Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Laser-induced modification of graphene in the presence of ethanol on a graphene – substrate interface

We have studied the effect that the substitution of an organic substance (ethanol) for water adsorbate on a CVD graphene–SiO{sub 2}/Si interface has on the laser-induced modification of graphene and graphene structures on the SiO{sub 2} film. Scanning probe microscopy has been used to analyse changes in the electronic properties of graphene structures on a hydrophilic substrate in the presence of ethanol and as a result of a laser-induced spatial redistribution of a water–alcohol adsorbate on the interface. It has been demonstrated experimentally that ethanol substitution for water adsorbate leads to an increase in the surface potential of the graphene, which is equivalent to a reduction in its work function with respect to the original level under normal conditions at a relative humidity of air from 30% to 60%. In the laser irradiation zone, we observe an additional increase in surface potential by 30–50 mV. Thus, ethanol makes it possible to tune the laser-induced electronic properties of graphene on a substrate. In addition, it has been shown that the intercalation of ethanol molecules leads to severe temporal instability of the physical properties of graphene structures produced by local laser irradiation. We have demonstrated the possibility of information ‘rewriting’ by low-intensity laser pulses in microregions with a changed surface potential in the presence of ethanol. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modification of a graphene – copper substrate in vacuum by femtosecond laser radiation

The effect of intense femtosecond laser radiation on single-layer graphene fixed on a copper fine-meshed grid is studied using a compact femtosecond electron diffractometer. A modification of the graphene – copper substrate is found. The composition of the resulting compounds is analysed. It is shown that the main new products are copper oxides. The prospects of using such a substrate in the method of ultrafast electron diffraction and microscopy are analysed. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NHC-based Self-assembled Monolayers on Solid Gold Substrates

Thin films of 1,3-diethylbenzimidazol-2-ylidene (BIEt) were fabricated from THF solution on solid gold substrates and characterised by high-resolution X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopy. The surface-analytical data are in accord with the formation of self-assembled monolayers of BIEt molecules exhibiting an approximately vertical orientation on the substrate. The crystal structure of (BIEt){sub 2} was also determined.

36 MATERIALS SCIENCE↗

Evolution of Substrate Specificity within a Diverse Family of [beta/alpha]-Barrel-fold Basic Amino Acid Decarboxylases X-ray Structure Determination of Enzymes with Specificity for L-Arginine and Carboxynorspermidine

Pyridoxal 5{prime}-phosphate (PLP)-dependent basic amino acid decarboxylases from the {beta}/{alpha}-barrel-fold class (group IV) exist in most organisms and catalyze the decarboxylation of diverse substrates, essential for polyamine and lysine biosynthesis. Herein we describe the first x-ray structure determination of bacterial biosynthetic arginine decarboxylase (ADC) and carboxynorspermidine decarboxylase (CANSDC) to 2.3- and 2.0-{angstrom} resolution, solved as product complexes with agmatine and norspermidine. Despite low overall sequence identity, the monomeric and dimeric structures are similar to other enzymes in the family, with the active sites formed between the {beta}/{alpha}-barrel domain of one subunit and the {beta}-barrel of the other. ADC contains both a unique interdomain insertion (4-helical bundle) and a C-terminal extension (3-helical bundle) and it packs as a tetramer in the asymmetric unit with the insertions forming part of the dimer and tetramer interfaces. Analytical ultracentrifugation studies confirmed that the ADC solution structure is a tetramer. Specificity for different basic amino acids appears to arise primarily from changes in the position of, and amino acid replacements in, a helix in the {beta}-barrel domain we refer to as the 'specificity helix.' Additionally, in CANSDC a key acidic residue that interacts with the distal amino group of other substrates is replaced by Leu{sup 314}, which interacts with the aliphatic portion of norspermidine. Neither product, agmatine in ADC nor norspermidine in CANSDC, form a Schiff base to pyridoxal 5{prime}-phosphate, suggesting that the product complexes may promote product release by slowing the back reaction. These studies provide insight into the structural basis for the evolution of novel function within a common structural-fold.

59 BASIC BIOLOGICAL SCIENCES↗

Bacillus anthracis Prolyl 4-Hydroxylase Modifies Collagen-like Substrates in Asymmetric Patterns

Proline hydroxylation is the most prevalent post-translational modification in collagen. The resulting product trans-4-hydroxyproline (Hyp) is of critical importance for the stability and thus function of collagen, with defects leading to several diseases. Prolyl 4-hydroxylases (P4Hs) are mononuclear non-heme iron α-ketoglutarate (αKG)-dependent dioxygenases that catalyze Hyp formation. Although animal and plant P4Hs target peptidyl proline, prokaryotes have been known to use free L -proline as a precursor to form Hyp. The P4H from Bacillus anthracis (BaP4H) has been postulated to act on peptidyl proline in collagen peptides, making it unusual within the bacterial clade, but its true physiological substrate remains enigmatic. Here we use mass spectrometry, fluorescence binding, x-ray crystallography, and docking experiments to confirm that BaP4H recognizes and acts on peptidyl substrates but not free l -proline, using elements characteristic of an Fe(II)/αKG-dependent dioxygenases. We further show that BaP4H can hydroxylate unique peptidyl proline sites in collagen-derived peptides with asymmetric hydroxylation patterns. We note the cofactor-bound crystal structures of BaP4H reveal active site conformational changes that define open and closed forms and mimic “ready” and “product-released” states of the enzyme in the catalytic cycle. These results help to clarify the role of BaP4H as well as provide broader insights into human collagen P4H and proteins with poly- L -proline type II helices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Structure of Biotin Carboxylase in Complex with Substrates and Implications for Its Catalytic Mechanism

Biotin-dependent carboxylases are widely distributed in nature and have important functions in many cellular processes. These enzymes share a conserved biotin carboxylase (BC) component, which catalyzes the ATP-dependent carboxylation of biotin using bicarbonate as the donor. Despite the availability of a large amount of biochemical and structural information on BC, the molecular basis for its catalysis is currently still poorly understood. We report here the crystal structure at 2.0 {angstrom} resolution of wild-type Escherichia coli BC in complex with its substrates biotin, bicarbonate, and Mg-ADP. The structure suggests that Glu{sup 296} is the general base that extracts the proton from bicarbonate, and Arg{sup 338} is the residue that stabilizes the enolate biotin intermediate in the carboxylation reaction. The B domain of BC is positioned closer to the active site, leading to a 2-{angstrom} shift in the bound position of the adenine nucleotide and bringing it near the bicarbonate for catalysis. One of the oxygen atoms of bicarbonate is located in the correct position to initiate the nucleophilic attack on ATP to form the carboxyphosphate intermediate. This oxygen is also located close to the N1' atom of biotin, providing strong evidence that the phosphate group, derived from decomposition of carboxyphosphate, is the general base that extracts the proton on this N1' atom. The structural observations are supported by mutagenesis and kinetic studies. Overall, this first structure of BC in complex with substrates offers unprecedented insights into the molecular mechanism for the catalysis by this family of enzymes.

36 MATERIALS SCIENCE↗

Ferroelectric Domain Scaling and Switching in Ultrathin BiFeO3 Films Deposited on Vicinal Substrates

We report on electrically switchable polarization and ferroelectric domain scaling over a thickness range of 5-100 nm in BiFeO{sub 3} films deposited on [110] vicinal substrates. The BiFeO{sub 3} films of variable thickness were deposited with SrRuO{sub 3} bottom layer using the pulsed laser deposition technique. The domains are engineered into preferentially oriented patterns due to substrate vicinality along the [110] direction. The domain width scales closely with the square root of film thickness, in agreement with the Landau-Lifschitz-Kittel (LLK) law. Switching spectroscopy piezo-response force microscopy provides clear evidence for the ferroelectric switching behavior in all the films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel {alpha}-glucosidase from human gut microbiome : substrate specificities and their switch.

The human intestine harbors a large number of microbes forming a complex microbial community that greatly affects the physiology and pathology of the host. In the human gut microbiome, the enrichment in certain protein gene families appears to be widespread. They include enzymes involved in carbohydrate metabolism such as glucoside hydrolases of dietary polysaccharides and glycoconjugates. We report the crystal structures (wild type, 2 mutants, and a mutant/substrate complex) and the enzymatic activity of a recombinant {alpha}-glucosidase from human gut bacterium Ruminococcus obeum. The first ever protein structures from this bacterium reveal a structural homologue to human intestinal maltase-glucoamylase with a highly conserved catalytic domain and reduced auxiliary domains. The {alpha}-glucosidase, a member of GH31 family, shows substrate preference for {alpha}(1-6) over {alpha}(1-4) glycosidic linkages and produces glucose from isomaltose as well as maltose. The preference can be switched by a single mutation at its active site, suggestive of widespread adaptation to utilization of a variety of polysaccharides by intestinal micro-organisms as energy resources. Novel {alpha}-glucosidase from human gut microbiome: substrate specificities and their switch.

36 MATERIALS SCIENCE↗

The Influence of Anisotropic Strain on the Dielectric and Ferroelectric Properties of SrTiO3 Thin Films on DyScO3 Substrates

The in-plane dielectric and ferroelectric properties of coherent anisotropically strained SrTiO{sub 3} thin films grown on orthorhombic (101) DyScO{sub 3} substrates were examined as a function of the angle between the applied electric field and the principal directions of the substrate. The dielectric permittivity revealed two distinct maxima as a function of temperature along the [100]{sub p} and [010]{sub p} SrTiO{sub 3} pseudocubic directions. These data, in conjunction with optical second-harmonic generation, show that the switchable ferroelectric polarization develops first predominantly along the in-plane axis with the larger tensile strain before developing a polarization component along the perpendicular direction with smaller strain as well, leading to domain twinning at the lower temperature. Finally, weak signatures in the dielectric and second-harmonic generation response were detected at the SrTiO{sub 3} tilt transition close to 165 K. These studies indicate that anisotropic biaxial strain can lead to new ferroelectric domain reorientation transitions that are not observed in isotropically strained films.

36 MATERIALS SCIENCE↗

Graphene on Pt(111): Growth and Substrate interaction

In situ low-energy electron microscopy (LEEM) of graphene growth combined with measurements of the graphene structure and electronic band structure has been used to study graphene on Pt(111). Growth by carbon segregation produces macroscopic monolayer graphene domains extending continuously across Pt(111) substrate steps and bounded by strongly faceted edges. LEEM during cooling from the growth temperature shows the propagation of wrinkles in the graphene sheet, driven by thermal stress. The lattice mismatch between graphene and Pt(111) is accommodated by moire structures with a large number of different rotational variants, without a clear preference for a particular interface geometry. Fast and slow growing graphene domains exhibit moire structures with small [e.g., (3 x 3){sub G}, ({radical}6 x {radical}6)R2{sub G}, and (2 x 2)R4{sub G}] and large unit cells [e.g., ({radical}44 x {radical}44)R15{sub G}, ({radical}52 x {radical}52)R14{sub G}, and (8 x 8){sub G}], respectively. A weak substrate coupling, suggested by the growth and structural properties of monolayer graphene on Pt(111), is confirmed by maps of the band structure, which is close to that of isolated graphene aside from minimal hole doping due to charge transfer from the metal. Finally, the decoupled graphene monolayer on Pt(111) appears impenetrable to carbon diffusion, which self-limits the graphene growth at monolayer thickness. Thicker graphene domains, which can form at boundaries between monolayer domains, have been used to characterize the properties of few-layer graphene on Pt(111).

36 MATERIALS SCIENCE↗

Use of a hexapod in diffraction measurements of substrate supported crystals of organic semiconductors

Thin films of organic semiconductor prepared on substrates generally contain crystals that have one common crystal plane parallel to the substrate but random in-plane orientations. In diffraction measurements of these structures, it is often required to anchor the X-ray beam on a fixed spot on the sample, such as an optically visible crystallite or island. Here, a hexapod is used in place of a traditional multi-circle diffractometer to perform area-detector-based diffraction measurements on an actual device that contains 6,13-bis(triisopropylsilyethynyl)-pentacene (TIPS-pentacene) crystals. The hexapod allows for sample rotations about any user-defined rotation center. Two types of complex sample motions have been programmed to characterize the structure of the TIPS-pentacene crystal: an in-plane powder average has been performed at a fixed grazing-incident angle to determine the lattice parameters of the crystal; then the in-plane component of the scattering vector was continuously rotated in transmission geometry to determine the local crystal orientation.

47 OTHER INSTRUMENTATION↗

Site 2 of the Yersinia pestis substrate-binding protein YfeA is a dynamic surface metal-binding site

The substrate-binding protein YfeA (also known as YPO2439 or y1897) is a polyspecific metal-binding protein that is crucial for nutrient acquisition and virulence in Yersinia pestis, the causative microbe of plague. YfeA folds into a monomeric c-clamp like other substrate-binding proteins and has two metal-binding sites (sites 1 and 2). Site 2 is a bidentate surface site capable of binding Zn and Mn atoms and is a unique feature of YfeA. Occasionally, the site 2 residues of two YfeA molecules will cooperate with the histidine tag of a third YfeA molecule in coordinating the same metal and lead to metal-dependent crystallographic packing. Here, three crystal structures of YfeA are presented at 1.85, 2.05 and 2.25 Å resolution. A comparison of the structures reveals that the metal can be displaced at five different locations ranging from ~4 to ~16 Å away from the canonical site 2. These observations reveal different configurations of site 2 that enable cooperative metal binding and demonstrate how site 2 is dynamic and freely available for inter-protein metal coordination.

59 BASIC BIOLOGICAL SCIENCES↗

Comparison of Minority Carrier Lifetime Measurements in Superstrate and Substrate CdTe PV Devices

We discuss typical and alternative procedures to analyze time-resolved photoluminescence (TRPL) measurements of minority carrier lifetime (MCL) with the hope of enhancing our understanding of how this technique may be used to better analyze CdTe photovoltaic (PV) device functionality. Historically, TRPL measurements of the fast recombination rate (t{sub 1}) have provided insightful correlation with broad device functionality. However, we have more recently found that t{sub 1} does not correlate as well with smaller changes in device performance, nor does it correlate well with performance differences observed between superstrate and substrate CdTe PV devices. This study presents TRPL data for both superstrate and substrate CdTe devices where both t{sub 1} and the slower TRPL decay (t{sub 2}) are analyzed. The study shows that changes in performance expected from small changes in device processing may correlate better with t{sub 2}. Numerical modeling further suggests that, for devices that are expected to have similar drift field in the depletion region, effects of changes in bulk MCL and interface recombination should be more pronounced in t{sub 2}. Although this technique may provide future guidance to improving CdS/CdTe device performance, it is often difficult to extract statistically precise values for t{sub 2}, and therefore t{sub 2} data may demonstrate significant scatter when correlated with performance parameters.

14 SOLAR ENERGY↗

Nanoscale Investigation of Grain Boundary Characteristics of Single-Crystalline-Like GaAs Films and Solar Cells on Flexible Metal Substrates

High-resolution imaging with nanometer spatial resolution was carried out to unravel the grain and grain boundary (GB) properties of single-crystalline-like n-type GaAs films and single-junction solar cells on epi-ready flexible metal substrates. Electron Back Scattered Diffraction studies revealed ultra-low angle GBs with the presence of twin boundaries. The pn junction carrier collection properties were directly imaged using cross-sectional Electron Beam Induced Current measurements. Low-temperature Cathodoluminescence imaging indicated a strong component of optical emission from the GBs. Comprehensive studies of the structural, chemical, optical and electrical properties were carried out to unravel the fundamental GB properties of flexible GaAs films on metal substrates.

14 SOLAR ENERGY↗

Influence of seed layers on the vertical growth of ZnO nanowires by low-temperature wet chemical bath deposition on ITO-coated glass substrate

Aligned ZnO nanowires (NWs) were synthesized by low-temperature wet chemical bath deposition (CBD) technique on indium tin oxide (ITO)-coated glass substrates using c-axis orientated ZnO and AZO (Al-doped ZnO) seed layers through the RF sputtering deposition process under different conditions. The growth direction of ZnO NW was controlled by using the two different seed layers. Results showed single-crystalline structure of the ZnO NWs with the highest peak intensity in (002) crystalline direction. In addition, NWs seeding form AZO layer, grown on ITO coated glass, were vertically aligned and uniformly distributed on the substrate. The effects of precursor concentration, growth temperature, and seed layer on NW morphology were investigated in two different seed layers systematically. The intensity of broad emissions at 500–600 nm emission was observed in room temperature photoluminescence (PL) spectra for samples prepared under optimized parameters. In addition, the green emission intensity of ZnO NWs growth on the ZnO seed layer was much weaker than that of AZO seed layer. The experimental results indicate that the selection of seed layers, precursor concentration, and the growth temperature are key parameters to vertical growth of NWs for the application of nanoscale devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improved optical and electrical properties of rf sputtered Al doped ZnO films on polymer substrates by low-damage processes

Three types of low-damage radio-frequency (rf) magnetron sputtering processes--an interruptive process, a rotating cylindrical holder method, and an off-axis sputtering method--were designed and studied to reduce the film surface temperature during deposition. Low-damage sputtering processes were investigated to improve the resistivity and optical transmittance in the visible range of Al doped ZnO (AZO) thin films deposited on polymer substrates. In the case of the polyethersulfone substrate, AZO films with a resistivity of 1.0x10{sup -3} {omega} cm and an optical transmittance of 75% were obtained by the rotating repeat holder method during rf sputtering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature grown polycrystalline La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films on amorphous SiO{sub 2} substrates by rf magnetron sputtering

The La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films have been prepared on amorphous SiO{sub 2} substrates by a rf magnetron sputtering technique under various oxygen flow rates and rf powers at a relatively low substrate temperature of 350 deg. C. The effects of oxygen flow rate and rf power on their physical properties were systematically investigated. X-ray diffraction results show that the growth orientation and crystallinity of the films were affected by rf power and oxygen flow rate. The electrical resistivity of the films was reduced with increasing oxygen flow rate and rf power due to enhanced {l_brace}100{r_brace} growth plane orientation and enlarged grain size of the films. In addition, a relatively high temperature coefficient of resistance value of -2.4% was obtained in the present investigation even with low deposition temperature.

36 MATERIALS SCIENCE↗

Flexible indium zinc oxide/Ag/indium zinc oxide multilayer electrode grown on polyethersulfone substrate by cost-efficient roll-to-roll sputtering for flexible organic photovoltaics

The authors describe the preparation and characteristics of flexible indium zinc oxide (IZO)-Ag-IZO multilayer electrodes grown on flexible polyethersulfone (PES) substrates using a roll-to-roll sputtering system for use in flexible organic photovoltaics. By the continuous roll-to-roll sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, they were able to fabricate a high quality IZO-Ag-IZO multilayer electrode with a sheet resistance of 6.15 {epsilon}/square, optical transmittance of 87.4%, and figure of merit value of 42.03x10{sup -3} {Omega}{sup -1} on the PES substrate. In addition, the IZO-Ag-IZO multilayer electrode exhibited superior flexibility to the roll-to-roll sputter grown single ITO electrode due to the existence of a ductile Ag layer between the IZO layers and stable amorphous structure of the IZO film. Furthermore, the flexible organic solar cells (OSCs) fabricated on the roll-to-roll sputter grown IZO-Ag-IZO electrode showed higher power efficiency (3.51%) than the OSCs fabricated on the roll-to-roll sputter grown single ITO electrode (2.67%).

14 SOLAR ENERGY↗