Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Realizability Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Investigation of Natural Circulation Instability and Transients in Passively Safe Small Modular Reactors

The NEUP funded project, NEUP-3496, aims to experimentally investigate two-phase natural circulation flow instability that could occur in Small Modular Reactors (SMRs), especially for natural circulation SMRs. The objective has been achieved by systematically performing tests to study the general natural circulation instability characteristics and the natural circulation behavior under start-up or design basis accident conditions. Experimental data sets highlighting the effect of void reactivity feedback as well as the effect of power ramp-up rate and system pressure have been used to develop a comprehensive stability map. The safety analysis code, RELAP5, has been used to evaluate experimental results and models. Improvements to the constitutive relations for flashing have been made in order to develop a reliable analysis tool. This research has been focusing on two generic SMR designs, i.e. a small modular Simplified Boiling Water Reactor (SBWR) like design and a small integral Pressurized Water Reactor (PWR) like design. A BWR-type natural circulation test facility was firstly built based on the three-level scaling analysis of the Purdue Novel Modular Reactor (NMR) with an electric output of 50 MWe, namely NMR-50, which represents a BWR-type SMR with a significantly reduced reactor pressure vessel (RPV) height. The experimental facility was installed with various equipment to measure thermalhydraulic parameters such as pressure, temperature, mass flow rate and void fraction. Characterization tests were performed before the startup transient tests and quasi-steady tests to determine the loop flow resistance. The control system and data acquisition system were programmed with LabVIEW to realize the realtime control and data storage. The thermal-hydraulic and nuclear coupled startup transients were performed to investigate the flow instabilities at low pressure and low power conditions for NMR-50. Two different power ramps were chosen to study the effect of startup power density on the flow instability. The experimental startup transient results showed the existence of three different flow instability mechanisms, i.e., flashing instability, condensation induced flow instability, and density wave oscillations. In addition, the void-reactivity feedback did not have significant effects on the flow instability during the startup transients for NMR-50. ii Several initial startup procedures with different power ramp rates were experimentally investigated to eliminate the flow instabilities observed from the startup transients. Particularly, the very slow startup transient and pressurized startup transient tests were performed and compared. It was found that the very slow startup transients by applying very small power density can eliminate the flashing oscillations in the single-phase natural circulation and stabilize the flow oscillations in the phase of net vapor generation. The initially pressurized startup procedure was tested to eliminate the flashing instability during the startup transients as well. The pressurized startup procedure included the initial pressurization, heat-up, and venting process. The startup transient tests showed that the pressurized startup procedure could eliminate the flow instability during the transition from single-phase flow to two-phase flow at low pressure conditions. The experimental results indicated that both startup procedures were applicable to the initial startup of NMR. However, the pressurized startup procedures might be preferred due to short operating hours required. In order to have a deeper understanding of natural circulation flow instability, the quasi-steady tests were performed using the test facility installed with preheater and subcooler. The effect of system pressure, core inlet subcooling, core power density, inlet flow resistance coefficient, and void reactivity feedback were investigated in the quasi-steady state tests. The experimental stability boundaries were determined between unstable and stable flow conditions in the dimensionless stability plane of inlet subcooling number and Zuber number. To predict the stability boundary theoretically, linear stability analysis in the frequency domain was performed at four sections of the natural circulation test loop. The flashing phenomena in the chimney section was considered as an axially uniform heat source. And the dimensionless characteristic equation of the pressure drop perturbation was obtained by considering the void fraction effect and outlet flow resistance in the core section. The theoretical flashing boundary showed some discrepancies with previous experimental data from the quasi-steady state tests. In the future, thermal non-equilibrium was recommended to improve the accuracy of flashing instability boundary. As another part of the funded research, flow instabilities of a PWR-type SMR under low pressure and low power conditions were investigated experimentally as well. The NuScale reactor design was selected as the prototype for the PWR-type SMR. In order to experimentally study the natural circulation behavior of NuScale iii reactor during accidental scenarios, detailed scaling analyses are necessary to ensure that the scaled phenomena could be obtained in a laboratory test facility. The three-level scaling method is used as well to obtain the scaling ratios derived from various non-dimensional numbers. The design of the ideally scaled facility (ISF) was initially accomplished based on these scaling ratios. Then the engineering scaled facility (ESF) was designed and constructed based on the ISF by considering engineering limitations including laboratory space, pipe size, and pipe connections etc. PWR-type SMR experiments were performed in this well-scaled test facility to investigate the potential thermal hydraulic flow instability during the blowdown events, which might occur during the loss of coolant accident (LOCA) and loss of heat sink accident (LOHS) of the prototype PWR-type SMR. Two kinds of experiments, normal blowdown event and cold blowdown event, were experimentally investigated and compared with code predictions. The normal blowdown event was experimentally simulated since an initial condition where the pressure was lower than the designed pressure of the experiment facility, while the code prediction of blowdown started from the normal operation condition. Important thermal hydraulic parameters including reactor pressure vessel (RPV) pressure, containment pressure, local void fraction and temperature, pressure drop and natural circulation flow rate were measured and analyzed during the blowdown event. The pressure and water level transients are similar to the experimental results published by NuScale [51], which proves the capability of current loop in simulating the thermal hydraulic transient of real PWR-type SMR. During the 20000s blowdown experiment, water level in the core was always above the active fuel assemble during the experiment and proved the safety of natural circulation cooling and water recycling design of PWR-type SMR. Besides, pressure, temperature, and water level transient can be accurately predicted by RELAP5 code. However, the oscillations of natural circulation flow rate, water level and pressure drops were observed during the blowdown transients. This kind of flow oscillations are related to the water level and the location upper plenum, which is a path for coolant flow from chimney to steam generator and down comer. In order to investigate the transients start from the opening of ADS valve in both experimental and numerical way, the cold blow-down experiment is conducted. For the cold blowdown event, different from setting both reactor iv pressure vessel (RPV) and containment at high temperature and pressure, only RPV was heated close to the highest designed pressure and then open the ADS valve, same process was predicted using RELAP5 code. By doing cold blowdown experiment, the entire transients from the opening of ADS can be investigated by code and benchmarked with experimental data. Similar flow instability observed in the cold blowdown experiment. The comparison between code prediction and experiment data showed that the RELAP5 code can successfully predict the pressure void fraction and temperature transient during the cold blowdown event with limited error, but numerical instability exists in predicting natural circulation flow rate. Besides, the code is lack of capability in predicting the water level related flow instability observed in experiments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Multilayer DNA Origami with Terminal Interfaces That Are Flat and Wide-Area

DNA origami is a popular nanofabrication strategy that employs self-assembly of a long single scaffold strand, typically less than 10 kilobases in length, with hundreds of shorter staple strands into a desired shape. In particular, origami arranged as a single-layer rectangle has proven popular as flat pegboards that can display functionalities at staple-strand breakpoints, off the sides of the constituent double helices, with a ~5.3 nm rhombic-lattice spacing. For applications that demand tighter spacing, functionalities can be displayed instead on the termini of helices of multilayer DNA origami. However, pegboards with the greatest addressable surface area are often found to be the most versatile. Given the practical limitations of the length of the scaffold that can be easily realized, designs that minimize the length of each helix would have advantages for maximizing the number of helices and therefore the number of addressable pixels on each terminal surface. Here we present an architecture for multilayer DNA origami displaying flush terminal interfaces from over 200 helices that each are only 5.3 turns in length. As a result, we characterize an example using cryo-EM imaging paired with single-particle analysis for further analysis of the global structure.

59 BASIC BIOLOGICAL SCIENCES↗

Antisite defect qubits in monolayer transition metal dichalcogenides

Abstract Being atomically thin and amenable to external controls, two-dimensional (2D) materials offer a new paradigm for the realization of patterned qubit fabrication and operation at room temperature for quantum information sciences applications. Here we show that the antisite defect in 2D transition metal dichalcogenides (TMDs) can provide a controllable solid-state spin qubit system. Using high-throughput atomistic simulations, we identify several neutral antisite defects in TMDs that lie deep in the bulk band gap and host a paramagnetic triplet ground state. Our in-depth analysis reveals the presence of optical transitions and triplet-singlet intersystem crossing processes for fingerprinting these defect qubits. As an illustrative example, we discuss the initialization and readout principles of an antisite qubit in WS 2 , which is expected to be stable against interlayer interactions in a multilayer structure for qubit isolation and protection in future qubit-based devices. Our study opens a new pathway for creating scalable, room-temperature spin qubits in 2D TMDs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semi-Dirac semimetal in silicene oxide

A semi-Dirac semimetal is a material that exhibits linear band dispersion in one direction and quadratic band dispersion in the orthogonal direction and, therefore, hosts massless and massive fermions at the same point in the momentum space. While a number of interesting physical properties have been predicted in semi-Dirac semimetals, it has been rare to realize such materials in condensed matter. Based on the fact that some honeycomb materials are easily oxidized or chemically absorb other atoms, here, we theoretically propose an approach of modifying their band structures by covalent addition of group-VI elements and strain engineering. We predict a silicene oxide with the chemical formula of Si 2 O to be a candidate semi-Dirac semimetal. Our approach is backed by the analysis and understanding of the effect of p-orbital frustration on the band structure of graphene-like materials.

Zhong, Chengyong↗

Effect of high-energy electron beam irradiation on the properties of ZnO thin films prepared by magnetron sputtering

In this work we demonstrate that high-energy electron beam irradiation (HEEBI) performed in air at room temperature affects remarkably the electrical, optical, and structural properties of undoped ZnO films prepared on SiO{sub 2} substrates by magnetron sputtering techniques. Hall and photoluminescence measurements revealed that the p-type conductivity was realized in HEEBI treated films with low dose of 10{sup 14} electrons/cm{sup 2} and converted to n-type conductivity with further increase in the amount of dose. X-ray photoelectron spectroscopy showed that indiffusion of Si from the substrate as well as N from the ambient into the films took place as a result of HEEBI treatment at high and low doses, respectively. X-ray diffraction analysis indicated that all as-grown films were found to have compressive stress, which was relieved to some extent by HEEBI treatment with high dose of 10{sup 16} electrons/cm{sup 2}. It was also found that better crystallinity with a bigger grain size was observed in HEEBI treated ZnO films with a higher dose. Field emission scanning electron microscope showed that HEEBI treated films with low dose had surface morphologies with big rodlike shapes. The major acceptorlike defects were determined to be oxygen interstitial and zinc vacancy. A model was proposed in terms of O, Zn, N, and Si diffusion to explain the observed results.

36 MATERIALS SCIENCE↗

Nanoselective area growth and characterization of dislocation-free InGaN nanopyramids on AlN buffered Si(111) templates

We report the metal organic chemical vapor deposition growth of dislocation-free 100 nm thick hexagonal InGaN nanopyramid arrays with up to 33% of indium content by nano-selective area growth on patterned AlN/Si (111) substrates. InGaN grown on SiO{sub 2} patterned templates exhibit high selectivity. Their single crystal structure is confirmed by scanning transmission electron microscope combined with an energy dispersive X-ray analysis, which also reveals the absence of threading dislocations in the InGaN nanopyramids due to elastic strain relaxation mechanisms. Cathodoluminescence measurements on a single InGaN nanopyramid clearly show an improvement of the optical properties when compared to planar InGaN grown under the same conditions. The good structural, morphological, and optical quality of the InGaN nanostructures grown on AlN/Si indicates that the nano-selective area growth technology is attractive for the realization of site-controlled indium-rich InGaN nanostructure-based devices and can also be transferred to other highly mismatched substrates.

36 MATERIALS SCIENCE↗

Ternary SiGeSn alloy nanocrystals via nonthermal plasma synthesis

We report on the synthesis of ternary SiGeSn nanocrystals (NCs) produced via nonthermal plasma synthesis from silane (SiH 4 ), germane (GeH 4 ), and tetramethylstannane (Sn(CH 3 ) 4 ) precursor sources. Detailed structural, chemical, and vibrational analyses show that all three elements are incorporated both on the NC surface and within the NC core. Incorporation of Sn into the NC core is realized using a secondary injection of SiH 4 and GeH 4 precursor gases in the after-glow region of the plasma, which kinetically traps Sn in the core. We demonstrate compositional tunability of the SiGeSn NCs in which the Si and Ge ratios can be varied broadly at low Sn concentrations. We also show tunability of the Sn content up to ~2 atomic percent as revealed by ICP-MS analysis. More generally, this report demonstrates how nonthermal plasma synthesis can be used to produce metastable ternary nanostructured alloys involving thermodynamically insoluble constituents.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reconfigurable and Dynamic Distribution Systems Enabled Using Self-Sustainable Minimal-Microgrids with Region Based Stability Guarantees

In this paper, a reconfigurable and dynamic distribution system is designed using self-sustainable minimal-microgrids (min-MGs). Particularly, multiple dynamic microgrids are implemented by aggregating local min-MGs in a controllable way to facilitate service restoration at critical grid infrastructures, especially during severe power outages (e.g., those induced by natural disasters). These dynamic microgrids are implemented surrounding inverter interfaced distributed energy resources (DERs) to pick up local critical loads. Stable transient process during neighboring microgrid disconnection and resynchronization is realized by involving additional control terms in the secondary control level. Meanwhile, in order to ensure a stable operation with dynamic topology change, a computationally efficient region-based stability assessment approach is developed to ensure stability guarantees of each inverter dominated min-MG with potential changes of external grids modeled as disturbances. In contrast to conventional point-by-point stability evaluation approaches, the proposed region-based stability analysis can intuitively exhibit the feasible region comprised of stable operating points and identify sufficient stability margin to tolerate disturbances of dynamic system topology variations. Theoretical analysis is verified using simulation in MATLAB/Simulink.

distribution systems↗

Advanced and Exploratory Shock Sensing Mechanisms.

Mechanical component response to shock environments must be predictable in order to ensure reliability and safety. Whether the shock input results from accidental drops during transportation to projectile impact scenarios, the system must irreversibly transition into a safe state that is incapable of triggering the component . With this critical need in mind, the 2017 Nuclear Weapons Summer Product Realization Institute (NW SPRINT) program objective sought the design of a passive shock failsafe with emphasis on additively manufactured (AM) components. Team Advanced and Exploratory (A&E) responded to the challenge by designing and delivering multiple passive shock sensing mech anisms that activate within a prescribed mechanical shock threshold. These AM failsafe designs were tuned and validated using analytical and computational techniques including the shock response spectrum (SRS) and finite element analysis (FEA). After rapid prototyping, the devices experienced physical shock tests conducted on Sandia drop tables to experimentally verify performance. Keywords: Additive manufacturing, dynamic system, failsafe, finite element analysis, mechanical shock, NW SPRINT, shock respon se spectrum

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Time Series Dimension Reduction for Surrogate Models of Port Scanning Cyber Emulations

Surrogate model development is a key resource in the scientific modeling community for providing computational expedience when simulating complex systems without loss of great fidelity. The initial step to development of a surrogate model is identification of the primary governing components of the system. Principal component analysis (PCA) is a widely used data science technique that provides inspection of such driving factors, when the objective for modeling is to capture the greatest sources of variance inherent to a dataset. Although an efficient linear dimension reduction tool, PCA makes the fundamental assumption that the data is continuous and normally distributed. Thus, it provides ideal performance when these conditions are met. In the case for which cyber emulations provide realizations of a port scanning scenario, the data to be modeled follows a discrete time series function comprised of monotonically increasing piece-wise constant steps. The sources of variance are related to the timing and magnitude of these steps. Therefore, we consider using XPCA, an extension to PCA for continuous and discrete random variates. This report provides the documentation of the trade-offs between the PCA and XPCA linear dimension reduction algorithms, for the intended purpose to identify key components of greatest variance in our time series data. These components will ultimately provide the basis for future surrogate models of port scanning cyber emulations.

97 MATHEMATICS AND COMPUTING↗

Policy and Regulatory Environment for Utility-Scale Energy Storage: India

This report is part of a series investigating the potential for utility-scale energy storage in South Asia. The first part of the work is focused on opportunities and barriers for energy storage within existing policy and regulatory frameworks in the region. This report applies the previously-developed Energy Storage Readiness Assessment to evaluate the policy and regulatory environment for energy storage in India. Forthcoming reports will expand this analysis to other countries in South Asia. These evaluations are designed to provide insights on the opportunities and barriers for energy storage growth and deployment in each country. The second part of this work consists of techno-economic analysis to understand the drivers of energy storage investments in South Asia. Using NREL’s power system planning and operational models of South Asia, this analysis will identify potential storage applications and growth under various cost, policy, and demand growth scenarios. In addition, the regulatory and policy barriers and incentive mechanisms identified in the first task will be incorporated into the modeling task to understand their impact on energy storage deployment and operation. Together these studies will inform the applications and value of energy storage on South Asia power systems and policy and regulatory pathways to realize this value.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Community Solar Subscription Credit Considerations and Case Study

Together New Orleans (TNO) requested technical assistance through the US Department of Energy's (DOE's) National Community Solar Partnership (NCSP). The National Community Solar Partnership is a coalition of community solar stakeholders working to expand access to affordable community solar to every U.S. household and enable subscribers and their communities to realize meaningful benefits, such as reduced energy burden, increased resilience, community ownership, and equitable workforce development. TNO asked for a subject matter expert from NCSP to review the Entergy New Orleans (ENO) proposed revised Rate Schedule for Community Solar Generating Facilities. TNO requested that the proposed methodology for subscription credits for applicable residential and non-residential rate schedules be reviewed to determine the expected credit rate. The aim behind the analysis is to provide TNO and engaged stakeholders with an informed understanding of the proposed rate schedule before making decisions on the appropriate rate design for community solar (CS) subscriptions. This report is an exploration of CS subscription credit rate calculation considerations using the CS program in New Orleans as a case study. The report provides a framework for modeling CS credit rates in addition to topics that may be helpful to address when undertaking program design or rule making.

14 SOLAR ENERGY↗

An Astronaut's Risk of Experiencing a Critical Impact from Lunar Ejecta During Lunar EVA

The Moon is under constant bombardment by meteoroids. When the meteoroid is large, the impact craters the surface, launching crater ejecta far from the impact potentially threatening astronauts on the lunar surface. In the early 1960’s, the ejecta impact flux was thought no more than the sporadic meteoroid flux but with speeds one to two orders of magnitude smaller. However, the Lunar Module designers realized by 1965 that meteoroid bumpers do not perform well at the smaller ejecta impact speeds. Their estimates of the Lunar Module risk of penetration by ejecta were 25 to 50% of the total risk. This was in spite of the exposure time to ejecta being only a third of that to sporadic meteoroids. The standard committee based the 1969 NASA SP-8013 lunar ejecta environment on Zook’s 1967 flux analysis and Gault, Shoemaker and Moore’s 1963 test data for impacts into solid basalt targets. However, Zook noted in his 1967 analysis, that if the lunar surface was composed of soil, that the ejected soil particles would be smaller than ejected basalt fragments and that the ejection speeds would be smaller. Both effects contribute to reducing the risk of a critical failure due to lunar ejecta. The authors revised Zook’s analysis to incorporate soil particle size distributions developed from analysis of Apollo lunar soil samples and ejected mass as a function of ejecta speed developed from coupling parameter analyses of soil impact-test data. The authors estimated EVA risk by assuming failure occurs at a critical impact energy. At these impact speeds, this might be true for suit hard and soft goods. However, these speeds are small enough that there may be significant strength effects that require new test data to modify the hypervelocity critical energy failure criterion. With these caveats, Christiansen, Cour-Palais and Freisen list the critical energy of the ISS EMU hard upper torso as 44 J and the helmet and visor as 71 J at hypervelocity. The authors then assumed that the lunar EVA suit fails at 50 J critical energy. This results in a 1,700,000 years mean time to failure using the results of this analysis and a 3,800 years mean time to failure using NASA SP-8013.

Bjorkman, Michael D.↗

Orbital Debris Ontology, Terminology, and Knowledge Modeling

The looming threat orbital debris poses to assets in orbit demands solutions. As the orbital population grows, so does this hazard, but so does the sea of data. The problem is also an opportunity for interdisciplinary innovation and cooperation. This paper focuses on the data and information management aspect of developing solutions for a sustainable and safe orbital space environment. The corresponding author’s in-progress work to develop an orbital debris domain ontology is summarized in order to discuss knowledge modeling for this domain. Methodological approaches of this effort can also contribute to standards efforts and address terminological and policy questions. Leveraging the growing volumes of orbital debris and space situational awareness (SSA) data will create a more complete picture of the orbital space environment. Part of the solution will be: consistent and correct data interpretation, sharing orbital debris and SSA data in one form or another, terminology development & harmonization, and knowledge or domain modeling. To facilitate this, [Rovetto, 2015/16] discussed ontology development for the orbital debris domain. This paper lists concepts from that paper, and subsequently developed concepts [2-9]. Ontology engineering is an interdisciplinary field related to knowledge representation and reasoning in artificial intelligence, semantic technologies and the so-called semantic web. An ontology is effectively a computable and semantically rich terminology that presents a knowledge or domain model for a topic area. Expressions of knowledge or assertions are stored using formally defined term. This knowledge base is reasoned over to yield answers to queries, among other things. Ontologies have been developed in knowledge-based projects across various disciplines, and used for such things as search engines, chatbots, enterprise knowledge graphs, etc. Ontologies support: interoperability, automated reasoning, data sharing and integration, data search and retrieval, and communicating the meaning of data. The Orbital Debris Ontology (ODO), and related ontologies [Rovetto & Kelso 2016] [Rovetto 2016, 2017], were proposed to help achieve this. ODO, for instance, is intended as a domain ontology that can be used across federated databases, offering an explicitly specified set of concepts describing the orbital debris domain. Its meaning-rich taxonomy will provide a sharable semantics for orbital debris data to, in part, consistently communicate the meaning of data to both humans and machines, and tag data elements in space object catalogs to help afford inference tasks, decision support, knowledge discovery, and information integration. ODO and the SSA ontology (SSAO) is part of the overall Orbital Space Domain Ontology concept, which is conceived as a broader domain reference ontology. It aims to provide a knowledge representation structure of the orbital space environment, a common semantic model, and develop a sharable terminology. Collectively this will provide common meaning for datasets, a high-level taxonomy or classification for orbital space objects, and thus means to characterize space objects. Ongoing efforts have included using visualizations, R, JSON-LD, and contemporary semantic technologies. Potential applications and interdisciplinary partnerships include web-based platforms, web apps, visualizations, and academia projects. Community input and participation may yield a more widely understood domain model as well as facilitate terminological standards. For example, the proposed conceptual, terminological and ontological analysis may contribute to such efforts as the Space Debris Mitigation Requirements in the International Standards Organization by developing more precise, consistent and coherent terms and definitions. Projects that seek to develop in-house ontologies can use ODO and related ontologies as domain reference ontologies. This paper was developed independent of author affiliations. Readers are encouraged to contact corresponding author(1) with general interest and potential opportunities to support or realize the described project.

Robert J. Rovetto↗

Analysis of RAE-B attitude data

Attempts made to obtain a description of the in-orbit dynamic behavior of the RAE-B spacecraft and account for the discrepancies between predicted and actual in-orbit performance are reported. In particular, attitude dynamics during the final despin operations in lunar orbit, throughout all deployment operations, and into the final steady state mission mode were investigated. Attempts made to match computer simulation results to the observed equilibrium data are discussed. Due to a damaged antenna boom and the unavailability of sufficient attitude and dynamics data, most of the objectives were not realized.

Hedland, D. A.↗

Theoretical analysis of the EWEC report

This analytic investigation shows how the electromagnetic wave energy conversion (EWEC) device, as used for solar-to-electric power conversion, is significantly different from solar cells, with respect to principles of operation. An optimistic estimate of efficiency is about 80% for a full-wave rectifying configuration with solar radiation normally incident. This compares favorably with the theoretical maximum for a CdTe solar cell (23.5%), as well as with the efficiencies of more familiar cells: Si (19.5%), InP (21.5%), and GaAs (23%). Some key technological issues that must be resolved before the EWEC device can be realized are identified. Those issues include: the fabrication of a pn semi-conductor junction with no permittivity resonances in the optical band; and the efficient channeling of the power received by countless microscopic horn antennas through a relatively few number of wires.

Source record↗

Implicit Formulations of Bounded-Impulse Trajectory Models for Preliminary Interplanetary Low-Thrust Analysis

The bounded-impulse approach to low-thrust interplanetary trajectory optimization is widely used. In an effort to efficiently implement this approach using NASA’s OpenMDAO optimization software, the authors have implemented implicit formulations of the forward shooting/backwards-shooting methods commonly used in bounded-impulse models. These implicit approaches allow for vectorization of the underlying calculations which can significantly reduce runtime in interpreted languages. An implicit approach may be either converged by using an underlying nonlinear solver to converge the state propagation, or as a constraint in an optimizer-driven multiple-shooting approach. Significant computational efficiency gains are realized through the utilization of the modular approach to unified derivatives. Further computational efficiency is achieved by capitalizing on the sparsity of the constraint Jacobian matrix. This work demonstrates that a vectorized multiple-shooting approach for propagating a state-time history is superior in terms of computational efficiency as the number of segments in the state-propagation is increased.

Falck, Robert D↗

EVOLUTION OF THE COSMIC MICROWAVE BACKGROUND POWER SPECTRUM ACROSS WILKINSON MICROWAVE ANISOTROPY PROBE DATA RELEASES: A NONPARAMETRIC ANALYSIS

Using a nonparametric function estimation methodology, we present a comparative analysis of the Wilkinson Microwave Anisotropy Probe (WMAP) 1-, 3-, 5-, and 7-year data releases for the cosmic microwave background (CMB) angular power spectrum with respect to the following key questions. (1) How well is the power spectrum determined by the data alone? (2) How well is the {Lambda}CDM model supported by a model-independent, data-driven analysis? (3) What are the realistic uncertainties on peak/dip locations and heights? Our results show that the height of the power spectrum is well determined by data alone for multipole l approximately less than 546 (1-year), 667 (3-year), 804 (5-year), and 842 (7-year data). We show that parametric fits based on the {Lambda}CDM model are remarkably close to our nonparametric fits in l-regions where data are sufficiently precise. In contrast, the power spectrum for an H{Lambda}CDM model is progressively pushed away from our nonparametric fit as data quality improves with successive data realizations, suggesting incompatibility of this particular cosmological model with respect to the WMAP data sets. We present uncertainties on peak/dip locations and heights at the 95% (2{sigma}) level of confidence and show how these uncertainties translate into hyperbolic 'bands' on the acoustic scale (l{sub A} ) and peak shift ({phi}{sub m}) parameters. Based on the confidence set for the 7-year data, we argue that the low-l upturn in the CMB power spectrum cannot be ruled out at any confidence level in excess of about 10% ( Almost-Equal-To 0.12{sigma}). Additional outcomes of this work are a numerical formulation for minimization of a noise-weighted risk function subject to monotonicity constraints, a prescription for obtaining nonparametric fits that are closer to cosmological expectations on smoothness, and a method for sampling cosmologically meaningful power spectrum variations from the confidence set of a nonparametric fit.

79 ASTRONOMY AND ASTROPHYSICS↗