Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Program characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Optimizing Altitude Sampling and Sensitivity with the Goldstone Orbital Debris Radar

The NASA Orbital Debris Program Office (ODPO) has used the Goldstone Orbital Debris Radar (Goldstone) since 1993 to characterize orbital debris (OD) in low Earth orbit too small to be tracked by the U.S. Space Surveillance Network. Operated by NASA’s Jet Propulsion Laboratory, Goldstone can measure OD as small as 3 mm at 1000 km altitude and lower. Goldstone is a bistatic radar that for 25 years used Deep Space Station (DSS)-14 as a transmitter and DSS-15 as a receiver. In early 2018, DSS-15 was decommissioned and replaced with DSS-25 (and occasionally DSS-26) of the Deep Space Network Apollo Cluster. The increased baseline between DSS-14 and DSS-25 significantly reduced the instantaneous altitude coverage of the bistatic beam overlap. Initial measurements in 2018 were focused around 800 km, which has approximately the highest flux of sub-centimeter debris. In 2019, DSS-14 was offline for maintenance, and the ODPO designed an annual survey observation plan to efficiently sample altitudes from 700 km to 1000 km, since many NASA satellites fly in this range. This paper discusses the observation plan, including the development of the pointings, a refinement of the altitudes of interest, and an analysis of the effects of random pointing errors on beam overlap. Additionally, results from measurements taken in 2020 and 2021 are presented, showing that not only is the observation plan effective at sampling 700 km to 1000 km altitude, but it is also producing the most sensitive terrestrial radar measurements at these altitudes to date.

James Murray↗

Overview of the High Reynolds Number Ascent Wind Tunnel Test of the Space Launch System at the National Transonic Facility

Transonic, high Reynolds number wind tunnel testing for the Space Launch System (SLS) ascent flight environment was conducted in the National Transonic Facility (NTF) at the NASA Langley Research Center from December 2019 to April 2021. The test was sponsored by the SLS Program and the NASA Engineering & Safety Center with the ob- jective of assessing and characterizing Reynolds number effects on the ascent aerodynamics of the SLS launch vehicle. The cryogenic test article was a 1.75%-scale representation of the SLS Block 1 Cargo configuration that was fabricated mostly out of stainless steel, but with several additive-manufactured components including the Solid Rocket Booster (SRB) attach brackets and the SRB nozzles. This was the first use of additive manufacturing on structural components of a cryogenic model in the NTF, therefore post-fabrication material testing and inspections were performed to satisfy safety requirements. Force & moment and surface pressure data were acquired for Mach numbers between 0.50 and 0.95 over a range of Reynolds numbers based on core stage diameter between 2x10^6 and a maximum of 40x10^6 corresponding to 45% of flight Reynolds number. Additionally, flow visualization data using Pressure Sensitive Paint were acquired with a focus on the SRB forward attach area, which is susceptible to Reynolds number sensitivity at transonic speeds. This pa- per provides an overview of the test campaign including details on the unique test article and the experimental setup and test execution. General test findings and observations are also presented, but the majority of the test results and data analyses are provided in a companion paper.

Space Launch System↗

Overview of the High Reynolds Number Ascent Wind Tunnel Test of the Space Launch System at the National Transonic Facility

Transonic, high Reynolds number wind tunnel testing for the Space Launch System (SLS) ascent flight environment was conducted in the National Transonic Facility (NTF) at the NASA Langley Research Center from December 2019 to April 2021. The test was sponsored by the SLS Program and the NASA Engineering & Safety Center with the ob- jective of assessing and characterizing Reynolds number effects on the ascent aerodynamics of the SLS launch vehicle. The cryogenic test article was a 1.75%-scale representation of the SLS Block 1 Cargo configuration that was fabricated mostly out of stainless steel, but with several additive-manufactured components including the Solid Rocket Booster (SRB) attach brackets and the SRB nozzles. This was the first use of additive manufacturing on structural components of a cryogenic model in the NTF, therefore post-fabrication material testing and inspections were performed to satisfy safety requirements. Force & moment and surface pressure data were acquired for Mach numbers between 0.50 and 0.95 over a range of Reynolds numbers based on core stage diameter between 2x10^6 and a maximum of 40x10^6 corresponding to 45% of flight Reynolds number. Additionally, flow visualization data using Pressure Sensitive Paint were acquired with a focus on the SRB forward attach area, which is susceptible to Reynolds number sensitivity at transonic speeds. This paper provides an overview of the test campaign including details on the unique test article and the experimental setup and test execution. General test findings and observations are also presented, but the majority of the test results and data analyses are provided in a companion paper.

Space Launch System↗

Optimizing Altitude Sampling and Sensitivity with the Goldstone Orbital Debris Radar

The NASA Orbital Debris Program Office (ODPO) has used the Goldstone Orbital Debris Radar (Goldstone) since 1993 to characterize orbital debris (OD) in low Earth orbit too small to be tracked by the U.S. Space Surveillance Network. Operated by NASA’s Jet Propulsion Laboratory, Goldstone can measure OD as small as 3 mm at 1000 km altitude and lower. Goldstone is a bistatic radar that for 25 years used Deep Space Station (DSS)-14 as a transmitter and DSS-15 as a receiver. In early 2018, DSS-15 was decommissioned and replaced with DSS-25 (and occasionally DSS-26) of the Deep Space Network Apollo Cluster. The increased baseline between DSS-14 and DSS-25 significantly reduced the instantaneous altitude coverage of the bistatic beam overlap. Initial measurements in 2018 were focused around 800 km, which has approximately the highest flux of sub-centimeter debris. In 2019, DSS-14 was offline for maintenance, and the ODPO designed an annual survey observation plan to efficiently sample altitudes from 700 km to 1000 km, since many NASA satellites fly in this range. This paper discusses the observation plan, including the development of the pointings, a refinement of the altitudes of interest, and an analysis of the effects of random pointing errors on beam overlap. Additionally, results from measurements taken in 2020 and 2021 are presented, showing that not only is the observation plan effective at sampling 700 km to 1000 km altitude, but it is also producing the most sensitive terrestrial radar measurements at these altitudes to date.

James Murray↗

Thermophysical Characterization of NUW-LHT-5M Lunar Highland Simulant

NASA's imminent return to the Moon with the Artemis III program necessitates efficient lunar construction and habitation technologies, prompting development of in situ resource utilization (ISRU). Lunar ISRU depends on high-fidelity lunar regolith simulants that must be thermophysically faithful to the Moon. The 5th iteration of the LHT highland simulant series aims to be the best lunar highland simulant to date.

lunar↗

Thermophysical Characterization of NUW-LHT-5M Lunar Highland Simulant

NASA's imminent return to the Moon with the Artemis III program necessitates efficient lunar construction and habitation technologies, prompting development of in situ resource utilization (ISRU). Lunar ISRU depends on high-fidelity lunar regolith simulants that must be thermophysically faithful to the Moon. The 5th iteration of the highland simulant series aims to be the best lunar highland simulant to date.

lunar↗

TOI-3568 b: A Super-Neptune in the Sub-Jovian Desert

The sub-Jovian desert is a region in the mass–period and radius–period parameter space that typically encompasses short-period ranges between super-Earths and hot Jupiters, and exhibits an intrinsic dearth of planets. This scarcity is likely shaped by photo evaporation caused by the stellar irradiation received by giant planets that have migrated inward. We report the detection and characterization ofTOI-3568 b, a transiting super-Neptune with a mass of26.4±1.0M⊕, a radius of5.30±0.27R⊕, a bulk density of0.98±0.15g cm−3, and an orbital period of 4.417965 (5) d situated in the vicinity of the sub-Jovian desert. This planet orbiting a K dwarf star with solar metallicity was identified photometrically by the Transiting Exoplanet Survey Satellite (TESS). It was characterized as a planet by our high-precision radial-velocity (RV) monitoring program using MAROON-X at Gemini North, supplemented with additional observations from the SPICE large program with SPIRou at CFHT. We performed a Bayesian MCMC joint analysis of the TESSand ground-based photometry, and MAROON-X and SPIRou RVs, to measure the orbit, radius, and mass of the planet, as well as a detailed analysis of the high-resolution flux and polarimetric spectra to determine the physical parameters and elemental abundances of the host star. Our results reveal TOI-3568 b to be a hot super-Neptune rich in hydrogen and helium, with a core of heavier elements of between 10 and 25 M⊕in mass. We analyzed the photo evaporation status of TOI-3568 b and find that it experiences one of the highest extreme-ultraviolet (EUV) luminosities among planets with a mass of Mp<2MNep, yet it has an evaporation lifetime exceeding 5 Gyr. Positioned in the transition between two significant populations of exoplanets on the mass–period and energy diagrams, this planet presents an opportunity to test theories concerning the origin of the sub-Jovian desert.

stars: individual: TOI-3568↗

Radiological Laboratory, Utility, Office Building LEED Strategy & Achievement

Missions that the Radiological Laboratory, utility, Office Building (RLUOB) supports are: (1) Nuclear Materials Handling, Processing, and Fabrication; (2) Stockpile Management; (3) Materials and Manufacturing Technologies; (4) Nonproliferation Programs; (5) Waste Management Activities - Environmental Programs; and (6) Materials Disposition. The key capabilities are actinide analytical chemistry and material characterization.

ACTINIDES↗

Wind Program Accomplishments

This fact sheet describes some of the accomplishments of DOE's Wind Program through its investments in technology development and market barrier reduction, and how those accomplishments are supporting the advancement of renewable energy generated using the United States' abundant wind resources.

wind program, accomplishments, wind, testing, demo↗

Completing the Cleanup of the US Department of Energy's East Tennessee Technology Park - Four Years Early - 16067

On August 1, 2011, URS - CH2M Oak Ridge LLC (UCOR) began its $2.6 billion cleanup of the East Tennessee Technology Park (ETTP), the former Oak Ridge Gaseous Diffusion Plant, located on the U.S. Department of Energy's (DOE) Oak Ridge Reservation (ORR) in Tennessee. Under the contract, the scope of work to be completed includes demolition of all gaseous diffusion buildings, namely K-25, K-31 and K-27, as well as other facilities such as the Toxic Substance Control Act (TSCA) Incinerator, the K-1200 Centrifuge Complex and the K-1037 Barrier Plant. Additionally, UCOR will remove contaminated soils and treat contaminated groundwater. Waste generated by these cleanup activities will be disposed at onsite as well as offsite facilities. UCOR will also continue to manage hundreds of the DOE Oak Ridge Office of Environmental Management (OREM)-owned facilities across the ORR. Due largely to funding challenges early in the project, the DOE estimated in their October 2013 Program Plan 2014-2024 that ETTP cleanup would not be achieved until 2024, four years later than originally scheduled in UCOR's contract with the DOE. In November 2014, the DOE Manager for OREM, Susan Cange, publicly shared her 'vision' for ETTP cleanup by 2020, four years earlier than the DOE's current plan. As part of Vision 2020, all gaseous diffusion buildings would be demolished by the end of 2016. In response to Ms. Cange's vision, UCOR published a Strategic Plan describing how ETTP could be cleaned up by 2020, provided that a number of funding and programmatic and technical challenges could be overcome. UCOR is in the midst of implementing its Strategic Plan, and progress is being made to that end. Since assuming its responsibilities as the ETTP cleanup contractor, UCOR has completed its life-cycle Performance Measurement Baseline (PMB); received its Earned Value Management System (EVMS) certification; completed the D and D of the 44-acre K-25 and 17-acre K-31 gaseous diffusion buildings; completed the K-1070- B Burial Ground remediation project; completed RCRA closure of the TSCA Incinerator; and disposed of more than 541,411 cubic yards of cleanup waste while managing the on-site Environmental Management Waste Management Facility (EMWMF). In 2015, UCOR achieved safety 'Star Status' under the DOE's Voluntary Protection Program (VPP); completed the demolition of the K-31 gaseous diffusion building; advanced the characterization and deactivation of the K-27 gaseous diffusion building, readying the building for the start of demolition in 2016; and began characterization activities in the K-1037 Barrier Plant as well as a number of facilities in the Poplar Creek Area of the ETTP Site. Project performance through December 31, 2015, is as follows: Cost Performance Index - 1.12, Schedule Performance Index - 1.02. Since safety is the foundation of all cleanup work, UCOR's safety record goes hand-in-hand with its project performance. Through calendar year 2015, UCOR's recordable injury rate was 0.94 occurrences per 200,000 work hours, and the day away case rate was 0.31. These rates are both below the DOE and UCOR goals. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

UTILIZING INNOVATIVE TECHNOLOGIES FOR ENVIRONMENTAL CLEAN-UP, SAVAHHAH RIVER SITE

The Savannah River Site (SRS) is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River near Aiken, South Carolina. During operations, which started in 1951, hazardous substances (chemicals and radionuclides) were released to the environment. The releases occurred as a result of inadvertent spills and waste disposal in unlined pits and basins which was common practice before environmental regulations existed. The hazardous substances have migrated to the vadose zone and groundwater in many areas of the SRS, resulting in 515 waste units and facilities that are required by environmental regulations, to undergo characterization and, if needed, remediation. In the initial years of the SRS environmental cleanup program (early 1990s), the focus was to use common technologies (such as pump and treat, air stripping, excavation and removal) that actively and tangibly removed contamination. Exclusive use of these technologies required continued and significant funding while often failing to meet acceptable clean-up goals and objectives. Recognizing that a more cost-effective approach was needed, SRS implemented new and complementary remediation methods focused on active and passive technologies targeted to solve specific remediation problems. Today, SRS uses technologies such as chemical/pH-adjusting injection, phytoremediation, underground cutoff walls, dynamic underground stripping, soil fracturing, microbial degradation, baroballs, electrical resistance heating, soil vapor extraction, and microblowers to more effectively treat contamination at lower costs. Additionally, SRS's remediation approach cost effectively maximizes cleanup as SRS works proactively with multiple regulatory agencies. Using GIS, video, animation, and graphics, SRS is able to provide an accurate depiction of the evolution of SRS groundwater and vadose zone cleanup activities to convince stakeholders and regulators of the effectiveness of various cleanup technologies. Remediating large, complex groundwater plumes using state-of-the-art technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted. technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Normalized sensitivities and parameter identifiability of in situ diffusion experiments on Callovo-Oxfordian clay at Bure site

DIR (Diffusion of Inert and Reactive tracers) is an experimental program performed by ANDRA at Bure underground research laboratory in Meuse/Haute Marne (France) to characterize diffusion and retention of radionuclides in Callovo-Oxfordian (C-Ox) argillite. In situ diffusion experiments were performed in vertical boreholes to determine diffusion and retention parameters of selected radionuclides. C-Ox clay exhibits a mild diffusion anisotropy due to stratification. Interpretation of in situ diffusion experiments is complicated by several non-ideal effects caused by the presence of a sintered filter, a gap between the filter and borehole wall and an excavation disturbed zone (EdZ). The relevance of such non-ideal effects and their impact on estimated clay parameters have been evaluated with numerical sensitivity analyses and synthetic experiments having similar parameters and geometric characteristics as real DIR experiments. Normalized dimensionless sensitivities of tracer concentrations at the test interval have been computed numerically. Tracer concentrations are found to be sensitive to all key parameters. Sensitivities are tracer dependent and vary with time. These sensitivities are useful to identify which are the parameters that can be estimated with less uncertainty and find the times at which tracer concentrations begin to be sensitive to each parameter. Synthetic experiments generated with prescribed known parameters have been interpreted automatically with INVERSE-CORE{sup 2D} and used to evaluate the relevance of non-ideal effects and ascertain parameter identifiability in the presence of random measurement errors. Identifiability analysis of synthetic experiments reveals that data noise makes difficult the estimation of clay parameters. Parameters of clay and EdZ cannot be estimated simultaneously from noisy data. Models without an EdZ fail to reproduce synthetic data. Proper interpretation of in situ diffusion experiments requires accounting for filter, gap and EdZ. Estimates of the effective diffusion coefficient and the porosity of clay are highly correlated, indicating that these parameters cannot be estimated simultaneously. Accurate estimation of D{sub e} and porosities of clay and EdZ is only possible when the standard deviation of random noise is less than 0.01. Small errors in the volume of the circulation system do not affect clay parameter estimates. Normalized sensitivities as well as the identifiability analysis of synthetic experiments have provided additional insight on inverse estimation of in situ diffusion experiments and will be of great benefit for the interpretation of real DIR in situ diffusion experiments.

54 ENVIRONMENTAL SCIENCES↗

Characterizing the Response of Commercial and Industrial Facilities to Dynamic Pricing Signals from the Utility

We describe a method to generate statistical models of electricity demand from Commercial and Industrial (C&I) facilities including their response to dynamic pricing signals. Models are built with historical electricity demand data. A facility model is the sum of a baseline demand model and a residual demand model; the latter quantifies deviations from the baseline model due to dynamic pricing signals from the utility. Three regression-based baseline computation methods were developed and analyzed. All methods performed similarly. To understand the diversity of facility responses to dynamic pricing signals, we have characterized the response of 44 C&I facilities participating in a Demand Response (DR) program using dynamic pricing in California (Pacific Gas and Electric's Critical Peak Pricing Program). In most cases, facilities shed load during DR events but there is significant heterogeneity in facility responses. Modeling facility response to dynamic price signals is beneficial to the Independent System Operator for scheduling supply to meet demand, to the utility for improving dynamic pricing programs, and to the customer for minimizing energy costs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Progress in studies of Electron-Cloud-Induced Optics Distortions at CESRTA

The Cornell Electron Storage Ring Test Accelerator (CesrTA) program has included extensive measurements of coherent betatron tune shifts for a variety of electron and positron beam energies, bunch population levels, and bunch train configurations. The tune shifts have been shown to result primarily from the interaction of the beam with the space-charge field of the beam-induced lowenergy electron cloud in the vacuum chamber. Comparison to several advanced electron cloud simulation program packages has allowed determination of the sensitivity of these measurements to physical parameters characterizing the synchrotron radiation flux, the production of photoelectrons on the vacuum chamberwall, the beam emittance, lattice optics,and the secondary-electron yield model. We report on progress in understanding the cloud buildup and decay mechanisms in magnetic fields and in field-free regions, addressing quantitatively the precise determination of the physical parameters of the modeling. Validation of these models will serve as essential input in the design of damping rings for future high-energy linear colliders.

43 PARTICLE ACCELERATORS↗

Fabricating Single Crystal Quantum Dot Solids

The central goal of this research program was to establish fundamental synthesis and processing principles to enable the fabrication of single crystal quantum dot solids (QDS) with programmable structure (i.e., hexagonal and square) and composition. Our approach towards that goal leveraged access to and experience with unique in-situ, multi-probe characterization techniques to understand and ultimately control the fundamental relationship between processing conditions and nucleation and growth of QDS. The program integrated synthesis and fabrication (Hanrath) with in-situ TEM analysis (Kourkoutis) and computational modeling (Clancy) to gain atomic-level insights into the underlying physical phenomena governing assembly and attachment and to guide the development of optimized processing methods. We have established a foundational understanding of physicochemical interactions of self-assembly at a fluid interface, superlattice structure transformation pathways, the critical role of disorder during the initial dimerization of colloidal quantum dot monomers, and the residual strain distribution within the inter-dot epitaxial bridge which hampers the formation of novel electronics states of the quantum dot solids. Collectively, these insights have contributed towards advancing the mechanistic understanding of the complex choreography of assembly and attachment as well as understanding what currently limits further advances in high-fidelity quantum dot solids and tiles.

36 MATERIALS SCIENCE↗

High-Performance Molecular Dynamics Simulation for Biological and Materials Sciences: Challenges of Performance Portability, Dallas, TX, November 2018.

Highly-optimized parallel molecular dynamics programs have allowed researchers to achieve ground-breaking results in biological and materials sciences. This type of performance has come at the expense of portability: a significant effort is required for performance optimization on each new architecture. Using a metric that emphasizes speedup, we assess key accelerating programming components of four different best-performing molecular dynamics programs - GROMACS, NAMD, LAMMPS and CP2K-- each having a particular scope of application, for contribution to performance and for portability. We use builds with and without these components, tested on HPC systems. We also analyze the code-bases to determine compliance with portability recommendations. We find that for all four programs, the contributions of the non-portable components to speed are essential to the programs' performances; without them we see a reduction in time-to-solution of a magnitude that is insufferable to domain scientists. This characterizes the performance efficiency that must be approached for good performance portability on a programmatic level, suggesting solutions to this difficult problem, which should come from developers, industry and funding institutions, and possibly new research in programming languages.

Computer Science↗

Progressive Damage Analysis of Post-Buckled Stiffened Panels under Static Compressive Loading

The validation of progressive damage analysis methods requires experimental data that captures the initiation of damage, its evolution with continued loading, and the morphology of damage throughout its evolution. In support of the NASA Advanced Composites Project, several validation specimens of increasing complexity have been tested and characterized in order to provide the data required to assess the capabilities of several progressive damage analysis methods for fiber-reinforced composite materials. The analytical capabilities of interest for this validation program include networks of interacting matrix cracks and delaminations in post-buckled stiffened structures. A series of single stringer compression specimens was tested and characterized at NASA Langley Research Center. The experimental data from these tests are compared with progressive damage finite element analysis results. Test/analysis comparisons are made in terms of load/displacement histories, damage morphology, and damage size versus load metrics.

Frank A Leone↗

Homeland security R&D roadmapping : risk-based methodological options.

The Department of Energy (DOE) National Laboratories support the Department of Homeland Security (DHS) in the development and execution of a research and development (R&D) strategy to improve the nation's preparedness against terrorist threats. Current approaches to planning and prioritization of DHS research decisions are informed by risk assessment tools and processes intended to allocate resources to programs that are likely to have the highest payoff. Early applications of such processes have faced challenges in several areas, including characterization of the intelligent adversary and linkage to strategic risk management decisions. The risk-based analysis initiatives at Sandia Laboratories could augment the methodologies currently being applied by the DHS and could support more credible R&D roadmapping for national homeland security programs. Implementation and execution issues facing homeland security R&D initiatives within the national laboratories emerged as a particular concern in this research.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗