SEARCH · Engineering Papers

Results for “Propulsion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Apollo 15 mission report. Supplement 3: Ascent propulsion system final flight evaluation

Results from the postflight analysis of the ascent propulsion system (APS) performance during the Apollo 15 mission are presented. The duty cycle for the LM-10 APS consisted of two firings, and ascent stage liftoff from the lunar surface and the terminal phase ignition (TPI) burn. An evaluation was made of APS performance for the first firing and found to be satisfactory. No propulsion data was received from the second APS burn; however, all indications were that the burn was nominal. All performance parameters were well within their LM-10 3-sigma limits. Calculated throat erosion at engine cutoff for the LM-10 APS was approximately 3 percent greater than predicted.

Griffin, W. G.↗

NASA NTRS1973

Effect of reactor coolant radioactivity upon configuration feasibility for a nuclear electric propulsion vehicle

A preliminary shielding analysis was carried out for a conceptual nuclear electric propulsion vehicle designed to transport payloads from low earth orbit to synchronous orbit. The vehicle employed a thermionic nuclear reactor operating at 1575 kilowatts and generated 120 kilowatts of electricity for a round-trip mission time of 2000 hours. Propulsion was via axially directed ion engines employing 3300 pounds of mercury as a propellant. The vehicle configuration permitted a reactor shadow shield geometry using LiH and the mercury propellant for shielding. However, much of the radioactive NaK reactor coolant was unshielded and in close proximity to the power conditioning electronics. An estimate of the radioactivity of the NaK coolant was made and its unshielded dose rate to the power conditioning equipment calculated. It was found that the activated NaK contributed about three-fourths of the gamma dose constraint. The NaK dose was considered a sufficiently high fraction of the allowable gamma dose to necessitate modifications in configuration.

Soffer, L.↗

NASA NTRS1973

A study of the compatibility of science instruments with the solar electric propulsion space vehicle

Electromagnetic interference and field-of-view constraints are identified as the areas of most concern to science on solar electric propulsion space vehicles. Several areas are indicated which more detailed data on the space vehicle environment are needed. In addition, possible means to attain or demonstrate science/space vehicle compatibility are recommended for further iteration between space vehicle design and science payload considerations. The space vehicle design developed by the solar electric propulsion system integration technology effort is used. Two payload sets for comet Encke missions (a slow flyby and a rendezvous), as well as several instruments which are not included in the two payload sets, are analyzed to determine requirements on the space vehicle imposed by the instruments in order to meet their objectives. Environmental requirements for the sets of instruments are developed and compared to both the SEPSIT design criteria and the environment as it is presently understood.

Parker, R. H.↗

NASA NTRS1973

Nuclear electric propulsion reactor control systems status

The thermionic reactor control system design studies conducted over the past several years for a nuclear electric propulsion system are described and summarized. The relevant reactor control system studies are discussed in qualitative terms, pointing out the significant advantages and disadvantages including the impact that the various control systems would have on the nuclear electric propulsion system design. A recommendation for the reference control system is made, and a program for future work leading to an engineering model is described.

Ferg, D. A.↗

NASA NTRS1973

Velocity control propulsion subsystem of the Radio Astronomy Explorer satellite for Goddard Space Flight Center

The Velocity Control Propulsion Subsystem (VCPS) was designed the propulsion required for trajectory and lunar orbit corrections of the spacecraft. A GFE clamp assembly physically attaches the VCPS to the spacecraft and the unit is ejected after completing the required corrections. The VCPS is physically and functionally separated from the spacecraft except for the electrical and telemetry interfaces. A GFE transtage provides the superstructure on which the VCPS is assembled. The subsystem consists of two 5 foot pound rocket engine assemblies, 4 propellant tanks, 2 latching valves, 2 fill and drain valves, a system filter, pressure transducer, gas and propellant manifolds and electrical heaters and thermostats. The RAE-B VCPS program covered the design, manufacture and qualification of one subsystem. This subsystem was to be manufactured, subjected to qualification tests; and refurbished, if necessary, prior to flight. The VCPS design and test program precluded the need for refurbishing the subsystem and the unit was delivered to GSFC at the conclusion of the program.

Braught, W.↗

NASA NTRS1974

Nuclear electric propulsion stage requirements and description

The application of a nuclear electric propulsion (NEP) stage in the exploration of near-earth, cometary, and planetary space was discussed. The NEP stage is powered by a liquid-metal-cooled, fast spectrum thermionic reactor capable of providing 120 kWe for 20,000 hours. This power is used to drive a number of mercury ion bombardment thrusters with specific impulse in the range of 4000-5000 seconds. The NEP description, characteristics, and functional requirements are discussed. These requirements are based on a set of five coordinate missions, which are described in detail. These five missions are a representative part of a larger set of missions used as a basic for an advanced propulsion comparison study. Additionally, the NEP stage development plan and test program is outlined and a schedule presented.

Mondt, J. F.↗

NASA NTRS1974

Test of acoustic tone source and propulsion performance of C8A Buffalo suppressor nozzle

Results are presented for a static acoustic and propulsion performance ground test conducted at the Boeing hot nozzle facility on the C8A Buffalo noise suppressor nozzle. Various methods to remove a nozzle-associated 2000-Hz tone are evaluated. Results of testing this rectangular-array lobed nozzle for propulsion performance and acoustic directivity are reported. Recommendations for future nozzle modifications and further testing are included. Appendix A contains the test plan. Appendix B presents the test log. Appendix C contains plots of the one-third octave sound pressure levels recorded during the test. Appendix D describes the acoustic data recording and reduction systems. The performance data is tabulated in Appendix E.

Marrs, C. C.↗

NASA NTRS1974

Solar array technology evaluation program for SEPS (Solar Electrical Propulsion Stage)

An evaluation of the technology and the development of a preliminary design for a 25 kilowatt solar array system for solar electric propulsion are discussed. The solar array has a power to weight ratio of 65 watts per kilogram. The solar array system is composed of two wings. Each wing consists of a solar array blanket, a blanket launch storage container, an extension/retraction mast assembly, a blanket tensioning system, an array electrical harness, and hardware for supporting the system for launch and in the operating position. The technology evaluation was performed to assess the applicable solar array state-of-the-art and to define supporting research necessary to achieve technology readiness for meeting the solar electric propulsion system solar array design requirements.

Source record↗

NASA NTRS1973

Solar Electric Propulsion Stage design

This paper summarizes the analyses and design studies performed for the Solar Electric Propulsion Stage (SEPS). Mission analysis results were used to establish general design requirements. A performance sensitivity analysis was then used to define an operational power level of 21 kW for accomplishing a broad range of interplanetary and earth-orbital missions. With this base, propulsion system and stage subsystem design analyses were performed to support concept and configuration studies. Design study areas include solar array, thrust subsystem, thermal control, structures, and astrionics. Results are presented primarily for areas not covered by more specific technical papers (i.e., thrust subsystem, solar array, design requirements and configuration studies).

Masek, T. D.↗

NASA NTRS1973

Development of the propulsion subsystem for the Viking 75 Orbiter

The development of the Viking 75 Orbiter propulsion subsystem has been completed and qualification is under way. This development required an extension of the Mariner Mars 1971 propulsion subsystem technology to meet the Viking 75 requirements of three times the burn time and five times the number of burns. Modifications have been incorporated into the rocket engine to increase the cooling margin for the 2700-second Mars orbit insertion burn. This capability has been demonstrated in both engine firings and subsystem tests. A new surface tension device has been developed to position the propellants (N2O4 and MMH) over the tank outlets during zero-g flight. Extensive scale model testing has been conducted to prove this propellant management concept. This subsystem will provide midcourse corrections, an orbit insertion burn and 20 orbit trims for the Viking 75 Spacecraft. The Viking Project is managed by the Langley Research Center, National Aeronautics and Space Administration.

Vote, F. C.↗

NASA NTRS1973

Detonation propulsion for high pressure environments

One limitation encountered by chemical rocket propulsion in high pressure planetary atmospheres is illustrated by the conflict between the dependence of specific impulse on the ratio of chamber pressure to ambient pressure and the dependence of the motor structural design on the difference between the pressures. This work proposes to resolve the difficulty by employing detonating propellant in which the high pressures necessary for efficient propulsion are developed over a short time and need not be contained statically. Experimental results are presented to substantiate this claim of relatively high performance, together with an analytical development that approximately describes the flow dynamics.

Varsi, G.↗

NASA NTRS1973

Current technology in ion and electrothermal propulsion

The state of the art and projected developmental trends in the fields of ion and electrothermal propulsion systems intended for use in long and complex earth-orbital missions and interplanetary spacecraft missions are reviewed. The characteristics of existing thrust vectoring systems are outlined, together with data on the 5-cm and 8-cm electron bombardment thrusters, the cesium bombardment ion thruster, and the 8-cm, 15-cm, and 30-cm thruster using xenon propellant. The electrothermal ammonia system and the electrothermal hydrazine system are described, and the principles of propulsion system selection are examined.

Finke, R. C.↗

NASA NTRS1973

The advantages of the high voltage solar array for electric propulsion

The high voltage solar array (HVSA) offers improvements in efficiency, weight, and reliability for the electric propulsion power system. The basic HVSA technology involves designing the solar array to deliver power in the form required by the ion thruster. This paper delves into conventional power processes and problems associated with ion thruster operation using SERT II experience for examples. In this light, the advantages of the HVSA concept for electric propulsion are presented. Tests conducted operating the SERT II thruster system in conjunction with HVSA are discussed. Thruster operation was observed to be normal and in some respects improved.

Sater, B. L.↗

NASA NTRS1974

Sonic inlet technology development and application to STOL propulsion

Recent developments in sonic inlet technology are presented with particular emphasis on STOL propulsion systems. Inlet noise reduction requirements are considered for an augmentor wing and an upper surface blowing type of propulsion system. The current state of the art is discussed with respect to performance and noise potential of different sonic inlet concepts. An acoustic and aerodynamic performance comparison is presented for several inlet configurations based on experimental results.

Klujber, F.↗

NASA NTRS1974

Propulsion system sizing for powered lift and mechanical flap quiet aircraft

A method of propulsion system sizing for mechanical flap and externally blown flap aircraft is demonstrated. Included in this study is the effect of various levels of noise suppression on the aircraft final design characteristics. Both aircraft are sized to operate from a 3000-ft runway and perform the same mission. For each aircraft concept, propulsion system sizing is demonstrated for two different engine cycles - one having a fan pressure ratio of 1.5 and a bypass ratio of 9 and the other having a fan pressure ratio of 1.25 and a bypass ratio of 17.8. The results presented include the required thrust to weight ratio and wing loading and the resulting gross weight and direct operating costs as functions of the engine noise level for each of the four combinations of engine cycles and aircraft concepts.

Bowles, J. V.↗

NASA NTRS1974

Electric propulsion - Now

The state of the art of electric propulsion technology is discussed with a review of the many difficult engineering problems which must be resolved before the incorporation of electric propulsion in space missions. Interferences with the spacecraft and its scientific instrumentation, conducted and radiated electromagnetic interferences during the switching and processing of large electrical loads, and mercury and other eroded materials deposition on the spacecraft are indicated among the engineering and design challenges to be overcome and resolved.

Gerpheide, J. H.↗

NASA NTRS1974

Evaluation of a new jet flap propulsive-lift system for turbofan-powered STOL transports

A large-scale STOL transport model with a new jet flap propulsive-lift system was subject to wind-tunnel testing. Aerodynamically, this IBF system combines the benefits of the jet flap and the mechanical flap with boundary layer control. Structurally, it creates its own spanwise air duct with the deflection of the mechanical flap. An additional short-chord control flap, located at the jet-flap exit, provides a powerful means for flight path and lateral controls. The results show that the overall effectiveness of this flap system compares well with other jet flap propulsive-lift systems. A preliminary study based on the wind-tunnel data was made on a medium-size IBF STOL jet transport configuration for a typical-military mission. This study showed that the IBF results in a configuration with a relatively low T/W ratio, making the system an attractive candidate for future designs.

Chin, Y. T.↗

NASA NTRS1974

A method for determining optimum phasing of a multiphase propulsion system for a single-stage vehicle with linearized inert weight

A general analytical treatment is presented of a single-stage vehicle with multiple propulsion phases. A closed-form solution for the cost and for the performance and a derivation of the optimal phasing of the propulsion are included. Linearized variations in the inert weight elements are included, and the function to be minimized can be selected. The derivation of optimal phasing results in a set of nonlinear algebraic equations for optimal fuel volumes, for which a solution method is outlined. Three specific example cases are analyzed: minimum gross lift-off weight, minimum inert weight, and a minimized general function for a two-phase vehicle. The results for the two-phase vehicle are applied to the dual-fuel rocket. Comparisons with single-fuel vehicles indicate that dual-fuel vehicles can have lower inert weight either by development of a dual-fuel engine or by parallel burning of separate engines from lift-off.

Martin, J. A.↗