Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Selection optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Robust decentralized control laws for the ACES structure

Control system design for the Active Control Technique Evaluation for Spacecraft (ACES) structure at NASA Marshall Space Flight Center is discussed. The primary objective of this experiment is to design controllers that provide substantial reduction of the line-of-sight pointing errors. Satisfaction of this objective requires the controllers to attenuate beam vibration significantly. The primary method chosen for control design is the optimal projection approach for uncertain systems (OPUS). The OPUS design process allows the simultaneous tradeoff of five fundamental issues in control design: actuator sizing, sensor accuracy, controller order, robustness, and system performance. A brief description of the basic ACES configuration is given. The development of the models used for control design and control design for eight system loops that were selected by analysis of test data collected from the structure are discussed. Experimental results showing that very significant performance improvement is achieved when all eight feedback loops are closed are presented.

Collins, Emmanuel G., Jr.↗

A balanced submatrix merging algorithm for multiprocessor architectures

In this article, a parallel algorithm which applies Givens rotations to selectively annihilate k(k + 1)/2 nonzero elements from two k x n(k not more than n) upper trapezoidal submatrices is described. The new algorithm is suitable for implementation on either a pair of directly connected local-memory processors or two clusters of multiple tightly-coupled processors. Analyses show that in both cases the proposed algorithms achieve optimal speed-up by balancing the work load distribution and masking interprocessor or intercluster communication by computation if k is much small than n. In the context of solving large scale least squares problems, this submatrix merging step is repetitively needed during the entire computation and, furthermore, there are usually many pairs of such submatrices to be merged with each submatrix stored in the memory of a processor or a cluster of processors. The proposed algorithm can be applied to each pair of submatrices concurrently, and thus parallelizes an important step in solving the least squares problems.

Chu, Eleanor↗

Modulation of red cell mass by neocytolysis in space and on Earth

Astronauts predictably experience anemia after return from space. Upon entering microgravity, the blood volume in the extremities pools centrally and plasma volume decreases, causing plethora and erythropoietin suppression. There ensues neocytolysis, selective hemolysis of the youngest circulating red cells, allowing rapid adaptation to the space environment but becoming maladaptive on re-entry to a gravitational field. The existence of this physiologic control process was confirmed in polycythemic high-altitude dwellers transported to sea level. Pathologic neocytolysis contributes to the anemia of renal failure. Understanding the process has implications for optimizing erythropoietin-dosing schedules and the therapy of other human disorders. Human and rodent models of neocytolysis are being created to help find out how interactions between endothelial cells, reticuloendothelial phagocytes and young erythrocytes are altered, and to shed light on the expression of surface adhesion molecules underlying this process. Thus, unraveling a problem for space travelers has uncovered a physiologic process controlling the red cell mass that can be applied to human disorders on Earth.

Review, Tutorial↗

Antimicrobials for Water Systems in Manned Spaceflight - Past, Present, and Future Applications and Challenges

The use of antimicrobials to control microbiological growth in manned spaceflight water-based systems has and will continue to have a unique set of challenges and needs. The challenges are varied, and include antimicrobial effectiveness, crew health and safety, materials compatibility, optimal system functionality, antimicrobial shelf life, means to monitor antimicrobial concentration, and means to re-introduce biocides periodically in the case of depletion. Needs vary from application to application, and include control of pathogens for crew health, control of biofilm formation for optimal system functionality, inhibition and prevention of microbiologically influenced corrosion, optimization of wetted metallic material life, and general living quarter and consumable aesthetics with respect to odor and taste. This paper outlines and discusses the various antimicrobials used in prior and current manned spaceflight water-based applications with focus on pros, cons and lessons learned. Design factors such as minimum inhibitory concentration, minimum lethal concentration, required circulated concentrations, materials selection, means to introduce, means to monitor real-time, and concentration maintenance are discussed. The challenges associated with longer term missions, as well as long-term system dormancy as envisioned for exploration missions, lunar habitats, and a manned Mars mission are outlined with respect to anticipated needs and potential design solutions.

potable water↗

Mission analysis for a potential Mars Sample Return campaign in the 2020's

The Mars 2020 mission, currently under development by NASA, plans to acquire and cache carefully-selected rock and regolith samples from the surface of Mars for potential future return. NASA and ESA are jointly studying options for returning those samples to Earth with missions launching in the 2020s. This paper demonstrates a method for modeling the various campaign elements, synthesizing coordinated campaign timelines, and assuring trajectory feasibility in the presence of many constraints, and finally optimizing towards mission success. Options for complete sample return campaigns in multiple launch and arrival opportunities are explored and compared.

Huesing, Jakob↗

A model based technique for the design of flight directors

A new technique for designing flight directors is discussed. This technique uses the optimal-control pilot/vehicle model to determine the appropriate control strategy. The dynamics of this control strategy are then incorporated into the director control laws, thereby enabling the pilot to operate at a significantly lower workload. A preliminary design of a control director for maintaining a STOL vehicle on the approach path in the presence of random air turbulence is evaluated. By selecting model parameters in terms of allowable path deviations and pilot workload levels, a set of director laws is achieved which allows improved system performance at reduced workload levels. The pilot acts essentially as a proportional controller with regard to the director signals, and control motions are compatible with those appropriate to status-only displays.

Levison, W. H.↗

The design and application of nickel-cadmium batteries in space

This paper describes the considerations given to selection of 20 and 50 A h nickel-cadmium cells and batteries for NASA/Goddard's Solar Max and Landsat D missions. Results of cell and battery manufacturer testing and improvements in design required by NASA standard specifications are shown. Operation of three batteries in parallel using a single voltage limit/current taper charge control system is described along with suggestions for optimizing life and uniformity. The results of three years of in-orbit operation is presented.

Halpert, G.↗

Diagnosability-Based Sensor Placement through Structural Model Decomposition

Systems health management, and in particular fault diagnosis, is important for ensuring safe, correct, and efficient operation of complex engineering systems. The performance of an online health monitoring system depends critically on the available sensors of the system. However, the set of selected sensors is subject to many constraints, such as cost and weight, and hence, these sensors must be selected judiciously. This paper presents an offline design-time sensor placement approach for complex systems. Our diagnosis method is built upon the analysis of model-based residuals, which are computed using structural model decomposition. Sensor placement in this framework manifests as a residual selection problem, and we aim to find the set of residuals that achieves single-fault diagnosability of the system, uses the minimum number of sensors, and corresponds to the best model decomposition for the best distribution of the diagnosis system. We present a set of algorithms for solving this problem and compare their performance in terms of computational complexity and optimality of solutions. We demonstrate the approach using a benchmark multi-tank system.

Daigle, Matthew↗

Evolution of Trajectory Design Requirement of NASA's Planned Europa Clipper Mission

Europa is one of the most scientifically intriguing targets in planetary science due to its potential suitability for extant life. As such, NASA has funded the California Institute of Technology Jet Propulsion Laboratory and the Johns Hopkins University Applied Physics Laboratory to jointly develop the planned Europa Clipper mission—a multiple Europa flyby mission architecture aimed to thoroughly investigate the habitability of Europa and provide reconnaissance data to determine a landing site that maximizes the probability of both a safe landing and high scientific value for a potential future Europa lander. The trajectory design—a major enabling component for this Europa Clipper mission concept—was developed to maximize science from a set of eight model payload instruments determined by a NASA-appointed Europa Science Definition Team (SDT) between 2011-2015. On May 26, 2015, NASA officially selected 10 instruments from 6 different U.S. research facilities and universities. With the selection of instruments have come the development of new science measurement requirements, as well as a rich set of requirements stemming from project policies, planetary protection, and the evolved capability and characteristics of the flight system and mission operations system. This paper will focus on the evolution of requirements levied on the trajectory design, discuss strategies and solutions to the multidimensional optimization problem of designing high fidelity end-to-end trajectories that maximize Europa science while mitigating mission risk, complexity and cost, and last, verification of candidate trajectories to meet the requirements on the trajectory design.

Buffington, Brent↗

Use of Design of Experiments and Rule-Based Inference in Determining Neural Network Architectures for Loss of Control Detection

In this work, we describe methods for selecting the neural network architectures and input spaces to implement belief state inference on generic commercial transport aircraft. First, we highlight a case study on the planning, execution, and analysis of a set of experiments to determine the configurations of a conditional variational autoencoder (CVAE). We present a structured method that can be used in a number of aerospace applications, to optimize the structure and training parameters of the CVAE for belief state inference, using Design of Experiments (DOE) statistical methodologies. The motivation for this specific DOE was to identify the appropriate hyperparameters for measuring the CVAE reconstruction probability and latent space, such that the measurements can be used to infer qualitative state changes for the aircraft. We demonstrate that this process yields information about a trained neural network’s utility for this specific application, along with a quantifiable range of certainty. We execute 84 experiments using loss-of-control flight maneuver data from a NASA T-2 aircraft, demonstrating that this empirical process allows us to construct cheap and simple models with specific attributes amenable to belief state inference in aerospace applications. While theoretically, we could create a single CVAE with an input space the size of all measurable flight variables and environmental dynamics, it becomes intractable to use such a neural network in an in-situ intelligent multi-agent system. Using the recommendations from our case study, we introduce a technical approach for feasibly describing the belief space by (1) identifying significant statistical relationships among flight variables using rule induction, (2) using a set of rules that cover all features to define the input space of multiple CVAEs, and (3) forming a belief space based on the joint probability density of their collective latent spaces. This results in a series of relatively small matrix multiplications that can be performed in real time, as opposed to large matrix computations in a single CVAE. We demonstrate the application of this approach on the T-2 flight loss-of control experiments, using the architecture and hyperparameter recommendations from the case study. We compare the utilities of an individual CVAE trained on all flight variables and multiple CVAEs defined on subsets of flight variables for detecting qualitative changes in flight. We demonstrate that the use of multiple CVAEs with smaller input spaces permits the CVAE to capture more granular relationships in the latent space, permitting better state space characterization and loss-of-control detection.

Design of experiments↗

Investigation of storage system designs and techniques for optimizing energy conservation in integrated utility systems. Volume 2: (Application of energy storage to IUS)

The applicability of energy storage devices to any energy system depends on the performance and cost characteristics of the larger basic system. A comparative assessment of energy storage alternatives for application to IUS which addresses the systems aspects of the overall installation is described. Factors considered include: (1) descriptions of the two no-storage IUS baselines utilized as yardsticks for comparison throughout the study; (2) discussions of the assessment criteria and the selection framework employed; (3) a summary of the rationale utilized in selecting water storage as the primary energy storage candidate for near term application to IUS; (4) discussion of the integration aspects of water storage systems; and (5) an assessment of IUS with water storage in alternative climates.

Source record↗

A methodology for commonality analysis, with applications to selected space station systems

The application of commonality in a system represents an attempt to reduce costs by reducing the number of unique components. A formal method for conducting commonality analysis has not been established. In this dissertation, commonality analysis is characterized as a partitioning problem. The cost impacts of commonality are quantified in an objective function, and the solution is that partition which minimizes this objective function. Clustering techniques are used to approximate a solution, and sufficient conditions are developed which can be used to verify the optimality of the solution. This method for commonality analysis is general in scope. It may be applied to the various types of commonality analysis required in the conceptual, preliminary, and detail design phases of the system development cycle.

Thomas, Lawrence Dale↗

Application of modern control theory to the design of optimum aircraft controllers

A procedure is described for synthesis of optimal aircraft control systems by application of the concepts of optimal control theory to time-invariant linear systems with quadratic performance criteria. Essential in this synthesis procedure is the solution of the Riccati matrix equation which results in a constant linear feedback control law for an output regulator which maintains a plant in an equilibrium in the presence of impulse disturbances. An algorithm is derived for designing maneuverable output regulators with selected state variables for feedback.

Power, L. J.↗

The 1st generation low cost point focus solar concentrator

A point focus solar concentrator that, given a high volume of production, will optimize the ratio of performance to cost is considered. The concentrator design approach has evolved by a systematic process of examining the operating requirements particular to the solar application, minimizing material content through detail structural design and structurally efficient subsystem features, and utilizing materials and processes compatible with high volume production techniques. The design approach, the rationale for the configuration and subsystem selections, and the development status are described.

Zimmerman, J.↗

Transformation toughened ceramics for the heavy duty diesel engine technology program, phase 2

The objective of this program is to develop an insulating structural ceramic for application in a heavy duty adiabatic diesel engine. The approach is to employ transformation toughening (TT) by additions of zirconia-hafnia solid solution (ZHSS). The feasibility of using ZHSS as a toughening agent in mullite and alumina has been demonstrated in Phase 1 of this work. Based on Phase 1 results, a decision was made to concentrate the Phase 2 effort on process optimization of the TT mullite. A strong factor in that decision was the low thermal conductivity and high thermal shock resistance of the mullite. Results of the Phase 2 effort indicate that optimum toughening of mullite by additions of ZHSS is difficult to achieve due to apparent sensitivity to morphology. The 48 ksi room temperature modulus-of-rupture (MOR) achieved in selected specimens is approximately 50% of the original strength target. The MOR deteriorated to 34 ksi at 800 C.

Musikant, S.↗

Reduced-dynamic technique for precise orbit determination of low earth satellites

A reduced-dynamic technique for precise orbit determination of low earth satellites is described. This technique optimally combines the conventional dynamic technique with the nondynamic technique which uses differential GPS continuous carrier phase to define the state transition. A Kalman filter formulation for this reduced-dynamic technique is given. A covariance analysis shows that when neither the dynamic nor the nondynamic technique is clearly superior, the reduced-dynamic technique appreciably improves the orbit accuracy. Guidelines for selecting a near-optimum weighting for the combination are given. Sensitivity to suboptimal weighting is assessed.

Wu, Sien-Chong↗

An 834 A reflective coating for magnetospheric imagery applications

We have designed a multiple-layer coating which selectively reflects 834 A radiation and suppresses 1025 A and 1216 A radiation. The structure of the coating material consists of a very thin (50-150 A) metal (nickel) layer, on top of a semitransparent dielectric material (magnesium fluoride), over an aluminum substrate. Three such coatings were produced at NASA Goddard Space Flight Center using an existing coating facility which is not optimized for thin coatings. In spite of such fabrication difficulties, we have obtained encouraging results.

Chakrabarti, Supriya↗

An Atomistic Simulation of Crack Propagation in a Nickel Single Crystal

The main objective of this paper is to determine mechanisms of crack propagation in a nickel single crystal. Motivation for selecting nickel as a case study is because we believe that its physical properties are very close to that of nickel-base super alloy. We are directed in identifying some generic trends that would lead a single crystalline material to failure. We believe that the results obtained here would be of interest to the experimentalists in guiding them to a more optimized experimental strategy. The dynamic crack propagation experiments are very difficult to do. We are partially motivated to fill the gap by generating the simulation results in lieu of the experimental ones for the cases where experiment can not be done or when the data is not available.

Majid Karimi↗