Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Performance prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Predicted Heat Flux Performance of Actively Cooled Tungsten-Armored Graphitic Foam Monoblocks

Tungsten (W)–armored graphitic foam monoblocks were developed for applications requiring high-Z plasma-facing material in long-pulse fusion experiments and ultimately deuterium-tritium fusion reactors. The monoblocks are an integrated material system combining the advantages of a chemical vapor deposited (CVD) W coating with a high-conductivity graphitic foam. The W is a high-melting-point, high-Z material with low tritium retention. The graphitic foam coupled to a swirl tube serves as a high-thermal-conductivity heat sink that cannot melt, although it can sublime at much higher temperatures than copper melts. Together, they comprise a robust plasma-facing component (PFC) weighing roughly 5% of an all-W component or 17% of a traditional W-coated copper heat sink.A single-channel mock-up consisting of four graphitic foam monoblocks equipped with a water-cooled swirl tube was fabricated for eventual testing in the 60-kW, EB-60, rastered electron beam at the Applied Research Laboratory of The Pennsylvania State University. Two monoblocks have a thin 50-μm-thick coating of pure W chemically vapor deposited over NbC and pure Nb interlayers. Two others have a 2-mm-thick pure W coating CVD on graphitic monoblocks using the same interlayers. The mock-up will be cooled with available 10 m/s, 0.7 MPa water with a 22°C inlet temperature and subjected to varying uniform heat loads up to 20 MW/m 2 . It is equipped with type-K thermocouples at various depths, and calibrated infrared thermography and spot pyrometry will be used to characterize the heated surface. Real-time water calorimetry will be used to ascertain the absorbed steady-state power and infer the heat flux during testing. Since testing cannot be done under prototypic divertor flow conditions, it is necessary to predict the thermal response of this novel PFC system and investigate the power sharing between radiation and convection at divertor heat flux levels and its inherent ability to avoid critical heat flux. Results are reported for predictions obtained from computational fluid dynamics models up to 30 MW/m 2 of steady-state uniform heat flux. Leading-edge heat loads of 30 MW/m 2 on a 2-mm-wide side strip were also investigated to ascertain if coating delamination is likely.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A first principles framework to predict the transient performance of latent heat thermal energy storage

Thermal energy storage (TES) is increasingly recognized as an essential component of efficient Combined Heat and Power (CHP), Concentrated Solar Power (CSP), Heating Ventilation and Air Conditioning (HVAC), and refrigeration as it reduces peak demand while helping to manage intermittent availability of energy (e.g., from solar or wind). Latent Heat Thermal Energy Storage (LHTES) is a viable option because of its high energy storage density. Parametric analysis of LHTES in terms of dimensionless numbers is highly desired as a tool to model LHTES systems. One approach is to develop a model equation so as to minimize the error between the model and data obtained from experiments or simulations. While this approach can produce an accurate correlation applicable within the range of data used for its creation, it does not provide physical understanding of the rate-limiting process controlling the transient behavior of the device. In this paper we present an alternative approach whereby the potential rate-limiting processes are identified from first principles and then the key process is determined as a function of time as a LHTES device is charged. For example, in a simple geometry, the melt-fraction can be expected to vary linearly in time if the heat transfer rate is limited by natural convection of the phase changing material and we show it scales with the PCM Grashof number as $Gr^1_p$ and PCM Prandtl number as $Pr_p^{(1/3)}$. On the other hand, if surface area of solid PCM limits the heat transfer rate, the melt fraction increases asymptotically to reach full melting. The existence of these linear and asymptotic regions and the $Gr^1_pP r^{1/3}_p$ shape of the melt fraction curve is verified using our database of 64 simulations. Of practical importance in designing LHTES devices is the melt fraction at which the heat transfer rate ceases to be limited by convection, after which the heat storage rate deteriorates. For our geometry, this is found to be about 90%. This test case of our methodology shows the value of our approach, that predicting heat storage rate based on the rate-limiting physical phenomenon as a function of time is an effective approach to modeling LHTES devices.

25 ENERGY STORAGE↗
DOE OSTI2020

Predicting Execution Times for Disk-based and In-Situ Parallel Data Analytics (Final Technical Report)

In recent years, there has been a significant amount of interests in in-situ analytics on simulation programs. For a variety of reasons, it is desirable to be able to predict the execution time of an analytics program. At the same time, frameworks such as MapReduce have become popular for scientific data analytics. This paper focuses on developing performance models for predicting execution time of parallel data analytics, with a special emphasis on in-situ analytics. We take two distinct approach towards performance prediction. We first expand SKOPE (a SKeleton framewOrk for Performance Exploration) with performance models for disk data read, cache performance, and page fault penalty. Second, an analytical performance model is also developed. We have evaluated our performance prediction framework as well as the analytical model on three hardware setups with well-known data mining algorithms implemented in three programming paradigms, MapReduce, MATE (a MapReduce-like parallel system with an alternate API for multi-core environments) and Smart (a MapReduce-like framework for in-situ analytics). Results show that our performance prediction framework along with the incorporated performance models are capable of accurately predicting execution times for parallel scientific analytics on different hardware setups.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Recurrent neural networks for short-term and long-term prediction of geothermal reservoirs

Accurate prediction of geothermal reservoir responses to alternative energy production scenarios is critical for optimizing the development of the underlying resources. While the conventional physics-based models offer a comprehensive prediction tool, data-driven models provide an efficient alternative to build fit-for-purpose predictive models by extracting and using the statistical patterns in the collected data to make predictions. The recurrent neural network (RNN) is a data-driven model that is commonly applied to predict time series sequences. This paper presents a variant of RNN that also utilizes the efficiency of convolutional neural networks (CNN) for the prediction of energy production from geothermal reservoirs. Specifically, a CNN–RNN architecture is developed that takes historical well controls as input (features) and their corresponding production response data as output (labels) to learn an input-output mapping that can predict the future well production responses/performance for any given future well control inputs. The model is paired with a labeling scheme to handle real field disturbances that create data gaps. In addition to the model structure, we introduce a thorough workflow for applying the model, which includes data pre-processing, feature selection, as well as different training strategies for short-term and long-term prediction. Finally, the performance and accuracy of the model are evaluated by applying it to multiple datasets, including a field reservoir model.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Relating Solvent Parameters to Electrochemical Properties to Predict the Electrochemical Performance of Vanadium Acetylacetonate for Non-Aqueous Redox Flow Batteries

Non-aqueous redox flow batteries have shown promise for applications in grid energy storage. Increasing the efficiency of these batteries by developing the electrolyte chemistries is needed. Herein, we investigate the correlation between solvent properties and the electrochemical parameters of vanadium acetylacetonate V(acac) 3 . Using cyclic voltammetry (CV) and rotating disk electrode experiments (RDE), we show that trends in the performance of the V(acac) 3 kinetics are directly related to solvent properties. In this study, we found strong relationships between the solvents polarity, viscosity, and donor number with the electrochemical behavior of V(acac) 3 in terms of the electrochemical working widow, electron kinetics and stability towards cycling. Based on these finding, we also demonstrate how solvent selection can be improved with limited a priori knowledge.

25 ENERGY STORAGE↗
DOE OSTI2021

Development of physically transparent, predictive structure-performance relationships for rational design of multi-component catalytic materials. Final Report

Solid surfaces act as catalysts for many important chemical processes, including commodity chemicals production, energy conversion and pollution mitigation. The outcome of catalytic processes is mainly governed by interactions of adsorbates with active sites on the catalyst surface. These interactions can be dramatically affected by the changes in the local characteristics of the active site, which can be accomplished by an introduction of various promoters and poisons, or by alloying with other metal atoms. In fact, many commercial heterogeneous catalysts contain metal nanoparticles promoted by various additives. Our goal is to develop fundamental understanding about the impact of perturbations in the local geometry of a catalytic site on the local surface reactivity. These insights are crucial for a more systematic and rational catalyst design. The project aims to advance the field of catalysis by formulating reliable structure/performance relationships and utilizing these relationships to identify novel catalytic materials. Benefits for DOE and our society are in the development of fundamental theories that guide the process of discovery of energy-efficient and environmentally friendly heterogeneous catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Evaluation of Envelope Energy in a High-Performance Manufactured Home in California

There are important applications for a robust energy model for new construction manufactured homes that can characterize the individual performance of the opaque wall and ceiling components of the building envelope. The efficacy of different insulation materials can be assessed with the confidence that modeled performance will closely predict installed performance. This study uses careful calibration of a standard energy model with a short-term co-heating test in an installed manufactured home to de-aggregate the contributions of planar wall sections from overall building envelope thermal resistance. The methodology takes into account thermal mass effects, solar gains, and physical adjustments to the structure to achieve successful calibration and to inform adjustments to the test procedure for future study.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Online System ID for Predicting Power Plant Performance Throughout Cycling Operations

This presentation represents a review of the background research conducted by NETL to apply artificial intelligence, i.e. auto-recursive algorithms and data analytics to detect leaks in utility scale boilers and laboratory power systems. The new project being funded by the Advanced Sensors and Controls Program is part of the Field Work Proposal funded in EY21 as Task 53 to demonstrate the application of these techniques on a utility scale power system.

Shadle, Lawrence↗
NASA NTRS1971

Solid Rocket Motor Performance Analysis and Prediction

Current design practices are reviewed and assessed, and guidance is established for achieving greater consistency in design, reliability in the end product, and efficiency in the design effort. The total problem is discussed, and design elements involved in successful design are identified. Design criteria are described, and the rule, guide, limitation, or standard which must be imposed on each essential design element is given. Recommended practices are presented for satisfying each of the criteria.

Source record↗
NASA NTRS1973

An injector design model for predicting rocket engine performance and heat transfer

A model is formulated for estimating the performance and chamber heat transfer in rocket injectors/chambers operating with gaseous H2-O2 propellants. The model quantifies the combustion performance and chamber heat flux for variables such as chamber length, element type, element area ratio, impingement angle, thrust/element, mixture ratio, moment ratio, element spacing, and physical size. Design equations are given and curves are plotted for evaluation of combustion performance in injectors comprised of F-O-F triplet, premix, coaxial and swirl coaxial element types. Curve plots and equations are also included for estimation of the chamber wall heat fluxes generated by these element types.

Calhoon, D. F.↗
NASA NTRS1977

Analytical prediction of the performance and stability of a J85-13 compressor with distorted inlet flow

The parallel compressor concept was studied using a compressor model based on the overall clean-inlet performance map obtained from experimental tests in an altitude chamber using a General Electric J85-13 turbojet engine. The model, which includes a static-pressure balance calculation at compressor discharge, was exercised at conditions corresponding to 10 different screen-induced distortion patterns included in the experimental data base. The spoiled area of these patterns ranged from 30 deg to 180 deg, and the distortion screen density, or the area blocked by the screen wire per unit area of screen, varied from 26 to 69 percent. The study indicates that at the higher corrected speeds, the analytical surge lines obtained are good representations of the corresponding experimental surge lines and are independent of distortion angle or distortion angle or distortion level.

Milner, E. J.↗
NASA NTRS1978

Repeated observation of an uncertain signal

The focus here is on sensory adaptation, or progressively more appropriate attention, as repeated observations yield more information about a signal with an uncertain parameter. The signal was a brief sinusoid; its uncertain parameter was frequency. Detection performance is predicted from data on a signal of known and constant frequency, as a function of the number of frequencies the uncertain signal could assume. A comparison condition presented a signal that varied in a manner not permitting adaptation. Models derived from signal detection theory describe the ideal observation processes for the three signal conditions, and supply quantitative predictions of relative performances. The models are generally supported by the data.

Swets, J. A.↗
NASA NTRS1980

Comparison of predicted and experimental performance of large-bore roller bearing operating to 3.0 million DN

Bearing inner and outer race temperatures and the amount of heat transferred to the lubricant were calculated by using the computer program CYBEAN. The results obtained were compared with previously reported experimental data for a 118 mm bore roller bearing that operated at shaft speeds to 25,500 rpm, radial loads to 8,900 N (2000 lb), and total lubricant flow rates to 0.0102 cu m/min (2.7 gal/min). The calculated results compared well with the experimental data.

Coe, H. H.↗
NASA NTRS1981

Recent Progress Towards Predicting Aircraft Ground Handling Performance

The significant progress which has been achieved in development of aircraft ground handling simulation capability is reviewed and additional improvements in software modeling identified. The problem associated with providing necessary simulator input data for adequate modeling of aircraft tire/runway friction behavior is discussed and efforts to improve this complex model, and hence simulator fidelity, are described. Aircraft braking performance data obtained on several wet runway surfaces is compared to ground vehicle friction measurements and, by use of empirically derived methods, good agreement between actual and estimated aircraft braking friction from ground vehilce data is shown. The performance of a relatively new friction measuring device, the friction tester, showed great promise in providing data applicable to aircraft friction performance. Additional research efforts to improve methods of predicting tire friction performance are discussed including use of an instrumented tire test vehicle to expand the tire friction data bank and a study of surface texture measurement techniques.

Yager, T. J.↗