Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plasma simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Validation of NSFsim as a Grad-Shafranov equilibrium solver at DIII-D

Plasma shape is a significant factor that must be considered for any Fusion Pilot Plant (FPP) as it has significant consequences for plasma stability and core confinement. A new simulator, NSFsim, has been developed based on a historically successful code, DINA [1], offering tools to simulate both transport and plasma shape. Specifically, NSFsim is a free boundary equilibrium and transport solver and has been configured to match the properties of the DIII-D tokamak. This paper is focused on validating the Grad-Shafranov (GS) solver of NSFsim by analyzing its ability to recreate the plasma shape, the poloidal flux distribution, and the measurements of the simulated diagnostic signals originating from flux loops and magnetic probes in DIII-D. Five different plasma shapes are simulated to show the robustness of NSFsim to different plasma conditions; these shapes are Lower Single Null (LSN), Upper Single Null (USN), Double Null (DN), Inner Wall Limited (IWL), and Negative Triangularity (NT). The NSFsim results are compared against real measured signals, magnetic profile fits from EFIT [2], and another plasma equilibrium simulator, GSevolve [3]. EFIT reconstructions of shots are readily available at DIII-D, but GSevolve was manually ran by us to provide simulation data to compare against.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic Physics of Homogeneous Turbulence in Collisionless Plasmas

We present results of large scale, fully kinetic 3D simulations of decaying plasma turbulence that span a range of scales from tens of ion gyroradii to the electron Debye length. A significant fraction of the dissipated energy is transferred to ions, in contrast to the scenario where the dominant dissipation is due to Landau damping of wave-like fluctuations. Intense current sheets are formed in the simulation with thicknesses over a range of scales approximately between electron and ion inertial scales. The rate of ion heating is well correlated with intermittency level. Geometrical analysis of the current sheets suggest that magnetic reconnection is active in the present simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computational simulation of coupled nonequilibrium discharge and compressible flow phenomena in a microplasma thruster

The microplasma thruster (MPT) concept is a simple extension of a cold gas micronozzle propulsion device, where a direct-current microdischarge is used to preheat the gas stream to improve the specific impulse of the device. Here we study a prototypical MPT device using a detailed, self-consistently coupled plasma and flow computational model. The model describes the microdischarge power deposition, plasma dynamics, gas-phase chemical kinetics, coupling of the plasma phenomena with high-speed flow, and overall propulsion system performance. Compared to a cold gas micronozzle, a significant increase in specific impulse is obtained from the power deposition in the diverging section of the MPT nozzle. For a discharge voltage of 750 V, a power input of 650 mW, and an argon mass flow rate of 5 SCCM (SCCM denotes cubic centimeter per minute at STP), the specific impulse of the device is increased by a factor of approx1.5 to about 74 s. The microdischarge remains mostly confined inside the micronozzle and operates in an abnormal glow discharge regime. Gas heating, primarily due to ion Joule heating, is found to have a strong influence on the overall discharge behavior. The study provides a validation of the MPT concept as a simple and effective approach to improve the performance of micronozzle cold gas propulsion devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gyrokinetic prediction of microtearing turbulence in standard tokamaks

First global gyrokinetic simulations of microtearing instabilities in ASDEX Upgrade geometry provide increasing evidence for the existence of these modes in standard tokamaks. It is found that even in only moderately large devices, nonlocal effects like profile shearing are negligible, supporting the use of an efficient flux-tube approach. Nonlinear gyrokinetic simulations show that the resulting level of magnetic electron heat flux can be experimentally relevant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Injection and transport properties of fast electrons in ultraintense laser-solid interactions

Fast electron injection and transport in solid foils irradiated by sub-picosecond-duration laser pulses with peak intensity equal to 4 Multiplication-Sign 10{sup 20} W/cm{sup 2} is investigated experimentally and via 3D simulations. The simulations are performed using a hybrid-particle-in-cell (PIC) code for a range of fast electron beam injection conditions, with and without inclusion of self-generated resistive magnetic fields. The resulting fast electron beam transport properties are used in rear-surface plasma expansion calculations to compare with measurements of proton acceleration, as a function of target thickness. An injection half-angle of {approx}50 Degree-Sign -70 Degree-Sign is inferred, which is significantly larger than that derived from previous experiments under similar conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Metal liner-driven quasi-isentropic compression of deuterium

Properties of degenerate hydrogen and deuterium (D) at pressures of the order of terapascals are of key interest to Planetary Science and Inertial Confinement Fusion. In order to recreate these conditions in the laboratory, we present a scheme, where a metal liner drives a cylindrically convergent quasi-isentropic compression in a D fill. We first determined an external pressure history for driving a self-similar implosion of a D shell from a fictitious flow simulation [D. S. Clark and M. Tabak, Nucl. Fusion 47, 1147 (2007)]. Then, it is shown that this D implosion can be recreated inside a beryllium liner by shaping the current pulse. For a peak current of 10.8 MA cold and nearly isochoric D is assembled at around 12 500 kg/m{sup 3}. Finally, our two-dimensional Gorgon simulations show the robustness of the implosion method to the magneto-Rayleigh-Taylor instability when using a sufficiently thick liner.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasilinear theory and particle-in-cell simulation of proton cyclotron instability

The electromagnetic ion (proton) cyclotron instability is important for regulating the excessive development of perpendicular temperature anisotropy in the solar wind, for instance, when it is compressed in the vicinity of the Earth's magnetosheath environment. A recent letter [Seough et al., Phys. Rev. Lett. 110, 071103 (2013)] successfully employed the quasilinear kinetic theory to explain the observed temperature anisotropy upper bound. The present paper rigorously examines the reliability of the quasilinear theory by making a direct comparison against results from the particle-in-cell simulation method. It is found that the quasilinear approach is indeed a valid first-cut theoretical tool in the study of proton cyclotron instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

BOUT++ nonlinear simulation for a comparative study with the measured 2D ELM structures in the KSTAR H-mode plasma

Here, time-dependent nonlinear simulation using the BOUT++ 3-field model is performed for a study of edge localized mode (ELM) dynamics in KSTAR H-mode plasmas. The simulated results of the ELM evolution are directly compared with the 2D ELM structures, measured by electron cyclotron emission imaging systems, from the initial growth to crash phase. The simulation results are qualitatively in good agreement with the observations. Specifically, it is notable in simulation and experiment that higher-n modes in a quasi-steady state phase evolve into lower-n modes close to the ELM-crash in time. It indicates that lower-n modes may be responsible for the onset of the crash. A postanalysis confirms that nonlinear mode coupling between toroidal harmonics may drive the lower-n mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Aspect-ratio effects in the driven, flux-core spheromak

Resistive magnetohydrodynamic simulations are used to evaluate the effects of the aspect ratio A (length to radius ratio) in a spheromak driven by coaxial helicity injection. The simulations are benchmarked against the Sustained Spheromak Physics Experiment (SSPX) [R. D. Wood et al., Nucl. Fusion 45, 1582 (2005)]. Amplification of the bias ('gun') poloidal flux is fitted well by a linear dependence (insensitive to A) on the ratio of gun current and bias flux above a threshold dependent on A. For low flux amplifications in the simulations, the n=1 mode is coherent and the mean-field geometry looks like a tilted spheromak. Because the mode has relatively large amplitude the field lines are open everywhere, allowing helicity penetration. Strongly driven helicity injection at A{<=}1.4 in simulations generates reconnection events which generate cathode-voltage spikes, relaxation of the symmetry-breaking modes, and open, stochastic magnetic field lines; this state is characteristic of SSPX. The time sequences of these events suggest that they are representative of a chaotic process. Near the spheromak tilt-mode limit, A{approx_equal}1.67 for a cylindrical flux conserver, the tilt approaches 90 deg.; reconnection events are not generated up to the strongest drives simulated. Implications for spheromak experiments are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The influence of magnetic field strength in ionization stage on ion transport between two stages of a double stage Hall thruster

It is futile for a double stage Hall thruster to design a special ionization stage if the ionized ions cannot enter the acceleration stage. Based on this viewpoint, the ion transport under different magnetic field strengths in the ionization stage is investigated, and the physical mechanisms affecting the ion transport are analyzed in this paper. With a combined experimental and particle-in-cell simulation study, it is found that the ion transport between two stages is chiefly affected by the potential well, the potential barrier, and the potential drop at the bottom of potential well. With the increase of magnetic field strength in the ionization stage, there is larger plasma density caused by larger potential well. Furthermore, the potential barrier near the intermediate electrode declines first and then rises up while the potential drop at the bottom of potential well rises up first and then declines as the magnetic field strength increases in the ionization stage. Consequently, both the ion current entering the acceleration stage and the total ion current ejected from the thruster rise up first and then decline as the magnetic field strength increases in the ionization stage. Therefore, there is an optimal magnetic field strength in the ionization stage to guide the ion transport between two stages.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid simulation of whistler excitation by electron beams in two-dimensional non-periodic domains

We present a two-dimensional hybrid fluid-PIC scheme for the simulation of whistler wave excitation by relativistic electron beams. This scheme includes a number of features which are novel to simulations of this type, including non-periodic boundary conditions and fresh particle injection. Results from our model suggest that non-periodicity of the simulation domain results in the development of fundamentally different wave characteristics than are observed in periodic domains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Active electron energy distribution function control in direct current discharge using an auxiliary electrode

The electron energy distribution functions are studied in the low voltage dc discharge with a constriction, which is a diaphragm with an opening. The dc discharge glows in helium and is sustained by the electron current emitted from a heated cathode. We performed kinetic simulations of dc discharge characteristics and electron energy distribution functions for different gas pressures (0.8 Torr-4 Torr) and discharge current of 0.1 A. The results of these simulations indicate the ability to control the shape of the electron energy distribution functions by variation of the diaphragm opening radius.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First demonstration of an asymmetric kinetic equilibrium for a thin current sheet

The modeling of steady state collisionless asymmetric tangential current layers is a challenging and poorly understood problem. For decades now, this difficulty has been limiting numerical models to approximate equilibria built with locally Maxwellian current layers and theoretical analyses to the very restricted Harris equilibrium. We show how the use of any distribution functions depending only on local macroscopic quantities results in a strong alteration of the current layer internal structure, which converges toward an unpredictable quasi-steady state with emission of ion scale perturbations. This transient can be explained in terms of ion kinetic and electron fluid physics. We demonstrate, for the first time, the validity of an asymmetric kinetic equilibrium model as well as its usability as an initial condition of hybrid kinetic simulations. This offers broad perspectives for the current sheet modeling, for which the early phase of instabilities can be studied within the kinetic formalism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron-cyclotron damping of helicon waves in low diverging magnetic fields

Particle-in-cell simulations are performed to investigate wave propagation and absorption behavior of low-field (B{sub 0}<5 mT) helicon waves in the presence of a diverging magnetic field. The 1D electromagnetic simulations, which include experimental external magnetic field profiles, provide strong evidence for electron-cyclotron damping of helicon waves in the spatially decaying nonuniform magnetic field. For a dipole-type magnetic field configuration, the helicon waves are absence in the downstream (lower field) region of the plasma and are observed to be completely absorbed. As the magnetic field is changed slightly however, wave damping decreases, and waves are able to propagate freely downstream, confirming previous experimental measurements of this phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic vortex growth in the transition layer of a mildly relativistic plasma shock

A two-dimensional particle simulation models the collision of two electron-ion plasma clouds along a quasiparallel magnetic field. The collision speed is 0.9c and the density ratio, 10. A current sheet forms at the front of the dense cloud, in which the electrons and the magnetic field reach energy equipartition with the ions. A structure composed of a solenoidal and a toroidal magnetic field grows in this sheet. It resembles the cross-section of the torus of a spheromak, which may provide the coherent magnetic fields in gamma-ray burst jets needed for their prompt emissions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implications of advanced collision operators for gyrokinetic simulation

In this paper, we explore both the potential improvements and pitfalls that arise when using advanced collision models in gyrokinetic simulations of plasma microinstabilities. Comparisons are made between the simple-but-standard electron Lorentz operator and specific variations of the advanced Sugama operator. The Sugama operator describes multi-species collisions including energy diffusion, momentum and energy conservation terms, and is valid for arbitrary wavelength. We report scans over collision frequency for both low and high ${k}_{\theta }{\rho }_{s}$ modes, with relevance for multiscale simulations that couple ion and electron scale physics. The influence of the ion–ion collision terms—not retained in the electron Lorentz model—on the damping of zonal flows is also explored. Collision frequency scans for linear and nonlinear simulations of ion-temperature-gradient instabilities including impurity ions are presented. Finally, implications for modeling turbulence in the highly collisional edge are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validating TRANSP simulations using neutron emission spectroscopy with dual sight lines

A method to generate modeled neutron spectra from bulk and fast ion distributions simulated by TRANSP has been developed. In this paper, modeled data generated from fuel ion distributions modeled with TRANSP is compared to measured data from two neutron spectrometers with different lines of sight; TOFOR with a radial one and the MPRu with a tangential one. The information obtained from the analysis of the measured neutron spectra such as the relative intensity of the emission from different ion populations places additional constraints on the simulation and can be used to adjust the parameters of the simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Corrected Article: 'An error-controlled fast multipole method' [J. Chem. Phys. 131, 244102 (2009)]

We present a two-stage error estimation scheme for the fast multipole method (FMM). This scheme can be applied to any particle system. It incorporates homogeneous as well as inhomogeneous distributions. The FMM error as a consequence of the finite representation of the multipole expansions and the operator error is correlated with an absolute or relative user-requested energy threshold. Such a reliable error control is the basis for making reliable simulations in computational physics. Our FMM program on the basis of the two-stage error estimation scheme is available on request.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗