}=-7.07 cm{sup -1}, J{sub 2}=-0.45 cm{sup -1} and g=2.05, which are generated by the addition of the expressions of the molar susceptibilities of two tri-Fe{sup III} clusters and one di-Fe{sup III} cluster derived from for spin pairs coupled through the isotropic exchange interactions. - Graphical abstract: S-shaped multi-iron substituted arsenotungstate consisting of two asymmetric sandwich-type subunits has been hydrothermally synthesized and structurally characterized. Its magnetic properties have been investigated. Highlights: > Multi-iron substituted arsenotungstate. > Symmetric sandwich-type subunits. > Antiferromagnetic coupling interactions within Fe{sup III} centers. > Hexavacant Keggin POM fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Birefringence imaging and orientation of laser patterned β-BaB{sub 2}O{sub 4} crystals with bending and curved shapes in glass

Nonlinear optical β-BaB{sub 2}O{sub 4} crystals (β-BBO) with bending and curved shapes were patterned at the surface of 8Sm{sub 2}O{sub 3}–42BaO–50B{sub 2}O{sub 3} glass by laser irradiations (Yb:YVO{sub 4} laser with a wavelength of 1080 nm, power of 0.8 W, and scanning speed of 4 μm/s), and the orientation state of β-BBO crystals was examined from the birefringence imaging obtained by polarization optical microscope (POM) observations. The formation (crystallization) of β-BBO crystals follows along laser scanning direction even if the laser scanning direction changes at a certain point within the bending angle of 60°. The birefringence images indicate that the formation of highly c-axis oriented β-BBO crystals follows along laser scanning direction even if the laser scanning direction changes, and in particular the direction of the c-axis of β-BBO crystals changes gradually at the bending point. The model for the orientation of the c-axis of β-BBO near the bending point is proposed. The present study proposes that the laser-induced crystallization opens a new door for the science and technology in crystal growth engineering. - Graphical abstract: This figure shows the birefringence images obtained by the Abrio IM imaging system (λ=546 nm) for the laser-patterned β-BaB{sub 2}O{sub 4} crystal line with the bending angle of 45° in the glass. The relation between the direction of slow axis and color is also shown. It is demonstrated that the formation (crystallization) of highly c-axis oriented β-BaB{sub 2}O{sub 4} crystals follows along laser scanning direction even if the laser scanning direction changes. Display Omitted - Highlights: • β-BaB{sub 2}O{sub 4} crystals with bending and curved shapes were patterned by laser irradiations. • The orientation was examined from the birefringence imaging. • Highly c-axis oriented crystals follows along laser scanning direction. • The c-axis direction changes gradually at the bending point. • The laser-induced crystallization opens a new door in crystal growth engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New 3-D coordination polymers based on semi-rigid V-shape tetracarboxylates

Under the hydrothermal conditions, the reactions of transition-metal salts, tetracarboxylic acids and N,N′-donor ligands yielded three new coordination polymers as [Cu{sub 4}(fph){sub 2}(bpe){sub 3}(H{sub 2}O){sub 2}]·2H{sub 2}O (fph=4,4′-(hexafluoroisopropylidene)diphthalate, bpe=1,2-bis(pyridyl)ethylene) 1, [Co{sub 2}(fph)(bpa){sub 2}(H{sub 2}O){sub 2}]·3H{sub 2}O (bpa=1,2-bis(pyridyl)ethylane) 2, and [Ni(H{sub 2}O)(H{sub 2}oph)(bpa)] (oph=4,4′-oxydiphthalate) 3. X-ray single-crystal diffraction analysis revealed that the title three compounds all possess the three-dimensional (3-D) network structures. For compound 1, the fph molecules first link the Cu{sup 2+} ions into a two-dimensional (2-D) wave-like layer with a (4,4) topology. The bpe molecules act as the second linkers, extending the 2-D layers into a 3-D network. For compound 2, the fph molecules still serve as the first connectors, linking the Co{sup 2+} ions into a one-dimensional (1-D) tube-like chain. Then the bpa molecules propagate the chains into a 3-D (4,4,4)-connected network. In the formation of the 3-D network of compound 3, the oph molecule does not play a role. The bpa molecules as well as the water molecules act as a mixed bridge. Only a kind of 4-connected metal node is observed in compound 3. The magnetic properties of compounds 1–3 were investigated and all exhibit the predominant antiferromegnetic magnetic behaviors. - Graphical abstract: Structures of three semi-rigid V-shape tetracarboxylate-based coordination polymers were reported, and their magnetic properties were investigated. - Highlights: • Structures of three tetracarboxylate-based coordination polymers were reported. • Role of organic bases in metal–tetracarboxylate compounds was discussed. • Characters of V-shape and semi-rigidity for tetracarboxylate play a key role in crystal growth. • Their magnetic properties were investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zn(II) coordination polymers with flexible V-shaped dicarboxylate ligand: Syntheses, helical structures and properties

Hydrothermal reactions of 2,2′-[hexafluoroisopropylidenebis(p-phenyleneoxy)]diacetic acid (H{sub 2}L) and zinc ions in the presence of N-donor ancillary ligands afford four novel coordination polymers, namely, [Zn{sub 2}(μ{sub 2}-OH)(μ{sub 4}-O){sub 0.5}(L)]·0.5H{sub 2}O (1), [Zn(L)(2,2′-bipy)(H{sub 2}O)] (2), [Zn{sub 3}(L){sub 3}(phen){sub 2}]·H{sub 2}O (3) and [Zn{sub 2}(L){sub 2}(4,4′-bipy)] (4) (2,2′-bipy=2,2′-bipyridine; 4,4′-bipy=4,4′-bipyridine; phen=1,10-phenanthroline). Their structures have been determined by single-crystal X-ray diffraction analyses, elemental analyses, IR spectra, powder X-ray diffraction (PXRD), and thermogravimetric (TG) analyses. Complex 1 shows a 3-D clover framework consisting of [Zn{sub 4}(µ{sub 4}-O)(µ{sub 2}-OH){sub 2}]{sup 4+} clusters, and exhibits a novel (3,8)-connected topological net with the Schläfli symbol of {3·4·5}{sub 2}{3"4·4"4·5"2·6"6·7"1"0·8"2}, and contains double-stranded and two kinds of meso-helices. 2 displays a helical chain structure, which is further extended via hydrogen bonds into a 3-D supramolecular structure with meso-helix chains. 3 displays a 2-D {4"4·6"2} parallelogram structure, which is further extended via hydrogen bonds into a 3-D supramolecular structure with single-stranded helical chains. 4 shows a 2-D {4"4·6"2} square structure with left- and right-handed helical chains. Moreover, the luminescent properties of 1–4 have been investigated. - Graphical abstract: Four new Zn(II) coordination polymers with helical structures based on flexible V-shaped dicarboxylate ligand have been synthesized and structurally characterized. Photoluminescent properties have been investigated. - Highlights: • Four novel Zn(II) coordination polymers with V-shaped ligand were characterized. • Complexes 1–4 show diverse intriguing helical characters. • Fluorescence properties of complexes 1–4 were investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of hot tearing of A206 aluminum alloy using Instrumented Constrained T-shaped Casting method

The hot tearing susceptibility of A206 aluminum alloy was investigated using Instrumented Constrained T-shaped Casting method and the effect of the casting temperature on hot tearing was studied. The Instrumented Constrained T-shaped Casting apparatus enabled real-time measurements of the contraction load developed in the casting and the temperature variations during solidification as a function of time. Critical temperatures and points during solidification of the castings were extracted from these data. The contraction load developed at the coalescence point of the castings was identified as a comparative criterion for predicting the hot tearing susceptibility of the alloys which could be utilized even when no visual tearing had occurred. The results showed that hot tearing susceptibility increased with the casting temperature. This was associated with reduced cooling rate, increased solute segregation and more localized hot spot formation at the T-junction area. Increase in the casting temperature also increased the grain size which may in turn have affected the initiation of the hot tears. The visual observations were further validated with radiographic tests.

36 MATERIALS SCIENCE↗